diff --git a/res/translations/mixxx.ts b/res/translations/mixxx.ts index e5883efa7f3..ae3a2305591 100644 --- a/res/translations/mixxx.ts +++ b/res/translations/mixxx.ts @@ -12,22 +12,22 @@ AutoDJFeature - + Crates - + Remove Crate as Track Source - + Auto DJ - + Add Crate as Track Source @@ -401,7 +401,7 @@ - + Fetching image ... Tooltip text on the cover art column shown when the cover is read from disk @@ -7815,7 +7815,7 @@ Select from different types of displays for the waveform, which differ primarily - + Fetching track data from the MusicBrainz database @@ -7892,72 +7892,67 @@ Select from different types of displays for the waveform, which differ primarily - + Original tags - + Metadata applied - + %1 - - Could not find this track in the MusicBrainz database. - - - - + Suggested tags - + The results are ready to be applied - + Can't connect to %1: %2 - + Looking for cover art - + Cover art found, receiving image. - + Cover Art is not available for selected metadata - + Metadata & Cover Art applied - + Selected cover art applied - + Cover Art File Already Exists - + File: %1 Folder: %2 Override existing file? @@ -9179,7 +9174,7 @@ Do you want to select an input device? - + Playlists @@ -9189,27 +9184,27 @@ Do you want to select an input device? - + Playlists are ordered lists of tracks that allow you to plan your DJ sets. - + It may be necessary to skip some tracks in your prepared playlist or add some different tracks in order to maintain the energy of your audience. - + Some DJs construct playlists before they perform live, but others prefer to build them on-the-fly. - + When using a playlist during a live DJ set, remember to always pay close attention to how your audience reacts to the music you've chosen to play. - + Create New Playlist @@ -9766,32 +9761,32 @@ With width at zero, this allows for manually sweeping over the entire delay rang - + Metronome - + Adds a metronome click sound to the stream - + BPM - + Set the beats per minute value of the click sound - + Sync - + Synchronizes the BPM with the track if it can be retrieved @@ -11323,12 +11318,27 @@ Hint: compensates "chipmunk" or "growling" voices - - Identifying track through Acoustid + + Reading track for fingerprinting failed. + + + + + Identifying track through AcoustID + + + + + Could not identify track through AcoustID. + + + + + Could not find this track in the MusicBrainz database. - + Retrieving metadata from MusicBrainz @@ -11386,1671 +11396,1676 @@ Hint: compensates "chipmunk" or "growling" voices - - Use the mouse to scratch, spin-back or throw tracks. + + Left click and hold allows to preview the position where the play head will jump to on release. Dragging can be aborted with right click. + Use the mouse to scratch, spin-back or throw tracks. + + + + Waveform Display - + Shows the loaded track's waveform near the playback position. - + Drag with mouse to make temporary pitch adjustments. - + Scroll to change the waveform zoom level. - + Waveform Zoom Out - + Waveform Zoom In - + Waveform Zoom - - + + Spinning Vinyl - + Rotates during playback and shows the position of a track. - + Right click to show cover art of loaded track. - + Gain - + Adjusts the pre-fader gain of the track (to avoid clipping). - + (too loud for the hardware and is being distorted). - + Indicates when the signal on the channel is clipping, - + Channel Volume Meter - + Shows the current channel volume. - + Microphone Volume Meter - + Shows the current microphone volume. - + Auxiliary Volume Meter - + Shows the current auxiliary volume. - + Auxiliary Peak Indicator - + Indicates when the signal on the auxiliary is clipping, - + Volume Control - + Adjusts the volume of the selected channel. - + Booth Gain - + Adjusts the booth output gain. - + Crossfader - + Balance - + Headphone Volume - + Adjusts the headphone output volume. - + Headphone Gain - + Adjusts the headphone output gain. - + Headphone Mix - + Headphone Split Cue - + Adjust the Headphone Mix so in the left channel is not the pure cueing signal. - + Microphone - + Show/hide the Microphone section. - + Sampler - + Show/hide the Sampler section. - + Vinyl Control - + Show/hide the Vinyl Control section. - + Preview Deck - + Show/hide the Preview deck. - - - + + + Cover Art - + Show/hide Cover Art. - + Toggle 4 Decks - + Switches between showing 2 decks and 4 decks. - + Show Library - + Show or hide the track library. - + Show Effects - + Show or hide the effects. - + Toggle Mixer - + Show or hide the mixer. - + Show/hide volume meters for channels and main output. - + Microphone Volume - + Adjusts the microphone volume. - + Microphone Gain - + Adjusts the pre-fader microphone gain. - + Auxiliary Gain - + Adjusts the pre-fader auxiliary gain. - + Microphone Talk-Over - + Hold-to-talk or short click for latching to - + Microphone Talkover Mode - + Off: Do not reduce music volume - + Manual: Reduce music volume by a fixed amount set by the Strength knob. - + Behavior depends on Microphone Talkover Mode: - + Off: Does nothing - + Change the step-size in the Preferences -> Decks menu. - + Raise Pitch - + Sets the pitch higher. - + Sets the pitch higher in small steps. - + Lower Pitch - + Sets the pitch lower. - + Sets the pitch lower in small steps. - + Raise Pitch Temporary (Nudge) - + Holds the pitch higher while active. - + Holds the pitch higher (small amount) while active. - + Lower Pitch Temporary (Nudge) - + Holds the pitch lower while active. - + Holds the pitch lower (small amount) while active. - + Low EQ - + Adjusts the gain of the low EQ filter. - + Mid EQ - + Adjusts the gain of the mid EQ filter. - + High EQ - + Adjusts the gain of the high EQ filter. - + Hold-to-kill or short click for latching. - + High EQ Kill - + Holds the gain of the high EQ to zero while active. - + Mid EQ Kill - + Holds the gain of the mid EQ to zero while active. - + Low EQ Kill - + Holds the gain of the low EQ to zero while active. - + Displays the tempo of the loaded track in BPM (beats per minute). - + Tempo - + Key The musical key of a track - + BPM Tap - - + + When tapped repeatedly, adjusts the BPM to match the tapped BPM. - + Adjust BPM Down - + When tapped, adjusts the average BPM down by a small amount. - + Adjust BPM Up - + When tapped, adjusts the average BPM up by a small amount. - + Adjust Beats Earlier - + When tapped, moves the beatgrid left by a small amount. - + Adjust Beats Later - + When tapped, moves the beatgrid right by a small amount. - + Tempo and BPM Tap - + Show/hide the spinning vinyl section. - + Keylock - + Toggling keylock during playback may result in a momentary audio glitch. - + Toggle visibility of Loop Controls - + Toggle visibility of Beatjump Controls - + Toggle visibility of Rate Control - + Toggle visibility of Key Controls - + (while previewing) - + Places a cue point at the current position on the waveform. - + Stops track at cue point, OR go to cue point and play after release (CUP mode). - + Set cue point (Pioneer/Mixxx/Numark mode), set cue point and play after release (CUP mode) OR preview from it (Denon mode). - + Is latching the playing state. - + Seeks the track to the cue point and stops. - + Play - + Plays track from the cue point. - + Sends the selected channel's audio to the headphone output, selected in Preferences -> Sound Hardware. - + (This skin should be updated to use Sync Lock!) - + Enable Sync Lock - + Tap to sync the tempo to other playing tracks or the sync leader. - + Enable Sync Leader - + When enabled, this device will serve as the sync leader for all other decks. - + This is relevant when a dynamic tempo track is loaded to a sync leader deck.In that case, other synced devices will adopt the changing tempo. - + Changes the track playback speed (affects both the tempo and the pitch). If keylock is enabled, only the tempo is affected. - + Tempo Range Display - + Displays the current range of the tempo slider. - + Un-ejects when no track is loaded, i.e. reloads the track that was ejected last (of any deck). - + If hotcue is a loop cue, toggles the loop and jumps to if the loop is behind the play position. - + If the play position is inside an active loop, stores the loop as loop cue. - + Delete selected hotcue. - + Track Comment - + Displays the comment tag of the loaded track. - + Opens separate artwork viewer. - + Effect Chain Preset Settings - + Show the effect chain settings menu for this unit. - + Select and configure a hardware device for this input - + Recording Duration - + Big Spinny/Cover Art - + Show a big version of the Spinny or track cover art if enabled. - + Main Output Peak Indicator - + Indicates when the signal on the main output is clipping, - + Main Output L Peak Indicator - + Indicates when the left signal on the main output is clipping, - + Main Output R Peak Indicator - + Indicates when the right signal on the main output is clipping, - + Main Channel L Volume Meter - + Shows the current volume for the left channel of the main output. - + Shows the current volume for the right channel of the main output. - - + + Main Output Gain - - + + Adjusts the main output gain. - + Determines the main output by fading between the left and right channels. - + Adjusts the left/right channel balance on the main output. - + Crossfades the headphone output between the main mix and cueing (PFL or Pre-Fader Listening) signal. - + If activated, the main mix signal plays in the right channel, while the cueing signal plays in the left channel. - + Show/hide Cover Art of the selected track in the library. - + Show/hide the scrolling waveforms - + Show/hide the beatgrid controls section - + Hide all skin sections except the decks to have more screen space for the track library. - + Volume Meters - + mix microphone input into the main output. - + Auto: Automatically reduce music volume when microphone volume rises above threshold. - - + + Adjust the amount the music volume is reduced with the Strength knob. - + Auto: Sets how much to reduce the music volume when the volume of active microphones rises above threshold. - + Manual: Sets how much to reduce the music volume, when talkover is activated regardless of volume of microphone inputs. - + Shift cues earlier - - + + Shift cues imported from Serato or Rekordbox if they are slightly off time. - + Left click: shift 10 milliseconds earlier - + Right click: shift 1 millisecond earlier - + Shift cues later - + Left click: shift 10 milliseconds later - + Right click: shift 1 millisecond later - + Mutes the selected channel's audio in the main output. - + Main mix enable - + Hold or short click for latching to mix this input into the main output. - + Displays the duration of the running recording. - + Auto DJ is active - + Hot Cue - Track will seek to nearest previous hotcue point. - + Sets the track Loop-In Marker to the current play position. - + Press and hold to move Loop-In Marker. - + Jump to Loop-In Marker. - + Sets the track Loop-Out Marker to the current play position. - + Press and hold to move Loop-Out Marker. - + Jump to Loop-Out Marker. - + Beatloop Size - + Select the size of the loop in beats to set with the Beatloop button. - + Changing this resizes the loop if the loop already matches this size. - + Halve the size of an existing beatloop, or halve the size of the next beatloop set with the Beatloop button. - + Double the size of an existing beatloop, or double the size of the next beatloop set with the Beatloop button. - + Start a loop over the set number of beats. - + Temporarily enable a rolling loop over the set number of beats. - + Beatjump/Loop Move Size - + Select the number of beats to jump or move the loop with the Beatjump Forward/Backward buttons. - + Beatjump Forward - + Jump forward by the set number of beats. - + Move the loop forward by the set number of beats. - + Jump forward by 1 beat. - + Move the loop forward by 1 beat. - + Beatjump Backward - + Jump backward by the set number of beats. - + Move the loop backward by the set number of beats. - + Jump backward by 1 beat. - + Move the loop backward by 1 beat. - + Reloop - + If the loop is ahead of the current position, looping will start when the loop is reached. - + Works only if Loop-In and Loop-Out Marker are set. - + Enable loop, jump to Loop-In Marker, and stop playback. - + Displays the elapsed and/or remaining time of the track loaded. - + Click to toggle between time elapsed/remaining time/both. - + Hint: Change the time format in Preferences -> Decks. - + Show/hide intro & outro markers and associated buttons. - + Intro Start Marker - - - - + + + + If marker is set, jumps to the marker. - - - - - - If marker is not set, sets the marker to the current play position. - - + If marker is not set, sets the marker to the current play position. + + + + + + + If marker is set, clears the marker. - + Intro End Marker - + Outro Start Marker - + Outro End Marker - + Mix - + Adjust the mixing of the dry (input) signal with the wet (output) signal of the effect unit - + D/W mode: Crossfade between dry and wet - + D+W mode: Add wet to dry - + Mix Mode - + Adjust how the dry (input) signal is mixed with the wet (output) signal of the effect unit - + Dry/Wet mode (crossed lines): Mix knob crossfades between dry and wet Use this to change the sound of the track with EQ and filter effects. - + Dry+Wet mode (flat dry line): Mix knob adds wet to dry Use this to change only the effected (wet) signal with EQ and filter effects. - + Route the main mix through this effect unit. - + Route the left crossfader bus through this effect unit. - + Route the right crossfader bus through this effect unit. - + Right side active: parameter moves with right half of Meta Knob turn - + Skin Settings Menu - + Show/hide skin settings menu - + Save Sampler Bank - + Save the collection of samples loaded in the samplers. - + Load Sampler Bank - + Load a previously saved collection of samples into the samplers. - + Show Effect Parameters - + Enable Effect - + Meta Knob Link - + Set how this parameter is linked to the effect's Meta Knob. - + Meta Knob Link Inversion - + Inverts the direction this parameter moves when turning the effect's Meta Knob. - + Super Knob - + Next Chain - + Previous Chain - + Next/Previous Chain - + Clear - + Clear the current effect. - + Toggle - + Toggle the current effect. - + Next - + Clear Unit - + Clear effect unit. - + Show/hide parameters for effects in this unit. - + Toggle Unit - + Enable or disable this whole effect unit. - + Controls the Meta Knob of all effects in this unit together. - + Load next effect chain preset into this effect unit. - + Load previous effect chain preset into this effect unit. - + Load next or previous effect chain preset into this effect unit. - - - - - - - - - + + + + + + + + + Assign Effect Unit - + Assign this effect unit to the channel output. - + Route the headphone channel through this effect unit. - + Route this deck through the indicated effect unit. - + Route this sampler through the indicated effect unit. - + Route this microphone through the indicated effect unit. - + Route this auxiliary input through the indicated effect unit. - + The effect unit must also be assigned to a deck or other sound source to hear the effect. - + Switch to the next effect. - + Previous - + Switch to the previous effect. - + Next or Previous - + Switch to either the next or previous effect. - + Meta Knob - + Controls linked parameters of this effect - + Effect Focus Button - + Focuses this effect. - + Unfocuses this effect. - + Refer to the web page on the Mixxx wiki for your controller for more information. - + Effect Parameter - + Adjusts a parameter of the effect. - + Inactive: parameter not linked - + Active: parameter moves with Meta Knob - + Left side active: parameter moves with left half of Meta Knob turn - + Left and right side active: parameter moves across range with half of Meta Knob turn and back with the other half - - + + Equalizer Parameter Kill - - + + Holds the gain of the EQ to zero while active. - + Quick Effect Super Knob - + Quick Effect Super Knob (control linked effect parameters). - + Hint: Change the default Quick Effect mode in Preferences -> Equalizers. - + Equalizer Parameter - + Adjusts the gain of the EQ filter. - + Hint: Change the default EQ mode in Preferences -> Equalizers. - - + + Adjust Beatgrid - + Adjust beatgrid so the closest beat is aligned with the current play position. - - + + Adjust beatgrid to match another playing deck. - + If quantize is enabled, snaps to the nearest beat. - + Quantize - + Toggles quantization. - + Loops and cues snap to the nearest beat when quantization is enabled. - + Reverse - + Reverses track playback during regular playback. - + Puts a track into reverse while being held (Censor). - + Playback continues where the track would have been if it had not been temporarily reversed. - - - + + + Play/Pause - + Jumps to the beginning of the track. - + Syncs the tempo (BPM) and phase to that of the other track, if BPM is detected on both. - + Syncs the tempo (BPM) to that of the other track, if BPM is detected on both. - + Sync and Reset Key - + Increases the pitch by one semitone. - + Decreases the pitch by one semitone. - + Enable Vinyl Control - + When disabled, the track is controlled by Mixxx playback controls. - + When enabled, the track responds to external vinyl control. - + Enable Passthrough - + Indicates that the audio buffer is too small to do all audio processing. - + Displays cover artwork of the loaded track. - + Displays options for editing cover artwork. - + Star Rating - + Assign ratings to individual tracks by clicking the stars. - + Channel Peak Indicator @@ -13070,143 +13085,143 @@ Use this to change only the effected (wet) signal with EQ and filter effects. - + Right click hotcues to edit their labels and colors. - + Right click anywhere else to show the time at that point. - + Channel L Peak Indicator - + Indicates when the left signal on the channel is clipping, - + Channel R Peak Indicator - + Indicates when the right signal on the channel is clipping, - + Channel L Volume Meter - + Shows the current channel volume for the left channel. - + Channel R Volume Meter - + Shows the current channel volume for the right channel. - + Microphone Peak Indicator - + Indicates when the signal on the microphone is clipping, - + Sampler Volume Meter - + Shows the current sampler volume. - + Sampler Peak Indicator - + Indicates when the signal on the sampler is clipping, - + Preview Deck Volume Meter - + Shows the current Preview Deck volume. - + Preview Deck Peak Indicator - + Indicates when the signal on the Preview Deck is clipping, - + Maximize Library - + Microphone Talkover Ducking Strength - + Prevents the pitch from changing when the rate changes. - + Changes the number of hotcue buttons displayed in the deck - + Starts playing from the beginning of the track. - + Jumps to the beginning of the track and stops. - - + + Plays or pauses the track. - + (while playing) @@ -13221,220 +13236,220 @@ Use this to change only the effected (wet) signal with EQ and filter effects. - + Main Channel R Volume Meter - + (while stopped) - + Cue - + Headphone - + Mute - + Old Synchronize - + Syncs to the first deck (in numerical order) that is playing a track and has a BPM. - + If no deck is playing, syncs to the first deck that has a BPM. - + Decks can't sync to samplers and samplers can only sync to decks. - + Hold for at least a second to enable sync lock for this deck. - + Decks with sync locked will all play at the same tempo, and decks that also have quantize enabled will always have their beats lined up. - + Resets the key to the original track key. - + Speed Control - - - + + + Changes the track pitch independent of the tempo. - + Increases the pitch by 10 cents. - + Decreases the pitch by 10 cents. - + Pitch Adjust - + Adjust the pitch in addition to the speed slider pitch. - + Opens a menu to clear hotcues or edit their labels and colors. - + Record Mix - + Toggle mix recording. - + Enable Live Broadcasting - + Stream your mix over the Internet. - + Provides visual feedback for Live Broadcasting status: - + disabled, connecting, connected, failure. - + When enabled, the deck directly plays the audio arriving on the vinyl input. - + Blue for passthrough enabled. - + Playback will resume where the track would have been if it had not entered the loop. - + Loop Exit - + Turns the current loop off. - + Slip Mode - + When active, the playback continues muted in the background during a loop, reverse, scratch etc. - + Once disabled, the audible playback will resume where the track would have been. - + Track Key The musical key of a track - + Displays the musical key of the loaded track. - + Clock - + Displays the current time. - + Audio Latency Usage Meter - + Displays the fraction of latency used for audio processing. - + A high value indicates that audible glitches are likely. - + Do not enable keylock, effects or additional decks in this situation. - + Audio Latency Overload Indicator - + If Vinyl control is enabled, displays time-coded vinyl signal quality (see Preferences -> Vinyl Control). @@ -13444,289 +13459,289 @@ Use this to change only the effected (wet) signal with EQ and filter effects. - + Change the crossfader curve in Preferences -> Crossfader - + Crossfader Orientation - + Set the channel's crossfader orientation. - + Either to the left side of crossfader, to the right side or to the center (unaffected by crossfader) - + Activate Vinyl Control from the Menu -> Options. - + Displays the current musical key of the loaded track after pitch shifting. - + Fast Rewind - + Fast rewind through the track. - + Fast Forward - + Fast forward through the track. - + Jumps to the end of the track. - + Sets the pitch to a key that allows a harmonic transition from the other track. Requires a detected key on both involved decks. - - - + + + Pitch Control - + Pitch Rate - + Displays the current playback rate of the track. - + Repeat - + When active the track will repeat if you go past the end or reverse before the start. - + Eject - + Ejects track from the player. - + Hotcue - + If hotcue is set, jumps to the hotcue. - + If hotcue is not set, sets the hotcue to the current play position. - + Vinyl Control Mode - + Absolute mode - track position equals needle position and speed. - + Relative mode - track speed equals needle speed regardless of needle position. - + Constant mode - track speed equals last known-steady speed regardless of needle input. - + Vinyl Status - + Provides visual feedback for vinyl control status: - + Green for control enabled. - + Blinking yellow for when the needle reaches the end of the record. - + Loop-In Marker - + Loop-Out Marker - + Loop Halve - + Halves the current loop's length by moving the end marker. - + Deck immediately loops if past the new endpoint. - + Loop Double - + Doubles the current loop's length by moving the end marker. - + Beatloop - + Toggles the current loop on or off. - + Works only if Loop-In and Loop-Out marker are set. - + Hint: Change the default cue mode in Preferences -> Interface. - + Vinyl Cueing Mode - + Determines how cue points are treated in vinyl control Relative mode: - + Off - Cue points ignored. - + One Cue - If needle is dropped after the cue point, track will seek to that cue point. - + Track Time - + Track Duration - + Displays the duration of the loaded track. - + Information is loaded from the track's metadata tags. - + Track Artist - + Displays the artist of the loaded track. - + Track Title - + Displays the title of the loaded track. - + Track Album - + Displays the album name of the loaded track. - + Track Artist/Title - + Displays the artist and title of the loaded track. @@ -13767,27 +13782,27 @@ Use this to change only the effected (wet) signal with EQ and filter effects. - + &Overwrite - + Over&write All - + &Skip - + Skip &All - + Export Error @@ -13795,7 +13810,7 @@ Use this to change only the effected (wet) signal with EQ and filter effects. TrackExportWizard - + Export Track Files To @@ -13803,23 +13818,23 @@ Use this to change only the effected (wet) signal with EQ and filter effects. TrackExportWorker - - + + Export process was canceled - + Error removing file %1: %2. Stopping. - + Error exporting track %1 to %2: %3. Stopping. - + Error exporting tracks @@ -14007,7 +14022,7 @@ This can not be undone! - + Save snapshot @@ -14511,20 +14526,20 @@ This can not be undone! - + Ready to play, analyzing... Text on waveform overview when file is playable but no waveform is visible - - + + Loading track... Text on waveform overview when file is cached from source - + Finalizing... Text on waveform overview during finalizing of waveform analysis @@ -14784,238 +14799,238 @@ This can not be undone! - + Analyze - - + + Delete Track Files - + Add to Auto DJ Queue (bottom) - + Add to Auto DJ Queue (top) - + Add to Auto DJ Queue (replace) - + Preview Deck - + Remove - + Remove from Playlist - + Remove from Crate - + Hide from Library - + Unhide from Library - + Purge from Library - + Move Track File(s) to Trash - + Delete Files from Disk - + Properties - + Open in File Browser - + Select in Library - + Import From File Tags - + Import From MusicBrainz - + Export To File Tags - + BPM and Beatgrid - + Play Count - + Rating - + Cue Point - + Hotcues - + Intro - + Outro - + Key - + ReplayGain - + Waveform - + Comment - + All - + Lock BPM - + Unlock BPM - + Double BPM - + Halve BPM - + 2/3 BPM - + 3/4 BPM - + 4/3 BPM - + 3/2 BPM - + Reset BPM - + Reanalyze - + Reanalyze (constant BPM) - + Reanalyze (variable BPM) - + Update ReplayGain from Deck Gain - + Deck %1 - + Importing metadata of %n track(s) from file tags @@ -15023,7 +15038,7 @@ This can not be undone! - + Marking metadata of %n track(s) to be exported into file tags @@ -15031,50 +15046,50 @@ This can not be undone! - - + + Create New Playlist - + Enter name for new playlist: - + New Playlist - - - + + + Playlist Creation Failed - + A playlist by that name already exists. - + A playlist cannot have a blank name. - + An unknown error occurred while creating playlist: - + Add to New Crate - + Scaling BPM of %n track(s) @@ -15082,7 +15097,7 @@ This can not be undone! - + Locking BPM of %n track(s) @@ -15090,7 +15105,7 @@ This can not be undone! - + Unlocking BPM of %n track(s) @@ -15098,7 +15113,7 @@ This can not be undone! - + Setting color of %n track(s) @@ -15106,7 +15121,7 @@ This can not be undone! - + Resetting play count of %n track(s) @@ -15114,7 +15129,7 @@ This can not be undone! - + Resetting beats of %n track(s) @@ -15122,7 +15137,7 @@ This can not be undone! - + Clearing rating of %n track(s) @@ -15130,7 +15145,7 @@ This can not be undone! - + Clearing comment of %n track(s) @@ -15138,7 +15153,7 @@ This can not be undone! - + Removing main cue from %n track(s) @@ -15146,7 +15161,7 @@ This can not be undone! - + Removing outro cue from %n track(s) @@ -15154,7 +15169,7 @@ This can not be undone! - + Removing intro cue from %n track(s) @@ -15162,7 +15177,7 @@ This can not be undone! - + Removing loop cues from %n track(s) @@ -15170,7 +15185,7 @@ This can not be undone! - + Removing hot cues from %n track(s) @@ -15178,7 +15193,7 @@ This can not be undone! - + Resetting keys of %n track(s) @@ -15186,7 +15201,7 @@ This can not be undone! - + Resetting replay gain of %n track(s) @@ -15194,7 +15209,7 @@ This can not be undone! - + Resetting waveform of %n track(s) @@ -15202,7 +15217,7 @@ This can not be undone! - + Resetting all performance metadata of %n track(s) @@ -15210,133 +15225,133 @@ This can not be undone! - + Permanently delete these files from disk? - - + + This can not be undone! - + Stop the deck and move this track file to the trash bin? - + Stop the deck and permanently delete this track file from disk? - + Cancel - + Delete Files - + Okay - + Move Track File(s) to Trash? - + Track Files Deleted - + Track Files Moved To Trash - + %1 track files were moved to trash and purged from the Mixxx database. - + %1 track files were deleted from disk and purged from the Mixxx database. - + Track File Deleted - + Track file was deleted from disk and purged from the Mixxx database. - + The following %1 file(s) could not be deleted from disk - + This track file could not be deleted from disk - + Remaining Track File(s) - + Close - + Loops - + Removing %n track file(s) from disk... - + Note: if you are in the Computer or Recording view you need to click the current view again to see changes. - + Track File Moved To Trash - + Track file was moved to trash and purged from the Mixxx database. - + The following %1 file(s) could not be moved to trash - + This track file could not be moved to trash - + Setting cover art of %n track(s) @@ -15344,7 +15359,7 @@ This can not be undone! - + Reloading cover art of %n track(s) @@ -15355,37 +15370,37 @@ This can not be undone! WTrackTableView - + Confirm track hide - + Are you sure you want to hide the selected tracks? - + Are you sure you want to remove the selected tracks from AutoDJ queue? - + Are you sure you want to remove the selected tracks from this crate? - + Are you sure you want to remove the selected tracks from this playlist? - + Don't ask again during this session - + Confirm track removal @@ -15583,6 +15598,16 @@ Click OK to exit. + + mixxx::EnginePrimeExportJob + + + Failed to export track %1 - %2: +%3 + %1 is the artist %2 is the title and %3 is the original error message + + + mixxx::LibraryExporter @@ -15596,17 +15621,12 @@ Click OK to exit. - + Export Failed - - Export failed: %1 - - - - + Exporting to Engine Prime...