Skip to content

Latest commit

 

History

History
96 lines (75 loc) · 2.54 KB

README.md

File metadata and controls

96 lines (75 loc) · 2.54 KB
Raw

APGateway

Consists of

Setup

Write Raspberry Pi OS to an SD card

  • Download Raspberry Pi Imager and run it
  • Select OS → Raspberry Pi OS (other) → Raspberry Pi OS Lite
  • Click CTRL + SHIFT + X to enter advanced options
  • Check the button next to enable SSH
  • Set an SSH password
  • Enter Wifi credentials (best is a smartphone hotspot) and set the WiFi-country
  • Click Save
  • Select your SD card
  • Click Write

Access the Raspberry Pi

  • Insert the SD card into the Raspberry Pi
  • Plug in the power supply
  • If you are using a smartphone hotspot, you will see a connected device and its ip
  • Open a cmd terminal and type ssh pi@<raspberrypi_hostname>.local , e.g.
ssh [email protected]
  • enter your password
  • If you have chosen a weak password, change the password with:
passwd

Install the APGateway applications

curl https://raw.githubusercontent.com/WullT/APGateway/main/scripts/clone_install_add_services.sh | bash

Change login credentials for configserver

sudo nano /etc/systemd/system/configserver.service

In line 10, change username (default admin) and password (default CHANGE_ME)

To apply changes, run

sudo systemctl restart configserver.service

Mount a USB storage device

  • format the USB stick / Harddisk to ntfs
  • give it a name
  • on the Raspberry Pi, create a new directory, e.g.
mkdir /mnt/usb
  • edit /etc/fstab
sudo nano /etc/fstab
  • append this line to the file, change LABEL=data to the name of your storage device.
LABEL=data /mnt/usb ntfs defaults,auto,users,rw,nofail,umask=000,x-systemd.device-timeout=30 0 0
  • reboot the Raspberry Pi

Static networks

Edit /etc/network/interfaces

Example with an additional interface (USB-ethernet dongle → eth1):

# interfaces(5) file used by ifup(8) and ifdown(8)
# Include files from /etc/network/interfaces.d:
source /etc/network/interfaces.d/*

auto lo eth0 eth1 wlan0

allow-hotplug eth0
  iface eth0 inet dhcp

allow-hotplug eth1
 iface eth1 inet static
   address 192.168.50.1/24

allow-hotplug wlan0
 iface wlan0 inet dhcp
 wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf