Duo-V1.0.3

Upload new image and sdk:

• Enable ssh
• Enable RNDIS
• Blink LED
• Root password: milkv

Login via RNDIS using ssh:

ssh [email protected]

If you want to disable LED blinking:

mv /mnt/system/blink.sh /mnt/system/blink.sh_backup && sync

then reboot the board

Use the IO-Board

Note that when using the IO-Board, the USB network (RNDIS) is not available, Please use the Ethernet interface on the IO-Board

Enable the 4 USB ports on the IO-Board:

rm /mnt/system/usb.sh
ln -s /mnt/system/usb-host.sh /mnt/system/usb.sh
sync

then reboot the board

Restore the USB network (RNDIS) when the IO-Board is not used

rm /mnt/system/usb.sh
ln -s /mnt/system/usb-rndis.sh /mnt/system/usb.sh
sync

then reboot the board

20230807

Upload new image and sdk:

• Enable ssh
• Enable RNDIS
• Blink LED
• Root password: milkv

Login via RNDIS using ssh:

ssh [email protected]

If you want to disable LED blinking:

mv /mnt/system/blink.sh /mnt/system/blink.sh_backup && sync

then reboot the board

Use the IO-Board

Note that when using the IO-Board, the USB network (RNDIS) is not available, Please use the Ethernet interface on the IO-Board

Enable the 4 USB ports on the IO-Board:

rm /mnt/system/usb.sh
ln -s /mnt/system/usb-host.sh /mnt/system/usb.sh
sync

then reboot the board

Restore the USB network (RNDIS) when the IO-Board is not used

rm /mnt/system/usb.sh
ln -s /mnt/system/usb-rndis.sh /mnt/system/usb.sh
sync

then reboot the board

20230616

Upload new image and sdk:

• Enable ssh
• Enable RNDIS
• Blink LED
• Root password: milkv

Login via RNDIS using ssh:
ssh [email protected]

If you want to disable LED blinking:
mv /mnt/system/blink.sh /mnt/system/blink.sh_backup && sync
then reboot the board