dma.8

.\"
.\" Copyright (c) 2008
.\"	The DragonFly Project.  All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\"
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in
.\"    the documentation and/or other materials provided with the
.\"    distribution.
.\" 3. Neither the name of The DragonFly Project nor the names of its
.\"    contributors may be used to endorse or promote products derived
.\"    from this software without specific, prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
.\" LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
.\" FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
.\" COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
.\" INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
.\" BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
.\" LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
.\" AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
.\" OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
.\" OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.Dd October 03, 2012
.Dt DMA 8
.Os
.Sh NAME
.Nm dma
.Nd DragonFly Mail Agent
.Sh SYNOPSIS
.Nm
.Op Fl DiOt
.Op Fl A Ns Ar mode
.Op Fl b Ns Ar mode
.Op Fl f Ar sender
.Op Fl L Ar tag
.Op Fl o Ns Ar option
.Op Fl r Ar sender
.Op Fl q Ns Op Ar arg
.Op Ar recipient ...
.Sh DESCRIPTION
.Nm
is a small Mail Transport Agent (MTA), designed for home and office use.
It accepts mails from locally installed Mail User Agents (MUA) and
delivers the mails either locally or to a remote destination.
Remote delivery includes several features like TLS/SSL support and SMTP
authentication.
.Pp
.Nm
is not intended as a replacement for real, big MTAs like
.Xr sendmail 8
or
.Xr postfix 1 .
Consequently,
.Nm
does not listen on port 25 for incoming connections.
.Pp
The options are as follows:
.Bl -tag -width indent
.It Fl A Ns Ar mode
.Fl \&Ac
acts as a compatibility option for sendmail.
.It Fl b Ns Ar mode
.Bl -tag -width indent
.It Fl bp
List all mails currently stored in the mail queue.
.It Fl bq
Queue the mail, but don't attempt to deliver it.
See also the
.Sq DEFER
config file setting below.
.El
.Pp
All other
.Ar mode Ns
s are are ignored.
.It Fl D
Don't run in the background.
Useful for debugging.
.It Fl f Ar sender
Set sender address (envelope-from) to
.Ar sender .
This overrides the value of the environment variable
.Ev EMAIL .
.It Fl i
Ignore dots alone on lines by themselves in incoming messages.
This should be set if you are reading data from a file.
.It Fl L Ar tag
Set the identifier used in syslog messages to the supplied
.Ar tag .
This is a compatibility option for sendmail.
.It Fl O
This is a compatibility option for sendmail.
.It Fl o Ns Ar option
Specifying
.Fl oi
is synonymous to
.Fl i .
All other options are ignored.
.It Fl q Ns Op Ar arg
Process saved messages in the queue.
The argument is optional and ignored.
.It Fl r Ar sender
Same as
.Fl f .
.It Fl t
Obtain recipient addresses from the message header.
.Nm
will parse the
.Li To: ,
.Li Cc: ,
and
.Li Bcc:
headers.
The
.Li Bcc:
header will be removed independent of whether
.Fl t
is specified or not.
.El
.Sh CONFIGURATION
.Nm
can be configured with two config files:
.Pp
.Bl -bullet -compact
.It
auth.conf
.It
dma.conf
.El
.Pp
These two files are stored per default in
.Pa /etc/dma .
.Sh FILE FORMAT
Every file contains parameters of the form
.Sq name value .
Lines containing boolean values are set to
.Sq NO
if the line is commented and to
.Sq YES
if the line is uncommented.
Empty lines or lines beginning with a
.Sq #
are ignored.
Parameter names and their values are case sensitive.
.Sh PARAMETERS
.Ss auth.conf
SMTP authentication can be configured in
.Pa auth.conf .
Each line has the format
.Dq Li user|smarthost:password .
.Ss dma.conf
Most of the behaviour of
.Nm
can be configured in
.Pa dma.conf .
.Bl -tag -width 4n
.It Ic SMARTHOST Xo
(string, default=empty)
.Xc
If you want to send outgoing mails via a smarthost, set this variable to
your smarthosts address.
.It Ic PORT Xo
(numeric, default=25)
.Xc
Use this port to deliver remote emails.
Only useful together with the
.Sq SMARTHOST
option, because
.Nm
will deliver all mails to this port, regardless of whether a smarthost is set
or not.
.It Ic ALIASES Xo
(string, default=/etc/aliases)
.Xc
Path to the local aliases file.
Just stick with the default.
The aliases file is of the format
.Dl nam: dest1 dest2 ...
In this case, mails to
.Li nam
will instead be delivered to
.Li dest1
and
.Li dest2 ,
which in turn could be entries in
.Pa /etc/aliases .
The special name
.Ql *
can be used to create a catch-all alias, which gets used if no other
matching alias is found.
Use the catch-all alias only if you don't want any local mail to be
delivered.
.It Ic SPOOLDIR Xo
(string, default=/var/spool/dma)
.Xc
Path to
.Nm Ap s
spool directory.
Just stick with the default.
.It Ic AUTHPATH Xo
(string, default=not set)
.Xc
Path to the
.Sq auth.conf
file.
.It Ic VERBOSE Xo
(boolean, default=commented)
.Xc
Uncomment to turn on verbose development debug output, disabled by default
for security reasons. Use this option with extreme caution, always leave this
option disabled unless you are aware of what you are doing.
When in debug mode
.Nm
is going to log any network communication, including possibly sensitive
data and authentication credentials, to the system logger.
.It Ic SECURETRANSFER Xo
(boolean, default=commented)
.Xc
Uncomment if you want TLS/SSL secured transfer.
.It Ic STARTTLS Xo
(boolean, default=commented)
.Xc
Uncomment if you want to use STARTTLS.
Only useful together with
.Sq SECURETRANSFER .
.It Ic NOHELO Xo
(boolean, default=commented)
.Xc
Uncomment this option to disable HELO fallback when extended
SMTP features are not supported by the remote host. By default
.Nm
falls back to HELO if possible, unless authentication or
secure connection are required.
.It Ic OPPORTUNISTIC_TLS Xo
(boolean, default=commented)
.Xc
Uncomment if you want to allow the STARTTLS negotiation to fail.
Most useful when
.Nm
is used without a smarthost, delivering remote messages directly to
the outside mail exchangers; in opportunistic TLS mode, the connection will
be encrypted if the remote server supports STARTTLS, but an unencrypted
delivery will still be made if the negotiation fails.
Only useful together with
.Sq SECURETRANSFER
and
.Sq STARTTLS .
.It Ic CERTFILE Xo
(string, default=empty)
.Xc
Path to your SSL certificate file.
.It Ic SECURE Xo
(boolean, default=commented)
.Xc
Uncomment this entry and change it to
.Sq INSECURE
to use plain text SMTP login over an insecure connection.
You have to rename this variable manually to prevent that you send your
password accidentally over an insecure connection.
.It Ic DEFER Xo
(boolean, default=commented)
.Xc
Uncomment if you want that
.Nm
defers your mail.
You have to flush your mail queue manually with the
.Fl q
option.
This option is handy if you are behind a dialup line.
.It Ic FULLBOUNCE Xo
(boolean, default=commented)
.Xc
Uncomment if you want the bounce message to include the complete original
message, not just the headers.
.It Ic MAILNAME Xo
(string, default=empty)
.Xc
The internet hostname
.Nm
uses to identify the host.
If not set or empty, the result of
.Xr gethostname 3
is used.
If
.Sq MAILNAME
is an absolute path to a file, the first line of this file will be used
as the hostname.
.It Ic MASQUERADE Xo
(string, default=empty)
.Xc
Masquerade the envelope-from addresses with this address/hostname.
Use this setting if mails are not accepted by destination mail servers
because your sender domain is invalid.
This setting is overridden by the
.Fl f
flag and the
.Ev EMAIL
environment variable.
.Pp
If
.Sq MASQUERADE
does not contain a
.Li @
sign, the string is interpreted as a host name.
For example, setting
.Sq MASQUERADE
to
.Ql john@
on host
.Ql hamlet
will send all mails as
.Ql john@hamlet ;
setting it to
.Ql percolator
will send all mails as
.Ql Sm off Va username @percolator .
.Sm on
.El
.Ss Environment variables
The behavior of
.Nm
can be influenced by some environment variables.
.Bl -tag -width 4n
.It Ev EMAIL Xo
.Xc
Used to set the sender address (envelope-from).
Use a plain address, in the form of
.Li user@example.com .
This value will be overridden when the
.Fl f
flag is used.
.El
.Sh SEE ALSO
.Xr mailaddr 7 ,
.Xr mailwrapper 8 ,
.Xr sendmail 8
.Rs
.%A "J. B. Postel"
.%T "Simple Mail Transfer Protocol"
.%O RFC 821
.Re
.Rs
.%A "J. Myers"
.%T "SMTP Service Extension for Authentication"
.%O RFC 2554
.Re
.Rs
.%A "P. Hoffman"
.%T "SMTP Service Extension for Secure SMTP over TLS"
.%O RFC 2487
.Re
.Sh HISTORY
The
.Nm
utility first appeared in
.Dx 1.11 .
.Sh AUTHORS
.Nm
was written by
.An Matthias Schmidt Aq matthias@dragonflybsd.org
and
.An Simon Schubert Aq corecode@dragonflybsd.org .