diff --git a/src/configuration.h b/src/configuration.h
index 9ff8ddbbd6..9ffba16848 100644
--- a/src/configuration.h
+++ b/src/configuration.h
@@ -83,8 +83,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // Total system gain in dBm to subtract from Tx power to remain within regulatory ERP limit for non-licensed operators
 // This value should be set in variant.h and is PA gain + antenna gain (if system ships with an antenna)
-#ifndef REGULATORY_GAIN
-#define REGULATORY_GAIN 0
+#ifndef REGULATORY_GAIN_LORA
+#define REGULATORY_GAIN_LORA 0
 #endif
 
 // -----------------------------------------------------------------------------
diff --git a/src/mesh/RadioInterface.cpp b/src/mesh/RadioInterface.cpp
index 8e77beee4e..ae05ed004e 100644
--- a/src/mesh/RadioInterface.cpp
+++ b/src/mesh/RadioInterface.cpp
@@ -478,8 +478,8 @@ void RadioInterface::applyModemConfig()
 
     power = loraConfig.tx_power;
 
-    if ((power == 0) || ((power + REGULATORY_GAIN > myRegion->powerLimit) && !devicestate.owner.is_licensed))
-        power = myRegion->powerLimit - REGULATORY_GAIN;
+    if ((power == 0) || ((power + REGULATORY_GAIN_LORA > myRegion->powerLimit) && !devicestate.owner.is_licensed))
+        power = myRegion->powerLimit - REGULATORY_GAIN_LORA;
 
     if (power == 0)
         power = 17; // Default to this power level if we don't have a valid regional power limit (powerLimit of myRegion defaults
diff --git a/variants/xiao_ble/variant.h b/variants/xiao_ble/variant.h
index 4ca38f928a..a86ddfde26 100644
--- a/variants/xiao_ble/variant.h
+++ b/variants/xiao_ble/variant.h
@@ -144,12 +144,12 @@ static const uint8_t SCK = PIN_SPI_SCK;
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
 #ifdef EBYTE_E22_900M30S
 // 10dB PA gain and 30dB rated output; based on PA output table from Ebyte Robin <sales06@ebyte.com>
-#define REGULATORY_GAIN 10
+#define REGULATORY_GAIN_LORA 10
 #define SX126X_MAX_POWER 20
 #endif
 #ifdef EBYTE_E22_900M33S
 // 25dB PA gain and 33dB rated output; based on TX Power Curve from E22-900M33S_UserManual_EN_v1.0.pdf
-#define REGULATORY_GAIN 25
+#define REGULATORY_GAIN_LORA 25
 #define SX126X_MAX_POWER 8
 #endif
 #endif