From 39b5fb041e2423ed5b4d4d67b51be2feeb2a7e4b Mon Sep 17 00:00:00 2001 From: Ben Meadors Date: Sat, 7 Dec 2024 05:29:13 -0600 Subject: [PATCH] Revert "Add heltec capsule back" This reverts commit fc16d9342116235fa86cf6ac163b17125bb4b50e. --- lib/device-ui | 1 - .../heltec_capsule_sensor_v3/platformio.ini | 10 ---- variants/heltec_capsule_sensor_v3/variant.h | 53 ------------------- 3 files changed, 64 deletions(-) delete mode 160000 lib/device-ui delete mode 100644 variants/heltec_capsule_sensor_v3/platformio.ini delete mode 100644 variants/heltec_capsule_sensor_v3/variant.h diff --git a/lib/device-ui b/lib/device-ui deleted file mode 160000 index 6b760f5373..0000000000 --- a/lib/device-ui +++ /dev/null @@ -1 +0,0 @@ -Subproject commit 6b760f5373b91de1d8234922a446f7232d5247d0 diff --git a/variants/heltec_capsule_sensor_v3/platformio.ini b/variants/heltec_capsule_sensor_v3/platformio.ini deleted file mode 100644 index b5ffb65c22..0000000000 --- a/variants/heltec_capsule_sensor_v3/platformio.ini +++ /dev/null @@ -1,10 +0,0 @@ -[env:heltec_capsule_sensor_v3] -extends = esp32s3_base -board = heltec_wifi_lora_32_V3 -board_check = true - -build_flags = - ${esp32s3_base.build_flags} -I variants/heltec_capsule_sensor_v3 - -D HELTEC_CAPSULE_SENSOR_V3 - -D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely. - ;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output \ No newline at end of file diff --git a/variants/heltec_capsule_sensor_v3/variant.h b/variants/heltec_capsule_sensor_v3/variant.h deleted file mode 100644 index 415de0559d..0000000000 --- a/variants/heltec_capsule_sensor_v3/variant.h +++ /dev/null @@ -1,53 +0,0 @@ -#define LED_PIN 33 -#define LED_PIN2 34 -#define EXT_PWR_DETECT 35 - -#define BUTTON_PIN 18 - -#define BATTERY_PIN 7 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage -#define ADC_CHANNEL ADC1_GPIO7_CHANNEL -#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider -#define ADC_MULTIPLIER (4.9 * 1.045) -#define ADC_CTRL 36 // active HIGH, powers the voltage divider. Only on 1.1 -#define ADC_CTRL_ENABLED HIGH - -#undef GPS_RX_PIN -#undef GPS_TX_PIN -#define GPS_RX_PIN 5 -#define GPS_TX_PIN 4 -#define PIN_GPS_RESET 3 -#define GPS_RESET_MODE LOW -#define PIN_GPS_PPS 1 -#define PIN_GPS_EN 21 -#define GPS_EN_ACTIVE HIGH - -#define USE_SX1262 -#define LORA_DIO0 -1 // a No connect on the SX1262 module -#define LORA_RESET 12 -#define LORA_DIO1 14 // SX1262 IRQ -#define LORA_DIO2 13 // SX1262 BUSY -#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled - -#define LORA_SCK 9 -#define LORA_MISO 11 -#define LORA_MOSI 10 -#define LORA_CS 8 - -#define SX126X_CS LORA_CS -#define SX126X_DIO1 LORA_DIO1 -#define SX126X_BUSY LORA_DIO2 -#define SX126X_RESET LORA_RESET - -#define SX126X_DIO2_AS_RF_SWITCH -#define SX126X_DIO3_TCXO_VOLTAGE 1.8 - -#define I2C_SDA 1 -#define I2C_SCL 2 -#define HAS_SCREEN 0 -#define SENSOR_POWER_CTRL_PIN 21 -#define SENSOR_POWER_ON 1 - -#define PERIPHERAL_WARMUP_MS 100 -#define SENSOR_GPS_CONFLICT - -#define ESP32S3_WAKE_TYPE ESP_EXT1_WAKEUP_ANY_HIGH \ No newline at end of file