script_danfoss_ally_configure.yaml

---
alias: Danfoss Ally TRV configuration
sequence:
  - variables:
      ieee: "{{ (device_attr(device, 'identifiers')|list)[0][1] }}"
      default_tries: 3
  - alias: Configure reporting of local_temperature in Thermostat cluster
    service: zha_toolkit.conf_report
    data:
      ieee: "{{ ieee }}"
      cluster: 513
      attribute: 0
      tries: "{{ default_tries }}"
      event_done: zha_done
      reportable_change: 20
      max_interval: 300
      min_interval: 19
  - alias: Read back reporting configuration, for debugging
    service: zha_toolkit.conf_report_read
    data:
      ieee: "{{ ieee }}"
      cluster: 513
      attribute: 0
      tries: "{{ default_tries }}"
      event_done: zha_done
  - alias: Set lower limit for setpoint
    service: zha_toolkit.attr_write
    data:
      ieee: "{{ ieee }}"
      cluster: 513
      attribute: 21
      attr_val: "{{ ( set_min_temperature | float * 100) | int }}"
      tries: "{{ default_tries }}"
      csvout: danfoss_config.csv
  - alias: Set upper limit for setpoint
    service: zha_toolkit.attr_write
    data:
      ieee: "{{ ieee }}"
      cluster: 513
      attribute: 22
      attr_val: "{{ ( set_max_temperature | float * 100) | int }}"
      tries: "{{ default_tries }}"
      csvout: danfoss_config.csv
  - alias: Set Display rotation
    service: zha_toolkit.attr_write
    data:
      ieee: "{{ ieee }}"
      cluster: 516
      attribute: 16384
      attr_val: "{{ 0 if view_direction else 1 }}"
      manf: 4678
      event_done: zha_done
      tries: "{{ default_tries }}"
      csvout: danfoss_config.csv
  - alias: Set open window detection
    service: zha_toolkit.attr_write
    data:
      ieee: "{{ ieee }}"
      cluster: 513
      attribute: 16465
      attr_val: "{{ 1 if enable_open_window else 0 }}"
      manf: 4678
      event_done: zha_done
      tries: "{{ default_tries }}"
      csvout: danfoss_config.csv
  - alias: Check if window open reporting is configured, for debugging
    service: zha_toolkit.conf_report_read
    data:
      ieee: "{{ ieee }}"
      cluster: 513
      attribute: 16384
      manf: 4678
      tries: "{{ default_tries }}"
      event_done: zha_done
  - alias: Set TRV orientation (horizontal/vertical)
    service: zha_toolkit.attr_write
    data:
      ieee: "{{ ieee }}"
      cluster: 513
      attribute: 16404
      attr_val: "{{ 1 if orientation else 0 }}"
      manf: 4678
      event_done: zha_done
      tries: "{{ default_tries }}"
      csvout: danfoss_config.csv
  - alias: Set time
    service: zha_toolkit.misc_settime
    data:
      ieee: "{{ ieee }}"
      event_done: zha_done
      tries: "{{ default_tries }}"
      csvout: danfoss_config.csv
  - alias: Set time status to synchronised
    service: zha_toolkit.attr_write
    data:
      ieee: "{{ ieee }}"
      cluster: 10
      attribute: 1
      attr_val: 2
      tries: "{{ default_tries }}"
      csvout: danfoss_config.csv
  - alias: Set covered mode
    service: zha_toolkit.attr_write
    data:
      ieee: "{{ ieee }}"
      cluster: 513
      attribute: 16406
      attr_val: "{{ 1 if covered else 0 }}"
      manf: 4678
      tries: "{{ default_tries}}"
      csvout: danfoss_config.csv
  - alias: Check heat request reporting configuration
    service: zha_toolkit.conf_report_read
    data:
      ieee: "{{ ieee }}"
      cluster: 513
      attribute: 16433
      manf: 4678
      tries: "{{ default_tries }}"
      event_done: zha_done
  - alias: Read Heat Supply Request
    service: zha_toolkit.attr_read
    data:
      ieee: "{{ ieee }}"
      cluster: 513
      attribute: 16433
      manf: 4678
      tries: "{{ default_tries }}"
      csvout: danfoss_config.csv
description: >-
  A script that configures a Danfoss Ally TRV zigbee thermostat.  You can listen
  on the 'zha_done' event to see some of the configuration results.  Sets report
  configuration and enables window open function.
fields:
  device:
    name: Ally TRV Device
    description: A Danfoss Ally Thermostatic Regulation Valve (TRV) to configure
    required: true
    selector:
      device:
        manufacturer: Danfoss
        entity:
          domain: climate
          integration: zha
  set_min_temperature:
    name: Min user temperature
    description: The minimum temperature a user can set
    default: 8
    example: 8
    required: true
    selector:
      number:
        min: 8
        max: 22
        step: 0.5
        unit_of_measurement: °C
        mode: box
  set_max_temperature:
    name: Max user temperature
    description: The maximum temperature a user can set
    default: 22
    example: 22
    required: true
    selector:
      number:
        min: 8
        max: 22
        step: 0.5
        unit_of_measurement: °C
        mode: box
  enable_open_window:
    name: Enable open window detection
    description: When true, the valve detects open window and stops heating
    default: true
    example: true
    required: true
    selector:
      boolean:
  view_direction:
    name: Viewing direction/display rotation
    description: >-
      * When true, the text can be read when looking towards the valve (factory
      default), * When false, the text can be read when looking from the valve.
    default: true
    example: true
    required: true
    selector:
      boolean:
  orientation:
    name: TRV orientation
    description: >-
      - When false, mounted horizontally, - When true, mounted vertically. This
      selects the temperature gradient measured in the valve on radiator.
    default: false
    example: false
    required: true
    selector:
      boolean:
  covered:
    name: TRV covered setting
    description: >-
      - When true, the radiator is covered (you should use the automation to
      send temperature for external thermometer).
    default: false
    example: false
    required: true
    selector:
      boolean:
mode: single
icon: mdi:thermostat