octoprint-tft.service keeps restarting

[danielfmo]

Hello,

I can't get octoprint-tft to work on my raspberry pi1 with 256MB RAM, it keeps restarting.
My goal is to setup the octoprint-tft on my raspberry pi1 running hassbian (raspian running home assistant) while I have octoprint running in another device.
I have a raspberry pi 3.5" touch screen that works.

I already followed the README and issue #5 and #13 with the same result.

Here is my output:

journalctl -f -u octoprint-tft.service

May 02 18:38:04 hassbian systemd[1]: Started OctoPrint-TFT.
May 02 18:38:04 hassbian xinit[1154]: X.Org X Server 1.19.2
May 02 18:38:04 hassbian xinit[1154]: Release Date: 2017-03-02
May 02 18:38:04 hassbian xinit[1154]: X Protocol Version 11, Revision 0
May 02 18:38:04 hassbian xinit[1154]: Build Operating System: Linux 4.9.41-v7+ armv7l Raspbian
May 02 18:38:04 hassbian xinit[1154]: Current Operating System: Linux hassbian 4.14.98+ #1200 Tue Feb 12 20:11:02 GMT 2019 armv6l
May 02 18:38:04 hassbian xinit[1154]: Kernel command line: bcm2708_fb.fbwidth=480 bcm2708_fb.fbheight=320 bcm2708_fb.fbswap=1 vc_mem.mem_base=0xec00000 vc_mem.mem_size=0x10000000  dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait fbcon=map:10 fbcon=font:ProFont6x11 logo.nologo
May 02 18:38:04 hassbian xinit[1154]: Build Date: 18 October 2017  04:55:30PM
May 02 18:38:04 hassbian xinit[1154]: xorg-server 2:1.19.2-1+rpt1+deb9u2 (https://www.debian.org/support)
May 02 18:38:04 hassbian xinit[1154]: Current version of pixman: 0.34.0
May 02 18:38:04 hassbian xinit[1154]:         Before reporting problems, check http://wiki.x.org
May 02 18:38:04 hassbian xinit[1154]:         to make sure that you have the latest version.
May 02 18:38:04 hassbian xinit[1154]: Markers: (--) probed, (**) from config file, (==) default setting,
May 02 18:38:04 hassbian xinit[1154]:         (++) from command line, (!!) notice, (II) informational,
May 02 18:38:04 hassbian xinit[1154]:         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
May 02 18:38:04 hassbian xinit[1154]: (==) Log file: "/var/log/Xorg.1.log", Time: Thu May  2 18:38:04 2019
May 02 18:38:05 hassbian xinit[1154]: (==) Using config directory: "/etc/X11/xorg.conf.d"
May 02 18:38:05 hassbian xinit[1154]: (==) Using system config directory "/usr/share/X11/xorg.conf.d"
May 02 18:38:06 hassbian xinit[1154]: /usr/bin/xinit: connection to X server lost
May 02 18:38:06 hassbian xinit[1154]: [1B blob data]
May 02 18:38:06 hassbian xinit[1154]: waiting for X server to shut down (II) Server terminated successfully (0). Closing log file.
May 02 18:38:09 hassbian systemd[1]: octoprint-tft.service: Service hold-off time over, scheduling restart.
May 02 18:38:09 hassbian systemd[1]: Stopped OctoPrint-TFT.

/var/log/Xorg.1.log

[   634.601]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[   634.610] X Protocol Version 11, Revision 0
[   634.610] Build Operating System: Linux 4.9.41-v7+ armv7l Raspbian
[   634.610] Current Operating System: Linux hassbian 4.14.98+ #1200 Tue Feb 12 20:11:02 GMT 2019 armv6l
[   634.610] Kernel command line: bcm2708_fb.fbwidth=480 bcm2708_fb.fbheight=320 bcm2708_fb.fbswap=1 vc_mem.mem_base=0xec00000 vc_mem.mem_size=0x10000000  dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait fbcon=map:10 fbcon=font:ProFont6x11 logo.nologo
[   634.611] Build Date: 18 October 2017  04:55:30PM
[   634.612] xorg-server 2:1.19.2-1+rpt1+deb9u2 (https://www.debian.org/support)
[   634.612] Current version of pixman: 0.34.0
[   634.612]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[   634.612] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   634.614] (==) Log file: "/var/log/Xorg.1.log", Time: Thu May  2 18:37:30 2019
[   634.616] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   634.616] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   634.629] (==) No Layout section.  Using the first Screen section.
[   634.629] (==) No screen section available. Using defaults.
[   634.629] (**) |-->Screen "Default Screen Section" (0)
[   634.629] (**) |   |-->Monitor "<default monitor>"
[   634.631] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[   634.632] (==) Automatically adding devices
[   634.632] (==) Automatically enabling devices
[   634.632] (==) Automatically adding GPU devices
[   634.632] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   634.633] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   634.633]    Entry deleted from font path.
[   634.633] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[   634.633]    Entry deleted from font path.
[   634.633] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[   634.634]    Entry deleted from font path.
[   634.634] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[   634.634]    Entry deleted from font path.
[   634.634] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[   634.634]    Entry deleted from font path.
[   634.634] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[   634.634]    Entry deleted from font path.
[   634.635] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        built-ins
[   634.635] (==) ModulePath set to "/usr/lib/xorg/modules"
[   634.635] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[   634.635] (II) Loader magic: 0x1fbf40
[   634.635] (II) Module ABI versions:
[   634.635]    X.Org ANSI C Emulation: 0.4
[   634.635]    X.Org Video Driver: 23.0
[   634.636]    X.Org XInput driver : 24.1
[   634.636]    X.Org Server Extension : 10.0
[   634.659] (--) using VT number 2

[   634.659] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[   634.661] (II) no primary bus or device found
[   634.662] (II) LoadModule: "glx"
[   634.664] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   634.731] (II) Module glx: vendor="X.Org Foundation"
[   634.731]    compiled for 1.19.2, module version = 1.0.0
[   634.732]    ABI class: X.Org Server Extension, version 10.0
[   634.732] (==) Matched modesetting as autoconfigured driver 0
[   634.732] (==) Matched fbdev as autoconfigured driver 1
[   634.732] (==) Assigned the driver to the xf86ConfigLayout
[   634.733] (II) LoadModule: "modesetting"
[   634.734] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   634.736] (II) Module modesetting: vendor="X.Org Foundation"
[   634.736]    compiled for 1.19.2, module version = 1.19.2
[   634.736]    Module class: X.Org Video Driver
[   634.736]    ABI class: X.Org Video Driver, version 23.0
[   634.737] (II) LoadModule: "fbdev"
[   634.738] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   634.739] (II) Module fbdev: vendor="X.Org Foundation"
[   634.744]    compiled for 1.19.0, module version = 0.4.4
[   634.744]    Module class: X.Org Video Driver
[   634.745]    ABI class: X.Org Video Driver, version 23.0
[   634.745] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   634.745] (II) FBDEV: driver for framebuffer: fbdev
[   634.755] (WW) Falling back to old probe method for modesetting
[   634.755] (EE) open /dev/dri/card0: No such file or directory
[   634.756] (WW) Falling back to old probe method for fbdev
[   634.756] (II) Loading sub module "fbdevhw"
[   634.756] (II) LoadModule: "fbdevhw"
[   634.757] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   634.759] (II) Module fbdevhw: vendor="X.Org Foundation"
[   634.759]    compiled for 1.19.2, module version = 0.0.2
[   634.759]    ABI class: X.Org Video Driver, version 23.0
[   634.770] (II) FBDEV(0): using default device
[   634.770] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[   634.771] (II) FBDEV(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[   634.771] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[   634.771] (==) FBDEV(0): RGB weight 888
[   634.772] (==) FBDEV(0): Default visual is TrueColor
[   634.772] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[   634.772] (II) FBDEV(0): hardware: BCM2708 FB (video memory: 600kB)
[   634.772] (II) FBDEV(0): checking modes against framebuffer device...
[   634.773] (II) FBDEV(0): checking modes against monitor...
[   634.773] (--) FBDEV(0): Virtual size is 480x320 (pitch 480)
[   634.773] (**) FBDEV(0):  Built-in mode "current"
[   634.773] (==) FBDEV(0): DPI set to (96, 96)
[   634.774] (II) Loading sub module "fb"
[   634.774] (II) LoadModule: "fb"
[   634.775] (II) Loading /usr/lib/xorg/modules/libfb.so
[   634.777] (II) Module fb: vendor="X.Org Foundation"
[   634.777]    compiled for 1.19.2, module version = 1.0.0
[   634.777]    ABI class: X.Org ANSI C Emulation, version 0.4
[   634.778] (**) FBDEV(0): using shadow framebuffer
[   634.778] (II) Loading sub module "shadow"
[   634.778] (II) LoadModule: "shadow"
[   634.779] (II) Loading /usr/lib/xorg/modules/libshadow.so
[   634.784] (II) Module shadow: vendor="X.Org Foundation"
[   634.784]    compiled for 1.19.2, module version = 1.1.0
[   634.784]    ABI class: X.Org ANSI C Emulation, version 0.4
[   634.785] (II) UnloadModule: "modesetting"
[   634.785] (II) Unloading modesetting
[   634.785] (==) Depth 24 pixmap format is 32 bpp
[   634.788] (==) FBDEV(0): Backing store enabled
[   634.791] (==) FBDEV(0): DPMS enabled
[   634.792] (==) RandR enabled
[   634.877] (II) SELinux: Disabled on system
[   634.890] (II) AIGLX: Screen 0 is not DRI2 capable
[   634.890] (EE) AIGLX: reverting to software rendering
[   635.739] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[   635.747] (II) IGLX: Loaded and initialized swrast
[   635.747] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   636.336] (II) config/udev: Adding input device ADS7846 Touchscreen (/dev/input/event0)
[   636.337] (**) ADS7846 Touchscreen: Applying InputClass "evdev touchscreen catchall"
[   636.337] (**) ADS7846 Touchscreen: Applying InputClass "evdev touchscreen catchall"
[   636.337] (**) ADS7846 Touchscreen: Applying InputClass "calibration"
[   636.338] (**) ADS7846 Touchscreen: Applying InputClass "calibration"
[   636.338] (II) LoadModule: "evdev"
[   636.339] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   636.346] (II) Module evdev: vendor="X.Org Foundation"
[   636.346]    compiled for 1.19.0, module version = 2.10.5
[   636.346]    Module class: X.Org XInput Driver
[   636.346]    ABI class: X.Org XInput driver, version 24.1
[   636.347] (II) Using input driver 'evdev' for 'ADS7846 Touchscreen'
[   636.347] (**) ADS7846 Touchscreen: always reports core events
[   636.347] (**) evdev: ADS7846 Touchscreen: Device: "/dev/input/event0"
[   636.349] (--) evdev: ADS7846 Touchscreen: Vendor 0 Product 0
[   636.349] (--) evdev: ADS7846 Touchscreen: Found absolute axes
[   636.349] (--) evdev: ADS7846 Touchscreen: Found x and y absolute axes
[   636.349] (--) evdev: ADS7846 Touchscreen: Found absolute touchscreen
[   636.350] (**) Option "SwapAxes" "1"
[   636.350] (II) evdev: ADS7846 Touchscreen: Configuring as touchscreen
[   636.350] (**) Option "EmulateThirdButton" "1"
[   636.351] (**) Option "EmulateThirdButtonTimeout" "1000"
[   636.351] (**) Option "EmulateThirdButtonMoveThreshold" "300"
[   636.351] (**) evdev: ADS7846 Touchscreen: YAxisMapping: buttons 4 and 5
[   636.352] (**) evdev: ADS7846 Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   636.352] (**) Option "config_info" "udev:/sys/devices/platform/soc/20204000.spi/spi_master/spi0/spi0.1/input/input0/event0"
[   636.352] (II) XINPUT: Adding extended input device "ADS7846 Touchscreen" (type: TOUCHSCREEN, id 6)
[   636.353] (II) evdev: ADS7846 Touchscreen: initialized for absolute axes.
[   636.355] (**) ADS7846 Touchscreen: (accel) keeping acceleration scheme 1
[   636.356] (**) ADS7846 Touchscreen: (accel) acceleration profile 0
[   636.356] (**) ADS7846 Touchscreen: (accel) acceleration factor: 2.000
[   636.356] (**) ADS7846 Touchscreen: (accel) acceleration threshold: 4
[   636.364] (II) config/udev: Adding input device ADS7846 Touchscreen (/dev/input/mouse0)
[   636.364] (**) ADS7846 Touchscreen: Applying InputClass "calibration"
[   636.365] (**) ADS7846 Touchscreen: Applying InputClass "calibration"
[   636.365] (II) No input driver specified, ignoring this device.
[   636.365] (II) This device may have been added with another device file.
[   636.685] (II) evdev: ADS7846 Touchscreen: Close
[   636.686] (II) UnloadModule: "evdev"
[   636.713] (II) Server terminated successfully (0). Closing log file.

/etc/octoprint-tft-environment

# OctoPrint HTTP address, default http://localhost
OCTOPRINT_HOST=http://192.168.0.201

# OctoPrint-TFT expects an API key to be supplied. This API key can be either
# the globally configured one or a user specific one if “Access Control”.
# http://docs.octoprint.org/en/master/api/general.html
OCTOPRINT_APIKEY=9C8EA2A46E23464D97704F0E1B9C576A

# Location of the OctoPrint's config.yaml file, if OCTOPRINT_APIKEY is empty
# a the gobal API will be read from the config file. If empty the file will
# be search at the `pi` home folder or the current user.
OCTOPRINT_CONFIG_FILE=

# Location of the application theme.
OCTOPRINT_TFT_STYLE_PATH=/opt/octoprint-tft/styles/default/

# Resolution of the application, should be configured to the resolution of your
# screen, for example 800x480. By default 480x320.
OCTOPRINT_TFT_RESOLUTION=

/lib/systemd/system/octoprint-tft.service

[Unit]
Description=OctoPrint-TFT
[email protected]
After=systemd-user-sessions.service [email protected] plymouth-quit.service

[Service]
EnvironmentFile=/etc/octoprint-tft-environment
ExecStart=/usr/bin/xinit /usr/bin/OctoPrint-TFT -- :1 -nolisten tcp -nocursor
StandardOutput=journal
Restart=always
RestartSec=1s
TimeoutStopSec=5s
IgnoreSIGPIPE=no

[Install]
WantedBy=graphical.target
Alias=display-manager.service

Thank you