Skip to content

Latest commit

 

History

History
18 lines (13 loc) · 1.29 KB

README.md

File metadata and controls

18 lines (13 loc) · 1.29 KB
Raw

ESP HomeKit Vagrant Build Environment

In order to run maximkulkin/esp-homekit-demo you need pfalcon/esp-open-sdk which requires a case-sensitive build environment on OS X and is just generally a pain.

Using

  1. Edit the Vagrantfile and update the USB device identification section for your ESP. VBoxManage list usbhost on the host machine will help you identify the device. (N.B. feel free to edit CPU/memory allocations while you're here, but the initial provisioning will fail if set to the default 512MB - I did not test the actual minimum this will build at)
  2. vagrant up and wait
  3. vagrant ssh to connect to the build environment
  4. To test esp-homekit-demo, cd esp-homekit-demo
  5. cp wifi.h.sample wifi.h and edit wifi.h
  6. Execute make -C examples/led test and if all goes well it should compile and write to your device
  7. This directory should be visible and usable from /vagrant/ with all the tools you expect for compiling and burning ESP firmware

Notes

  • The Vagrantfile assumes that your ESP is using the cp210x serial UART driver
  • The ESPPORT variable is set to point to /dev/TTYUSB0 which may need to be adjusted depending on where your USB serial device is detected within the VM