Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Test Gatelessgate #8

Open
maztheman opened this issue Dec 20, 2016 · 48 comments
Open

Test Gatelessgate #8

maztheman opened this issue Dec 20, 2016 · 48 comments

Comments

@maztheman
Copy link
Owner

new build, new tests needed...

https://github.com/maztheman/nheqminer/releases/tag/v0.4m
@maztheman maztheman mentioned this issue Dec 20, 2016
Closed
@dtawom
Copy link

dtawom commented Dec 20, 2016

Getting @ 80 Sol/s on my OC'd 1070 and 66 Sol/s on my 1060. I'll submit R9 fury results later.

@ceozero
Copy link

ceozero commented Dec 20, 2016

AMD 390 (15.12) drive error, cannot run.

[03:59:18][0x00000e70] Using SSE2: YES
[03:59:18][0x00000e70] Using AVX: NO
[03:59:18][0x00000e70] Using AVX2: NO
[03:59:18][0x000003ec] stratum | Starting miner
[03:59:18][0x00000c0c] miner#1 | Starting thread #1 (OCL_SILENTARMY) GPU_ID( )
[03:59:18][0x000003ec] stratum | Connecting to stratum server
[03:59:18][0x000003ec] stratum | Connected!
[03:59:18][0x000003ec] stratum | Subscribed to stratum server
[03:59:18][0x000003ec] miner | Extranonce is 0000000000000000000000a9
[03:59:18][0x000003ec] stratum | Authorized worker 000
[03:59:18][0x000003ec] stratum | �[35mTarget set to 0007ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff�[0m
[03:59:18][0x000003ec] stratum | �[36mReceived new job #854259167799041�[0m
[03:59:18][0x00000ef0] miner#0 | Starting thread #0 (OCL_SILENTARMY) GPU_ID( Hawaii )
Hash tables will use 402.7 MB
Hash tables will use 402.7 MB
[03:59:28][0x00000e70] �[33mSpeed [300 sec]: 0 I/s, 0 Sols/s�[0m
[03:59:38][0x00000e70] �[33mSpeed [300 sec]: 0 I/s, 0 Sols/s�[0m
[03:59:48][0x00000e70] �[33mSpeed [300 sec]: 0 I/s, 0 Sols/s�[0m
[03:59:58][0x00000e70] �[33mSpeed [300 sec]: 0 I/s, 0 Sols/s�[0m
[04:00:08][0x00000e70] �[33mSpeed [300 sec]: 0 I/s, 0 Sols/s�[0m

@ceozero
Copy link

ceozero commented Dec 20, 2016

Driver stops responding and has been restored.

@maztheman
Copy link
Owner Author

Looks like i made a mistake with the build...rebuilding now

@maztheman
Copy link
Owner Author

ok new build is put up

to test simply go:

nheqminer.exe -b 200 -t 0 -od 0

@maztheman
Copy link
Owner Author

maztheman commented Dec 21, 2016 •
edited
Loading

https://github.com/maztheman/nheqminer/releases/tag/v0.5a

nvidia optimised for sm 5.0+ cards (1060+)

@maztheman
Copy link
Owner Author

ok, so now i have 2 builds for neweset gateless gate...its better performance from 150 sol/s to 170 sol/s on a R9290

@ceozero
Copy link

ceozero commented Dec 21, 2016

amd 390 0sol。。。

@ceozero
Copy link

ceozero commented Dec 21, 2016

Did anyone run AMD successfully?
Tell me the system and drive

@maztheman
Copy link
Owner Author

windows 10 x64 amd 16.12.1 seems to work

@ceozero
Copy link

ceozero commented Dec 21, 2016

I'm WIN7 X64 15.12

@Kahana82
Copy link

Sadly I see no difference from previous CUDA 4.0# builds with 5.0a on my GTX980.
Tried the usual command line and one without any parameters on the gpu to let the app do it's thing.
Gives about 100 sols in all cases, did I miss something ?

EWBF miner cranks out double of that atm on the same gpu ... except I would rather use one of yours to mine.

@ceozero
Copy link

ceozero commented Dec 21, 2016

WIN7 X64 16.12.2....... -od 0 1 2 -t 0 -b 200

Still can not run.. Flash back..

@ceozero
Copy link

ceozero commented Dec 21, 2016

I think this should be a procedural problem. Rather than system and drive problems.

@maztheman
Copy link
Owner Author

try with just 1 card, maybe something is happening with multi gpu...

@maztheman
Copy link
Owner Author

@Kahana82 try -od command instead of -cd. I havent ported the code to CUDA just yet...

@maztheman
Copy link
Owner Author

and in a couple days i will not have a NVIDIA card any longer so...itll be blind porting, like how I started out :)

@ceozero
Copy link

ceozero commented Dec 21, 2016

1 card is Still can not run.. Flash back..

@maztheman
Copy link
Owner Author

please paste the whole command line and output

@ceozero
Copy link

ceozero commented Dec 21, 2016

@maztheman
nheqminer -l zec.f2pool.com:3357 -u t1JjmGo5scqZpivNe1yQWKRi1Vi5Ko2oH8F.000 -p x -od 0 -t 0 -b 200 2>out.txt

[00:29:06][0x00000e54] Using SSE2: YES
[00:29:06][0x00000e54] Using AVX: NO
[00:29:06][0x00000e54] Using AVX2: NO
[00:29:06][0x00000e54] Benchmarking OPENCL worker (OCL_GATELESSGATE) GPU_ID( Hawaii )
Hash tables will use 939.0 MB
[00:29:07][0x00000e54] Benchmark starting... this may take several minutes, please wait...
[00:29:09][0x00000e54] Benchmark done!
[00:29:09][0x00000e54] Total time : 1947 ms
[00:29:09][0x00000e54] Total iterations: 200
[00:29:09][0x00000e54] Total solutions found: 0
[00:29:09][0x00000e54] Speed: 102.722 I/s
[00:29:09][0x00000e54] Speed: 0 Sols/s

@maztheman
Copy link
Owner Author

ok, try deleteing all the .bin files and run again...

@ceozero
Copy link

ceozero commented Dec 21, 2016

del bin .Still the same. Flash back..

[00:40:07][0x00000148] Using SSE2: YES
[00:40:07][0x00000148] Using AVX: NO
[00:40:07][0x00000148] Using AVX2: NO
[00:40:07][0x00000148] Benchmarking OPENCL worker (OCL_GATELESSGATE) GPU_ID( Hawaii )
Hash tables will use 939.0 MB
[00:40:10][0x00000148] Benchmark starting... this may take several minutes, please wait...
[00:40:12][0x00000148] Benchmark done!
[00:40:12][0x00000148] Total time : 2028 ms
[00:40:12][0x00000148] Total iterations: 200
[00:40:12][0x00000148] Total solutions found: 408
[00:40:12][0x00000148] Speed: 98.6193 I/s
[00:40:12][0x00000148] Speed: 201.183 Sols/s

@maztheman
Copy link
Owner Author

see where it says 200 sols/s

@maztheman
Copy link
Owner Author

now try multi gpu

@ceozero
Copy link

ceozero commented Dec 21, 2016

but it Automatically exit.
Cannot continue running

@ceozero
Copy link

ceozero commented Dec 21, 2016

What is the problem?

@maztheman
Copy link
Owner Author

the benchmark only runs for 200 iterations, remove the -b 200 to test the actual mining...but do you need a special build for deepwebcash ??

@ceozero
Copy link

ceozero commented Dec 21, 2016

I'm using ZCASH now.

@maztheman
Copy link
Owner Author

ok, then just use:

nheqminer -l zec.f2pool.com:3357 -u t1JjmGo5scqZpivNe1yQWKRi1Vi5Ko2oH8F.000 -p x -od 0 1 2 -t 0

@ceozero
Copy link

ceozero commented Dec 21, 2016

I don't think it's working.

[01:14:33][0x00000258] Using SSE2: YES
[01:14:33][0x00000258] Using AVX: NO
[01:14:33][0x00000258] Using AVX2: NO
[01:14:33][0x00000e7c] stratum | Starting miner
[01:14:33][0x00000e7c] stratum | Connecting to stratum server zec.f2pool.com:3357
[01:14:33][0x00000bbc] miner#0 | Starting thread #0 (OCL_GATELESSGATE) GPU_ID( Hawaii )
[01:14:33][0x00000e7c] stratum | Connected!
[01:14:33][0x00000e7c] stratum | Subscribed to stratum server
[01:14:33][0x00000e7c] miner | Extranonce is 00000000000000000000000000000000
[01:14:33][0x00000e7c] stratum | �[35mTarget set to 000fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff�[0m
[01:14:33][0x00000e7c] stratum | �[36mReceived new job #F351iuXTQE�[0m
[01:14:33][0x00000e7c] stratum | Authorized worker t1JjmGo5scqZpivNe1yQWKRi1Vi5Ko2oH8F.000
Hash tables will use 939.0 MB
[01:14:43][0x00000258] �[33mSpeed [300 sec]: 65.4019 I/s, 0 Sols/s�[0m
[01:14:46][0x00000e7c] stratum | �[36mIgnoring non-clean job #F351iuZUEI�[0m
[01:14:53][0x00000258] �[33mSpeed [300 sec]: 84.6696 I/s, 0 Sols/s�[0m
[01:15:03][0x00000258] �[33mSpeed [300 sec]: 91.2361 I/s, 0 Sols/s�[0m
[01:15:05][0x00000e7c] stratum | �[35mTarget set to 001fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff�[0m
[01:15:05][0x00000e7c] stratum | �[36mReceived new job #DiZe8bkS7a�[0m
[01:15:13][0x00000258] �[33mSpeed [300 sec]: 91.8949 I/s, 0.024985 Sols/s�[0m
[01:15:21][0x00000e7c] stratum | �[36mReceived new job #DiZe8bl4cQ�[0m
[01:15:23][0x00000258] �[33mSpeed [300 sec]: 92.3338 I/s, 0.01999 Sols/s�[0m
[01:15:33][0x00000258] �[33mSpeed [300 sec]: 94.3425 I/s, 0.0166594 Sols/s�[0m
[01:15:42][0x00000e7c] stratum | �[35mTarget set to 007fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff�[0m
[01:15:42][0x00000e7c] stratum | �[36mIgnoring non-clean job #B3YsxYqvPq�[0m
[01:15:43][0x00000258] �[33mSpeed [300 sec]: 95.8202 I/s, 0.0142802 Sols/s�[0m
[01:15:48][0x00000e7c] stratum | �[36mIgnoring non-clean job #B3YsxYr9Gw�[0m
[01:15:53][0x00000258] �[33mSpeed [300 sec]: 96.9423 I/s, 0.0124958 Sols/s�[0m
[01:16:03][0x00000258] �[33mSpeed [300 sec]: 97.7896 I/s, 0.0111074 Sols/s�[0m
[01:16:13][0x00000258] �[33mSpeed [300 sec]: 98.4355 I/s, 0.0099965 Sols/s�[0m
[01:16:23][0x00000258] �[33mSpeed [300 sec]: 98.9949 I/s, 0.00908793 Sols/s�[0m

@maztheman
Copy link
Owner Author

it takes a about 30 seconds for it to start up ( i dont know why...)

@maztheman
Copy link
Owner Author

im testing with that command line, and its working for me.... r9290

@ceozero
Copy link

ceozero commented Dec 21, 2016

I've been running for 10 minutes, or am I still 0 SOLS/S

@maztheman
Copy link
Owner Author

ok, that is odd....

are you using:

https://github.com/maztheman/nheqminer/releases/download/v0.5a/v0.5_AMD.7z
?

@ceozero
Copy link

ceozero commented Dec 21, 2016

YES V0.5_AMD

@Kahana82
Copy link

Tried with OCL instead of CUDA ( -od command) on GTX 980 :
v4.0L (OCL_Silentarmy) -> 36 sols/s
v5.0A (OCL_GatelessGate) -> 140 sols/s

Amazing !.. can't wait for the CUDA implementation :)

@Dashaiva
Copy link

@dtawom try using opencl on your 1070 and post your results. My 1080 got 300 sol/s in opencl.

@lucasan12
Copy link

lucasan12 commented Dec 22, 2016 •
edited
Loading

100 sol with gtx 980 ti. silentarmy.............. with other miner i'm getting 300 sols .. can you fix it?
ah edit im getting with gateless gate 150 sol

@dtawom
Copy link

dtawom commented Dec 22, 2016

Getting about 185 h/s on my R9 Fury's compared to the 330 H/s I get with the same card on claymore. I think I was only getting 165 or so before though so it is an improvement of about 20 h/s

@dtawom
Copy link

dtawom commented Dec 22, 2016

@Dashaiva
1070 with nheqminer.exe -l us1-zcash.flypool.org:3333 -u phoopstuffhere -p x -od 0 -t 0 -b 200 2>out.txt
[13:55:39][0x00000008] Using SSE2: YES
[13:55:39][0x00000008] Using AVX: YES
[13:55:39][0x00000008] Using AVX2: YES
[13:55:39][0x00000008] Benchmarking OPENCL worker (OCL_GATELESSGATE) GPU_ID( GeForce GTX 1070 )
Hash tables will use 805.7 MB
[13:55:41][0x00000008] Benchmark starting... this may take several minutes, please wait...
[13:55:43][0x00000008] Benchmark done!
[13:55:43][0x00000008] Total time : 2179 ms
[13:55:43][0x00000008] Total iterations: 200
[13:55:43][0x00000008] Total solutions found: 377
[13:55:43][0x00000008] Speed: 91.7852 I/s
[13:55:43][0x00000008] Speed: 173.015 Sols/s

1060 with nheqminer.exe -l us1-zcash.flypool.org:3333 -u phoopstuffhere -p x -od 1 -t 0 -b 200 2>out.txt
[13:57:10][0x00002d40] Using SSE2: YES
[13:57:10][0x00002d40] Using AVX: YES
[13:57:10][0x00002d40] Using AVX2: YES
[13:57:10][0x00002d40] Benchmarking OPENCL worker (OCL_GATELESSGATE) GPU_ID( GeForce GTX 1060 3GB )
Hash tables will use 805.7 MB
[13:57:10][0x00002d40] Benchmark starting... this may take several minutes, please wait...
[13:57:13][0x00002d40] Benchmark done!
[13:57:13][0x00002d40] Total time : 3098 ms
[13:57:13][0x00002d40] Total iterations: 200
[13:57:13][0x00002d40] Total solutions found: 378
[13:57:13][0x00002d40] Speed: 64.5578 I/s
[13:57:13][0x00002d40] Speed: 122.014 Sols/s

@maztheman
Copy link
Owner Author

i wrote another test program to test some nvidia optimizations:
https://github.com/maztheman/nheqminer/releases/tag/TEST1

if you could run it, there is a 128, 256, 512 thread version.

@lucasan12
Copy link

Tested. the first program found one sol at time . the second uses 50 % of power of the gpu and found 43 sol. it is stable at 43 sol. also the others the same
i have gtx 980 ti

@maztheman
Copy link
Owner Author

new build from scratch located here:
https://github.com/maztheman/nheqminer/releases/tag/BETA1

its not cuda but still runs great on nvidia cards and pretty much all gpus as long as its opencl 1.2 support. Optimised for older nvidia cards, and igpus.

@lucasan12
Copy link

Doesnt work well with multiple gpus .. it tries to run the same gpu two times and then crashes. However the hashrate is very low compared with other miners.

@maztheman
Copy link
Owner Author

can you post results for just the GTX 980 ti ?

@maztheman
Copy link
Owner Author

Multiple gpus works just fine with me. assuming nvidia is platform# 0, you would go:
igpu.exe -p 0,0,0 -d 0,1,2 -b200

@lucasan12
Copy link

ok , tested with 3 gtx 1080 and one 1070 does 900 sols instead of 1900, with one 1070 does only 270 sol instead of 410.

@maztheman
Copy link
Owner Author

maztheman commented Oct 17, 2017 via email

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
6 participants
@maztheman @ceozero @lucasan12 @Kahana82 @dtawom @Dashaiva