diff --git a/tests/examples/Beckers_et_al_2023_Tabulated_Database_Coaxial_sCO2_heat.txt b/tests/examples/Beckers_et_al_2023_Tabulated_Database_Coaxial_sCO2_heat.txt
index 10c23e46..40253828 100644
--- a/tests/examples/Beckers_et_al_2023_Tabulated_Database_Coaxial_sCO2_heat.txt
+++ b/tests/examples/Beckers_et_al_2023_Tabulated_Database_Coaxial_sCO2_heat.txt
@@ -1,10 +1,8 @@
-#GEOPHIRES v3.0 Input File
-#Last modified on 2024-01-29
-#Example Description: Example 1 from "Tabulated Database of Closed-Loop Geothermal Systems Performance for Cloud-Based Technical and Economic Modeling of Heat Production and Electricity Generation"
-#Koenraad Beckers Yaroslav Vasyliv Gabriela A. Bran-Anleu Mario Martinez Chad Augustine and Mark White
-#Presented at the 48th Stanford Geothermal Workshop Stanford California February 6-8 2023
-#This configuration is water filled U-loop with 1 lateral for direct-use heat
-#----------------------------------------------------------------------------------------
+# Example 1 from "Tabulated Database of Closed-Loop Geothermal Systems Performance for Cloud-Based Technical and
+#   Economic Modeling of Heat Production and Electricity Generation"
+# Koenraad Beckers Yaroslav Vasyliv Gabriela A. Bran-Anleu Mario Martinez Chad Augustine and Mark White
+# Presented at the 48th Stanford Geothermal Workshop Stanford California February 6-8 2023
+# This configuration is water filled U-loop with 1 lateral for direct-use heat.
 
 Is AGS, True
 Closed-loop Configuration, 1
@@ -30,8 +28,8 @@ Circulation Pump Efficiency, 0.8, -----[-]
 #same as default Capital Cost for Surface Plant for Direct-use System, 100.00,    ----$/kWth
 #same as default Dead-state Pressure, 1e5,     ---- bar
 
-*** Economic/Financial Parameters ***
-*************************************
+# *** Economic/Financial Parameters ***
+# *************************************
 Economic Model,4,			--- Should be 1 (FCR model) 2 (Standard LCOE/LCOH model) 3 (Bicycle model) 4 CLGS.
 Fraction of Investment in Bonds,0.65,	--- [-] Required if Bicycle model is selected. See manual for details.
 Inflated Bond Interest Rate,0.07,	--- [-] Required if Bicycle model is selected. See manual for details.
@@ -41,5 +39,5 @@ Combined Income Tax Rate,0.392,		--- [-] Required if Bicycle model is selected.
 Gross Revenue Tax Rate,0,		--- [-] Required if Bicycle model is selected. See manual for details.
 Reservoir Stimulation Capital Cost,0,				--- [M$/injection well] Reservoir stimulation capital cost per injection well
 
-*** Simulation Parameters ***
+# *** Simulation Parameters ***
 Print Output to Console,1,		--- [-] Should be 0 (don't print results to console) or 1 (print results to console)
diff --git a/tests/examples/Beckers_et_al_2023_Tabulated_Database_Coaxial_water_heat.txt b/tests/examples/Beckers_et_al_2023_Tabulated_Database_Coaxial_water_heat.txt
index 205b82ca..24962050 100644
--- a/tests/examples/Beckers_et_al_2023_Tabulated_Database_Coaxial_water_heat.txt
+++ b/tests/examples/Beckers_et_al_2023_Tabulated_Database_Coaxial_water_heat.txt
@@ -1,10 +1,9 @@
-#GEOPHIRES v3.0 Input File
-#Last modified on 2023-04-12
-#Example Description: Example 1 from "Tabulated Database of Closed-Loop Geothermal Systems Performance for Cloud-Based Technical and Economic Modeling of Heat Production and Electricity Generation"
-#Koenraad Beckers Yaroslav Vasyliv Gabriela A. Bran-Anleu Mario Martinez Chad Augustine and Mark White
-#Presented at the 48th Stanford Geothermal Workshop Stanford California February 6-8 2023
-#This configuration is water filled U-loop with 1 lateral for direct-use heat
-#----------------------------------------------------------------------------------------
+# Example 1 from "Tabulated Database of Closed-Loop Geothermal Systems Performance for Cloud-Based Technical and
+#    Economic Modeling of Heat Production and Electricity Generation"
+# Koenraad Beckers Yaroslav Vasyliv Gabriela A. Bran-Anleu Mario Martinez Chad Augustine and Mark White
+# Presented at the 48th Stanford Geothermal Workshop Stanford California February 6-8 2023
+# This configuration is water filled U-loop with 1 lateral for direct-use heat
+
 Is AGS, True
 Closed-loop Configuration, 2, ----Coaxial
 End-Use Option, 2,        -----direct heat
@@ -30,8 +29,8 @@ Circulation Pump Efficiency, 0.8, -----[-]
 #same as default Capital Cost for Surface Plant for Direct-use System, 100.00,    ----$/kWth
 #same as default Dead-state Pressure, 1e5,     ---- bar
 
-*** Economic/Financial Parameters ***
-*************************************
+# *** Economic/Financial Parameters ***
+# *************************************
 Economic Model,4,			--- Should be 1 (FCR model) 2 (Standard LCOE/LCOH model) 3 (Bicycle model) 4 CLGS.
 Fraction of Investment in Bonds,0.65,	--- [-] Required if Bicycle model is selected. See manual for details.
 Inflated Bond Interest Rate,0.07,	--- [-] Required if Bicycle model is selected. See manual for details.
@@ -41,5 +40,5 @@ Combined Income Tax Rate,0.392,		--- [-] Required if Bicycle model is selected.
 Gross Revenue Tax Rate,0,		--- [-] Required if Bicycle model is selected. See manual for details.
 Reservoir Stimulation Capital Cost,0,				--- [M$/injection well] Reservoir stimulation capital cost per injection well
 
-*** Simulation Parameters ***
+# *** Simulation Parameters ***
 Print Output to Console,1,		--- [-] Should be 0 (don't print results to console) or 1 (print results to console)
diff --git a/tests/examples/Beckers_et_al_2023_Tabulated_Database_Uloop_sCO2_elec.txt b/tests/examples/Beckers_et_al_2023_Tabulated_Database_Uloop_sCO2_elec.txt
index 8108236c..ee3bc36a 100644
--- a/tests/examples/Beckers_et_al_2023_Tabulated_Database_Uloop_sCO2_elec.txt
+++ b/tests/examples/Beckers_et_al_2023_Tabulated_Database_Uloop_sCO2_elec.txt
@@ -1,10 +1,9 @@
-#GEOPHIRES v3.0 Input File
-#Last modified on 2024-01-29
-#Example Description: Example 1 from "Tabulated Database of Closed-Loop Geothermal Systems Performance for Cloud-Based Technical and Economic Modeling of Heat Production and Electricity Generation"
-#Koenraad Beckers Yaroslav Vasyliv Gabriela A. Bran-Anleu Mario Martinez Chad Augustine and Mark White
-#Presented at the 48th Stanford Geothermal Workshop Stanford California February 6-8 2023
-#This configuration is water filled U-loop with 1 lateral for direct-use elec using sCO2
-#----------------------------------------------------------------------------------------
+# Example 1 from "Tabulated Database of Closed-Loop Geothermal Systems Performance for Cloud-Based Technical and
+#   Economic Modeling of Heat Production and Electricity Generation"
+# Koenraad Beckers Yaroslav Vasyliv Gabriela A. Bran-Anleu Mario Martinez Chad Augustine and Mark White
+# Presented at the 48th Stanford Geothermal Workshop Stanford California February 6-8 2023
+# This configuration is water filled U-loop with 1 lateral for direct-use elec using sCO2
+
 Is AGS, True
 Closed-loop Configuration, 1, ----uloop
 End-Use Option, 1,        -----elec
@@ -25,11 +24,11 @@ Electricity Rate, 0.10,     ----USD/kWh
 Circulation Pump Efficiency, 0.8, -----[-]
 CO2 Turbine Outlet Pressure, 200
 
-*** Economic/Financial Parameters ***
-*************************************
+# *** Economic/Financial Parameters ***
+# *************************************
 Economic Model,4,			--- Should be 1 (FCR model) 2 (Standard LCOE/LCOH model) 3 (Bicycle model) 4 CLGS.
 Reservoir Stimulation Capital Cost,0,				--- [M$/injection well] Reservoir stimulation capital cost per injection well
 Exploration Capital Cost, 0
 
-*** Simulation Parameters ***
+# *** Simulation Parameters ***
 Print Output to Console,1,		--- [-] Should be 0 (don't print results to console) or 1 (print results to console)
diff --git a/tests/examples/Beckers_et_al_2023_Tabulated_Database_Uloop_sCO2_heat.txt b/tests/examples/Beckers_et_al_2023_Tabulated_Database_Uloop_sCO2_heat.txt
index b78992d3..3ef8ddda 100644
--- a/tests/examples/Beckers_et_al_2023_Tabulated_Database_Uloop_sCO2_heat.txt
+++ b/tests/examples/Beckers_et_al_2023_Tabulated_Database_Uloop_sCO2_heat.txt
@@ -1,10 +1,9 @@
-#GEOPHIRES v3.0 Input File
-#Last modified on 2023-04-12
-#Example Description: Example 1 from "Tabulated Database of Closed-Loop Geothermal Systems Performance for Cloud-Based Technical and Economic Modeling of Heat Production and Electricity Generation"
-#Koenraad Beckers Yaroslav Vasyliv Gabriela A. Bran-Anleu Mario Martinez Chad Augustine and Mark White
-#Presented at the 48th Stanford Geothermal Workshop Stanford California February 6-8 2023
-#This configuration is water filled U-loop with 1 lateral for direct-use heat using sCO2
-#----------------------------------------------------------------------------------------
+# Example 1 from "Tabulated Database of Closed-Loop Geothermal Systems Performance for Cloud-Based Technical and
+#   Economic Modeling of Heat Production and Electricity Generation"
+# Koenraad Beckers Yaroslav Vasyliv Gabriela A. Bran-Anleu Mario Martinez Chad Augustine and Mark White
+# Presented at the 48th Stanford Geothermal Workshop Stanford California February 6-8 2023
+# This configuration is water filled U-loop with 1 lateral for direct-use heat using sCO2
+
 Is AGS, True
 Closed-loop Configuration, 1, ----uloop
 End-Use Option, 2,        -----direct heat
@@ -31,8 +30,8 @@ CO2 Turbine Outlet Pressure, 99
 #same as default Capital Cost for Surface Plant for Direct-use System, 100.00,    ----$/kWth
 #same as default Dead-state Pressure, 1e5,     ---- bar
 
-*** Economic/Financial Parameters ***
-*************************************
+# *** Economic/Financial Parameters ***
+# *************************************
 Economic Model,4,			--- Should be 1 (FCR model) 2 (Standard LCOE/LCOH model) 3 (Bicycle model) 4 CLGS.
 Fraction of Investment in Bonds,0.65,	--- [-] Required if Bicycle model is selected. See manual for details.
 Inflated Bond Interest Rate,0.07,	--- [-] Required if Bicycle model is selected. See manual for details.
@@ -42,5 +41,5 @@ Combined Income Tax Rate,0.392,		--- [-] Required if Bicycle model is selected.
 Gross Revenue Tax Rate,0,		--- [-] Required if Bicycle model is selected. See manual for details.
 Reservoir Stimulation Capital Cost,0,				--- [M$/injection well] Reservoir stimulation capital cost per injection well
 
-*** Simulation Parameters ***
+# *** Simulation Parameters ***
 Print Output to Console,1,		--- [-] Should be 0 (don't print results to console) or 1 (print results to console)
diff --git a/tests/examples/Beckers_et_al_2023_Tabulated_Database_Uloop_water_elec.txt b/tests/examples/Beckers_et_al_2023_Tabulated_Database_Uloop_water_elec.txt
index 19e58b33..4b709ee3 100644
--- a/tests/examples/Beckers_et_al_2023_Tabulated_Database_Uloop_water_elec.txt
+++ b/tests/examples/Beckers_et_al_2023_Tabulated_Database_Uloop_water_elec.txt
@@ -1,10 +1,9 @@
-#GEOPHIRES v3.0 Input File
-#Last modified on 2024-01-29
-#Example Description: Example 1 from "Tabulated Database of Closed-Loop Geothermal Systems Performance for Cloud-Based Technical and Economic Modeling of Heat Production and Electricity Generation"
-#Koenraad Beckers Yaroslav Vasyliv Gabriela A. Bran-Anleu Mario Martinez Chad Augustine and Mark White
-#Presented at the 48th Stanford Geothermal Workshop Stanford California February 6-8 2023
-#This configuration is water filled U-loop with 1 lateral for direct-use heat using water
-#----------------------------------------------------------------------------------------
+# Example 1 from "Tabulated Database of Closed-Loop Geothermal Systems Performance for Cloud-Based Technical and
+#   Economic Modeling of Heat Production and Electricity Generation"
+# Koenraad Beckers Yaroslav Vasyliv Gabriela A. Bran-Anleu Mario Martinez Chad Augustine and Mark White
+# Presented at the 48th Stanford Geothermal Workshop Stanford California February 6-8 2023
+# This configuration is water filled U-loop with 1 lateral for direct-use heat using water
+
 Is AGS, True
 Closed-loop Configuration, 1
 End-Use Option, 1,        -----elec
@@ -24,11 +23,11 @@ Ambient Temperature, 20, ----Deg.C "Dead-state temperature"
 Electricity Rate, 0.10,     ----USD/kWh
 Circulation Pump Efficiency, 0.8, -----[-]
 
-*** Economic/Financial Parameters ***
-*************************************
+# *** Economic/Financial Parameters ***
+# *************************************
 Economic Model,4,			--- Should be 1 (FCR model) 2 (Standard LCOE/LCOH model) 3 (Bicycle model) 4 CLGS.
 Reservoir Stimulation Capital Cost,0,				--- [M$/injection well] Reservoir stimulation capital cost per injection well
 Exploration Capital Cost, 0
 
-*** Simulation Parameters ***
+# *** Simulation Parameters ***
 Print Output to Console,1,		--- [-] Should be 0 (don't print results to console) or 1 (print results to console)
diff --git a/tests/examples/Beckers_et_al_2023_Tabulated_Database_Uloop_water_heat.txt b/tests/examples/Beckers_et_al_2023_Tabulated_Database_Uloop_water_heat.txt
index 1ecda7d5..2bdd5f9d 100644
--- a/tests/examples/Beckers_et_al_2023_Tabulated_Database_Uloop_water_heat.txt
+++ b/tests/examples/Beckers_et_al_2023_Tabulated_Database_Uloop_water_heat.txt
@@ -1,10 +1,9 @@
-#GEOPHIRES v3.0 Input File
-#Last modified on 2023-04-12
-#Example Description: Example 1 from "Tabulated Database of Closed-Loop Geothermal Systems Performance for Cloud-Based Technical and Economic Modeling of Heat Production and Electricity Generation"
-#Koenraad Beckers Yaroslav Vasyliv Gabriela A. Bran-Anleu Mario Martinez Chad Augustine and Mark White
-#Presented at the 48th Stanford Geothermal Workshop Stanford California February 6-8 2023
-#This configuration is water filled U-loop with 1 lateral for direct-use heat usong water
-#----------------------------------------------------------------------------------------
+# Example 1 from "Tabulated Database of Closed-Loop Geothermal Systems Performance for Cloud-Based Technical and
+#   Economic Modeling of Heat Production and Electricity Generation"
+# Koenraad Beckers Yaroslav Vasyliv Gabriela A. Bran-Anleu Mario Martinez Chad Augustine and Mark White
+# Presented at the 48th Stanford Geothermal Workshop Stanford California February 6-8 2023
+# This configuration is water filled U-loop with 1 lateral for direct-use heat using water
+
 Is AGS, True
 Closed-loop Configuration, 1,    ---uloop
 End-Use Option, 2,        -----direct heat
@@ -30,8 +29,8 @@ Circulation Pump Efficiency, 0.8, -----[-]
 #same as default Capital Cost for Surface Plant for Direct-use System, 100.00,    ----$/kWth
 #same as default Dead-state Pressure, 1e5,     ---- bar
 
-*** Economic/Financial Parameters ***
-*************************************
+# *** Economic/Financial Parameters ***
+# *************************************
 Economic Model,4,			--- Should be 1 (FCR model) 2 (Standard LCOE/LCOH model) 3 (Bicycle model) 4 CLGS.
 Fraction of Investment in Bonds,0.65,	--- [-] Required if Bicycle model is selected. See manual for details.
 Inflated Bond Interest Rate,0.07,	--- [-] Required if Bicycle model is selected. See manual for details.
@@ -41,5 +40,5 @@ Combined Income Tax Rate,0.392,		--- [-] Required if Bicycle model is selected.
 Gross Revenue Tax Rate,0,		--- [-] Required if Bicycle model is selected. See manual for details.
 Reservoir Stimulation Capital Cost,0,				--- [M$/injection well] Reservoir stimulation capital cost per injection well
 
-*** Simulation Parameters ***
+# *** Simulation Parameters ***
 Print Output to Console,1,		--- [-] Should be 0 (don't print results to console) or 1 (print results to console)
diff --git a/tests/examples/Fervo_Norbeck_Latimer_2023.txt b/tests/examples/Fervo_Norbeck_Latimer_2023.txt
index c9c66e76..f0634694 100644
--- a/tests/examples/Fervo_Norbeck_Latimer_2023.txt
+++ b/tests/examples/Fervo_Norbeck_Latimer_2023.txt
@@ -1,17 +1,17 @@
---- Case Study: Fervo Energy Whitepaper
---- Norbeck J.H. and Latimer T.M. 2023.
----   "Commercial-Scale Demonstration of a First-of-a-Kind Enhanced Geothermal System."
----   https://doi.org/10.31223/X52X0B
----  Drilling Price paper:
----     "Review Of Drilling Performance In A Horizontal EGS Development"
----     Kareem El-Sadi Brittany Gierke Elliot Howard Christian Gradl
----     https://pangea.stanford.edu/ERE/db/GeoConf/papers/SGW/2024/Elsadi.pdf
---- Looking to make:
----         gross power production of 2 to 3.5 MWe
----         production temperature of 336 degF (169 degC)
----         pumping power 500 to 1000 kW
+# Case Study: Fervo Energy Whitepaper
+#  Norbeck J.H. and Latimer T.M. 2023.
+#    "Commercial-Scale Demonstration of a First-of-a-Kind Enhanced Geothermal System."
+#    https://doi.org/10.31223/X52X0B
+#   Drilling Price paper:
+#      "Review Of Drilling Performance In A Horizontal EGS Development"
+#      Kareem El-Sadi Brittany Gierke Elliot Howard Christian Gradl
+#      https://pangea.stanford.edu/ERE/db/GeoConf/papers/SGW/2024/Elsadi.pdf
+#  Looking to make:
+#          gross power production of 2 to 3.5 MWe
+#          production temperature of 336 degF (169 degC)
+#          pumping power 500 to 1000 kW
 
-***Reservoir Parameters***
+# ***Reservoir Parameters***
 Reservoir Model, 1
 Reservoir Volume Option,1,					---Should be 1 2 3 or 4. See manual for details.
 Reservoir Density, 2800, per the paper phyllite + quartzite + diorite + granodiorite,
@@ -27,7 +27,7 @@ Number of Segments,1
 Gradient 1, 76.74, per the paper
 Plant Outlet Pressure, 1500 psi, per the paper
 
-*** Wellbore Parameters***
+# *** Wellbore Parameters***
 Number of Injection Wells, 1,					---[-]
 Number of Production Wells,1,					---[-]
 Well Geometry Configuration, 4,       ----L
@@ -49,7 +49,7 @@ Utilization Factor,.9,						---[-]Water Loss Fraction, .02x
 Water Loss Fraction,0.02,						---[-]
 Maximum Drawdown,1,						---[-] no redrilling considered
 
-***Surfaceplant Parameters***
+# ***Surfaceplant Parameters***
 Ambient Temperature, 8 degC, per the paper. Published ambient is 10.27 degC
 Surface Temperature, 8 degC, per the paper. Published ambient is 10.27 degC
 End-Use Option,1,						---electricity as the main product
@@ -58,7 +58,7 @@ Power Plant Type,2,						---supercritical binary cycle
 End-Use Efficiency Factor,.9,					---[-]
 Circulation Pump Efficiency, 0.80, per the paper
 
-*** Economic Parameters***
+# *** Economic Parameters***
 Economic Model,3,						---BICYCLE Levelized Cost Model
 Starting Electricity Sale Price,0.15
 Ending Electricity Sale Price,1.00, essentially no limit s the rate can rise continuously with inflation
@@ -74,6 +74,6 @@ Investment Tax Credit Rate,0,					---[-] Required for BICYCLE model
 Inflation Rate During Construction, 0.05,				---[-]
 Property Tax Rate,0,						---[-] Required for BICYCLE model
 
-***Other Parameters***
+# ***Other Parameters***
 Print Output to Console, 1,					---Should be 1 (to print) or 0 (to not print)
 Time steps per year,10,						---[-]
diff --git a/tests/examples/S-DAC-GT.txt b/tests/examples/S-DAC-GT.txt
index b86772f2..9cf16ec8 100644
--- a/tests/examples/S-DAC-GT.txt
+++ b/tests/examples/S-DAC-GT.txt
@@ -1,11 +1,9 @@
-GEOPHIRES v3.0 Input File
-Geothermal Combined Heat and Power Problem using a Thermal Drawdown Reservoir Model and BICYCLE Economic Model and Solid Sorbent Direct Air Capture powered by geothermal
-
-Based on Example 3 description: This example problem considers an EGS reservoir at 3.1km depth.
-The heat is used in a combined heat and power topping cycle model with double flash as
-topping cycle and electricity considered as the main product.
-
-But only lists those parameters that are different than their default values
+# Geothermal Combined Heat and Power Problem using a Thermal Drawdown Reservoir Model and BICYCLE Economic Model and
+# Solid Sorbent Direct Air Capture powered by geothermal
+# Based on Example 3 description: This example problem considers an EGS reservoir at 3.1km depth.
+# The heat is used in a combined heat and power topping cycle model with double flash as
+# topping cycle and electricity considered as the main product.
+# But only lists those parameters that are different than their default values
 
 Do S-DAC-GT Calculations, True
 
diff --git a/tests/examples/SUTRAExample1.txt b/tests/examples/SUTRAExample1.txt
index 5eb32aa5..ea027366 100644
--- a/tests/examples/SUTRAExample1.txt
+++ b/tests/examples/SUTRAExample1.txt
@@ -1,13 +1,8 @@
-GEOPHIRES v3.0 Input File
-Created on 2023-11-03
-Last modified on 2024-01-18
-Reservoir thermal energy storage simulated with SUTRA
+# Example: SUTRA: Reservoir thermal energy storage simulated with SUTRA
+# This example reads in a SUTRA simulation result and calculate techno-economics of seasonal reservoir thermal energy storage.
 
-This example reads in a SUTRA simulation result and calculate techno-economics of seasonal reservoir thermal energy storage.
-
-
-***Subsurface technical parameters***
-*************************************
+# ***Subsurface technical parameters***
+# *************************************
 Reservoir Model,7,                        			---Reads in SUTRA result for seasonal reservoir thermal energy storage
 SUTRA Annual Heat File Name,Examples/annual_heat.csv,			---SUTRA file with heat stored, heat supplied and efficiency for each year
 SUTRA Heat Budget File Name,Examples/heat_budget.csv,			---SUTRA file with target heat and simulated heat for each SUTRA time step over lifetime
@@ -25,22 +20,22 @@ Production Wellbore Temperature Drop,0,				---[deg.C]
 Injection Wellbore Temperature Gain,0,   			---[deg.C]
 Reservoir Impedance,0.2,					---[GPa*s/m3]
 
-***SURFACE TECHNICAL PARAMETERS***
-**********************************
+# ***SURFACE TECHNICAL PARAMETERS***
+# **********************************
 End-Use Option,2,			  			        ---[-] Direct-Use Heat
 Circulation Pump Efficiency,.8,	  				---[-] between .1 and 1
 Power Plant Type,8,                             ---[-] Reservoir Thermal Energy Storage
 
-***FINANCIAL PARAMETERS***
-**************************
+# ***FINANCIAL PARAMETERS***
+# **************************
 Plant Lifetime,30,			  			---[years]
 Economic Model,2,			  			---[-] Standard Levelized Cost Model
 Fixed Charge Rate,.05,			 			---[-] between 0 and 1
 Inflation Rate During Construction,0,   			---[-]
 End-Use Efficiency Factor,1,					---[-] End-Use Efficiency
 
-***CAPITAL AND O&M COST PARAMETERS***
-*************************************
+# ***CAPITAL AND O&M COST PARAMETERS***
+# *************************************
 Well Drilling and Completion Capital Cost Adjustment Factor,1,	---[-] Use built-in correlations
 Well Drilling Cost Correlation,1,				---[-] Use built-in correlations
 Reservoir Stimulation Capital Cost Adjustment Factor,1,		---[-] Use built-in correlations
@@ -52,6 +47,6 @@ Surface Plant O&M Cost Adjustment Factor,1,			---[-] Use built-in correlations
 Water Cost Adjustment Factor,1,					---[-] Use built-in correlations
 
 
-***Simulation Parameters***
-***************************
+# ***Simulation Parameters***
+# ***************************
 Print Output to Console,1,		  			---[-] Should be 0 (don't print results) or 1 (print results)
diff --git a/tests/examples/Wanju_Yuan_Closed-Loop_Geothermal_Energy_Recovery.txt b/tests/examples/Wanju_Yuan_Closed-Loop_Geothermal_Energy_Recovery.txt
index ba4b2602..b7dcf31d 100644
--- a/tests/examples/Wanju_Yuan_Closed-Loop_Geothermal_Energy_Recovery.txt
+++ b/tests/examples/Wanju_Yuan_Closed-Loop_Geothermal_Energy_Recovery.txt
@@ -1,16 +1,11 @@
-----------------------------------------------------------------------------------------
-GEOPHIRES v3.0 Input File
-Geothermal Electricity Example Problem using Percentage Thermal Drawdown Model (Example X) and closed loops
-Originally created by NREL on 2018-03-26 as Example 4
-Last modified on 2023-09-29
+# Example: Geothermal Electricity Example Problem using Percentage Thermal Drawdown Model and closed loops
+# Description: This example problem considers a simple reservoir
+# at 2 km depth with an initial production temperature of 145deg.C. The thermal drawdown
+# is assumed linear at 0.5%/year. The heat is converted to electricity with a subcritical
+# ORC. It is accessed by a closed loop well.
 
-Example X Description: This example problem considers a simple reservoir
-at 2 km depth with an initial production temperature of 145deg.C. The thermal drawdown
-is assumed linear at 0.5%/year. The heat is converted to electricity with a subcritical
-ORC. It is accessed by a closed loop well.
-----------------------------------------------------------------------------------------
-*** closed loop parameters ***
-****************************************
+# *** closed loop parameters ***
+# ****************************************
 Is AGS, True
 Has Nonvertical Section, True
 Multilaterals Cased, True
@@ -37,10 +32,8 @@ Number of Production Wells,1,            			---[-]
 Number of Injection Wells,1,            			---[-]
 
 
-
-
-*** Subsurface technical parameters ***
-****************************************
+# *** Subsurface technical parameters ***
+# ****************************************
 Ramey Production Wellbore Model,0,	--- Should be 0 (disable) or 1 (enable)
 Production Wellbore Temperature Drop,0,	--- [deg.C]
 Production Flow Rate per Well,110, 	--- [kg/s]
@@ -50,15 +43,15 @@ Reservoir Volume,1e9,			--- [m3] (required for reservoir volume option 3 and 4
 Reservoir Heat Capacity,1050,		--- [J/kg/K]
 
 
-*** Surface technical parameters ***
-************************************
+# *** Surface technical parameters ***
+# ************************************
 End-Use Option,1,			--- [-] Electricity
 Power Plant Type,1,			--- [1] Subcritical ORC
 Circulation Pump Efficiency,0.8,	--- [-]
 Plant Outlet Pressure, 68.95
 
-*** Economic/Financial Parameters ***
-*************************************
+# *** Economic/Financial Parameters ***
+# *************************************
 Economic Model,3,			--- Should be 1 (FCR model) 2 (Standard LCOE/LCOH model) or 3 (Bicycle model).
 Fraction of Investment in Bonds,0.65,	--- [-] Required if Bicycle model is selected. See manual for details.
 Inflated Bond Interest Rate,0.07,	--- [-] Required if Bicycle model is selected. See manual for details.
@@ -69,5 +62,5 @@ Gross Revenue Tax Rate,0,		--- [-] Required if Bicycle model is selected. See ma
 Reservoir Stimulation Capital Cost,0,				--- [M$/injection well] Reservoir stimulation capital cost per injection well
 
 
-*** Simulation Parameters ***
+# *** Simulation Parameters ***
 Print Output to Console,1,		--- [-] Should be 0 (don't print results to console) or 1 (print results to console)
diff --git a/tests/examples/example1.txt b/tests/examples/example1.txt
index 08deaa35..b91580fd 100644
--- a/tests/examples/example1.txt
+++ b/tests/examples/example1.txt
@@ -1,15 +1,11 @@
-GEOPHIRES v2.0 Input File
-Created on 2018-06-11
-Last modified on 2024-02-28
-Geothermal Electricity Problem using a Multiple Parallel Fractures Model
+# Example 1: Geothermal Electricity Problem using a Multiple Parallel Fractures Model
+# This problem considers an EGS reservoir at 3km depth.
+# Ramey's model is applied to simulate production wellbore heat losses. The heat
+# is used in for electricity application with a reinjection temperature of 50deg.C.
 
-Example 1 Description: This problem considers an EGS reservoir at 3km depth.
-Ramey's model is applied to simulate production wellbore heat losses. The heat
-is used in for electricity application with a reinjection temperature of 50deg.C.
 
-
-***Subsurface technical parameters***
-*************************************
+# ***Subsurface technical parameters***
+# *************************************
 Reservoir Model,1,                        			---Multiple Fractures reservoir model
 Reservoir Depth,3,                     				---[km]
 Number of Segments,1,                  				---[-]
@@ -37,8 +33,8 @@ Reservoir Heat Capacity,1000,		  			---[J/kg/K]
 Reservoir Density,2700,			  			---[kg/m^3]
 Reservoir Thermal Conductivity,2.7,	  			---[W/m/K]
 
-***SURFACE TECHNICAL PARAMETERS***
-**********************************
+# ***SURFACE TECHNICAL PARAMETERS***
+# **********************************
 End-Use Option,1,			  			---[-] Electricity
 Power Plant Type,2,			  			---[-] Supercritical ORC
 Circulation Pump Efficiency,.8,	  				---[-] between .1 and 1
@@ -46,15 +42,15 @@ Utilization Factor,.9,			  			---[-] between .1 and 1
 Surface Temperature,20,		  				---[deg.C]
 Ambient Temperature,20,		 				---[deg.C]
 
-***FINANCIAL PARAMETERS***
-**************************
+# ***FINANCIAL PARAMETERS***
+# **************************
 Plant Lifetime,30,			  			---[years]
 Economic Model,1,			  			---[-] Fixed Charge Rate Model
 Fixed Charge Rate,.05,			 			---[-] between 0 and 1
 Inflation Rate During Construction,0,   			---[-]
 
-***CAPITAL AND O&M COST PARAMETERS***
-*************************************
+#***CAPITAL AND O&M COST PARAMETERS***
+# *************************************
 Well Drilling and Completion Capital Cost Adjustment Factor,1,	---[-] Use built-in correlations
 Well Drilling Cost Correlation,1,				---[-] Use built-in correlations
 Reservoir Stimulation Capital Cost Adjustment Factor,1,		---[-] Use built-in correlations
@@ -66,8 +62,8 @@ Surface Plant O&M Cost Adjustment Factor,1,			---[-] Use built-in correlations
 Water Cost Adjustment Factor,1,					---[-] Use built-in correlations
 
 
-***Simulation Parameters***
-***************************
+# ***Simulation Parameters***
+#***************************
 
 Print Output to Console,1,		  			---[-] Should be 0 (don't print results) or 1 (print results)
 Time steps per year,6,		  				---[1/year]
diff --git a/tests/examples/example10_HP.txt b/tests/examples/example10_HP.txt
index c72f4440..d1e7c5ee 100644
--- a/tests/examples/example10_HP.txt
+++ b/tests/examples/example10_HP.txt
@@ -1,12 +1,10 @@
-GEOPHIRES v2.0 Input File
-Geothermal Combined Heat and Power Problem using a Thermal Drawdown Reservoir Model and BICYCLE Economic Model
+# Example 10: Heat Pump: Geothermal Combined Heat and Power Problem using a Thermal Drawdown Reservoir Model and BICYCLE Economic Model
+# This example problem considers an EGS reservoir at 3.1km depth.
+# The heat is used in a combined heat and power topping cycle model with double flash as
+# topping cycle and electricity considered as the main product.
 
-Example 3 description: This example problem considers an EGS reservoir at 3.1km depth.
-The heat is used in a combined heat and power topping cycle model with double flash as
-topping cycle and electricity considered as the main product.
-
-***Subsurface technical parameters***
-*************************************
+# ***Subsurface technical parameters***
+# *************************************
 Reservoir Model,3,						---m/A Single Fracture Thermal Drawdown
 Drawdown Parameter,.00002,					---[kg/s/m2]
 Reservoir Depth,2.1,						---[km]
@@ -34,8 +32,8 @@ Reservoir Density,3000,						---[kg/m3]
 Reservoir Thermal Conductivity,3,				---[W/m/K]
 Water Loss Fraction,0.02,						---[-]
 
-***Surface Technical Parameters***
-**********************************
+# ***Surface Technical Parameters***
+# **********************************
 
 End-Use Option, 2, --- Direct use
 Power Plant Type, 6,				---[-] Heat Pump
@@ -47,16 +45,16 @@ Ambient Temperature,15,						---[deg.C]
 Heat Pump COP, 2.8,            --- [-]
 
 
-***Financial Parameters***
-**************************
+# ***Financial Parameters***
+# **************************
 
 Plant Lifetime,30,						---[years]
 Economic Model,2,						---BICYCLE Levelized Cost Model
 Discount Rate, 0.05,			--- [-] Required if Standard LCOE/LCOH model is selected. See manual for details.
 Inflation Rate During Construction,0.05,				---[-]
 
-***Capital and O&M Cost Parameters***
-*************************************
+# ***Capital and O&M Cost Parameters***
+# *************************************
 
 Well Drilling and Completion Capital Cost Adjustment Factor,1, 	---[-] use built in correlations
 Well Drilling Cost Correlation,1,				---[-] use built in correlations
@@ -71,8 +69,8 @@ Electricity Rate,.07,							---[$/kWh]
 Heat Pump Capital Cost,3.74,               --- [$M]
 
 
-***Simulation Parameters***
-***************************
+# ***Simulation Parameters***
+# ***************************
 
 Print Output to Console,1,					---Should be 1 (to print) or 0 (to not print)
 Time steps per year,10,						---[-]
diff --git a/tests/examples/example11_AC.txt b/tests/examples/example11_AC.txt
index 4e2398ed..ceb9d1cd 100644
--- a/tests/examples/example11_AC.txt
+++ b/tests/examples/example11_AC.txt
@@ -1,7 +1,7 @@
+# Example 11: Absorption Chiller
 
-
-***Subsurface technical parameters***
-*************************************
+# ***Subsurface technical parameters***
+# *************************************
 Reservoir Model,3,						---m/A Single Fracture Thermal Drawdown
 Drawdown Parameter,.00002,					---[kg/s/m2]
 Reservoir Depth,2.1,						---[km]
@@ -29,8 +29,8 @@ Reservoir Density,3000,						---[kg/m3]
 Reservoir Thermal Conductivity,3,				---[W/m/K]
 Water Loss Fraction,0.02,						---[-]
 
-***Surface Technical Parameters***
-**********************************
+# ***Surface Technical Parameters***
+# **********************************
 End-Use Option,2, --- Direct use
 Power Plant Type, 5,				---[-] Absorption Chiller
 Circulation Pump Efficiency,.80,				---[-]
@@ -40,16 +40,16 @@ Surface Temperature,15,						---[deg.C]
 Ambient Temperature,15,						---[deg.C]
 Absorption Chiller COP, 0.72,            --- [-]
 
-***Financial Parameters***
-**************************
+# ***Financial Parameters***
+# **************************
 
 Plant Lifetime,30,						---[years]
 Economic Model,2,						---BICYCLE Levelized Cost Model
 Discount Rate, 0.05,			--- [-] Required if Standard LCOE/LCOH model is selected. See manual for details.
 Inflation Rate During Construction,0.05,				---[-]
 
-***Capital and O&M Cost Parameters***
-*************************************
+# ***Capital and O&M Cost Parameters***
+# *************************************
 
 Well Drilling and Completion Capital Cost Adjustment Factor,1, 	---[-] use built in correlations
 Well Drilling Cost Correlation,1,				---[-] use built in correlations
@@ -64,8 +64,8 @@ Electricity Rate,.07,							---[$/kWh]
 Absorption Chiller Capital Cost,3.74,               --- [$M]
 Absorption Chiller O&M Cost,0.065,               --- [$M/year]
 
-***Simulation Parameters***
-***************************
+# ***Simulation Parameters***
+# ***************************
 
 Print Output to Console,1,					---Should be 1 (to print) or 0 (to not print)
 Time steps per year,10,						---[-]
diff --git a/tests/examples/example12_DH.txt b/tests/examples/example12_DH.txt
index a4027934..2e957211 100644
--- a/tests/examples/example12_DH.txt
+++ b/tests/examples/example12_DH.txt
@@ -1,26 +1,12 @@
-----------------------------------------------------------------------------------------
-GEOPHIRES v2.0 Input File
-Geothermal Electricity Example Problem using Percentage Thermal Drawdown Model (Example 4)
-Created by Charley Walton on 2022-07-25
-Last modified on 2024-01-04
+# Example 12: District Heating: Geothermal Electricity Example Problem using Percentage Thermal Drawdown Model
+# This example considers Cornell's existing district heating network assesses
+# the performance of a proposed geothermal well. A known heat demand profile for the district
+# is processed using the district_heat.py module See Charley Walton's SULI Research Report
+# "Techno-Economic Simulations of Geothermal District Heating Systems with GEOPHIRES" for
+# more details on the case study.
 
-Description: This example considers Cornell's existing district heating network assesses
-the performance of a proposed geothermal well. A known heat demand profile for the district
-is processed using the district_heat.py module See Charley Walton's SULI Research Report
-"Techno-Economic Simulations of Geothermal District Heating Systems with GEOPHIRES" for
-more details on the case study.
-
-Note: The GEOPHIRES v2.0 python code scans the input file for each necessary "parameter,
-value". Therefore, the user cannot change the string before the parameter value and the
-comma is the required delimiter. Each parameter string may only appear once in this
-input file. However, the parameters can be in any order and comments can be added
-either by including extra lines or by typing it after the parameter value, separated by
-a comma (see examples below). If a necessary parameter is not provided, a default value
-is assumed, and a warning message is printed to the console.
-----------------------------------------------------------------------------------------
-
-*** Subsurface technical parameters ***
-****************************************
+# *** Subsurface technical parameters ***
+# ****************************************
 Reservoir Model,4,			--- Percentage thermal drawdown model
 Drawdown Parameter,0.003, 		--- In [1/year].
 Reservoir Depth,3.5, 			--- [km]
@@ -47,8 +33,8 @@ Reservoir Density,2700,			--- [kg/m3]
 Reservoir Thermal Conductivity,3,	--- [W/m/K]
 
 
-*** Surface technical parameters ***
-************************************
+# *** Surface technical parameters ***
+# ************************************
 End-Use Option,2, --- Direct use
 Power Plant Type, 7,				---[-] District Heating
 Circulation Pump Efficiency,0.8,	--- [-]
@@ -68,8 +54,8 @@ District Heating Piping Cost Rate,1200,					--- [$/m] used for calculating surfa
 District Heating Road Length,3, 				---[km] supersedes model option 2 if any value is entered
 
 
-*** Economic/Financial Parameters ***
-*************************************
+# *** Economic/Financial Parameters ***
+# *************************************
 Plant Lifetime,30,						--- [years]
 Economic Model,2,						--- Should be 1 (FCR model), 2 (Standard LCOE/LCOH model), or 3 (Bicycle model).
 Discount Rate,0.05,
@@ -85,6 +71,6 @@ Water Cost Adjustment Factor,1,					--- [-] Use built-in water cost correlation
 Surface Plant O&M Cost Adjustment Factor,1,			--- [-] Use built-in surface plant O&M cost correlation as is
 
 
-*** Simulation Parameters ***
+# *** Simulation Parameters ***
 Print Output to Console,1,		--- [-] Should be 0 (don't print results to console) or 1 (print results to console)
 Time steps per year,3,			--- [1/year]
diff --git a/tests/examples/example13.txt b/tests/examples/example13.txt
index b5957819..bb4e8730 100644
--- a/tests/examples/example13.txt
+++ b/tests/examples/example13.txt
@@ -1,12 +1,7 @@
-----------------------------------------------------------------------------------------
-GEOPHIRES v3.0 Input File
-Example 13
-This example file tests redrilling due to excessive drawdown and use of cogen bottoming cycle as end-use
-Created by Koenraad Beckers on 2023-11-20
-----------------------------------------------------------------------------------------
+# Example 13: This example file tests redrilling due to excessive drawdown and use of cogen bottoming cycle as end-use
 
-*** Subsurface technical parameters ***
-****************************************
+# *** Subsurface technical parameters ***
+# ****************************************
 Reservoir Model,4,			--- Percentage thermal drawdown model
 Drawdown Parameter,0.01, 		--- In [1/year].
 Reservoir Depth,4, 			--- [km]
@@ -33,8 +28,8 @@ Reservoir Density,2700,			--- [kg/m3]
 Reservoir Thermal Conductivity,3,	--- [W/m/K]
 
 
-*** Surface technical parameters ***
-************************************
+# *** Surface technical parameters ***
+# ************************************
 End-Use Option,42,			--- [-] Co-gen bottoming cycle with heat the main product
 Circulation Pump Efficiency,0.8,	--- [-]
 Utilization Factor,0.8,			--- [-]
@@ -53,8 +48,8 @@ District Heating Piping Cost Rate,1200,					--- [$/m] used for calculating surfa
 District Heating Road Length,3, 				---[km] supersedes model option 2 if any value is entered
 
 
-*** Economic/Financial Parameters ***
-*************************************
+# *** Economic/Financial Parameters ***
+# *************************************
 Plant Lifetime,30,						--- [years]
 Economic Model,2,						--- Should be 1 (FCR model), 2 (Standard LCOE/LCOH model), or 3 (Bicycle model).
 Discount Rate,0.05,
@@ -70,6 +65,6 @@ Water Cost Adjustment Factor,1,					--- [-] Use built-in water cost correlation
 Surface Plant O&M Cost Adjustment Factor,1,			--- [-] Use built-in surface plant O&M cost correlation as is
 
 
-*** Simulation Parameters ***
+# *** Simulation Parameters ***
 Print Output to Console,1,		--- [-] Should be 0 (don't print results to console) or 1 (print results to console)
 Time steps per year,3,			--- [1/year]
diff --git a/tests/examples/example1_addons.txt b/tests/examples/example1_addons.txt
index d05b6148..e6e24cb7 100644
--- a/tests/examples/example1_addons.txt
+++ b/tests/examples/example1_addons.txt
@@ -1,3 +1,5 @@
+# Example 1 with Addons
+
 Do AddOn Calculations, True
 Do Carbon Price Calculations, True
 
@@ -65,8 +67,8 @@ Reservoir Heat Capacity,1000,		  			---[J/kg/K]
 Reservoir Density,2700,			  			---[kg/m^3]
 Reservoir Thermal Conductivity,2.7,	  			---[W/m/K]
 
-***SURFACE TECHNICAL PARAMETERS***
-**********************************
+# ***SURFACE TECHNICAL PARAMETERS***
+# **********************************
 End-Use Option,1,			  			---[-] Electricity
 Economic Model,1,			  			---[-] Fixed Charge Rate Model
 Power Plant Type,2,			  			---[-] Supercritcal ORC
@@ -75,14 +77,14 @@ Utilization Factor,.9,			  			---[-] between .1 and 1
 Surface Temperature,20,		  				---[deg.C]
 Ambient Temperature,20,		 				---[deg.C]
 
-***FINANCIAL PARAMETERS***
-**************************
+# ***FINANCIAL PARAMETERS***
+# **************************
 Plant Lifetime,30,			  			---[years]
 Fixed Charge Rate,.05,			 			---[-] between 0 and 1
 Inflation Rate During Construction,0,   			---[-]
 
-***Simulation Parameters***
-***************************
+# ***Simulation Parameters***
+# ***************************
 
 Print Output to Console,1,		  			---[-] Should be 0 (don't print results) or 1 (print results)
 Time steps per year,6,		  				---[1/year]
diff --git a/tests/examples/example1_outputunits.txt b/tests/examples/example1_outputunits.txt
index ced2a023..6045c5c2 100644
--- a/tests/examples/example1_outputunits.txt
+++ b/tests/examples/example1_outputunits.txt
@@ -1,3 +1,5 @@
+# Example 1 with different output units specified
+
 Reservoir Model,1,                        			---Multiple, Fractures, reservoir, model
 Reservoir Depth,3,                     				---[km]
 Number of Segments,1,                  				---[-]
@@ -25,8 +27,8 @@ Reservoir Heat Capacity,1000,		  			---[J/kg/K]
 Reservoir Density,2700,			  			---[kg/m^3]
 Reservoir Thermal Conductivity,2.7,	  			---[W/m/K]
 
-***SURFACE TECHNICAL PARAMETERS***
-**********************************
+# ***SURFACE TECHNICAL PARAMETERS***
+# **********************************
 End-Use Option,1,			  			---[-] Electricity
 Economic Model,1,			  			---[-] Fixed Charge Rate Model
 Power Plant Type,2,			  			---[-] Supercritcal ORC
@@ -35,22 +37,22 @@ Utilization Factor,.9,			  			---[-] between .1 and 1
 Surface Temperature,20,		  				---[deg.C]
 Ambient Temperature,20,		 				---[deg.C]
 
-***FINANCIAL PARAMETERS***
-**************************
+# ***FINANCIAL PARAMETERS***
+# **************************
 Plant Lifetime,30,			  			---[years]
 Fixed Charge Rate,.05,			 			---[-] between 0 and 1
 Inflation Rate During Construction,0,   			---[-]
 
-***Simulation Parameters***
-***************************
+# ***Simulation Parameters***
+# ***************************
 
 Print Output to Console,1,		  			---[-] Should be 0 (don't print results) or 1 (print results)
 Time steps per year,6,		  				---[1/year]
 
-***Output unit conversions you wish to make***
-***************************
-Units:Bottom-hole temperature, degF,  ---[This is what I want the units to be for this output parameter
+# ***Output unit conversions you wish to make***
+# ***************************
+Units:Bottom-hole temperature, degF,  ---[This is what I want the units to be for this output parameter]
 
--- See https://github.com/NREL/GEOPHIRES-X/issues/236 re: currency conversions.
--- Units:Exploration cost,MEUR,  ---[This is what I want the units to be for this output parameter
--- Units:O&M Make-up Water costs, MEUR/yr
+# See https://github.com/NREL/GEOPHIRES-X/issues/236 re: currency conversions.
+# Units:Exploration cost,MEUR,  ---[This is what I want the units to be for this output parameter
+# Units:O&M Make-up Water costs, MEUR/yr
diff --git a/tests/examples/example2.txt b/tests/examples/example2.txt
index 87acf81c..2d338951 100644
--- a/tests/examples/example2.txt
+++ b/tests/examples/example2.txt
@@ -1,14 +1,10 @@
-GEOPHIRES v2.0 Input File
-Created on 2018-06-11
-Last modified on 2018-06-11
-Geothermal Direct-Use Example Problem using a Linear Heat Sweep Model.
+# Example 2: Geothermal Direct-Use Example Problem using a Linear Heat Sweep Model.
+# This problem considers an EGS reservoir at 3km depth.
+# Ramey's model is applied to simulate production wellbore heat losses. The heat
+# is used in direct-use heat application with reinjection temperature of 70deg.C
 
-Example 2 Description: This problem considers an EGS reservoir at 3km depth.
-Ramey's model is applied to simulate production wellbore heat losses. The heat
-is used in direct-use heat application with reinjection temperature of 70deg.C
-
-***Subsurface Technical Parameters***
-*************************************
+# ***Subsurface Technical Parameters***
+# *************************************
 
 Reservoir Model,2,						---Linear Heat Sweep Model
 Reservoir Depth,3,						---[km]
@@ -33,24 +29,24 @@ Reservoir Density,3000,						---[kg/m3]
 Reservoir Thermal Conductivity,3.2,				---[W/m/K]
 Reservoir Porosity,.1,						---[-]
 
-***Surface Technical Parameters***
-**********************************
+# ***Surface Technical Parameters***
+# **********************************
 End-Use Option,2,						---Direct Use Heat
 Circulation Pump Efficiency,.8,					---[-]
 Utilization Factor,.9,						---[-]
 End-Use Efficiency Factor,.9,					---[-]
 Surface Temperature,15,						---[deg.C]
 
-***Financial Parameters***
-**************************
+# ***Financial Parameters***
+# **************************
 
 Plant Lifetime,25,						---[years]
 Economic Model,2,						---Standard Levelized Cost Model
 Discount Rate,.05,						---[-]
 Inflation Rate During Construction,0,				---[-]
 
-***Capital and O&M Cost Parameters***
-*************************************
+# ***Capital and O&M Cost Parameters***
+# *************************************
 
 Well Drilling and Completion Capital Cost Adjustment Factor,1,	---[M$/well] Use built-in correlations
 Well Drilling Cost Correlation,1,				---[-]
@@ -63,7 +59,7 @@ Surface Plant O&M Cost Adjustment Factor,1,			---[-] Use built-in correlations
 Water Cost Adjustment Factor,1,					---[-] Use built-in correlations
 Electricity Rate,.05,						---[$/kWh]
 
-***Simulation Parameters***
-***************************
+# ***Simulation Parameters***
+# ***************************
 Print Output to Console,1,					---should be either 0 (do not show) or 1 (show)
 Time steps per year,3,						---[-]
diff --git a/tests/examples/example3.txt b/tests/examples/example3.txt
index b355ade3..1d21c524 100644
--- a/tests/examples/example3.txt
+++ b/tests/examples/example3.txt
@@ -1,12 +1,10 @@
-GEOPHIRES v2.0 Input File
-Geothermal Combined Heat and Power Problem using a Thermal Drawdown Reservoir Model and BICYCLE Economic Model
+# Example 3: Geothermal Combined Heat and Power Problem using a Thermal Drawdown Reservoir Model and BICYCLE Economic Model
+# This example problem considers an EGS reservoir at 3.1km depth.
+# The heat is used in a combined heat and power topping cycle model with double flash as
+# topping cycle and electricity considered as the main product.
 
-Example 3 description: This example problem considers an EGS reservoir at 3.1km depth.
-The heat is used in a combined heat and power topping cycle model with double flash as
-topping cycle and electricity considered as the main product.
-
-***Subsurface technical parameters***
-*************************************
+# ***Subsurface technical parameters***
+# *************************************
 Reservoir Model,3,						---m/A Single Fracture Thermal Drawdown
 Drawdown Parameter,.00002,					---[kg/s/m2]
 Reservoir Depth,3.1,						---[km]
@@ -34,8 +32,8 @@ Reservoir Density,3000,						---[kg/m3]
 Reservoir Thermal Conductivity,3,				---[W/m/K]
 Water Loss Fraction,0.02,						---[-]
 
-***Surface Technical Parameters***
-**********************************
+# ***Surface Technical Parameters***
+# **********************************
 
 End-Use Option,31,						---CHP Topping Cycle with electricity as the main product
 Power Plant Type,4,						---Double-Flash
@@ -45,8 +43,8 @@ End-Use Efficiency Factor,.9,					---[-]
 Surface Temperature,15,						---[deg.C]
 Ambient Temperature,15,						---[deg.C]
 
-***Financial Parameters***
-**************************
+# ***Financial Parameters***
+# **************************
 
 Plant Lifetime,35,						---[years]
 Economic Model,3,						---BICYCLE Levelized Cost Model
@@ -60,8 +58,8 @@ Investment Tax Credit Rate,0,					---[-] Required for BICYCLE model
 Property Tax Rate,0,						---[-] Required for BICYCLE model
 Inflation Rate During Construction,0.05,				---[-]
 
-***Capital and O&M Cost Parameters***
-*************************************
+# ***Capital and O&M Cost Parameters***
+# *************************************
 
 Well Drilling and Completion Capital Cost Adjustment Factor,1, 	---[-] use built in correlations
 Well Drilling Cost Correlation,1,				---[-] use built in correlations
@@ -74,8 +72,8 @@ Surface Plant O&M Cost Adjustment Factor,1,			---[-] use built in correlations
 Water Cost Adjustment Factor,1,					---[-] use built in correlations
 Heat Rate,.02,							---[$/kWh]
 
-***Simulation Parameters***
-***************************
+# ***Simulation Parameters***
+# ***************************
 
 Print Output to Console,1,					---Should be 1 (to print) or 0 (to not print)
 Time steps per year,10,						---[-]
diff --git a/tests/examples/example4.txt b/tests/examples/example4.txt
index dd43ded5..38dd49f4 100644
--- a/tests/examples/example4.txt
+++ b/tests/examples/example4.txt
@@ -1,17 +1,10 @@
-----------------------------------------------------------------------------------------
-GEOPHIRES v2.0 Input File
-Geothermal Electricity Example Problem using Percentage Thermal Drawdown Model (Example 4)
-Created by NREL on 2018-03-26
-Last modified on 2018-06-12
+# Example 4: Geothermal Electricity Example Problem using Percentage Thermal Drawdown Model
+# This example problem considers a simple hydrothermal reservoir
+# at 2 km depth with an initial production temperature of 145deg.C. The thermal drawdown
+# is assumed linear at 0.5%/year. The heat is converted to electricity with a subcritical ORC.
 
-Example 4 Description: This example problem considers a simple hydrothermal reservoir
-at 2 km depth with an initial production temperature of 145deg.C. The thermal drawdown
-is assumed linear at 0.5%/year. The heat is converted to electricity with a subcritical
-ORC.
-----------------------------------------------------------------------------------------
-
-*** Subsurface technical parameters ***
-****************************************
+# *** Subsurface technical parameters ***
+# ****************************************
 Reservoir Model,4,			--- Percentage thermal drawdown model
 Drawdown Parameter,0.005, 		--- In [1/year].
 Reservoir Depth,2, 			--- [km]
@@ -38,8 +31,8 @@ Reservoir Density,2700,			--- [kg/m3]
 Reservoir Thermal Conductivity,3,	--- [W/m/K]
 
 
-*** Surface technical parameters ***
-************************************
+# *** Surface technical parameters ***
+# ************************************
 End-Use Option,1,			--- [-] Electricity
 Power Plant Type,1,			--- [1] Subcritical ORC
 Circulation Pump Efficiency,0.8,	--- [-]
@@ -47,8 +40,8 @@ Utilization Factor,0.9,			--- [-]
 Surface Temperature,15,			--- [deg.C]
 Ambient Temperature,15,			--- [deg.C]
 
-*** Economic/Financial Parameters ***
-*************************************
+# *** Economic/Financial Parameters ***
+# *************************************
 Plant Lifetime,30,			--- [years]
 Economic Model,3,			--- Should be 1 (FCR model) 2 (Standard LCOE/LCOH model) or 3 (Bicycle model).
 Fraction of Investment in Bonds,0.65,	--- [-] Required if Bicycle model is selected. See manual for details.
@@ -71,6 +64,6 @@ Water Cost Adjustment Factor,1,					--- [-] Use built-in water cost correlation
 Surface Plant O&M Cost Adjustment Factor,1,			--- [-] Use built-in surface plant O&M cost correlation as is
 
 
-*** Simulation Parameters ***
+# *** Simulation Parameters ***
 Print Output to Console,1,		--- [-] Should be 0 (don't print results to console) or 1 (print results to console)
 Time steps per year,4,			--- [1/year]
diff --git a/tests/examples/example5.txt b/tests/examples/example5.txt
index ad35dbdf..e64ceb1f 100644
--- a/tests/examples/example5.txt
+++ b/tests/examples/example5.txt
@@ -1,18 +1,12 @@
-----------------------------------------------------------------------------------------
-GEOPHIRES v2.0 Input File
-Geothermal Direct-Use Example Problem using User-Provided Temperature Data (Example 5)
-Created by NREL on 3/26/2018-03-26
-Last modified on 2018-06-12
+# Example 5: Geothermal Direct-Use Example Problem using User-Provided Temperature Data
+# This example problem considers an EGS reservoir at 3 km depth with
+# bottom-hole temperature of 150deg.C. The reservoir output temperature is imported from
+# the text file "ReservoirOutput.txt". Ramey's model is applied to simulate production
+# wellbore heat losses. The heat is used in a direct-use heat application with reinjection
+# temperature of 80deg.C.
 
-Example 5 Description: This example problem considers an EGS reservoir at 3 km depth with
-bottom-hole temperature of 150deg.C. The reservoir output temperature is imported from
-the text file "ReservoirOutput.txt". Ramey's model is applied to simulate production
-wellbore heat losses. The heat is used in a direct-use heat application with reinjection
-temperature of 80deg.C.
-----------------------------------------------------------------------------------------
-
-*** Subsurface technical parameters ***
-****************************************
+# *** Subsurface technical parameters ***
+# ****************************************
 Reservoir Model,5,			--- User provided reservoir output temperature data
 Reservoir Output File Name,Examples/ReservoirOutput.txt,	--- File name with produced temperature
 Reservoir Depth,3, 			--- [km]
@@ -36,8 +30,8 @@ Reservoir Density,2700,			--- [kg/m3]
 Reservoir Thermal Conductivity,3,	--- [W/m/K]
 
 
-*** Surface technical parameters ***
-************************************
+# *** Surface technical parameters ***
+# ************************************
 End-Use Option,2,			--- [-] Direct-Use
 Circulation Pump Efficiency,0.8,	--- [-]
 Utilization Factor,0.9,			--- [-]
@@ -45,8 +39,8 @@ Surface Temperature,15,			--- [deg.C]
 Ambient Temperature,15,			--- [deg.C]
 End-Use Efficiency Factor,0.9,		--- [-]
 
-*** Economic/Financial Parameters ***
-*************************************
+# *** Economic/Financial Parameters ***
+# *************************************
 Plant Lifetime,30,			--- [years]
 Economic Model,3,			--- Should be 1 (FCR model) 2 (Standard LCOE/LCOH model) or 3 (Bicycle model).
 Fraction of Investment in Bonds,0.65,	--- [-] Required if Bicycle model is selected. See manual for details.
@@ -70,6 +64,6 @@ Inflation Rate During Construction,0,	--- [-]
 Electricity Rate,0.07,			--- [$/kWh] for pumping power
 
 
-*** Simulation Parameters ***
+# *** Simulation Parameters ***
 Print Output to Console,1,		--- [-] Should be 0 (don't print results to console) or 1 (print results to console)
 Time steps per year,4,			--- [1/year]
diff --git a/tests/examples/example8.txt b/tests/examples/example8.txt
index beda8bd3..3e1dceaa 100644
--- a/tests/examples/example8.txt
+++ b/tests/examples/example8.txt
@@ -1,11 +1,7 @@
-GEOPHIRES v2.0 Input File
-Created on 2018-06-11
-Last modified on 2018-06-12
-Geothermal Direct-Use Heat using Multiple Parallel Fractures Model (EGS)
-
-Example 8 Description: This problem considers an EGS reservoir at 2.8 km depth for direct-use (Cornell conditions).
-Ramey's model is applied to simulate production wellbore heat losses. The heat
-is used in for direct-use heating with a reinjection temperature of 30deg.C.
+# Example 8: Geothermal Direct-Use Heat using Multiple Parallel Fractures Model (EGS)
+# This problem considers an EGS reservoir at 2.8 km depth for direct-use (Cornell conditions).
+# Ramey's model is applied to simulate production wellbore heat losses. The heat
+# is used in for direct-use heating with a reinjection temperature of 30deg.C.
 
 
 ***Subsurface technical parameters***
diff --git a/tests/examples/example9.txt b/tests/examples/example9.txt
index 4eba7b80..6283ef7d 100644
--- a/tests/examples/example9.txt
+++ b/tests/examples/example9.txt
@@ -1,15 +1,11 @@
-GEOPHIRES v2.0 Input File
-Created on 2018-06-11
-Last modified on 2023-11-20
-Geothermal Direct-Use Heat using Multiple Parallel Fractures Model (EGS)
+# Example 9: Geothermal Direct-Use Heat using Multiple Parallel Fractures Model (EGS)
+# This problem considers an EGS reservoir at 3.5 km depth for ORC electricity production (Cornell conditions).
+# Ramey's model is applied to simulate production wellbore heat losses. The heat
+# is used in for direct-use heating with a reinjection temperature of 60deg.C.
 
-Example 9 Description: This problem considers an EGS reservoir at 3.5 km depth for ORC electricity production (Cornell conditions).
-Ramey's model is applied to simulate production wellbore heat losses. The heat
-is used in for direct-use heating with a reinjection temperature of 60deg.C.
 
-
-***Subsurface technical parameters***
-*************************************
+# ***Subsurface technical parameters***
+# *************************************
 Reservoir Model,1,                        	---Multiple Fractures reservoir model
 Reservoir Depth,3.8,                     	---[km]
 Number of Segments,1,                  		---[-]
@@ -37,8 +33,8 @@ Reservoir Heat Capacity,825,		  	---[J/kg/K]
 Reservoir Density,2730,			  	---[kg/m^3]
 Reservoir Thermal Conductivity,2.83,	  	---[W/m/K]
 
-***SURFACE TECHNICAL PARAMETERS***
-**********************************
+# ***SURFACE TECHNICAL PARAMETERS***
+# **********************************
 End-Use Option,1,			  	---[-] Electricity
 Power Plant Type, 1,				---[-] Subcritical ORC
 Circulation Pump Efficiency,.8,	  		---[-]
@@ -48,15 +44,15 @@ Surface Temperature,20,		  		---[deg.C]
 Ambient Temperature,20,		 		---[deg.C]
 Electricity Rate,0.1,				---Electricity rate for pumping power [$/kWh]
 
-***FINANCIAL PARAMETERS***
-**************************
+# ***FINANCIAL PARAMETERS***
+# **************************
 Plant Lifetime,30,			  	---[years]
 Economic Model,1,			  	---[-] Fixed Charge Rate Model
 Fixed Charge Rate,.05,			 	---[-] between 0 and 1
 Inflation Rate During Construction,0,   	---[-]
 
-***CAPITAL AND O&M COST PARAMETERS***
-*************************************
+# ***CAPITAL AND O&M COST PARAMETERS***
+# *************************************
 Well Drilling and Completion Capital Cost Adjustment Factor,1,	---[-] Use built-in correlations
 Well Drilling Cost Correlation,1,				---[-] Use built-in correlations
 Reservoir Stimulation Capital Cost Adjustment Factor,1,		---[-] Use built-in correlations
@@ -68,8 +64,8 @@ Surface Plant O&M Cost Adjustment Factor,1,			---[-] Use built-in correlations
 Water Cost Adjustment Factor,1,					---[-] Use built-in correlations
 
 
-***Simulation Parameters***
-***************************
+# ***Simulation Parameters***
+# ***************************
 
 Print Output to Console,1,		  			---[-] Should be 0 (don't print results) or 1 (print results)
 Time steps per year,6,		  				---[1/year]
diff --git a/tests/examples/example_ITC.txt b/tests/examples/example_ITC.txt
index c807539c..05e91b25 100644
--- a/tests/examples/example_ITC.txt
+++ b/tests/examples/example_ITC.txt
@@ -1,9 +1,7 @@
---- GEOPHIRES v3 Input File
---- Created on 2024-04-12
---- Investment Tax Credit (ITC) Example
+# Example: Investment Tax Credit (ITC)
 
-***Subsurface technical parameters***
-*************************************
+# ***Subsurface technical parameters***
+# *************************************
 Reservoir Model,1,                        			---Multiple Fractures reservoir model
 Reservoir Depth,5,                     				---[km]
 Number of Segments,1,                  				---[-]
@@ -31,8 +29,8 @@ Reservoir Heat Capacity,1000,		  			---[J/kg/K]
 Reservoir Density,2700,			  			---[kg/m^3]
 Reservoir Thermal Conductivity,2.7,	  			---[W/m/K]
 
-***SURFACE TECHNICAL PARAMETERS***
-**********************************
+# ***SURFACE TECHNICAL PARAMETERS***
+# **********************************
 End-Use Option,1,			  			---[-] Electricity
 Power Plant Type,2,			  			---[-] Supercritical ORC
 Circulation Pump Efficiency,.8,	  				---[-] between .1 and 1
@@ -40,8 +38,8 @@ Utilization Factor,.9,			  			---[-] between .1 and 1
 Surface Temperature,20,		  				---[deg.C]
 Ambient Temperature,20,		 				---[deg.C]
 
-***CAPITAL AND O&M COST PARAMETERS***
-*************************************
+# ***CAPITAL AND O&M COST PARAMETERS***
+# *************************************
 Well Drilling and Completion Capital Cost Adjustment Factor,1,	---[-] Use built-in correlations
 Well Drilling Cost Correlation,1,				---[-] Use built-in correlations
 Reservoir Stimulation Capital Cost Adjustment Factor,1,		---[-] Use built-in correlations
@@ -53,8 +51,8 @@ Surface Plant O&M Cost Adjustment Factor,1,			---[-] Use built-in correlations
 Water Cost Adjustment Factor,1,					---[-] Use built-in correlations
 
 
-*** Economic/Financial Parameters ***
-*************************************
+# *** Economic/Financial Parameters ***
+# *************************************
 Plant Lifetime,30,			--- [years]
 Economic Model,3,			--- Should be 1 (FCR model) 2 (Standard LCOE/LCOH model) or 3 (Bicycle model).
 Fraction of Investment in Bonds,0.65,	--- [-] Required if Bicycle model is selected. See manual for details.
@@ -77,8 +75,8 @@ Water Cost Adjustment Factor,1,					--- [-] Use built-in water cost correlation
 Surface Plant O&M Cost Adjustment Factor,1,			--- [-] Use built-in surface plant O&M cost correlation as is
 Investment Tax Credit Rate,0.5,					--- [-] Investment tax credit rate
 
-***Simulation Parameters***
-***************************
+# ***Simulation Parameters***
+# ***************************
 
 Print Output to Console,1,		  			---[-] Should be 0 (don't print results) or 1 (print results)
 Time steps per year,6,		  				---[1/year]
diff --git a/tests/examples/example_PTC.txt b/tests/examples/example_PTC.txt
index 3e7a3b2c..fb140a12 100644
--- a/tests/examples/example_PTC.txt
+++ b/tests/examples/example_PTC.txt
@@ -1,9 +1,7 @@
---- GEOPHIRES v3 Input File
---- Created on 2024-04-12
---- Production Tax Credit (PTC) Example
+# Example: Production Tax Credit (PTC)
 
-***Subsurface technical parameters***
-*************************************
+# ***Subsurface technical parameters***
+# *************************************
 Reservoir Model,1,                        			---Multiple Fractures reservoir model
 Reservoir Depth,5,                     				---[km]
 Number of Segments,1,                  				---[-]
@@ -31,8 +29,8 @@ Reservoir Heat Capacity,1000,		  			---[J/kg/K]
 Reservoir Density,2700,			  			---[kg/m^3]
 Reservoir Thermal Conductivity,2.7,	  			---[W/m/K]
 
-***SURFACE TECHNICAL PARAMETERS***
-**********************************
+# ***SURFACE TECHNICAL PARAMETERS***
+# **********************************
 End-Use Option,1,			  			---[-] Electricity
 Power Plant Type,2,			  			---[-] Supercritical ORC
 Circulation Pump Efficiency,.8,	  				---[-] between .1 and 1
@@ -40,8 +38,8 @@ Utilization Factor,.9,			  			---[-] between .1 and 1
 Surface Temperature,20,		  				---[deg.C]
 Ambient Temperature,20,		 				---[deg.C]
 
-***CAPITAL AND O&M COST PARAMETERS***
-*************************************
+# ***CAPITAL AND O&M COST PARAMETERS***
+# *************************************
 Well Drilling and Completion Capital Cost Adjustment Factor,1,	---[-] Use built-in correlations
 Well Drilling Cost Correlation,1,				---[-] Use built-in correlations
 Reservoir Stimulation Capital Cost Adjustment Factor,1,		---[-] Use built-in correlations
@@ -53,8 +51,8 @@ Surface Plant O&M Cost Adjustment Factor,1,			---[-] Use built-in correlations
 Water Cost Adjustment Factor,1,					---[-] Use built-in correlations
 
 
-*** Economic/Financial Parameters ***
-*************************************
+# *** Economic/Financial Parameters ***
+# *************************************
 Plant Lifetime,30,			--- [years]
 Economic Model,3,			--- Should be 1 (FCR model) 2 (Standard LCOE/LCOH model) or 3 (Bicycle model).
 Fraction of Investment in Bonds,0.65,	--- [-] Required if Bicycle model is selected. See manual for details.
@@ -81,8 +79,8 @@ Production Tax Credit Cooling, 0.05,				--- [-] Production tax credit for electr
 Production Tax Credit Duration, 10,				--- [-] Production tax credit for duration in years
 Production Tax Credit Inflation Adjusted, True,				--- [-] Is the Production tax credit inflation adjusted (T/F)
 
-***Simulation Parameters***
-***************************
+# ***Simulation Parameters***
+# ***************************
 
 Print Output to Console,1,		  			---[-] Should be 0 (don't print results) or 1 (print results)
 Time steps per year,6,		  				---[1/year]
diff --git a/tests/examples/example_SHR-1.txt b/tests/examples/example_SHR-1.txt
index 84676c7e..dd6736e3 100644
--- a/tests/examples/example_SHR-1.txt
+++ b/tests/examples/example_SHR-1.txt
@@ -1,4 +1,4 @@
---- Superhot Rock (SHR) Example 1
+# Example: Superhot Rock (SHR) 1
 
 Reservoir Model, 1
 Reservoir Depth, 7.5
@@ -46,4 +46,4 @@ Annual License Etc, 0
 Flat License Etc, 0
 Tax Relief Per Year, 2.212
 
---- See relevant discussion regarding thermosiphoning: https://github.com/NREL/GEOPHIRES-X/issues/188?#issuecomment-2102937796
+# See relevant discussion regarding thermosiphoning: https://github.com/NREL/GEOPHIRES-X/issues/188?#issuecomment-2102937796
diff --git a/tests/examples/example_SHR-2.txt b/tests/examples/example_SHR-2.txt
index 5c4ea7b3..77762a9f 100644
--- a/tests/examples/example_SHR-2.txt
+++ b/tests/examples/example_SHR-2.txt
@@ -1,4 +1,4 @@
---- Superhot Rock (SHR) Example 2
+# Example: Superhot Rock (SHR) 2
 
 Reservoir Model, 1
 Reservoir Depth, 7.5
diff --git a/tests/examples/example_multiple_gradients.txt b/tests/examples/example_multiple_gradients.txt
index bc9ad95a..f4feff93 100644
--- a/tests/examples/example_multiple_gradients.txt
+++ b/tests/examples/example_multiple_gradients.txt
@@ -1,9 +1,4 @@
-GEOPHIRES v3.0 Input File
-Created on 2023-11-11
-Last modified on 2023-11-11
-Unit test for multiple geothermal gradients
-
-Description: This problem considers an EGS reservoir at 4km depth with multiple geothermal gradients.
+# Example: Multiple Gradients: This problem considers an EGS reservoir at 4km depth with multiple geothermal gradients.
 
 
 ***Subsurface technical parameters***
diff --git a/tests/examples/example_overpressure.txt b/tests/examples/example_overpressure.txt
index 8c410444..56914025 100644
--- a/tests/examples/example_overpressure.txt
+++ b/tests/examples/example_overpressure.txt
@@ -1,7 +1,7 @@
--- Overpressure Example
+# Example: Overpressure System
 
-***Subsurface technical parameters***
-*************************************
+# ***Subsurface technical parameters***
+# *************************************
 Overpressure Percentage, 155.0
 Overpressure Depletion Rate, 10.0
 Injection Reservoir Temperature, 101.1,      degC
@@ -39,8 +39,8 @@ Reservoir Heat Capacity,1000,		  			---[J/kg/K]
 Reservoir Density,2700,			  			---[kg/m^3]
 Reservoir Thermal Conductivity,2.7,	  			---[W/m/K]
 
-***SURFACE TECHNICAL PARAMETERS***
-**********************************
+# ***SURFACE TECHNICAL PARAMETERS***
+# **********************************
 End-Use Option,1,			  			---[-] Electricity
 Power Plant Type,2,			  			---[-] Supercritical ORC
 Circulation Pump Efficiency,.8,	  				---[-] between .1 and 1
@@ -48,15 +48,15 @@ Utilization Factor,.9,			  			---[-] between .1 and 1
 Surface Temperature,20,		  				---[deg.C]
 Ambient Temperature,20,		 				---[deg.C]
 
-***FINANCIAL PARAMETERS***
-**************************
+# ***FINANCIAL PARAMETERS***
+# **************************
 Plant Lifetime,30,			  			---[years]
 Economic Model,1,			  			---[-] Fixed Charge Rate Model
 Fixed Charge Rate,.05,			 			---[-] between 0 and 1
 Inflation Rate During Construction,0,   			---[-]
 
-***CAPITAL AND O&M COST PARAMETERS***
-*************************************
+# ***CAPITAL AND O&M COST PARAMETERS***
+# *************************************
 Well Drilling and Completion Capital Cost Adjustment Factor,1,	---[-] Use built-in correlations
 Well Drilling Cost Correlation,1,				---[-] Use built-in correlations
 Reservoir Stimulation Capital Cost Adjustment Factor,1,		---[-] Use built-in correlations
@@ -68,8 +68,8 @@ Surface Plant O&M Cost Adjustment Factor,1,			---[-] Use built-in correlations
 Water Cost Adjustment Factor,1,					---[-] Use built-in correlations
 
 
-***Simulation Parameters***
-***************************
+# ***Simulation Parameters***
+# ***************************
 
 Print Output to Console,1,		  			---[-] Should be 0 (don't print results) or 1 (print results)
 Time steps per year,6,		  				---[1/year]
diff --git a/tests/examples/example_overpressure2.txt b/tests/examples/example_overpressure2.txt
index 93c0625a..6f97da40 100644
--- a/tests/examples/example_overpressure2.txt
+++ b/tests/examples/example_overpressure2.txt
@@ -1,7 +1,7 @@
--- Overpressure Example 2
+# Example: Overpressure System 2
 
-***Subsurface technical parameters***
-*************************************
+# ***Subsurface technical parameters***
+# *************************************
 Overpressure Percentage, 155.0
 Overpressure Depletion Rate, 1.0
 Injection Reservoir Temperature, 101.1,      degC
@@ -39,8 +39,8 @@ Reservoir Heat Capacity,1000,		  			---[J/kg/K]
 Reservoir Density,2700,			  			---[kg/m^3]
 Reservoir Thermal Conductivity,2.7,	  			---[W/m/K]
 
-***SURFACE TECHNICAL PARAMETERS***
-**********************************
+# ***SURFACE TECHNICAL PARAMETERS***
+# **********************************
 End-Use Option,1,			  			---[-] Electricity
 Power Plant Type,2,			  			---[-] Supercritical ORC
 Circulation Pump Efficiency,.8,	  				---[-] between .1 and 1
@@ -48,15 +48,15 @@ Utilization Factor,.9,			  			---[-] between .1 and 1
 Surface Temperature,20,		  				---[deg.C]
 Ambient Temperature,20,		 				---[deg.C]
 
-***FINANCIAL PARAMETERS***
-**************************
+# ***FINANCIAL PARAMETERS***
+# **************************
 Plant Lifetime,30,			  			---[years]
 Economic Model,1,			  			---[-] Fixed Charge Rate Model
 Fixed Charge Rate,.05,			 			---[-] between 0 and 1
 Inflation Rate During Construction,0,   			---[-]
 
-***CAPITAL AND O&M COST PARAMETERS***
-*************************************
+# ***CAPITAL AND O&M COST PARAMETERS***
+# *************************************
 Well Drilling and Completion Capital Cost Adjustment Factor,1,	---[-] Use built-in correlations
 Well Drilling Cost Correlation,1,				---[-] Use built-in correlations
 Reservoir Stimulation Capital Cost Adjustment Factor,1,		---[-] Use built-in correlations
@@ -68,8 +68,8 @@ Surface Plant O&M Cost Adjustment Factor,1,			---[-] Use built-in correlations
 Water Cost Adjustment Factor,1,					---[-] Use built-in correlations
 
 
-***Simulation Parameters***
-***************************
+# ***Simulation Parameters***
+# ***************************
 
 Print Output to Console,1,		  			---[-] Should be 0 (don't print results) or 1 (print results)
 Time steps per year,6,		  				---[1/year]