Skip to content

Latest commit

 

History

History
19 lines (14 loc) · 1.04 KB

README.md

File metadata and controls

19 lines (14 loc) · 1.04 KB
Raw

rpihqcam-ansible

An Ansible playbook for provisioning a Raspberry Pi to display the output of a Raspberry Pi HQ Camera Module on boot.

Prerequisites

  • A Raspberry Pi (we used a 4GB Raspberry Pi 4 Model B)
  • A monitor
  • Ansible

Instructions

  1. Write Raspberry Pi OS Lite to SD card
  2. Add an empty file named ssh to the root of the boot partition (see here)
  3. Boot the Raspberry Pi and make sure it's connected to a wired network (you don't have to close the dialog windows, they will be closed by the playbook)
  4. Set the ansible_host variable in hosts to the Raspberry Pi's local IP address (e.g. as seen in the bottom right of the "Welcome to Raspberry Pi" startup wizard)
  5. Run ssh pi@[ip-here] to add the Raspberry Pi to the SSH known hosts
  6. Run ansible-playbook -i hosts setup-role.yml
  7. Reboot the Raspberry Pi