Set RX Band for Sats

[ve1cwj]

Testing out this new change to set the RX band from the satellite info that was added yesterday (2020-12-26) and it works great for the first QSO logged, but then seems to drop the RX band on the next and all subsequent logs added (the field goes blank after saving).

Probably (hopefully) something simple. Thanks for your work on this, Peter!

[magicbug]

It will grab every time a satellites selected or cat interface updates Rx Freq.. what I didn't do was set the field in the session data, I'll add that later pretty sure that's what's missing maybe

[ve1cwj]

Thanks for the quick reply, Peter! Sounds like You’ve nailed it, I wasn’t using CAT and was letting the satellite selection carry over for a few contacts. All of the other satellite info was carried into the 2nd and 3rd entry, but not the RX band.

Certainly no urgency on this, just wanted to make a note while it was fresh in my mind. I hope you’re enjoying the holidays! 73 & all the best to you and yours!

[magicbug]

RX Band is now stored in the session data till the reset button is hit

[ve1cwj]

Worked a pass on AO-92 this morning just to test this change (and my cronjob setup for LOTW). Working great, Peter. The RX band carried through for all QSOs entered. Much appreciated!

And for future reference here or otherwise, should I be putting something like this in the "Issues" section rather than "Discussions"? Still finding my way around Github, so my apologies if I got that wrong!