Skip to content

Latest commit

 

History

History
99 lines (67 loc) · 3.09 KB

SGX1GettingStarted.md

File metadata and controls

99 lines (67 loc) · 3.09 KB
Raw

Getting Started with Open Enclave in SGX1 mode

Platform requirements

  • Ubuntu 16.04-LTS 64-bits
  • SGX1 capable system. Most likely this will be an Intel SkyLake or Intel KabyLake system

Clone Open Enclave SDK repo from GitHub

Use the following command to download the source code.

git clone https://github.com/openenclave/openenclave.git

This creates a source tree under the directory called openenclave.

Install project requirements

First, change directory into the openenclave repository:

cd openenclave

Ansible is required to install the project requirements. If not already installed, you can install it by running:

sudo scripts/ansible/install-ansible.sh

Run the following command from the root of the source tree:

sudo ansible-playbook scripts/ansible/oe-contributors-setup-sgx1.yml

Build

To build first create a build directory ("build/" in the example below) and change into it.

mkdir build/
cd build/

Then run cmake to configure the build and generate the make files and build:

cmake -DUSE_LIBSGX=OFF ..
make

Refer to the Advanced Build Information documentation for further information.

Run unit tests

After building, run all unit test cases using ctest to confirm the SDK is built and working as expected.

Run the following command from the build directory:

ctest

You will see test logs similar to the following:

~/openenclave/build$  ctest

Test project /home/youradminusername/openenclave/build
      Start   1: tests/aesm
1/123 Test   #1: tests/aesm ...............................................................................................................   Passed    0.98 sec
      Start   2: tests/mem
2/123 Test   #2: tests/mem ................................................................................................................   Passed    0.00 sec
      Start   3: tests/str
3/123 Test   #3: tests/str ................................................................................................................   Passed    0.00 sec
....
....
....
122/123 Test #122: tools/oedump .............................................................................................................   Passed    0.00 sec
            Start 123: oeelf
123/123 Test #123: oeelf ....................................................................................................................   Passed    0.00 sec

100% tests passed, 0 tests failed out of 123

Total Test time (real) =  83.61 sec

A clean pass of the above unit tests is an indication that your Open Enclave setup was successful.

You can start playing with the Open Enclave samples after following the instructions in the "Install" section below to configure samples for building,

For more information refer to the Advanced Test Info document.

Install

Follow the instructions in the Install Info document to install the Open Enclave SDK built above.

Build and run samples

To build and run the samples, please look here.