Skip to content

Latest commit

 

History

History
64 lines (43 loc) · 3.29 KB

README.md

File metadata and controls

64 lines (43 loc) · 3.29 KB
Raw

Basic media casting sample

Shows how to use the Windows.Media.Casting namespace to render media on a remote device. Covers sending media to various devices: Miracast, DLNA, and Bluetooth. For more advanced functionality see the Advanced Casting Sample.

Note: This sample is part of a large collection of UWP feature samples. If you are unfamiliar with Git and GitHub, you can download the entire collection as a ZIP file, but be sure to unzip everything to access shared dependencies. For more info on working with the ZIP file, the samples collection, and GitHub, see Get the UWP samples from GitHub. For more samples, see the Samples portal on the Windows Dev Center.

Scenario 1: Basic Media Casting: Press the Load Video button to open a video. Press the Cast button under the progress bar in the video element. Select the device you'd like to cast to.

This is an example of the built in casting that comes with the media element transport controls. This will enable casting to Miracast, DLNA, and Bluetooth devices.

Scenario 2: Casting Using Casting Picker:
Again, press the Load Video Button. Then press the Cast Button to it's right. Finally select the device you'd like to cast to.

Very similar to the first sample, but this one allows you to further customize the device picker.

Scenario 3: Casting Using Custom Picker
Again, press the Load Video Button. Then press the Start Device Watcher. Finally select a device from the list that appears below.

This sample illustrates how to build a completely custom UX for selecting devices. It uses the casting APIs in conjunctions with the Windows.Devices.Enumeration APIs.

Related topics

Windows.Media.Casting namespace
Windows.Devices.Enumeration namespace

System requirements

Client: Windows 10

Phone: Windows 10

Build the sample

  1. If you download the samples ZIP, be sure to unzip the entire archive, not just the folder with the sample you want to build.
  2. Start Microsoft Visual Studio 2015 and select File > Open > Project/Solution.
  3. Starting in the folder where you unzipped the samples, go to the Samples subfolder, then the subfolder for this specific sample, then the subfolder for your preferred language (C++, C#, or JavaScript). Double-click the Visual Studio 2015 Solution (.sln) file.
  4. Press Ctrl+Shift+B, or select Build > Build Solution.

Run the sample

The next steps depend on whether you just want to deploy the sample or you want to both deploy and run it.

Deploying the sample

  1. Select Build > Deploy Solution.

Deploying and running the sample

  1. To debug the sample and then run it, press F5 or select Debug > Start Debugging. To run the sample without debugging, press Ctrl+F5 or selectDebug > Start Without Debugging.