v01.09.01.58-ls25

LinuxServer Changes:

Update Readme with new env vars.

BambuStudio Changes:

This is a major release (V1.9.1 Public Beta 4) that introduces features, improvements, and fixes according to user feedback.

Please note that 3MF files generated by the public beta version of BambuStudio are not compatible for uploading to MakerWorld.

Feature

1. Support Multi-device Management.

We are excited to announce a new feature in our latest release: Multi-device Management. With this feature, you can now send print jobs to multiple printers simultaneously and monitor the printers' status, print history, and task queuing.

When sending a job, you can also choose filament from either the external spool holder or AMS However, if you select AMS, we currently only support one AMS on each printer.

You can configure the task sending procedures by setting up the batch size and interval, which reduce the risk of overloading your power supply. Heating up the hotbeds is when the printers consume the most power. By controlling the batch size and the interval between batches, you can even out the peak power consumption, therefore reducing the risk of overloading. However, please always check your power supply capability when running multiple printers.

Edit printing parameters in the Send window

View task details on the tab page of Multi-Device

For more detailed information about this feature, please click the wiki page. https://wiki.bambulab.com/en/software/bambu-studio/multi-device-management

2. Imported .obj File with Color Function

Added color imported from vertex in obj file, and color imported from mtl file function.
You can use software such as Blender or Meshlab to color vertices or patches of the model.
The PNG color function is currently under development. Please stay tuned.

Note:

1. Please ensure that the imported obj file does not contain non-manifold edges.
2. After color parsing, the results may not fully correspond with other rendering software. Users can continue to manually adjust the printed colors in BambuStudio.

3. New CrossHatch Infill Pattern

We developed a new infill pattern called CrossHatch. As the name suggests, it primarily fills parts with lines, while periodically altering the direction of the lines through some transition layers. It dramatically improves strength compared to line and concentric infill, while achieving high speed and silent printing in most layers.

When compared to Gyroid infill, it prints 28% quicker in a test cube. When compared to Grid infill, it has a smaller grid size at the same density setting. Based on our tests, we recommend printing it with a slightly lower density setting than you normally would, such as 12%.

Improvement

1. Added binding method for pin code

We have added a non LAN mode binding method, which allows for easy binding of printers on the Studio side by inputting the Pin Code generated on the printer side.

P series added support in version 01.06.00.00
A1 mini is supported starting from version 01.03.00.00
A1 is supported starting from version 01.03.00.00
X series is currently not supported

These firmware updates will be released soon.

For more information, please refer to the WIKI page https://wiki.bambulab.com/en/bambu-studio/manual/pin-code

Pin Code obtained on the printer side.

2.Error code pop-up using new UI

We have updated the error code prompts and added illustrations, making the error codes easier to understand. This helps users locate and identify issues more effectively.

3.Optimized PA calibration for P-series and A-series printers

P series and A series printers can support saving calibration results to the printer like X series printers. The calibration results can be edited in Studio's "Manage Result", and the calibrated k value can be set for the AMS slot in device page.

P series added support in version 01.06.00.00
A1 mini is supported starting from version 01.03.00.00
A1 is supported starting from version 01.03.00.00

These firmware updates will be released soon.

4. Added more fonts. This improvement is inspired by PrusaSlicer. Thanks to PrusaSlicer.

5. Added an assembly tool for creating assembly relationships between objects. Currently, face-to-face and point-to-point assemblies have been achieved.

6. Add "filament long retraction when cut" for P1P and P1S. The P series firmware that supports this feature will be released soon.

7. Some translations improvement, Russion by @AndylgTom, Turkish by @fatih5228, Korean by @bluesoul33

8. Add local levelling for A1 series

BugFix

1. Fixed a issue of AMS mapping when printing with gcode.3mf bambulab/BambuStudio#3916
2. Fixed a wrong print sequence issue caused by narrow parts in internal bridge.
   bambulab/BambuStudio#3873
3. Fixed a Linux building issue. bambulab/BambuStudio#3874 , by @lucianoloder

v01.09.01.58-ls24

LinuxServer Changes:

Update Readme with new env vars.

BambuStudio Changes:

This is a major release (V1.9.1 Public Beta 4) that introduces features, improvements, and fixes according to user feedback.

Please note that 3MF files generated by the public beta version of BambuStudio are not compatible for uploading to MakerWorld.

Feature

1. Support Multi-device Management.

We are excited to announce a new feature in our latest release: Multi-device Management. With this feature, you can now send print jobs to multiple printers simultaneously and monitor the printers' status, print history, and task queuing.

When sending a job, you can also choose filament from either the external spool holder or AMS However, if you select AMS, we currently only support one AMS on each printer.

You can configure the task sending procedures by setting up the batch size and interval, which reduce the risk of overloading your power supply. Heating up the hotbeds is when the printers consume the most power. By controlling the batch size and the interval between batches, you can even out the peak power consumption, therefore reducing the risk of overloading. However, please always check your power supply capability when running multiple printers.

Edit printing parameters in the Send window

View task details on the tab page of Multi-Device

For more detailed information about this feature, please click the wiki page. https://wiki.bambulab.com/en/software/bambu-studio/multi-device-management

2. Imported .obj File with Color Function

Added color imported from vertex in obj file, and color imported from mtl file function.
You can use software such as Blender or Meshlab to color vertices or patches of the model.
The PNG color function is currently under development. Please stay tuned.

Note:

1. Please ensure that the imported obj file does not contain non-manifold edges.
2. After color parsing, the results may not fully correspond with other rendering software. Users can continue to manually adjust the printed colors in BambuStudio.

3. New CrossHatch Infill Pattern

We developed a new infill pattern called CrossHatch. As the name suggests, it primarily fills parts with lines, while periodically altering the direction of the lines through some transition layers. It dramatically improves strength compared to line and concentric infill, while achieving high speed and silent printing in most layers.

When compared to Gyroid infill, it prints 28% quicker in a test cube. When compared to Grid infill, it has a smaller grid size at the same density setting. Based on our tests, we recommend printing it with a slightly lower density setting than you normally would, such as 12%.

Improvement

1. Added binding method for pin code

We have added a non LAN mode binding method, which allows for easy binding of printers on the Studio side by inputting the Pin Code generated on the printer side.

P series added support in version 01.06.00.00
A1 mini is supported starting from version 01.03.00.00
A1 is supported starting from version 01.03.00.00
X series is currently not supported

These firmware updates will be released soon.

For more information, please refer to the WIKI page https://wiki.bambulab.com/en/bambu-studio/manual/pin-code

Pin Code obtained on the printer side.

2.Error code pop-up using new UI

We have updated the error code prompts and added illustrations, making the error codes easier to understand. This helps users locate and identify issues more effectively.

3.Optimized PA calibration for P-series and A-series printers

P series and A series printers can support saving calibration results to the printer like X series printers. The calibration results can be edited in Studio's "Manage Result", and the calibrated k value can be set for the AMS slot in device page.

P series added support in version 01.06.00.00
A1 mini is supported starting from version 01.03.00.00
A1 is supported starting from version 01.03.00.00

These firmware updates will be released soon.

4. Added more fonts. This improvement is inspired by PrusaSlicer. Thanks to PrusaSlicer.

5. Added an assembly tool for creating assembly relationships between objects. Currently, face-to-face and point-to-point assemblies have been achieved.

6. Add "filament long retraction when cut" for P1P and P1S. The P series firmware that supports this feature will be released soon.

7. Some translations improvement, Russion by @AndylgTom, Turkish by @fatih5228, Korean by @bluesoul33

8. Add local levelling for A1 series

BugFix

1. Fixed a issue of AMS mapping when printing with gcode.3mf bambulab/BambuStudio#3916
2. Fixed a wrong print sequence issue caused by narrow parts in internal bridge.
   bambulab/BambuStudio#3873
3. Fixed a Linux building issue. bambulab/BambuStudio#3874 , by @lucianoloder

v01.09.01.56-ls24

LinuxServer Changes:

Update Readme with new env vars.

BambuStudio Changes:

This is a major release (V1.9.1 Public Beta 4) that introduces features, improvements, and fixes according to user feedback.

Please note that 3MF files generated by the public beta version of BambuStudio are not compatible for uploading to MakerWorld.

Feature

1. Support Multi-device Management.

We are excited to announce the introduction of a new feature in our latest release: Cloud Printing for Device List. With this feature, you can now send cloud-based print commands to all devices in your device list simultaneously. It provides a convenient and efficient way to manage and control printing tasks across multiple devices.

Key Features:

1. You have the option to choose filament from either the external spool holder or AMS (Application Management Service). If you select AMS, please note that we currently only support a simple mapping.
2. Customizable Sending Settings. You can configure how many machines you want to send to and the sending intervals. Setting up batch size and interval reduce the risk to overload your power supply when multiple printers are heating up their hotbed at the same time.

Edit printing parameters in the Send window

View task details on the tab page of Multi-Device

For more detailed information about this feature, please click the wiki page. https://wiki.bambulab.com/en/software/bambu-studio/multi-device-management

2. Imported .obj File with Color Function

Added color imported from vertex in obj file, and color imported from mtl file function.
You can use software such as Blender or Meshlab to color vertices or patches of the model.
The PNG color function is currently under development. Please stay tuned.

Note:

1. Please ensure that the imported obj file does not have non-manifold edges.
2. After color parsing, it may not fully correspond to other rendering software. Users can continue to manually adjust the printed colors in BambuStudio.

3. New CrossHatch Infill Pattern

We developed a new infill pattern called CrossHatch. As named, it fills the parts with lines mainly, while alters the direction of the lines periodically through some transition layers. It dramatically improves the strength compare to lines and concentric infill while achieving high speed and silent printing in most of the layers.

When compared to Gyroid infill, it prints 28% quicker in a test Cube. When compared to Grid infill, it has a smaller grid size in the same density setting. As tested, we recommend to printed it with a slightly less density setting than you normally do, such as 12%.

Improvement

1. Added binding method for pin code

We have added a non LAN mode binding method, which allows for easy binding of printers on the Studio side by inputting the Pin Code generated on the printer side.

P series added support in version 01.05.04.00
A1 mini is supported starting from version 01.02.0.22
A1 is supported starting from version 01.02.0.23
X series is currently not supported

For more information, please refer to the WIKI page https://wiki.bambulab.com/en/bambu-studio/manual/pin-code

Pin Code obtained on the printer side

2.Error code pop-up using new UI

We have updated the error code prompts and added illustrations, making the error codes easier to understand. This facilitates users in locating and identifying issues.

3.Optimized PA calibration for P-series and A-series printers

P series and A series printers can support saving calibration results to the printer like X series printers. The calibration results can be edited in Studio's "Manage Result", and the calibrated k value can be set for the AMS slot in device page.

4. Load more fonts, the main idea for this improvement is borrowed from PrusaSlicer, thanks to PrusaSlicer.

5. Added an assembly tool for assembling relationships between objects. Currently, face to face assembly and point to point assembly have been achieved.

6. Add "filament long retraction when cut" for P1P and P1S. The P series firmware that supports this feature will be updated soon.

7. Some translations improvement, Russion by @AndylgTom, Turkish by @fatih5228, Korean by @bluesoul33

8. Add local levelling for A1 series

BugFix

1. Fixed the issue of ams mapping when printing with gcode.3mf bambulab/BambuStudio#3916
2. Fixed the wrong print sequence caused by narrow parts of internal bridge
   bambulab/BambuStudio#3873
3. Linux building issue bambulab/BambuStudio#3874 , by @lucianoloder

v01.09.00.70-ls24

LinuxServer Changes:

Update Readme with new env vars.

BambuStudio Changes:

This is a major release (V1.9.0 Public Beta 3) that introduces features, improvements, and fixes according to user feedback.

Please note that 3MF files generated by the public beta version of BambuStudio are not compatible for uploading to MakerWorld.

Improvement

1. Fix the issue of inability to use support filament for AMS mapping.

2. Fix the issue of auto-orient instability due to numerical accuracy. This issue did not exist in version 1.8 and was introduced in version 1.9.

3. Full re-write of spiral vase

Add parameters under the rotating vase, smooth Vase, and check to try the new vase mode. Thanks to @andrewboktor.

Some vase patterns have defects, such as uneven sides and vertical seams. The following are examples of defects.

After enabling smooth Vase, this defect disappears.

Attention: This radical modification is not suitable for vases with obvious edges and has a fallback, which is known. Suitable for vases with smooth surface transitions.

4. Display filament labels in "change filament" context menus, by @javawizard

5. Optimized the issue of continuous memory consumption caused by refreshing the Device Tab in the background.

This optimization is only part of bambulab/BambuStudio#3702

v01.09.00.70-ls23

LinuxServer Changes:

Update Readme with new env vars.

BambuStudio Changes:

This is a major release (V1.9.0 Public Beta 3) that introduces features, improvements, and fixes according to user feedback.

Please note that 3MF files generated by the public beta version of BambuStudio are not compatible for uploading to MakerWorld.

Improvement

1. Fix the issue of inability to use support filament for AMS mapping.

2. Fix the issue of auto-orient instability due to numerical accuracy. This issue did not exist in version 1.8 and was introduced in version 1.9.

3. Full re-write of spiral vase

Add parameters under the rotating vase, smooth Vase, and check to try the new vase mode. Thanks to @andrewboktor.

Some vase patterns have defects, such as uneven sides and vertical seams. The following are examples of defects.

After enabling smooth Vase, this defect disappears.

Attention: This radical modification is not suitable for vases with obvious edges and has a fallback, which is known. Suitable for vases with smooth surface transitions.

4. Display filament labels in "change filament" context menus, by @javawizard

5. Optimized the issue of continuous memory consumption caused by refreshing the Device Tab in the background.

This optimization is only part of bambulab/BambuStudio#3702

v01.09.00.70-ls22

LinuxServer Changes:

Update Readme with new env vars.

BambuStudio Changes:

This is a major release (V1.9.0 Public Beta 3) that introduces features, improvements, and fixes according to user feedback.

Please note that 3MF files generated by the public beta version of BambuStudio are not compatible for uploading to MakerWorld.

Improvement

1. Fix the issue of inability to use support filament for AMS mapping.

2. Fix the issue of auto-orient instability due to numerical accuracy. This issue did not exist in version 1.8 and was introduced in version 1.9.

3. Full re-write of spiral vase

Add parameters under the rotating vase, smooth Vase, and check to try the new vase mode. Thanks to @andrewboktor.

Some vase patterns have defects, such as uneven sides and vertical seams. The following are examples of defects.

After enabling smooth Vase, this defect disappears.

Attention: This radical modification is not suitable for vases with obvious edges and has a fallback, which is known. Suitable for vases with smooth surface transitions.

4. Display filament labels in "change filament" context menus, by @javawizard

5. Optimized the issue of continuous memory consumption caused by refreshing the Device Tab in the background.

This optimization is only part of bambulab/BambuStudio#3702

v01.09.00.69-ls22

LinuxServer Changes:

Update Readme with new env vars.

BambuStudio Changes:

This is a major release (V1.9.0 Public Beta 2) that introduces features, improvements, and fixes according to user feedback.

Please note that 3MF files generated by the public beta version of BambuStudio are not compatible for uploading to MakerWorld.

Feature

1. Reducing purge through retracting filament

Optimization has been carried out based on the beta1 feature. A long retraction is performed before the filament is cut, reducing the filament flushing length. This allows for a reduction in flush volume by approximately 2.4*length mm^3.

Now, it's possible to set parameters for individual filaments. These filament-specific parameters will override the parameters of the extruder. If auto-calculaet flush volume when changing filament is enabled, the system will automatically perform the flush calculation when filament is changed. In other cases, please manually trigger automatic flushing.

At present, only the X1 and X1C support this feature on filament parameters, with Bambu PLA Basic and Bambu PETG Basic being default open. Please ensure you're using the latest printer firmware(01.07.03.00). Other printers will gradually get support for this feature. (Note: Currently X1E and P series support this feature on extruder parameters, while the A series do not support this feature.)

The original idea is from @LeonFisherSkipper

Parameters in extruder

Parameters in filament

Improvement

1. Improved sharp tail support

In version 1.9, BambuSlicer greatly improves the support effect and ease of disassembly of the pointed tail structure, reducing the occurrence of model collapse during printing.

Sharp Tail is a special type of overhang that flies in the air, such as animal tails or human hair. Previously, we supported sharp tails with very tight and dense tree structures, which are difficult to remove. Now we have improved the support structure. Greatly improving the support effect and ease of disassembly of the pointed tail structure. Only a sparse set of contact nodes are added around the sharp tails, and the tree branches are separated far enough so they are easier to remove. Besides, sharp tail overhangs will no longer have support interface layers. For more details, see our wki page.

Test model is hand of superman(https://www.printables.com/model/186499-superman) 3mf file. Compared with PrusaSlicer and OrcaSlicer, BambuStudio can print the model with lower failure possibility while support can be removed easily.

In BambuStudio 1.9 version

In PrusaSlicer (The model is prone to tipping over during the printing process)

In OrcaSlicer (The model is prone to tipping over during the printing process)

2. Precise z height

If checked, the accurate Z height will be obtained after slicing the model.

For example, We slice a 12.3mm×12.3mm×12.3mm square with a layer height of 0.2mm. The final slicing result will be a multiple of 0.2mm (As shown in the first picture, the height after slicing will be 12.4mm). After checking this parameter, we will adjust the layer height of the last 5 layers so that the height of slicing result will be consistent with the actual height of the object. (As shown in the second picture, the height after slicing is 12.3mm which is consistent with the actual height of the object)

Attention: It will not take effect when the number of object layers is less than 6

Precision z height is not checked

Precision z height is checked

3. More importantly, we have added translation, rotation, and measurement tools in the assembly diagram, and added face and face assembly functions in the measurement tools to facilitate the rapid assembly of two objects

4. Multi-material segmentation improvements

We extracted the part about Voronoi diagram detection in Arachne to a public location and applied it to multi-color area segmentation. And we re-implemented the main part of multi-material segmentation and solved all the problems of material segmentation overflow layer. This patch is cherry pick from Prusa, Thanks to PrusaSlicer

5. Add support used filament statistics.

6. Port the new "ensure_vertical_thickness" algorithm from PrusaSlicer. Thanks to @vojtech Bubnik

7. Port the "Extend sparse infill" feature from PrusaSlicer. Thanks to @Godrak

8. Add Bambu ABS-GF,Bambu ASA-Aero,Bambu Support for PLA/PETG

9. Add Turkish Support. Thanks to @fatih5228 for all the translations

10. Refine Ukrainian translation from @iZonex

11. Adapt and enhance the 3DHoneyComb infill from OrcaSlicer, credited to @gringer (David Eccles) for the initial 3DHoneyComb implementation in Slic3r. Moreover, we further implement the infill angle options, allowing for adjustments to the infill angle with this infill type.

BugFix

1. Can't edit text bambulab/BambuStudio#3750
2. Slicer creates invalid color pattern bambulab/BambuStudio#3749
3. Fix the building issues on flathub, by @hadess

v01.09.00.60-ls21

LinuxServer Changes:

Update Readme with new env vars.

BambuStudio Changes:

This is a major release (V1.9.0 Public Beta) that introduces features, improvements, and fixes according to user feedback.

Please note that 3MF files generated by the public beta version of BambuStudio are not compatible for uploading to MakerWorld.

Feature

1. Natively integrate MakerWorld

We have integrated MakerWorld in Bambu Studio to provide seamless experience for you to share, search, and slice 3D models.

• The homepage layout has been redesigned to display more contents.
• A link button to MakerLab has been added in the homepage so you can click and navigate to the web page.
• And now we support displaying and searching models, and importing 3D models directly in Bambu Studio.

2. Support for customize print sequences beyond the first layer

Please see this wiki page for detail.

3. Improved Scarf Seam

Scarf Seam is a useful technique to hide seams for objects with few corners, where the seam joint is not a single point as the usual seam, but a short slope. Scarf seam was firstly introduced in Orca Slicer by Noisyfox https://github.com/Noisyfox and fellow community contributors for their involvement and discussions, and we deeply appreciate their great contributions. We have imported and further improved Scarf Seam.

1. Drawing upon community contributions, Bambu Lab strives to refine seam quality for users within established parameters. This approach aims to enable users to achieve enhanced seam outcomes without adjusting line width or reducing print speed. The comparison is shown as follows:

2. Additionally, Bambu Lab adds the scarf seam overhang detection for conditional joints. When enabled, the scarf seams are not utilized if the overhang exceeds a certain threshold. This addresses the issue where the scarf seam becomes less effective and fails in cases of excessive overhang.

Please note: it is an experiment function and is turned off by default. Please use it with caution. The function entrance shows the figure below.

4. Reducing purge through retracting filament

Experimental feature in development mode, currently exclusive to the X and P series and disabled by default. This function prolongs the retraction and cutting distance of the filament during changes, aiming to reduce purging. While it significantly decreases flushing, it may elevate the risk of nozzle clogs or other printing complications. Please use it with caution, thanks to @LeonFisherSkipper.

5. Improve PA calibration pattern

Improve PA calibration pattern. All calibration lines are now printed on a single base plate, facilitating the model's disassembly. courtesy of OrcaSlicer, thanks to @SoftFever.

6. Users can now input their own calibration values

Following user feedback, Bambu Studio has introduced a feature allowing users to directly input and save their specific calibration values on the printer, facilitating the customization of device settings. This update is designed to enhance the overall user experience.

7. Straight line painting (horizontal & vertical) and view enhancement

Introduced a tool for drawing straight lines (vertical and horizontal) in painting, plus a default front view and horizontal rotation feature, courtesy of OrcaSlicer, thanks to @SoftFever.

8. Ported and improved measurement tool

Initially created by the PrusaSlicer team and favored by numerous users, the 'Measure' feature has been adapted for Bambu Studio, with acknowledgments to both OrcaSlicer and PrusaSlicer.
We've enhanced this feature by introducing modifications that enable measurement across multiple model objects, significantly elevating its functionality.

Moreover, we've enabled setting distances between different meshes, allowing for assembly functions akin to CAD, facilitating precise distance-based assembly.

9. Enabled Spiral Vase Mode in per-plate settings.

bambulab/BambuStudio#2079
The new per-plated 'Spiral Vase' option is added under the Plate Settings tab. With this setting, model airplane parts designated for printing in spiral vase mode can now be sliced together with standard parts as long as they are in different plates.

10. Added a new option "Support/object first layer gap"

Previously, the distance between the first layer of supports and objects was determined by the brim gap, a setting that could complicate support removal in some instances. Now, this gap can be adjusted independently, with a default value of 0.2mm that generally performs well on Textured PEI plates. Adjustments may be necessary for other types of plates.

Improvement

1. Smooth overhang speed

This update enhances the overhang descent speed feature for smoother transitions between speeds, thus improving the appearance of speed-transition defects. This improvement is accessible in Classic mode. The following image illustrates the effect of the smooth overhang descent speed (cooling function was turned off to showcase the overhang speed transition).

A. The overhang descent speed is smoother, and the quality of speed-dependent patterns has been improved. The test model is from wuguigui https://makerworld.com/zh/@wuguigui on MakerWorld https://makerworld.com/zh/models/12888#profileId-13005
As shown in the left image, the areas with significant speed changes have transitions (red arrows), while areas with drastic path changes do not have transitions (yellow arrows). And the printing result, as shown in the right image, demonstrates surface improvement.

B. Additionally, the arc fitting result is preserved. Both the speed transition and non-speed transition parts retain arc fitting. The bottom-left image shows arc fitting in the speed transition part, and the bottom-right image shows arc fitting in the non-speed transition part.

2. due to the improved calculation method for overhangs, there has been an improvement in fly-wall path caused by overhang calculations. The bottom-left image shows the situation before the improvement, while the bottom-right image shows the situation after the improvement.

3. Tooltips have been added to all gizmo tools, offering straightforward instructions for use.

4. Added Plates Stats Total Cost, thanks @niklasb22.

5. Show estimated print time in the ruler, thanks @Noisyfox

6. Display both layer time and tick information when a tick is selected from the gcode progress bar, thanks @Noisyfox

7. Support remote batch file management on the machine.

8. Optimized performance and reduced lag when switching between parameter pages.

9. Optimized error descriptions and resolution methods for Liveview and file browsing.

10. Enhanced application b...

v01.09.00.60-ls20

LinuxServer Changes:

Update Readme with new env vars.

BambuStudio Changes:

This is a major release (V1.9.0 Public Beta) that introduces features, improvements, and fixes according to user feedback.

Please note that 3MF files generated by the public beta version of BambuStudio are not compatible for uploading to MakerWorld.

Feature

1. Natively integrate MakerWorld

We have integrated MakerWorld in Bambu Studio to provide seamless experience for you to share, search, and slice 3D models.

• The homepage layout has been redesigned to display more contents.
• A link button to MakerLab has been added in the homepage so you can click and navigate to the web page.
• And now we support displaying and searching models, and importing 3D models directly in Bambu Studio.

2. Support for customize print sequences beyond the first layer

Please see this wiki page for detail.

3. Improved Scarf Seam

Scarf Seam is a useful technique to hide seams for objects with few corners, where the seam joint is not a single point as the usual seam, but a short slope. Scarf seam was firstly introduced in Orca Slicer by Noisyfox https://github.com/Noisyfox and fellow community contributors for their involvement and discussions, and we deeply appreciate their great contributions. We have imported and further improved Scarf Seam.

1. Drawing upon community contributions, Bambu Lab strives to refine seam quality for users within established parameters. This approach aims to enable users to achieve enhanced seam outcomes without adjusting line width or reducing print speed. The comparison is shown as follows:

2. Additionally, Bambu Lab adds the scarf seam overhang detection for conditional joints. When enabled, the scarf seams are not utilized if the overhang exceeds a certain threshold. This addresses the issue where the scarf seam becomes less effective and fails in cases of excessive overhang.

Please note: it is an experiment function and is turned off by default. Please use it with caution. The function entrance shows the figure below.

4. Reducing purge through retracting filament

Experimental feature in development mode, currently exclusive to the X and P series and disabled by default. This function prolongs the retraction and cutting distance of the filament during changes, aiming to reduce purging. While it significantly decreases flushing, it may elevate the risk of nozzle clogs or other printing complications. Please use it with caution, thanks to @LeonFisherSkipper.

5. Improve PA calibration pattern

Improve PA calibration pattern. All calibration lines are now printed on a single base plate, facilitating the model's disassembly. courtesy of OrcaSlicer, thanks to @SoftFever.

6. Users can now input their own calibration values

Following user feedback, Bambu Studio has introduced a feature allowing users to directly input and save their specific calibration values on the printer, facilitating the customization of device settings. This update is designed to enhance the overall user experience.

7. Straight line painting (horizontal & vertical) and view enhancement

Introduced a tool for drawing straight lines (vertical and horizontal) in painting, plus a default front view and horizontal rotation feature, courtesy of OrcaSlicer, thanks to @SoftFever.

8. Ported and improved measurement tool

Initially created by the PrusaSlicer team and favored by numerous users, the 'Measure' feature has been adapted for Bambu Studio, with acknowledgments to both OrcaSlicer and PrusaSlicer.
We've enhanced this feature by introducing modifications that enable measurement across multiple model objects, significantly elevating its functionality.

Moreover, we've enabled setting distances between different meshes, allowing for assembly functions akin to CAD, facilitating precise distance-based assembly.

9. Enabled Spiral Vase Mode in per-plate settings.

bambulab/BambuStudio#2079
The new per-plated 'Spiral Vase' option is added under the Plate Settings tab. With this setting, model airplane parts designated for printing in spiral vase mode can now be sliced together with standard parts as long as they are in different plates.

10. Added a new option "Support/object first layer gap"

Previously, the distance between the first layer of supports and objects was determined by the brim gap, a setting that could complicate support removal in some instances. Now, this gap can be adjusted independently, with a default value of 0.2mm that generally performs well on Textured PEI plates. Adjustments may be necessary for other types of plates.

Improvement

1. Smooth overhang speed

This update enhances the overhang descent speed feature for smoother transitions between speeds, thus improving the appearance of speed-transition defects. This improvement is accessible in Classic mode. The following image illustrates the effect of the smooth overhang descent speed (cooling function was turned off to showcase the overhang speed transition).

A. The overhang descent speed is smoother, and the quality of speed-dependent patterns has been improved. The test model is from wuguigui https://makerworld.com/zh/@wuguigui on MakerWorld https://makerworld.com/zh/models/12888#profileId-13005
As shown in the left image, the areas with significant speed changes have transitions (red arrows), while areas with drastic path changes do not have transitions (yellow arrows). And the printing result, as shown in the right image, demonstrates surface improvement.

B. Additionally, the arc fitting result is preserved. Both the speed transition and non-speed transition parts retain arc fitting. The bottom-left image shows arc fitting in the speed transition part, and the bottom-right image shows arc fitting in the non-speed transition part.

2. due to the improved calculation method for overhangs, there has been an improvement in fly-wall path caused by overhang calculations. The bottom-left image shows the situation before the improvement, while the bottom-right image shows the situation after the improvement.

3. Tooltips have been added to all gizmo tools, offering straightforward instructions for use.

4. Added Plates Stats Total Cost, thanks @niklasb22.

5. Show estimated print time in the ruler, thanks @Noisyfox

6. Display both layer time and tick information when a tick is selected from the gcode progress bar, thanks @Noisyfox

7. Support remote batch file management on the machine.

8. Optimized performance and reduced lag when switching between parameter pages.

9. Optimized error descriptions and resolution methods for Liveview and file browsing.

10. Enhanced application b...

v01.08.04.51-ls19

LinuxServer Changes:

Update Readme with new env vars.

BambuStudio Changes:

This is the second public official release of Bambu Studio v1.8

Please see the release logs of 1.8.3 for the complete list of changes with respect to 1.8.2.

Feature

1. Linux Flatpak support

Support linux flatpak image， Now Linux users can also download BambuStudio's linux flatpat image from flatpak github
This function is developed by @hadess, great thanks to @hadess

Improvement

1. improved log anonymity for enhanced privacy protection
2. A series supports plate position detection function(The firmware needs to be upgraded to version 01.02.00.00.)
3. Chinese and French translations @leoleoasd and @dorianboulch

Bugfix

1. Fix crash when comparing profiles
2. Fix trying to save a printer nozzle profile as user preset crash-freezes the program bambulab/BambuStudio#3335
3. Fix "Open in BambuStudio" button on MakerWorld, Thanks for @hadess bambulab/BambuStudio#3314