Home
The Yamaha FZ-10/MT-10 and MT-10 SP is a bloody good bike.
There are however certain areas of the bike that can be improved either by a bit of manual labour or simply replacing parts from other bikes.
This repo will try to highlight what the community has done to their bikes.
It is possible to replace the master cylinder and lever from an R1/R1M 2015.
The standard MT-10 needs a new mirror fitting because the mirror is fitted to the reservoir itself.
The MT-10 SP has a different reservoir with no mirror attachment, as the attachment is fitted to the bracket.
Notice difference in part 11 below.
MT-10
MT-10 SP
You will need a way to fit a brake fluid reservoir. Some use Brembo kits, some use different methods.
This fine piece of kit fits the bike brilliantly. However there needs to be done work for the brake switch/cruise control.
MT-10 owners can upgrade to R1/R1M calipers directly.
MT-10 SP owners would look at Brembos. But it looks like Brembos would need spacers/different brake discs.
At least one member on Facebook has fitted Brembo GP4 RS calipers.
The standard outlet is quite shoddy on keeping adapters in place because of the horizontal placement.
Author of repo fitted an elastic band around the assembly by loosening a screw.
Other bike owners have fitted dedicated USB outputs, some even show voltage.
- To be listed
Neither the author of this repo, nor the rest of it's contributors takes any responsibility for anything.