getting-started-guides.md

Board-specific getting started guides

After you complete the First steps, see your board's guide for board-specific instructions on getting started with FreeRTOS:

• Getting started with the Cypress CYW943907AEVAL1F Development Kit
• Getting started with the Cypress CYW954907AEVAL1F Development Kit
• Getting started with the Cypress CY8CKIT-064S0S2-4343W kit
• Getting started with the Infineon XMC4800 IoT Connectivity Kit
• Getting started with the MW32x AWS IoT Starter Kit
• Getting started with the MediaTek MT7697Hx development kit
• Getting started with the Microchip Curiosity PIC32MZ EF
• Getting started with the Nuvoton NuMaker-IoT-M487
• Getting started with the NXP LPC54018 IoT Module
• Getting started with the Renesas Starter Kit+ for RX65N-2MB
• Getting started with the STMicroelectronics STM32L4 Discovery Kit IoT Node
• Getting started with the Texas Instruments CC3220SF-LAUNCHXL
• Getting started with the Windows Device Simulator
• Getting started with the Xilinx Avnet MicroZed Industrial IoT Kit

Note
You do not need to complete the First steps for the following self-contained Getting Started with FreeRTOS guides:
Getting started with the Microchip ATECC608A Secure Element with Windows simulator Getting started with the Espressif ESP32-DevKitC and the ESP-WROVER-KIT Getting started with the Espressif ESP32-WROOM-32SE Getting started with the Espressif ESP32-S2 Getting started with the Infineon OPTIGA Trust X and XMC4800 IoT Connectivity Kit Getting started with the Nordic nRF52840-DK