Tzerra Data missing

[AndreTzerra]

Hello,

Until last week I used RJblakes Domotics version to connect to my TZerra Boiler.
After the raspberry 3b died, i decided to us a ESP board to connect to my boiler.

It works but I missing some STATE data from my Tzerra boiler:
CH
Ignition
Gas Valve
Ionisation
Pump
DHW

How to get these data collected?

When I connect my Remeha-Service-tool I see the next data (In dutch)

[J-G-H-selvas]

Hi Andre,

I've also got a Remeha Tzerra.. Specifically an Remeha Tzerra M 28c Plus CCS
I've put a Wemos D1 mini inside, with the RJ11 cable soldered to it, and I'm running ESPHome via HomeAssistant.

I've managed to get the dietrich.h file in the right directory ( installed Samba on HomeAssistant, and uploaded the file to \config\esphome ) and I got the YAML code installed.

Now, the logs are filled with CRC errors..

[10:28:41][D][custom:209]: crc error
[10:28:41][D][custom:213]: sample data: 7074696D65000000A0FEFF3F000000000000000048412F73656E736F722F0000B8FEFF3F0000000000454D4548412F73656E736F722F0000D0FEFF3F06000000F161104041AF45010000000000000000
[10:28:41][W][component:238]: Components should block for at most 30 ms.

I'm only getting some data about the time the ESP itself is up and connected to the Wifi, but no readable data from my Tzerra. It seems that the sample data is way longer in characters than is to be expected? I'm just don't understand what adaptions I should make to either the dietrich.h file or the YAML code.

You got a Tzerra? You used to get all data? Or just some? I don't have the Remeha-service tool or domotics,..

[AndreTzerra]

I use the next dietrich.h:

But as stated above, i don't get all the values.

https://www.dropbox.com/scl/fi/0e73i1qkco19hsbu9vo1t/dietrich.zip?rlkey=9dd4w7cus62feeepy8iwoov37&st=deeu3vlo&dl=0