BPNVG V2 by Stubbs
The original BPNVG-project by Stubbs was inteded to be build as a panoramic version but adaptations like binoculars have been made too.
Panos:
Binos: // to be added
This is the BPNVG-assembly.
You need the following components for one "unit":
- 2 Sensor Mounts
- 2 Camera Spacers
- 2 Adapter mounts if running something different than a Runcam Night Eagle 2
- 2 of your selected sensors
- 2 Displays
- 2 internal board mounts
- 2 display mounts
- 1 binary housing
- 2 bi-convex lenses dia = 38 mm, f = 50 mm
- 10 thread inserts M4 recommended
- 10 ISO 7380 M4x10
.
All printed components can be printed according to own requirements