diff --git a/CanonSDKTutorial-noexe/WinFormsUI/MainForm.cs b/CanonSDKTutorial-noexe/WinFormsUI/MainForm.cs index 3595998..794e996 100644 --- a/CanonSDKTutorial-noexe/WinFormsUI/MainForm.cs +++ b/CanonSDKTutorial-noexe/WinFormsUI/MainForm.cs @@ -18,7 +18,7 @@ public partial class MainForm : Form List ISOList; List CamList; Bitmap Evf_Bmp; - int LVBw, LVBh, w, h, imageID = 100 * 1070000; + int LVBw, LVBh, w, h, imageID = 100 * 1080000; DateTime lastImageTime = DateTime.Now; float LVBratio, LVration; Images images = new Images(); diff --git a/CoinSorter/Coin.vb b/CoinSorter/Coin.vb index 7f6ee1e..9ebe177 100644 --- a/CoinSorter/Coin.vb +++ b/CoinSorter/Coin.vb @@ -119,7 +119,7 @@ Public Class Coin 'If Coins(coinID).Type = "tails" And Coins(coinID).TypeStrength > 80 Then 'Sort out Lincoln memorials: - If Coins(coinID).Type = "tails" Then + If Coins(coinID).Type = "1982D" Or Coins(coinID).Type = "1982P" Then PowerSupply.ToggleSolenoid(Coins(coinID).CaptureTime, Coins(coinID).HorizontalCenter) End If End Using diff --git a/CoinSorter/CoinTracker.vb b/CoinSorter/CoinTracker.vb index 15e6f1e..2ac01ec 100644 --- a/CoinSorter/CoinTracker.vb +++ b/CoinSorter/CoinTracker.vb @@ -10,7 +10,7 @@ Module CoinTracker Public MsCoinsAreInView As Double = 10000 Public ImageWidth As Int32 = 960 Public DigitsIPAddress As String = "54.144.148.83" - Public DigitsJobID As String = "20150818-221113-b8aa" '5 Types AlexNet 256x256 + Public DigitsJobID As String = "20150820-222359-cd38" Public CurrentDirectory As String = "C:\Temp\TempCoinImages\" Public ArchivedDirectory As String = "F:\liveview\" diff --git a/hardware/conveyors/1.jpg b/hardware/conveyors/1.jpg new file mode 100644 index 0000000..6d169f6 Binary files /dev/null and b/hardware/conveyors/1.jpg differ diff --git a/hardware/conveyors/2.jpg b/hardware/conveyors/2.jpg new file mode 100644 index 0000000..5fe4c29 Binary files /dev/null and b/hardware/conveyors/2.jpg differ diff --git a/hardware/conveyors/25mmMotor.3dm b/hardware/conveyors/25mmMotor.3dm new file mode 100644 index 0000000..4f0abb2 Binary files /dev/null and b/hardware/conveyors/25mmMotor.3dm differ diff --git a/hardware/conveyors/3.jpg b/hardware/conveyors/3.jpg new file mode 100644 index 0000000..763eb7f Binary files /dev/null and b/hardware/conveyors/3.jpg differ diff --git a/hardware/conveyors/4.jpg b/hardware/conveyors/4.jpg new file mode 100644 index 0000000..e7af55c Binary files /dev/null and b/hardware/conveyors/4.jpg differ diff --git a/hardware/conveyors/5.jpg b/hardware/conveyors/5.jpg new file mode 100644 index 0000000..58644d5 Binary files /dev/null and b/hardware/conveyors/5.jpg differ diff --git a/hardware/conveyors/Conveyors.md b/hardware/conveyors/Conveyors.md new file mode 100644 index 0000000..c134f8f --- /dev/null +++ b/hardware/conveyors/Conveyors.md @@ -0,0 +1,46 @@ +Three type of conveyor ends have been used successfully: +Motor end in Ύ” MDF +Pulley end in Ύ MDF +Pulley end in Ό MDF + +These pulleys built from Ύ” frames have turned out way better than I thought they would. I first used 1mm thick belting at 100RP; this was a bit under powered. All the power is used to move the thick belts. It would move a full gallon of milk with no issues. + +With the 0.15mm thick belting that is currently be used the motors can be smaller, especially if you put in ball bearings. + +Motor end in Ύ” MDF Parts: +25MM Gear motor, 4mm shaft 100-1000RPM +2 motor mount screws: M3-0.5 6 mm screws +3D printed gearbox bracket +3D printed D-coupling to take motor 4mm ID “D” to Ό” OD +Coupling: Polyurethane Tubing, ½” OD, Ό” ID. +Coupling: Zip/cable Ties: 4” +75mm long Ό” steel shaft +35 mm long 3D printed pulley. 22mm diameter. +Drilled with “D”0.246” drill to press fit on Ό” shaft +2 3D printed Pulley Holders. +2 Bushings: stock nylon shoulder spacers ½” Long, Ό” ID, 5/16” ID, ½” ID Flange +3 8” zip/cable ties hold on the gearbox bracket & pulley holders + +Pulley end in Ύ MDF +Same as motor side, except 60mm long shaft. + + +Pulley end in Ό” MDF: +Pulley end Ό” is 60mm wide +1/8” steel shaft, 60mm long +4 Ό” diameter nylon spacers, 1/8” hole, ½” long, Center spacer has tape to make it crown. +Wood is cutout for the pulleys +Remaining wood is drilled 1/8” +It’s pretty crude and fragile, but once it starts working I have yet to see fail. +It’s easy to drill so the shaft is not straight. Then the belt walks to one side. + +Conveyor Belt: +30mm wide, 0.15mm thick Polyurethane +Normally used for sealing fabric together, under garment strapping, etc. +Sold as “TPU Tape” on Aliexpress.com +Length wise sized 5% under +Bonded together with a standard impulse heat sealer used for sealing poly plastic bags. + + +Speed Controllers: +The first proof of concept had 24V power stepped down to 5 to 18 volts for the 12V motors with DC-DC LM2596 modules. This are really common, $1-2 on eBay, Amazon, etc. The system moving coins with motors running at 5-7 volts is surprisingly quiet with the coin hopper turned off. diff --git a/hardware/conveyors/D-Bushing.3dm b/hardware/conveyors/D-Bushing.3dm new file mode 100644 index 0000000..c7cf591 Binary files /dev/null and b/hardware/conveyors/D-Bushing.3dm differ diff --git a/hardware/conveyors/GearboxBracket3.3dm b/hardware/conveyors/GearboxBracket3.3dm new file mode 100644 index 0000000..b432062 Binary files /dev/null and b/hardware/conveyors/GearboxBracket3.3dm differ diff --git a/hardware/conveyors/Pulley.3dm b/hardware/conveyors/Pulley.3dm new file mode 100644 index 0000000..4f768dd Binary files /dev/null and b/hardware/conveyors/Pulley.3dm differ diff --git a/hardware/conveyors/ShaftHolder.3dm b/hardware/conveyors/ShaftHolder.3dm new file mode 100644 index 0000000..2ef5cab Binary files /dev/null and b/hardware/conveyors/ShaftHolder.3dm differ