Battery state of charge

[eismarkt]

I am missing the battery state of charge from the hybrid inverter Sph 10000 Bh up.
Where can I find it

[johanmeijer]

Can you see which layout is beeing used (eg T060104XSPF or T050104XSPF)?

[eismarkt]

i think both inverters are using the same T06NNNNX

• Possible Inverter serial RCL1*****

  • Inverter serial not recognised - using inverter type default
  • Growatt new layout processing
    • decrypt : True
    • offset : 6
    • record layout : T06NNNNX
  • Grott data record date/time processing started
  • no or no valid time/date found, grott server time will be used (buffer records not sent!)
  • Grott values retrieved:
    • datalogserial : KWK1C****
    • pvserial : RCL1C****
    • pvstatus : 1
    • pvpowerin : 369.7
    • pv1voltage : 288.0
    • pv1current : 1.1
    • pv1watt : 369.6
    • pv2voltage : 4.2
    • pv2current : 0.0
    • pv2watt : 0.1
    • pvpowerout : 362.5
    • pvfrequentie : 50.0
    • pvgridvoltage : 233.4
    • pvgridcurrent : 1.5
    • pvgridpower : 363.7
    • pvgridvoltage2 : 0.0
    • pvgridcurrent2 : 0.0
    • pvgridpower2 : 0.0
    • pvgridvoltage3 : 0.0
    • pvgridcurrent3 : 0.0
    • pvgridpower3 : 0.0
    • totworktime : 346.1
    • pvenergytoday : 2.4
    • pvenergytotal : 95.4
    • epvtotal : 97.3
    • epv1today : 2.5
    • epv1total : 97.3
    • epv2today : 0.0
    • epv2total : 0.0
    • pvtemperature : 18.3
    • pvipmtemperature : 25.1
  • MQTT jsonmsg:
    {"device": "RCL1CHC0CM", "time": "2023-02-19T14:21:57", "buffered": "no",
    "values": {"datalogserial": "KWK1CH20C5", "pvserial": "RCL1CHC0CM",
    "pvstatus": 1, "pvpowerin": 3697, "pv1voltage": 2880, "pv1current": 11,
    "pv1watt": 3696, "pv2voltage": 42, "pv2current": 0, "pv2watt": 1,
    "pvpowerout": 3625, "pvfrequentie": 4998, "pvgridvoltage": 2334,
    "pvgridcurrent": 15, "pvgridpower": 3637, "pvgridvoltage2": 0,
    "pvgridcurrent2": 0, "pvgridpower2": 0, "pvgridvoltage3": 0,
    "pvgridcurrent3": 0, "pvgridpower3": 0, "totworktime": 2491597,
    "pvenergytoday": 24, "pvenergytotal": 954, "epvtotal": 973, "epv1today": 25,
    "epv1total": 973, "epv2today": 0, "epv2total": 0, "pvtemperature": 183,
    "pvipmtemperature": 251}}
  • Grott MQTT topic used : energy/growatt
  • MQTT send failed: [Errno 99] Address not available
  • Grott Send data to PVOutput disabled
  • Grott Send data to Influx disabled
  • Grott extension processing started : grott_ha
    Grott HA 0.0.7-rc5 - creating RCL1CHC0CM config in HA, 32 to push
    Pushing 33 configurations payload to HA
    Configurations pushed
  • Grott extension processing ended : 0
  • Growatt packet received:
    <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('172.30.33.4', 5279), raddr=('192.168.3.142', 1039)>
  • Data less then minimum record length, data not processed

• Possible Inverter serial TPJ4****

  • Inverter serial not recognised - using inverter type default
  • Growatt new layout processing
    • decrypt : True
    • offset : 6
    • record layout : T06NNNNX
  • Grott data record date/time processing started
  • no or no valid time/date found, grott server time will be used (buffer records not sent!)
  • Grott values retrieved:
    • datalogserial : KWK1*****
    • pvserial : TPJ*****
    • pvstatus : 5
    • pvpowerin : 1010.0
    • pv1voltage : 597.8
    • pv1current : 1.1
    • pv1watt : 668.8
    • pv2voltage : 275.7
    • pv2current : 1.2
    • pv2watt : 348.4
    • pvpowerout : 0.0
    • pvfrequentie : 0.0
    • pvgridvoltage : 0.0
    • pvgridcurrent : 0.0
    • pvgridpower : 0.0
    • pvgridvoltage2 : 0.0
    • pvgridcurrent2 : 0.0
    • pvgridpower2 : 0.0
    • pvgridvoltage3 : 0.0
    • pvgridcurrent3 : 0.0
    • pvgridpower3 : 5892186.1
    • totworktime : 54.6
    • pvenergytoday : 0.0
    • pvenergytotal : 0.0
    • epvtotal : 2.0
    • epv1today : 663.5
    • epv1total : 1417597.5
    • epv2today : 5.4
    • epv2total : 337.4
    • pvtemperature : 32.3
    • pvipmtemperature : 215.6
  • MQTT jsonmsg:
    {"device": "TPJ4CEJ07G", "time": "2023-02-19T14:22:02", "buffered": "no",
    "values": {"datalogserial": "KWK1CH20C5", "pvserial": "TPJ4CEJ07G",
    "pvstatus": 5, "pvpowerin": 10100, "pv1voltage": 5978, "pv1current": 11,
    "pv1watt": 6688, "pv2voltage": 2757, "pv2current": 12, "pv2watt": 3484,
    "pvpowerout": 0, "pvfrequentie": 0, "pvgridvoltage": 0, "pvgridcurrent": 0,
    "pvgridpower": 0, "pvgridvoltage2": 0, "pvgridcurrent2": 0, "pvgridpower2":
    0, "pvgridvoltage3": 0, "pvgridcurrent3": 0, "pvgridpower3": 58921861,
    "totworktime": 393216, "pvenergytoday": 0, "pvenergytotal": 0, "epvtotal":
    20, "epv1today": 6635, "epv1total": 14175975, "epv2today": 54, "epv2total":
    3374, "pvtemperature": 323, "pvipmtemperature": 2156}}
  • Grott MQTT topic used : energy/growatt
  • MQTT send failed: [Errno 99] Address not available
  • Grott Send data to PVOutput disabled
  • Grott Send data to Influx disabled
  • Grott extension processing started : grott_ha
    Grott HA 0.0.7-rc5 - creating TPJ4CEJ07G config in HA, 32 to push
    Pushing 33 configurations payload to HA
    Configurations pushed
  • Grott extension processing ended : 0
  • Growatt packet received:
    <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('172.30.33.4', 5279), raddr=('192.168.3.142', 1039)>
  • Data less then minimum record length, data not processed
  • Growatt packet received:
    <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('172.30.33.4', 42244), raddr=('47.91.67.66', 5279)>
  • Growatt original Data:
    \x00\x15\x00\x06\x00\xed\x50\x29\x0c\x25\x24\x46\x22\x3c\x46\x77\x31\x5a\x77
    \x61\x74\x74\x47\x72\x6f\x77\x61\x74\x74\x47\x72\x6f\x77\x61\x74\x74\x47\x72
    \x2e\x2d\x24\x44\x37\x05\x3a\x5f\x4e\x36\x74\x74\x47\x72\x6f\x77\x61\x74\x74
    \x47\x72\x6f\x77\x61\x74\x74\x47\x72\x6f\x77\x35\x24\x3e\x73\x31\x2a\x3d\x51
    \x43\x33\x47\x72\x6f\x77\x61\x74\x74\x47\x72\x6f\x77\x61\x74\x74\x47\x72\x6f
    \x77\x61\x74\x79\xea\x72\x6b\x77\x60\x45\x74\x42\x72\x6e\x46\x61\x72\x74\x45
    \x41\x5d\x77\x69\x74\x6a\x06\x28\x2a\x47\x22\x36\x3c\x77\x4b\x38\x77\x61\x74
    \x74\x47\x72\x6f\x77\x61\x74\x74\x47\x72\x6f\x77\x61\x74\x74\x47\x72\x6f\x7e
    \x61\x75\x44\x47\x78\x6f\x76\x51\x74\x7f\x47\x72\x6f\x7a\x61\x76\x45\x7f\x72
    \x7b\x77\x69\x33\x20\x14\x25\x5f\x47\x51\x44\x74\x52\x72\x68\x40\x4f\x40\x5a
    \x77\x5c\x5b\x77\x77\x74\x70\x11\x43\x41\x47\x61\x6f\x74\x46\x44\x6f\x6b\x61
    \x75\x44\x47\x6c\x6f\x72\x26\x39\x20\x6c\x4a\x6f\x68\x61\x67\x46\x77\x40\x5c
    \x5a\x51\x46\x59\x76\x4b\x4f\x46\x55\x4e\x46\x76\x48\x5a\x4e\xdb\x2f
  • Grott automatic protocol detection
  • Grott data record length 245
  • layout : T065029
  • no matching record layout found, try generic
  • Record layout used : T065029
  • Growatt data decrypted V2
  • Grott Growatt data decrypted
  • Growatt plain data:
    0015000600ed50294b574b3143483230433500000000000000000000000000000000000000004
    15a4530434248303957000000000000000000000000000000000000000054504a3443454a3037
    4700000000000000000000000000000000000000000dad0004000131000500013100060002333
    20008001e415a4530434248303957000000000000000000000000000000000000000000090001
    30000a000130000b0000000d0002313800140008475453573030303000150007372e342e302e3
    40016000456312e30001b000136001c000130001e0005474d542b38001f0013323032332d3032
    2d31392031343a32313a3539ba5b
  • Grott data ack record or data record not defined no processing done

[johanmeijer]

For the SPH inverter you have to specify invtype=sph in the grott.ini.

If you have multiple inverters please look at: https://github.com/johanmeijer/grott/wiki/Multi-Inverter-support

Grott will no use layout T06NNNXSPH and that will show also SOC.

[eismarkt]

I think now is the Right data there, but I don’t find the soc as entity in ha

1323.0
- MQTT jsonmsg:
{"device": "TPJ*****", "time": "2023-02-19T16:34:31", "buffered": "no",
"values": {"datalogserial": "KWK*****", "pvserial": "TPJ******",
"pvstatus": 5, "pvpowerin": 300, "pv1voltage": 6360, "pv1current": 0,
"pv1watt": 299, "pv2voltage": 2914, "pv2current": 0, "pv2watt": 61,
"pvpowerout": 2565, "pvfrequentie": 4997, "pvgridvoltage": 4053,
"pvgridcurrent": 7, "pvgridpower": 5104, "pvgridvoltage2": 4060,
"pvgridcurrent2": 7, "pvgridpower2": 0, "pvgridvoltage3": 3999,
"pvgridcurrent3": 7, "pvgridpower3": 0, "totworktime": 14191890, "eactoday":
29, "pvenergytoday": 29, "eactotal": 6644, "epvtotal": 4363, "epv1today":
60, "epv1total": 3380, "epv2today": 27, "epv2total": 983, "pvtemperature":
301, "pvipmtemperature": 293, "pvboosttemp": 289, "bat_dsp": 2124,
"eacharge_today": 20, "eacharge_total": 2609, "batterytype": 1,
"uwsysworkmode": 5, "systemfaultword0": 0, "systemfaultword1": 0,
"systemfaultword2": 0, "systemfaultword3": 0, "systemfaultword4": 0,
"systemfaultword5": 0, "systemfaultword6": 0, "systemfaultword7": 0,
"pdischarge1": 2359, "p1charge1": 0, "vbat": 2124, "SOC": 64, "pactouserr":
0, "pactousertot": 0, "pactogridr": 0, "pactogridtot": 0, "plocaloadr":
2600, "plocaloadtot": 2600, "spdspstatus": 5, "spbusvolt": 7135,
"etouser_tod": 46, "etouser_tot": 11214, "etogrid_tod": 1, "etogrid_tot":
2277, "edischarge1_tod": 13, "edischarge1_tot": 1666, "eharge1_tod": 74,
"eharge1_tot": 1887, "elocalload_tod": 76, "elocalload_tot": 13230}}