This documents provides guidelines to install board SDK required by this library.
FILE capturer is a dummy capturer that read sample frames from [resources/frames/]. It doesn't require user to manually install any 3rdparty SDK.
V4L2 request libv4l2 on your build device. You may install it via:
sudo apt install libv4l-dev
This library requires V4L2 cameras with H.264 encoder supports(i.e. Pi Camera). To check your camera capabilities, you may use v4l2-ctl --list-formats to check if it can be use. Take Pi camera as example:
v4l2-ctl --list-formats
ioctl: VIDIOC_ENUM_FMT
Type: Video Capture
[0]: 'YU12' (Planar YUV 4:2:0)
[1]: 'YUYV' (YUYV 4:2:2)
[2]: 'RGB3' (24-bit RGB 8-8-8)
[3]: 'JPEG' (JFIF JPEG, compressed)
[4]: 'H264' (H.264, compressed)
[5]: 'MJPG' (Motion-JPEG, compressed)
[6]: 'YVYU' (YVYU 4:2:2)
[7]: 'VYUY' (VYUY 4:2:2)
[8]: 'UYVY' (UYVY 4:2:2)
[9]: 'NV12' (Y/CbCr 4:2:0)
[10]: 'BGR3' (24-bit BGR 8-8-8)
[11]: 'YV12' (Planar YVU 4:2:0)
[12]: 'NV21' (Y/CrCb 4:2:0)
[13]: 'RX24' (32-bit XBGR 8-8-8-8)
It doesn't require other manually installation because CMake will download and build dependencies automatically.
User need to put T31 board SDK under 3rdparty/T31/:
T31/
|-- include
| |-- imp
| `-- sysutils
|-- lib
| |-- glibc
| `-- uclibc
`-- samples
|-- libimp-samples
`-- libsysutils-samples
User need to put FH8626V100 board SDK under 3rdparty/FH8626V100/:
FH8626V100/
├── common
├── include
└── lib
#AK3918
User need to put AK3918 board SDK under 3rdparty/AK3918:
AK3918/
├── framework
│ ├── include
│ └── lib
├── ipc_main.c
├── lib
│ ├── dynamic
│ └── static
└── platform
├── include
├── include_3rd
├── lib
└── sample