description	keywords	title	toc_max
Deploy services to a swarm	guide, swarm mode, swarm, service	Deploy services to a swarm	4

Swarm services use a declarative model, which means that you define the desired state of the service, and rely upon Docker to maintain this state. The state includes information such as (but not limited to):

the image name and tag the service containers should run
how many containers participate in the service
whether any ports are exposed to clients outside the swarm
whether the service should start automatically when Docker starts
the specific behavior that happens when the service is restarted (such as whether a rolling restart is used)
characteristics of the nodes where the service can run (such as resource constraints and placement preferences)

For an overview of swarm mode, see Swarm mode key concepts. For an overview of how services work, see How services work.

Create a service

To create a single-replica service with no extra configuration, you only need to supply the image name. This command starts an Nginx service with a randomly-generated name and no published ports. This is a naive example, since you won't be able to interact with the Nginx service.

$ docker service create nginx

The service is scheduled on an available node. To confirm that the service was created and started successfully, use the docker service ls command:

$ docker service ls

ID                  NAME                MODE                REPLICAS            IMAGE                                                                                             PORTS
a3iixnklxuem        quizzical_lamarr    replicated          1/1                 docker.io/library/nginx@sha256:41ad9967ea448d7c2b203c699b429abe1ed5af331cd92533900c6d77490e0268

Created services do not always run right away. A service can be in a pending state if its image is unavailable, if no node meets the requirements you configure for the service, or other reasons. See Pending services for more information.

To provide a name for your service, use the --name flag:

$ docker service create --name my_web nginx

Just like with standalone containers, you can specify a command that the service's containers should run, by adding it after the image name. This example starts a service called helloworld which uses an alpine image and runs the command ping docker.com:

$ docker service create --name helloworld alpine ping docker.com

You can also specify an image tag for the service to use. This example modifies the previous one to use the alpine:3.6 tag:

$ docker service create --name helloworld alpine:3.6 ping docker.com

For more details about image tag resolution, see Specify the image version the service should use.

Update a service

You can change almost everything about an existing service using the docker service update command. When you update a service, Docker stops its containers and restarts them with the new configuration.

Since Nginx is a web service, it will work much better if you publish port 80 to clients outside the swarm. You can specify this when you create the service, using the -p or --publish flag. When updating an existing service, the flag is --publish-add. There is also a --publish-rm flag to remove a port that was previously published.

Assuming that the my_web service from the previous section still exists, use the following command to update it to publish port 80.

$ docker service update --publish-add 80 my_web

To verify that it worked, use docker service ls:

$ docker service ls

ID                  NAME                MODE                REPLICAS            IMAGE                                                                                             PORTS
4nhxl7oxw5vz        my_web              replicated          1/1                 docker.io/library/nginx@sha256:41ad9967ea448d7c2b203c699b429abe1ed5af331cd92533900c6d77490e0268   *:0->80/tcp

For more information on how publishing ports works, see publish ports.

You can update almost every configuration detail about an existing service, including the image name and tag it runs. See Update a service's image after creation.

Remove a service

To remove a service, use the docker service remove command. You can remove a service by its ID or name, as shown in the output of the docker service ls command. The following command removes the my_web service.

$ docker service remove my_web

Service configuration details

The following sections provide details about service configuration. This topic does not cover every flag or scenario. In almost every instance where you can define a configuration at service creation, you can also update an existing service's configuration in a similar way.

See the command-line references for docker service create and docker service update, or run one of those commands with the --help flag.

Configure the runtime environment

You can configure the following options for the runtime environment in the container:

environment variables using the --env flag
the working directory inside the container using the --workdir flag
the username or UID using the --user flag

The following service's containers will have an environment variable $MYVAR set to myvalue, will run from the /tmp/ directory, and will run as the my_user user.

$ docker service create --name helloworld \
  --env MYVAR=myvalue \
  --workdir /tmp \
  --user my_user \
  alpine ping docker.com

Update the command an existing service runs

To update the command an existing service runs, you can use the --args flag. The following example updates an existing service called helloworld so that it runs the command ping docker.com instead of whatever command it was running before:

$ docker service update --args "ping docker.com" helloworld

Specify the image version a service should use

When you create a service without specifying any details about the version of the image to use, the service uses the version tagged with the latest tag. You can force the service to use a specific version of the image in a few different ways, depending on your desired outcome.

An image version can be expressed in several different ways:

If you specify a tag, the manager (or the Docker client, if you use content trust) resolves that tag to a digest. When the request to create a container task is received on a worker node, the worker node only sees the digest, not the tag.
```
$ docker service create --name="myservice" ubuntu:16.04
```
Some tags represent discrete releases, such as ubuntu:16.04. Tags like this will almost always resolve to a stable digest over time. It is recommended that you use this kind of tag when possible.

Other types of tags, such as latest or nightly, may resolve to a new digest often, depending on how often an image's author updates the tag. It is not recommended to run services using a tag which is updated frequently, to prevent different service replica tasks from using different image versions.
If you don't specify a version at all, by convention the image's latest tag is resolved to a digest. Workers use the image at this digest when creating the service task.

Thus, the following two commands are equivalent:
```
$ docker service create --name="myservice" ubuntu

$ docker service create --name="myservice" ubuntu:latest
```

If you specify a digest directly, that exact version of the image is always used when creating service tasks.

$ docker service create \
    --name="myservice" \
    ubuntu:16.04@sha256:35bc48a1ca97c3971611dc4662d08d131869daa692acb281c7e9e052924e38b1

When you create a service, the image's tag is resolved to the specific digest the tag points to at the time of service creation. Worker nodes for that service will use that specific digest forever unless the service is explicitly updated. This feature is particularly important if you do use often-changing tags such as latest, because it ensures that all service tasks use the same version of the image.

Note: If content trust is enabled, the client actually resolves the image's tag to a digest before contacting the swarm manager, in order to verify that the image is signed. Thus, if you use content trust, the swarm manager receives the request pre-resolved. In this case, if the client cannot resolve the image to a digest, the request fails. {: id="image_resolution_with_trust" }

If the manager is not able to resolve the tag to a digest, each worker node is responsible for resolving the tag to a digest, and different nodes may use different versions of the image. If this happens, a warning like the following will be logged, substituting the placeholders for real information.

unable to pin image <IMAGE-NAME> to digest: <REASON>

To see an image's current digest, issue the command docker inspect <IMAGE>:<TAG> and look for the RepoDigests line. The following is the current digest for ubuntu:latest at the time this content was written. The output is truncated for clarity.

$ docker inspect ubuntu:latest

"RepoDigests": [
    "ubuntu@sha256:35bc48a1ca97c3971611dc4662d08d131869daa692acb281c7e9e052924e38b1"
],

After you create a service, its image is never updated unless you explicitly run docker service update with the --image flag as described below. Other update operations such as scaling the service, adding or removing networks or volumes, renaming the service, or any other type of update operation do not update the service's image.

Update a service's image after creation

Each tag represents a digest, similar to a Git hash. Some tags, such as latest, are updated often to point to a new digest. Others, such as ubuntu:16.04, represent a released software version and are not expected to update to point to a new digest often if at all. In Docker 1.13 and higher, when you create a service, it is constrained to create tasks using a specific digest of an image until you update the service using service update with the --image flag. If you use an older version of Docker Engine, you must remove and re-create the service to update its image.

When you run service update with the --image flag, the swarm manager queries Docker Hub or your private Docker registry for the digest the tag currently points to and updates the service tasks to use that digest.

Note: If you use content trust, the Docker client resolves image and the swarm manager receives the image and digest, rather than a tag.

Usually, the manager is able to resolve the tag to a new digest and the service updates, redeploying each task to use the new image. If the manager is unable to resolve the tag or some other problem occurs, the next two sections outline what to expect.

If the manager resolves the tag

If the swarm manager can resolve the image tag to a digest, it instructs the worker nodes to redeploy the tasks and use the image at that digest.

If a worker has cached the image at that digest, it uses it.
If not, it attempts to pull the image from Docker Hub or the private registry.
- If it succeeds, the task is deployed using the new image.
- If the worker fails to pull the image, the service fails to deploy on that worker node. Docker tries again to deploy the task, possibly on a different worker node.

If the manager cannot resolve the tag

If the swarm manager cannot resolve the image to a digest, all is not lost:

The manager instructs the worker nodes to redeploy the tasks using the image at that tag.
If the worker has a locally cached image that resolves to that tag, it uses that image.
If the worker does not have a locally cached image that resolves to the tag, the worker tries to connect to Docker Hub or the private registry to pull the image at that tag.
- If this succeeds, the worker uses that image.
- If this fails, the task fails to deploy and the manager tries again to deploy the task, possibly on a different worker node.

Publish ports

When you create a swarm service, you can publish that service's ports to hosts outside the swarm in two ways:

[You can rely on the routing mesh](#publish-a services-ports-using-the-routing-mesh). When you publish a service port, the swarm makes the service accessible at the target port on every node, regardless of whether there is a task for the service running on that node or not. This is less complex and is the right choice for many types of services.
You can publish a service task's port directly on the swarm node where that service is running. This feature is available in Docker 1.13 and higher. This bypasses the routing mesh and provides the maximum flexibility, including the ability for you to develop your own routing framework. However, you are responsible for keeping track of where each task is running and routing requests to the tasks, and load-balancing across the nodes.

Keep reading for more information and use cases for each of these methods.

Publish a service's ports using the routing mesh

To publish a service's ports externally to the swarm, use the --publish <TARGET-PORT>:<SERVICE-PORT> flag. The swarm makes the service accessible at the target port on every swarm node. If an external host connects to that port on any swarm node, the routing mesh routes it to a task. The external host does not need to know the IP addresses or internally-used ports of the service tasks to interact with the service. When a user or process connects to a service, any worker node running a service task may respond. For more details about swarm service networking, see Manage swarm service networks.

Example: Run a three-task Nginx service on 10-node swarm

Imagine that you have a 10-node swarm, and you deploy an Nginx service running three tasks on a 10-node swarm:

$ docker service create --name my_web \
                        --replicas 3 \
                        --publish 8080:80 \
                        nginx

Three tasks will run on up to three nodes. You don't need to know which nodes are running the tasks; connecting to port 8080 on any of the 10 nodes will connect you to one of the three nginx tasks. You can test this using curl. The following example assumes that localhost is one of the swarm nodes. If this is not the case, or localhost does not resolve to an IP address on your host, substitute the host's IP address or resolvable host name.

The HTML output is truncated:

$ curl localhost:8080

<!DOCTYPE html>
<html>
<head>
<title>Welcome to nginx!</title>
...truncated...
</html>

Subsequent connections may be routed to the same swarm node or a different one.

Publish a service's ports directly on the swarm node

Using the routing mesh may not be the right choice for your application if you need to make routing decisions based on application state or you need total control of the process for routing requests to your service's tasks. To publish a service's port directly on the node where it is running, use the mode=host option to the --publish flag.

Note: If you publish a service's ports directly on the swarm node using mode=host and also set published=<PORT> this creates an implicit limitation that you can only run one task for that service on a given swarm node. In addition, if you use mode=host and you do not use the --mode=global flag on docker service create, it will be difficult to know which nodes are running the service in order to route work to them.

Example: Run a `nginx` web server service on every swarm node

nginx is an open source reverse proxy, load balancer, HTTP cache, and a web server. If you run nginx as a service using the routing mesh, connecting to the nginx port on any swarm node will show you the web page for (effectively) a random swarm node running the service.

The following example runs nginx as a service on each node in your swarm and exposes nginx port locally on each swarm node.

$ docker service create \
  --mode global \
  --publish mode=host,target=80,published=8080 \
  --name=nginx \
  nginx:latest

You can reach the nginx server on port 8080 of every swarm node. If you add a node to the swarm, a nginx task will be started on it. You cannot start another service or container on any swarm node which binds to port 8080.

Note: This is a naive example. Creating an application-layer routing framework for a multi-tiered service is complex and out of scope for this topic.

Connect the service to an overlay network

You can use overlay networks to connect one or more services within the swarm.

First, create overlay network on a manager node using the docker network create command with the --driver overlay flag.

$ docker network create --driver overlay my-network

After you create an overlay network in swarm mode, all manager nodes have access to the network.

You can create a new service and pass the --network flag to attach the service to the overlay network:

$ docker service create \
  --replicas 3 \
  --network my-network \
  --name my-web \
  nginx

The swarm extends my-network to each node running the service.

You can also connect an existing service to an overlay network using the --network-add flag.

$ docker service update --network-add my-network my-web

To disconnect a running service from a network, use the --network-rm flag.

$ docker service update --network-rm my-network my-web

For more information on overlay networking and service discovery, refer to Attach services to an overlay network and Docker swarm mode overlay network security model.

Grant a service access to secrets

To create a service with access to Docker-managed secrets, use the --secret flag. For more information, see Manage sensitive strings (secrets) for Docker services

Control service placement

Swarm services provide a few different ways for you to control scale and placement of services on different nodes.

You can specify whether the service needs to run a specific number of replicas or should run globally on every worker node. See Replicated or global services.
You can configure the service's CPU or memory requirements, and the service will only run on nodes which can meet those requirements.
Placement constraints let you configure the service to run only on nodes with specific (arbitrary) metadata set, and cause the deployment to fail if appropriate nodes do not exist. For instance, you can specify that your service should only run on nodes where an arbitrary label pci_compliant is set to true.
Placement preferences let you apply an arbitrary label with a range of values to each node, and spread your service's tasks across those nodes using an algorithm. Currently, the only supported algorithm is spread, which tries to place them evenly. For instance, if you label each node with a label rack which has a value from 1-10, then specify a placement preference keyed on rack, then service tasks are placed as evenly as possible across all nodes with the label rack, after taking other placement constraints, placement preferences, and other node-specific limitations into account.

Unlike constraints, placement preferences are best-effort, and a service will not fail to deploy if no nodes can satisfy the preference. If you specify a placement preference for a service, nodes that match that preference are ranked higher when the swarm managers decide which nodes should run the service tasks. Other factors, such as high availability of the service, will also factor into which nodes are scheduled to run service tasks. For example, if you have N nodes with the rack label (and then some others), and your service is configured to run N+1 replicas, the +1 will be scheduled on a node that doesn't already have the service on it if there is one, regardless of whether that node has the rack label or not.

Replicated or global services

Swarm mode has two types of services: replicated and global. For replicated services, you specify the number of replica tasks for the swarm manager to schedule onto available nodes. For global services, the scheduler places one task on each available node that meets the service's placement constraints and resource requirements.

You control the type of service using the --mode flag. If you don't specify a mode, the service defaults to replicated. For replicated services, you specify the number of replica tasks you want to start using the --replicas flag. For example, to start a replicated nginx service with 3 replica tasks:

$ docker service create \
  --name my_web \
  --replicas 3 \
  nginx

To start a global service on each available node, pass --mode global to docker service create. Every time a new node becomes available, the scheduler places a task for the global service on the new node. For example to start a service that runs alpine on every node in the swarm:

$ docker service create \
  --name myservice \
  --mode global \
  alpine top

Service constraints let you set criteria for a node to meet before the scheduler deploys a service to the node. You can apply constraints to the service based upon node attributes and metadata or engine metadata. For more information on constraints, refer to the docker service create CLI reference.

Reserve memory or CPUs for a service

To reserve a given amount of memory or number of CPUs for a service, use the --reserve-memory or --reserve-cpu flags. If no available nodes can satisfy the requirement (for instance, if you request 4 CPUs and no node in the swarm has 4 CPUs), the service remains in a pending state until a node is available to run its tasks.

Out Of Memory Exceptions (OOME)

If your service attempts to use more memory than the swarm node has available, you may experience an Out Of Memory Exception (OOME) and a container, or the Docker daemon, might be killed by the kernel OOM killer. To prevent this from happening, ensure that your application runs on hosts with adequate memory and see Understand the risks of running out of memory.

Swarm services allow you to use resource constraints, placement preferences, and labels to ensure that your service is deployed to the appropriate swarm nodes.

Placement constraints

Use placement constraints to control the nodes a service can be assigned to. In the following example, the service only runs on nodes with the label region set to east. If no appropriately-labelled nodes are available, deployment will fail. The --constraint flag uses an equality operator (== or !=). For replicated services, it is possible that all services will run on the same node, or each node will only run one replica, or that some nodes won't run any replicas. For global services, the service will run on every node that meets the placement constraint and any resource requirements.

$ docker service create \
  --name my-nginx \
  --replicas 5 \
  --constraint region==east \
  nginx

You can also use the constraint service-level key in a docker-compose.yml file.

If you specify multiple placement constraints, the service will only deploy onto nodes where they are all met. The following example limits the service to run on all nodes where region is set to east and type is not set to devel:

$ docker service create \
  --name my-nginx \
  --global \
  --constraint region==east \
  --constraint type!=devel \
  nginx

You can also use placement constraints in conjunction with placement preferences and CPU/memory constraints. Be careful not to use settings that will not be possible to fulfill.

For more information on constraints, refer to the docker service create CLI reference.

Placement preferences

While placement constraints limit the nodes a service can run on, placement preferences try to place services on appropriate nodes in an algorithmic way (currently, only spread evenly). For instance, if you assign each node a rack label, you can set a placement preference to spread the service evenly across nodes with the rack label, by value. This way, if you lose a rack, the service will still be running on nodes on other racks.

Placement preferences are not strictly enforced. If no node has the label you specify in your preference, the service will be deployed as though the preference were not set.

Placement preferences are ignored for global services.

The following example sets a preference to spread the deployment across nodes based on the value of the datacenter label. If some nodes have datacenter=us-east and others have datacenter=us-west, the service will be deployed as evenly as possible across the two sets of nodes.

$ docker service create \
  --replicas 9 \
  --name redis_2 \
  --placement-pref 'spread=node.labels.datacenter' \
  redis:3.0.6

You can specify multiple placement preferences, and they are processed in the order they are encountered. The following example sets up a service with multiple placement preferences. Tasks are spread first over the various datacenters, and then over racks (as indicated by the respective labels):

$ docker service create \
  --replicas 9 \
  --name redis_2 \
  --placement-pref 'spread=node.labels.datacenter' \
  --placement-pref 'spread=node.labels.rack' \
  redis:3.0.6

You can also use placement preferences in conjunction with placement constraints or CPU/memory constraints. Be careful not to use settings that will not be possible to fulfill.

This diagram illustrates how placement preferences work:

When updating a service with docker service update, --placement-pref-add appends a new placement preference after all existing placement preferences. --placement-pref-rm removes an existing placement preference that matches the argument.

Configure a service's update behavior

When you create a service, you can specify a rolling update behavior for how the swarm should apply changes to the service when you run docker service update. You can also specify these flags as part of the update, as arguments to docker service update.

The --update-delay flag configures the time delay between updates to a service task or sets of tasks. You can describe the time T as a combination of the number of seconds Ts, minutes Tm, or hours Th. So 10m30s indicates a 10 minute 30 second delay.

By default the scheduler updates 1 task at a time. You can pass the --update-parallelism flag to configure the maximum number of service tasks that the scheduler updates simultaneously.

When an update to an individual task returns a state of RUNNING, the scheduler continues the update by continuing to another task until all tasks are updated. If, at any time during an update a task returns FAILED, the scheduler pauses the update. You can control the behavior using the --update-failure-action flag for docker service create or docker service update.

In the example service below, the scheduler applies updates to a maximum of 2 replicas at a time. When an updated task returns either RUNNING or FAILED, the scheduler waits 10 seconds before stopping the next task to update:

$ docker service create \
  --replicas 10 \
  --name my_web \
  --update-delay 10s \
  --update-parallelism 2 \
  --update-failure-action continue \
  alpine

The --update-max-failure-ratio flag controls what fraction of tasks can fail during an update before the update as a whole is considered to have failed. For example, with --update-max-failure-ratio 0.1 --update-failure-action pause, after 10% of the tasks being updated fail, the update will be paused.

An individual task update is considered to have failed if the task doesn't start up, or if it stops running within the monitoring period specified with the --update-monitor flag. The default value for --update-monitor is 30 seconds, which means that a task failing in the first 30 seconds after its started counts towards the service update failure threshold, and a failure after that is not counted.

Roll back to the previous version of a service

In case the updated version of a service doesn't function as expected, it's possible to manually roll back to the previous version of the service using docker service update's --rollback flag. This will revert the service to the configuration that was in place before the most recent docker service update command.

Other options can be combined with --rollback; for example, --update-delay 0s to execute the rollback without a delay between tasks:

$ docker service update \
  --rollback \
  --update-delay 0s
  my_web

In Docker 17.04 and higher, you can configure a service to roll back automatically if a service update fails to deploy. See Automatically roll back if an update fails.

Related to the new automatic rollback feature, in Docker 17.04 and higher, manual rollback is handled at the server side, rather than the client, if the daemon is running Docker 17.04 or higher. This allows manually-initiated rollbacks to respect the new rollback parameters. The client is version-aware, so it will still use the old method against an older daemon.

Finally, in Docker 17.04 and higher, --rollback cannot be used in conjunction with other flags to docker service update.

Automatically roll back if an update fails

You can configure a service in such a way that if an update to the service causes redeployment to fail, the service can automatically roll back to the previous configuration. This helps protect service availability. You can set one or more of the following flags at service creation or update. If you do not set a value, the default is used.

Flag	Default	Description
`--rollback-delay`	`0s`	Amount of time to wait after rolling back a task before rolling back the next one. A value of `0` means to roll back the second task immediately after the first rolled-back task deploys.
`--rollback-failure-action`	`pause`	When a task fails to roll back, whether to `pause` or `continue` trying to roll back other tasks.
`--rollback-max-failure-ratio`	`0`	The failure rate to tolerate during a rollback, specified as a floating-point number between 0 and 1. For instance, given 5 tasks, a failure ratio of `.2` would tolerate one task failing to roll back. A value of `0` means no failure are tolerated, while a value of `1` means any number of failure are tolerated.
`--rollback-monitor`	`5s`	Duration after each task rollback to monitor for failure. If a task stops before this time period has elapsed, the rollback is considered to have failed.
`--rollback-parallelism`	`1`	The maximum number of tasks to roll back in parallel. By default, one task is rolled back at a time. A value of `0` causes all tasks to be rolled back in parallel.

The following example configures a redis service to roll back automatically if a docker service update fails to deploy. Two tasks can be rolled back in parallel. Tasks are monitored for 20 seconds after rollback to be sure they do not exit, and a maximum failure ratio of 20% is tolerated. Default values are used for --rollback-delay and --rollback-failure-action.

$ docker service create --name=my_redis \
                        --replicas=5 \
                        --rollback-parallelism=2 \
                        --rollback-monitor=20s \
                        --rollback-max-failure-ratio=.2 \
                        redis:latest

Give a service access to volumes or bind mounts

For best performance and portability, you should avoid writing important data directly into a container's writable layer, instead using data volumes or bind mounts. This principle also applies to services.

You can create two types of mounts for services in a swarm, volume mounts or bind mounts. Regardless of which type of mount you use, configure it using the --mount flag when you create a service, or the --mount-add or --mount-rm flag when updating an existing service.. The default is a data volume if you don't specify a type.

Data volumes

Data volumes are storage that remain alive after a container for a task has been removed. The preferred method to mount volumes is to leverage an existing volume:

$ docker service create \
  --mount src=<VOLUME-NAME>,dst=<CONTAINER-PATH> \
  --name myservice \
  <IMAGE>

For more information on how to create a volume, see the volume create CLI reference.

The following method creates the volume at deployment time when the scheduler dispatches a task, just before starting the container:

$ docker service create \
  --mount type=volume,src=<VOLUME-NAME>,dst=<CONTAINER-PATH>,volume-driver=<DRIVER>,volume-opt=<KEY0>=<VALUE0>,volume-opt=<KEY1>=<VALUE1>
  --name myservice \
  <IMAGE>

Important: If your volume driver accepts a comma-separated list as an option, you must escape the value from the outer CSV parser. To escape a volume-opt, surround it with double quotes (") and surround the entire mount parameter with single quotes (').

For example, the local driver accepts mount options as a comma-separated list in the o parameter. This example shows the correct way to escape the list.
$ docker service create \
     --mount 'type=volume,src=<VOLUME-NAME>,dst=<CONTAINER-PATH>,volume-driver=local,volume-opt=type=nfs,volume-opt=device=<nfs-server>:<nfs-path>,"volume-opt=o=addr=<nfs-address>,vers=4,soft,timeo=180,bg,tcp,rw"'
    --name myservice \
    <IMAGE>

Bind mounts

Bind mounts are file system paths from the host where the scheduler deploys the container for the task. Docker mounts the path into the container. The file system path must exist before the swarm initializes the container for the task.

The following examples show bind mount syntax:

To mount a read-write bind:

$ docker service create \
  --mount type=bind,src=<HOST-PATH>,dst=<CONTAINER-PATH> \
  --name myservice \
  <IMAGE>

To mount a read-only bind:

$ docker service create \
  --mount type=bind,src=<HOST-PATH>,dst=<CONTAINER-PATH>,readonly \
  --name myservice \
  <IMAGE>

Important: Bind mounts can be useful but they can also cause problems. In most cases, it is recommended that you architect your application such that mounting paths from the host is unnecessary. The main risks include the following:

If you bind mount a host path into your service’s containers, the path must exist on every swarm node. The Docker swarm mode scheduler can schedule containers on any machine that meets resource availability requirements and satisfies all constraints and placement preferences you specify.

The Docker swarm mode scheduler may reschedule your running service containers at any time if they become unhealthy or unreachable.

Host bind mounts are completely non-portable. When you use bind mounts, there is no guarantee that your application will run the same way in development as it does in production.

Create services using templates

You can use templates for some flags of service create, using the syntax provided by the Go's text/template package.

The following flags are supported:

--hostname
--mount
--env

Valid placeholders for the Go template are:

Placeholder	Description
`.Service.ID`	Service ID
`.Service.Name`	Service name
`.Service.Labels`	Service labels
`.Node.ID`	Node ID
`.Task.Name`	Task name
`.Task.Slot`	Task slot

Template example

This example sets the template of the created containers based on the service's name and the ID of the node where the container is running:

{% raw %}
$ docker service create --name hosttempl \
                        --hostname="{{.Node.ID}}-{{.Service.Name}}"\
                         busybox top
{% endraw %}

To see the result of using the template, use the docker service ps and docker inspect commands.

$ docker service ps va8ew30grofhjoychbr6iot8c

ID            NAME         IMAGE                                                                                   NODE          DESIRED STATE  CURRENT STATE               ERROR  PORTS
wo41w8hg8qan  hosttempl.1  busybox:latest@sha256:29f5d56d12684887bdfa50dcd29fc31eea4aaf4ad3bec43daf19026a7ce69912  2e7a8a9c4da2  Running        Running about a minute ago

{% raw %}
$ docker inspect --format="{{.Config.Hostname}}" hosttempl.1.wo41w8hg8qanxwjwsg4kxpprj
{% endraw %}

Learn More

Swarm administration guide
Docker Engine command line reference
Swarm mode tutorial

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

services.md

services.md

Create a service

Update a service

Remove a service

Service configuration details

Configure the runtime environment

Update the command an existing service runs

Specify the image version a service should use

Update a service's image after creation

If the manager resolves the tag

If the manager cannot resolve the tag

Publish ports

Publish a service's ports using the routing mesh

Example: Run a three-task Nginx service on 10-node swarm

Publish a service's ports directly on the swarm node

Example: Run a `nginx` web server service on every swarm node

Connect the service to an overlay network

Grant a service access to secrets

Control service placement

Replicated or global services

Reserve memory or CPUs for a service

Out Of Memory Exceptions (OOME)

Placement constraints

Placement preferences

Configure a service's update behavior

Roll back to the previous version of a service

Automatically roll back if an update fails

Give a service access to volumes or bind mounts

Data volumes

Bind mounts

Create services using templates

Template example

Learn More

Files

services.md

Latest commit

History

services.md

File metadata and controls

Create a service

Update a service

Remove a service

Service configuration details

Configure the runtime environment

Update the command an existing service runs

Specify the image version a service should use

Update a service's image after creation

If the manager resolves the tag

If the manager cannot resolve the tag

Publish ports

Publish a service's ports using the routing mesh

Example: Run a three-task Nginx service on 10-node swarm

Publish a service's ports directly on the swarm node

Example: Run a nginx web server service on every swarm node

Connect the service to an overlay network

Grant a service access to secrets

Control service placement

Replicated or global services

Reserve memory or CPUs for a service

Out Of Memory Exceptions (OOME)

Placement constraints

Placement preferences

Configure a service's update behavior

Roll back to the previous version of a service

Automatically roll back if an update fails

Give a service access to volumes or bind mounts

Data volumes

Bind mounts

Create services using templates

Template example

Learn More

Example: Run a `nginx` web server service on every swarm node