Skip to content

Latest commit

 

History

History
316 lines (174 loc) · 12.9 KB

RELEASE.md

File metadata and controls

316 lines (174 loc) · 12.9 KB
Raw

Instructions to release a new Spyder version

To release a new version of Spyder you need to follow these steps:

Create backport PR for new minor versions

Before releasing a new minor version (e.g. 6.1.0 after 6.0.x) that needs to include many changes only available in master, it's necessary to create a PR to backport those changes to the stable branch.

For that you need to run the following commands:

  • git checkout 6.x
  • git checkout -b backport-for-minor-version
  • git diff master 6.x > minor.patch
  • patch -p1 -R < minor.patch
  • git add . and git commit -m "Backport changes for X.X.X"

Update translation strings (at least one week before the release)

  • Install gettext-helpers from source.

  • Create a new PR to update our *.pot and *.po files by running

    spyder-gettext scan spyder

  • Check that no warnings are emitted by that command. If they are, then fix them in the same PR.

  • Merge that PR.

  • Close the current translation PR, i.e. the one with the title New Crowdin updates.

  • Delete the translate/<branch-name> branch associated to that PR.

  • Go to the integrations page on Crowdin:

    https://crowdin.com/project/spyder/apps/system/github

  • Press Sync now there to open a new translation PR.

  • Send a message to translators on Crowdin to update their translations:

    https://crowdin.com/messages

    An example of that message can be found in

    spyder-ide#14117

Before starting the release

Merge translations from Crowdin

  • Checkout the translations branch with

    git checkout translate/<branch-name>

  • Squash all commits in that branch to leave only one with the command

    git rebase --interactive HEAD~N

    where N is the number of commits on it.

  • Change the commit message with

    git commit --amend

    to be Update and compile translations [ci skip]

  • Generate the mo files by running

    spyder-gettext compile spyder

  • Remove mo files that are still not part of version control.

  • Add those files to the previous commit with

    git add .
git commit --amend --no-edit

  • Push your changes to the translation PR with

    git push -f upstream translate/<branch-name>

  • Rename the PR title to be PR: Update translations from Crowdin.

  • Merge the PR.

  • Don't forget to remove your local checkout of translate/<branch-name> because that's going to be outdated for next time.

  • Update the <branch-name> branch as necessary. For example, if translations were done for the stable branch 6.x, you could do the update with

    git checkout 6.x
git fetch upstream
git merge upstream/6.x

Update core dependencies

  • Release a new version of spyder-kernels, if required.

  • Release a new version of python-lsp-server, if required.

  • Release a new version of qtconsole, if required.

  • Merge PRs on Conda-forge that update the spyder-kernels, python-lsp-server and qtconsole feedstocks (usually an automatic PR will appear that can be either merged as it is or be used as boilerplate):

    Notes:

    • Review carefully the release notes of those packages to see if it's necessary to add new dependencies or update the constraints on the current ones (e.g. jedi >=0.17.2).

  • For spyder-kernels:

    • Switch to the stable branch

      git checkout 6.x

    • Create a new branch in your fork with the name update-spyder-kernels

    • Update version in

      • setup.py

      • spyder/dependencies.py

      • requirements/{main,windows,macos,linux}.yml

      • binder/environment.yml

      • spyder/plugins/ipythonconsole/__init__.py (look up for the constants SPYDER_KERNELS_MIN_VERSION and SPYDER_KERNELS_MAX_VERSION)

        Note: Usually, the version of spyder-kernels for validation in the IPython Console only needs to be updated for minor or major releases of that package or when doing alphas for Spyder. For bugfix releases the value should remain the same to not hassle users using custom interpreters into updating spyder-kernels in their environments. However, this depends on the type of bugs resolved and if it's worthy to reinforce the need of an update even for those versions.

    • Commit with

      git add .
git commit -m "Update spyder-kernels"

    • Update our subrepo with the following command, but only if a new version is available!

      git subrepo pull external-deps/spyder-kernels

    • Merge this PR to the stable branch.

  • For other dependencies

    • Create a new branch in your fork with the name update-core-deps

    • Update the version of any packages required before the release in the following files:

      • setup.py (look up for the install_requires variable and also for the Loosen constraints to ensure dev versions still work patch)
      • spyder/dependencies.py
      • requirements/{main,windows,macos,linux}.yml
      • binder/environment.yml

    • Commit with

      git add .
git commit -m "Update core dependencies"

    • Update our subrepos with the following commands, but only if new versions are available!

      git subrepo pull external-deps/python-lsp-server
git subrepo pull external-deps/qtconsole

    • Merge this PR following the procedure mentioned on MAINTENANCE.md

Check release candidate

  • For pre-releases of a new bug fix version

    • Switch to the stable branch

      git checkout 6.x

    • Update version in __init__.py (set release version, remove 'dev0', add 'rcX'), then

      git add .
git commit -m "Release X.X.XrcX"

    • Follow the instructions in the To do the PyPI release and version tag section, from the git clean -xfdi one onwards.

    • Publish the release to Conda-forge by doing a PR against the rc branch of the spyder-feedstock repo.

    • Publish the release in our Github Releases page to check the installers are built as expected.

    • Download and test the installation of the resulting installers.

  • For pre-releases of a new minor or major version:

    • Switch to master

      git checkout master

    • Update version in __init__.py (set release version, remove 'dev0', add 'rcX'), then

      git add .
git commit -m "Release X.X.XrcX [ci skip]"

    • Push changes to master

      git push upstream master

    • Manually activate the following workflows (see Running a workflow) via the Run workflow button:

    • Download and test the installation of the resulting artifacts.

  • If one of the previous steps fails, merge a fix PR and start the process again with an incremented 'rcX' commit.

Update Changelog, Announcements and metadata files

  • Create a PR in master to update those files by following the steps below.

  • For a new major release (e.g. 6.0.0):

    • In CHANGELOG.md, move entry for current version to the Older versions section and add one for the new version.
    • git add . and git commit -m "Add link to changelog of new major version"
    • In .github/workflows/test-*.yml, add 6.* to the branches sections and remove the oldest branch from them (e.g. 4.*).
    • git add . and git commit -m "CI: Update workflows to run in new stable branch [ci skip]"

  • For the first alpha of a new major version (e.g 7.0.0a1):

    • Add a new file called changelogs/Spyder-X+1.md to the tree (e.g. changelogs/Spyder-7.md).
    • Add changelogs/Spyder-X+1.md to MANIFEST.in, remove changelogs/Spyder-X.md from it and add that path to the check-manifest/ignore section of setup.cfg.

  • Update changelogs/Spyder-X.md (changelogs/Spyder-6.md for Spyder 6 for example) with loghub spyder-ide/spyder -m vX.X.X

  • Add sections for New features, Important fixes and New API features in changelogs/Spyder-X.md. For this take a look at closed issues and PRs for the current milestone.

  • git add . and git commit -m "Update Changelog"

  • Update Announcements.md (this goes to our Google group) removing the outdated announcement of the same kind (major, minor, or beta/release candidate)

  • git add . and git commit -m "Update Announcements"

  • Update org.spyder_ide.spyder.appdata.xml adding the version to be released over the <releases> tag

  • git add . and git commit -m "Update metadata files"

  • Once merged, backport the PR that contains these changes to the stable branch (e.g. 6.x)

To do the PyPI release and version tag

  • Close the current milestone on Github

  • git pull or git fetch/merge the respective branch that will be released (e.g 6.x - stable branch or master - alphas/betas/rcs of a new minor/major version).

  • For a new major release (e.g. version 6.0.0 after 5.5.6):

    • git checkout -b 6.x
    • git checkout master
    • Update version in __init__.py to reflect next minor version as dev version (i.e 6.1.0a1.dev0).
    • git add . and git commit -m "Bump version to new minor version"
    • git checkout 6.x

  • Update version in __init__.py (Remove '{a/b/rc}X' and 'dev0' for stable versions; or remove 'dev0' for pre-releases)

  • git add . and git commit -m "Release X.X.X"

  • git clean -xfdi and select option 1

  • python setup.py sdist

    Note: This needs to be done on a Linux machine to prevent getting permission errors on executable files (see #21892 and #14494).

  • Activate environment with pip packages only

  • pip install -U pip setuptools twine wheel

  • python setup.py bdist_wheel

    Note: This needs to be done on a Linux machine to prevent getting permission errors in executable files (see #21892 and #14494).

  • Install generated wheel locally and check for errors

  • twine check --strict dist/*

  • twine upload dist/*

  • Check in PyPI that the new release was published correctly

  • git tag -a vX.X.X -m "Release X.X.X"

  • Update version in __init__.py:

    • Add 'a1', 'dev0' and increment patch version for final version releases
    • Add 'dev0' and increment alpha/beta/rc version for pre-releases

  • git add . and git commit -m "Back to work [ci skip]"

  • Push changes and new tag to the corresponding branches. When doing a stable release from 6.x, for example, you could push changes with

    git push upstream 6.x
git push upstream --tags

After the PyPI release

  • Merge PR on Conda-forge for Spyder. For that you can go to the spyder-feedstock repo and merge the corresponding PR for the new release (usually an automatic PR will appear that can be either merged as it is or be use as boilerplate).

    Notes:

    • Don't forget to add new dependencies and update constraints on the rest of them. For that, you need to compare line by line the contents of the recipe/meta.yaml file in the feedstock with setup.py

  • Update Binder related elements when the new Spyder version is available in Conda-forge:

    • Update the Spyder version on the environment file (binder/environment.yml) of the (spyder-stable branch) in the binder-environments repo.
    • Update environment.yml files of the master branch of binder-environments with the contents of the binder/environment.yml file present on this repo.
    • Update environment.yml files of the 6.x branches of binder-environments with the contents of the binder/environment.yml file present on this repo.

  • Publish release in our Github Releases page:

    • Copy the contents of the previous release description (updating the relevant information and links to point to the new Spyder version and changelog entry).
    • Edit the previous release description to only have the changelog line.

  • Publish release announcement to our list (following Announcements.md) after the installers have been built.