diff --git a/NEWS.adoc b/NEWS.adoc
index dbef0108fa..73dc1b49f6 100644
--- a/NEWS.adoc
+++ b/NEWS.adoc
@@ -237,6 +237,11 @@ as part of https://github.com/networkupstools/nut/issues/1410 solution.
    of all USB drivers using these options to include the same description
    [#1766]
 
+ - Added a "busport" USB matching option (if supported by the hardware, OS and
+   libusb on the particular deployment, it should allow to specify physical
+   port numbers on an USB hub, rather than logical "device" enumeration values,
+   and in turn -- this should be less volatile across reboots etc.) [#2043]
+
  - Added an `allow_duplicates` flag for common USB matching options which
    may help monitor several related no-name devices (although without knowing
    reliably which one is which... better than nothing) [#1756]
diff --git a/docs/man/nut_usb_addvars.txt b/docs/man/nut_usb_addvars.txt
index c9a9c5d1d9..b96b252d8d 100644
--- a/docs/man/nut_usb_addvars.txt
+++ b/docs/man/nut_usb_addvars.txt
@@ -56,18 +56,30 @@ Examples:
 
 Select a UPS on a specific USB bus or group of buses. The argument is
 a regular expression that must match the bus name where the UPS is
-connected (e.g. `bus="002"` or `bus="00[2-3]"`) as seen in
-`/proc/bus/usb/devices` or *lsusb(8)*; including leading zeroes.
+connected (e.g. `bus="002"` or `bus="00[2-3]"`) as seen on Linux in
+`/sys/bus/usb/devices` or *lsusb(8)*; including leading zeroes.
 
 *device =* 'regex'::
 
 Select a UPS on a specific USB device or group of devices. The argument is
 a regular expression that must match the device name where the UPS is
-connected (e.g. `device="001"` or `device="00[1-2]"`) as seen in
-`/proc/bus/usb/devices` or *lsusb(8)*; including leading zeroes.
-Note that device numbers are not guaranteed by the OS to be stable across
+connected (e.g. `device="001"` or `device="00[1-2]"`) as seen on Linux
+in `/sys/bus/usb/devices` or *lsusb(8)*; including leading zeroes.
++
+NOTE: device numbers are not guaranteed by the OS to be stable across
 re-boots or device re-plugging.
 
+*busport =* 'regex'::
+
+If supported by the hardware, OS and libusb on the particular deployment,
+this option should allow to specify physical port numbers on an USB hub,
+rather than logical `device` enumeration values, and in turn -- this should
+be less volatile across reboots or re-plugging.
++
+NOTE: this option is not practically supported by some NUT builds
+(it should be ignored with a warning then), and not by all systems
+that NUT can run on.
+
 *allow_duplicates*::
 
 If you have several UPS devices which may not be uniquely identified by
diff --git a/docs/nut.dict b/docs/nut.dict
index 34573c555a..d25aae15a6 100644
--- a/docs/nut.dict
+++ b/docs/nut.dict
@@ -1,4 +1,4 @@
-personal_ws-1.1 en 3222 utf-8
+personal_ws-1.1 en 3223 utf-8
 AAS
 ABI
 ACFAIL
@@ -1639,6 +1639,7 @@ bugfixes
 buildbots
 builddir
 bullseye
+busport
 busybox
 bv
 bypassvolts
diff --git a/drivers/blazer_usb.c b/drivers/blazer_usb.c
index 6cb3337ad7..2bc9c28258 100644
--- a/drivers/blazer_usb.c
+++ b/drivers/blazer_usb.c
@@ -37,7 +37,7 @@
 #endif
 
 #define DRIVER_NAME	"Megatec/Q1 protocol USB driver"
-#define DRIVER_VERSION	"0.16"
+#define DRIVER_VERSION	"0.17"
 
 /* driver description structure */
 upsdrv_info_t upsdrv_info = {
@@ -597,7 +597,7 @@ void upsdrv_initups(void)
 #ifndef TESTING
 	int	ret, langid;
 	char	tbuf[255]; /* Some devices choke on size > 255 */
-	char	*regex_array[7];
+	char	*regex_array[USBMATCHER_REGEXP_ARRAY_LIMIT];
 	char	*subdrv = getval("subdriver");
 
 	warn_if_bad_usb_port_filename(device_path);
@@ -609,6 +609,13 @@ void upsdrv_initups(void)
 	regex_array[4] = getval("serial");
 	regex_array[5] = getval("bus");
 	regex_array[6] = getval("device");
+#if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+	regex_array[7] = getval("busport");
+# else
+	if (getval("busport")) {
+		upslogx(LOG_WARNING, "\"busport\" is configured for the device, but is not actually handled by current build combination of NUT and libusb (ignored)");
+	}
+# endif
 
 	/* check for language ID workaround (#1) */
 	if (getval("langid_fix")) {
@@ -725,5 +732,8 @@ void upsdrv_cleanup(void)
 	free(usbdevice.Serial);
 	free(usbdevice.Bus);
 	free(usbdevice.Device);
+#if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+	free(usbdevice.BusPort);
+# endif
 #endif	/* TESTING */
 }
diff --git a/drivers/libshut.c b/drivers/libshut.c
index 79acd0ade8..3601c0c344 100644
--- a/drivers/libshut.c
+++ b/drivers/libshut.c
@@ -43,7 +43,7 @@
 #include "common.h" /* for xmalloc, upsdebugx prototypes */
 
 #define SHUT_DRIVER_NAME	"SHUT communication driver"
-#define SHUT_DRIVER_VERSION	"0.87"
+#define SHUT_DRIVER_VERSION	"0.88"
 
 /* communication driver description structure */
 upsdrv_info_t comm_upsdrv_info = {
@@ -468,14 +468,26 @@ static int libshut_open(
 	free(curDevice->Serial);
 	free(curDevice->Bus);
 	free(curDevice->Device);
+#if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+	free(curDevice->BusPort);
+#endif
 	memset(curDevice, '\0', sizeof(*curDevice));
 
 	curDevice->VendorID = dev_descriptor->idVendor;
 	curDevice->ProductID = dev_descriptor->idProduct;
 	curDevice->Bus = strdup("serial");
 	curDevice->Device = strdup(arg_device_path);
+#if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+	curDevice->BusPort = (char *)malloc(4);
+	if (curDevice->BusPort == NULL) {
+		fatal_with_errno(EXIT_FAILURE, "Out of memory");
+	}
+	upsdebugx(2, "%s: NOTE: BusPort is always zero with libshut", __func__);
+	sprintf(curDevice->BusPort, "%03d", 0);
+#endif
+
 	curDevice->bcdDevice = dev_descriptor->bcdDevice;
-	curDevice->Vendor = strdup("Eaton");
+	curDevice->Vendor = NULL;
 	if (dev_descriptor->iManufacturer) {
 		ret = shut_get_string_simple(*arg_upsfd, dev_descriptor->iManufacturer,
 			string, MAX_STRING_SIZE);
@@ -483,6 +495,9 @@ static int libshut_open(
 			curDevice->Vendor = strdup(string);
 		}
 	}
+	if (curDevice->Vendor == NULL) {
+		curDevice->Vendor = strdup("Eaton");
+	}
 
 	/* ensure iProduct retrieval */
 	if (dev_descriptor->iProduct) {
@@ -514,6 +529,9 @@ static int libshut_open(
 	upsdebugx(2, "- Product: %s", curDevice->Product);
 	upsdebugx(2, "- Serial Number: %s", curDevice->Serial);
 	upsdebugx(2, "- Bus: %s", curDevice->Bus);
+#if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+	upsdebugx(2, "- Bus Port: %s", curDevice->BusPort ? curDevice->BusPort : "unknown");
+#endif
 	upsdebugx(2, "- Device: %s", curDevice->Device ? curDevice->Device : "unknown");
 	upsdebugx(2, "- Device release number: %04x", curDevice->bcdDevice);
 	upsdebugx(2, "Device matches");
diff --git a/drivers/libshut.h b/drivers/libshut.h
index 84da1af1ed..caa0780ce8 100644
--- a/drivers/libshut.h
+++ b/drivers/libshut.h
@@ -116,7 +116,7 @@ typedef int usb_ctrl_timeout_msec;	/* in milliseconds */
 
 /*!
  * SHUTDevice_t: Describe a SHUT device. This structure contains exactly
- * the 5 pieces of information by which a SHUT device identifies
+ * the 5 or more pieces of information by which a SHUT device identifies
  * itself, so it serves as a kind of "fingerprint" of the device. This
  * information must be matched exactly when reopening a device, and
  * therefore must not be "improved" or updated by a client
@@ -132,6 +132,9 @@ typedef struct SHUTDevice_s {
 	char*		Bus;       /*!< Bus name, e.g. "003"  */
 	uint16_t	bcdDevice; /*!< Device release number */
 	char		*Device;   /*!< Device name on the bus, e.g. "001"  */
+#if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+	char		*BusPort;  /*!< Port name, e.g. "001"  */
+#endif
 } SHUTDevice_t;
 
 /*!
diff --git a/drivers/libusb0.c b/drivers/libusb0.c
index b07a363c0c..86072bbba7 100644
--- a/drivers/libusb0.c
+++ b/drivers/libusb0.c
@@ -37,7 +37,7 @@
 #endif
 
 #define USB_DRIVER_NAME		"USB communication driver (libusb 0.1)"
-#define USB_DRIVER_VERSION	"0.44"
+#define USB_DRIVER_VERSION	"0.45"
 
 /* driver description structure */
 upsdrv_info_t comm_upsdrv_info = {
@@ -76,6 +76,11 @@ void nut_usb_addvars(void)
 
 	addvar(VAR_VALUE, "bus", "Regular expression to match USB bus name");
 	addvar(VAR_VALUE, "device", "Regular expression to match USB device name");
+	/* Not supported by libusb0, but let's not crash config
+	 * parsing on unknown keywords due to such nuances! :) */
+	addvar(VAR_VALUE, "busport", "Regular expression to match USB bus port name"
+		" (tolerated but ignored in this build)"
+	);
 
 	/* Warning: this feature is inherently non-deterministic!
 	 * If you only care to know that at least one of your no-name UPSes is online,
@@ -287,6 +292,9 @@ static int libusb_open(usb_dev_handle **udevp,
 			free(curDevice->Serial);
 			free(curDevice->Bus);
 			free(curDevice->Device);
+#if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+			free(curDevice->BusPort);
+#endif
 			memset(curDevice, '\0', sizeof(*curDevice));
 
 			/* Keep the list of items in sync with those matched by
@@ -298,6 +306,15 @@ static int libusb_open(usb_dev_handle **udevp,
 			curDevice->Device = xstrdup(dev->filename);
 			curDevice->bcdDevice = dev->descriptor.bcdDevice;
 
+#if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+			curDevice->BusPort = (char *)malloc(4);
+			if (curDevice->BusPort == NULL) {
+				fatal_with_errno(EXIT_FAILURE, "Out of memory");
+			}
+			upsdebugx(2, "%s: NOTE: BusPort is always zero with libusb0", __func__);
+			sprintf(curDevice->BusPort, "%03d", 0);
+#endif
+
 			if (dev->descriptor.iManufacturer) {
 				retries = MAX_RETRY;
 				while (retries > 0) {
@@ -347,6 +364,9 @@ static int libusb_open(usb_dev_handle **udevp,
 			upsdebugx(2, "- Serial Number: %s", curDevice->Serial ? curDevice->Serial : "unknown");
 			upsdebugx(2, "- Bus: %s", curDevice->Bus ? curDevice->Bus : "unknown");
 			upsdebugx(2, "- Device: %s", curDevice->Device ? curDevice->Device : "unknown");
+#if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+			upsdebugx(2, "- Bus Port: %s", curDevice->BusPort ? curDevice->BusPort : "unknown");
+#endif
 			upsdebugx(2, "- Device release number: %04x", curDevice->bcdDevice);
 
 			/* FIXME: extend to Eaton OEMs (HP, IBM, ...) */
diff --git a/drivers/libusb1.c b/drivers/libusb1.c
index 522d8a183d..84d5ebdbc3 100644
--- a/drivers/libusb1.c
+++ b/drivers/libusb1.c
@@ -33,7 +33,7 @@
 #include "nut_stdint.h"
 
 #define USB_DRIVER_NAME		"USB communication driver (libusb 1.0)"
-#define USB_DRIVER_VERSION	"0.45"
+#define USB_DRIVER_VERSION	"0.46"
 
 /* driver description structure */
 upsdrv_info_t comm_upsdrv_info = {
@@ -66,6 +66,15 @@ void nut_usb_addvars(void)
 
 	addvar(VAR_VALUE, "bus", "Regular expression to match USB bus name");
 	addvar(VAR_VALUE, "device", "Regular expression to match USB device name");
+	addvar(VAR_VALUE, "busport", "Regular expression to match USB bus port name"
+#if (!defined WITH_USB_BUSPORT) || (!WITH_USB_BUSPORT)
+		/* Not supported by this version of libusb1,
+		 * but let's not crash config parsing on
+		 * unknown keywords due to such nuances! :)
+		 */
+		" (tolerated but ignored in this build)"
+#endif
+	);
 
 	/* Warning: this feature is inherently non-deterministic!
 	 * If you only care to know that at least one of your no-name UPSes is online,
@@ -163,6 +172,9 @@ static int nut_libusb_open(libusb_device_handle **udevp,
 	const struct libusb_interface_descriptor *if_desc;
 	libusb_device_handle *udev;
 	uint8_t bus_num, device_addr;
+#if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+	uint8_t bus_port;
+#endif
 	int ret, res;
 	unsigned char buf[20];
 	const unsigned char *p;
@@ -237,6 +249,9 @@ static int nut_libusb_open(libusb_device_handle **udevp,
 		free(curDevice->Serial);
 		free(curDevice->Bus);
 		free(curDevice->Device);
+#if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+		free(curDevice->BusPort);
+#endif
 		memset(curDevice, '\0', sizeof(*curDevice));
 
 		/* Keep the list of items in sync with those matched by
@@ -278,6 +293,21 @@ static int nut_libusb_open(libusb_device_handle **udevp,
 			}
 		}
 
+#if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+		bus_port = libusb_get_port_number(device);
+		curDevice->BusPort = (char *)malloc(4);
+		if (curDevice->BusPort == NULL) {
+			libusb_free_device_list(devlist, 1);
+			fatal_with_errno(EXIT_FAILURE, "Out of memory");
+		}
+		if (bus_port > 0) {
+			sprintf(curDevice->BusPort, "%03d", bus_port);
+		} else {
+			upsdebugx(1, "%s: invalid libusb bus number %i",
+				__func__, bus_port);
+		}
+#endif
+
 		curDevice->VendorID = dev_desc.idVendor;
 		curDevice->ProductID = dev_desc.idProduct;
 		curDevice->bcdDevice = dev_desc.bcdDevice;
@@ -342,6 +372,9 @@ static int nut_libusb_open(libusb_device_handle **udevp,
 		upsdebugx(2, "- Product: %s", curDevice->Product ? curDevice->Product : "unknown");
 		upsdebugx(2, "- Serial Number: %s", curDevice->Serial ? curDevice->Serial : "unknown");
 		upsdebugx(2, "- Bus: %s", curDevice->Bus ? curDevice->Bus : "unknown");
+#if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+		upsdebugx(2, "- Bus Port: %s", curDevice->BusPort ? curDevice->BusPort : "unknown");
+#endif
 		upsdebugx(2, "- Device: %s", curDevice->Device ? curDevice->Device : "unknown");
 		upsdebugx(2, "- Device release number: %04x", curDevice->bcdDevice);
 
diff --git a/drivers/nutdrv_qx.c b/drivers/nutdrv_qx.c
index 83ab443a87..f394ce5213 100644
--- a/drivers/nutdrv_qx.c
+++ b/drivers/nutdrv_qx.c
@@ -57,7 +57,7 @@
 	#define DRIVER_NAME	"Generic Q* Serial driver"
 #endif	/* QX_USB */
 
-#define DRIVER_VERSION	"0.35"
+#define DRIVER_VERSION	"0.36"
 
 #ifdef QX_SERIAL
 	#include "serial.h"
@@ -3016,6 +3016,9 @@ void	upsdrv_initups(void)
 		getval("serial") ||
 		getval("bus") ||
 		getval("langid_fix")
+#if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+		|| getval("busport")
+#endif
 	) {
 		/* USB */
 		is_usb = 1;
@@ -3107,10 +3110,10 @@ void	upsdrv_initups(void)
 
 	warn_if_bad_usb_port_filename(device_path);
 
-	#ifndef TESTING
+# ifndef TESTING
 		int	ret, langid;
 		char	tbuf[255];	/* Some devices choke on size > 255 */
-		char	*regex_array[7];
+		char	*regex_array[USBMATCHER_REGEXP_ARRAY_LIMIT];
 
 		char	*subdrv = getval("subdriver");
 
@@ -3121,6 +3124,13 @@ void	upsdrv_initups(void)
 		regex_array[4] = getval("serial");
 		regex_array[5] = getval("bus");
 		regex_array[6] = getval("device");
+#  if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+		regex_array[7] = getval("busport");
+#  else
+		if (getval("busport")) {
+			upslogx(LOG_WARNING, "\"busport\" is configured for the device, but is not actually handled by current build combination of NUT and libusb (ignored)");
+		}
+#  endif
 
 		/* Check for language ID workaround (#1) */
 		if (getval("langid_fix")) {
@@ -3236,11 +3246,11 @@ void	upsdrv_initups(void)
 			}
 		}
 
-	#endif	/* TESTING */
+# endif	/* TESTING */
 
-	#ifdef QX_SERIAL
+# ifdef QX_SERIAL
 	}	/* is_usb */
-	#endif	/* QX_SERIAL */
+# endif	/* QX_SERIAL */
 
 #endif	/* QX_USB */
 
@@ -3260,23 +3270,22 @@ void	upsdrv_cleanup(void)
 
 #ifndef TESTING
 
-#ifdef QX_SERIAL
+# ifdef QX_SERIAL
 
-	#ifdef QX_USB
+#  ifdef QX_USB
 	if (!is_usb) {
-	#endif	/* QX_USB */
+#  endif	/* QX_USB */
 
 		ser_set_dtr(upsfd, 0);
 		ser_close(upsfd, device_path);
 
-	#ifdef QX_USB
+#  ifdef QX_USB
 	} else {	/* is_usb */
-	#endif	/* QX_USB */
+#  endif	/* QX_USB */
 
-#endif	/* QX_SERIAL */
-
-#ifdef QX_USB
+# endif	/* QX_SERIAL */
 
+# ifdef QX_USB
 		usb->close_dev(udev);
 		USBFreeExactMatcher(reopen_matcher);
 		USBFreeRegexMatcher(regex_matcher);
@@ -3285,12 +3294,15 @@ void	upsdrv_cleanup(void)
 		free(usbdevice.Serial);
 		free(usbdevice.Bus);
 		free(usbdevice.Device);
+#  if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+		free(usbdevice.BusPort);
+#  endif
 
-	#ifdef QX_SERIAL
+#  ifdef QX_SERIAL
 	}	/* is_usb */
-	#endif	/* QX_SERIAL */
+#  endif	/* QX_SERIAL */
 
-#endif	/* QX_USB */
+# endif	/* QX_USB */
 
 #endif	/* TESTING */
 
diff --git a/drivers/riello_usb.c b/drivers/riello_usb.c
index b0c6a51b5a..1a7fe7d4f3 100644
--- a/drivers/riello_usb.c
+++ b/drivers/riello_usb.c
@@ -34,7 +34,7 @@
 #include "riello.h"
 
 #define DRIVER_NAME	"Riello USB driver"
-#define DRIVER_VERSION	"0.09"
+#define DRIVER_VERSION	"0.10"
 
 #define DEFAULT_OFFDELAY   5  /*!< seconds (max 0xFF) */
 #define DEFAULT_BOOTDELAY  5  /*!< seconds (max 0xFF) */
@@ -851,7 +851,7 @@ void upsdrv_initups(void)
 	};
 
 	int	ret;
-	char	*regex_array[7];
+	char	*regex_array[USBMATCHER_REGEXP_ARRAY_LIMIT];
 
 	char	*subdrv = getval("subdriver");
 
@@ -864,6 +864,13 @@ void upsdrv_initups(void)
 	regex_array[4] = getval("serial");
 	regex_array[5] = getval("bus");
 	regex_array[6] = getval("device");
+#if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+	regex_array[7] = getval("busport");
+#else
+	if (getval("busport")) {
+		upslogx(LOG_WARNING, "\"busport\" is configured for the device, but is not actually handled by current build combination of NUT and libusb (ignored)");
+	}
+#endif
 
 	/* pick up the subdriver name if set explicitly */
 	if (subdrv) {
@@ -1233,4 +1240,7 @@ void upsdrv_cleanup(void)
 	free(usbdevice.Serial);
 	free(usbdevice.Bus);
 	free(usbdevice.Device);
+#if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+	free(usbdevice.BusPort);
+#endif
 }
diff --git a/drivers/tripplite_usb.c b/drivers/tripplite_usb.c
index 84508f8f2e..858b93dcd0 100644
--- a/drivers/tripplite_usb.c
+++ b/drivers/tripplite_usb.c
@@ -1568,7 +1568,7 @@ void upsdrv_makevartable(void)
  */
 void upsdrv_initups(void)
 {
-	char *regex_array[7];
+	char *regex_array[USBMATCHER_REGEXP_ARRAY_LIMIT];
 	char *value;
 	int r;
 
@@ -1582,6 +1582,9 @@ void upsdrv_initups(void)
 	regex_array[4] = getval("serial"); /* probably won't see this */
 	regex_array[5] = getval("bus");
 	regex_array[6] = getval("device");
+#if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+	regex_array[7] = getval("busport");
+#endif
 
 	r = USBNewRegexMatcher(&regex_matcher, regex_array, REG_ICASE | REG_EXTENDED);
 	if (r==-1) {
@@ -1656,4 +1659,7 @@ void upsdrv_cleanup(void)
 	free(curDevice.Serial);
 	free(curDevice.Bus);
 	free(curDevice.Device);
+#if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+	free(curDevice.BusPort);
+#endif
 }
diff --git a/drivers/usb-common.c b/drivers/usb-common.c
index a45a621168..d3bc96748b 100644
--- a/drivers/usb-common.c
+++ b/drivers/usb-common.c
@@ -119,6 +119,15 @@ static int match_function_exact(USBDevice_t *hd, void *privdata)
 		return 0;
 	}
 #endif
+#if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+  #ifdef DEBUG_EXACT_MATCH_BUSPORT
+	if (strcmp_null(hd->BusPort, data->BusPort) != 0) {
+		upsdebugx(2, "%s: failed match of %s: %s != %s",
+		    __func__, "BusPort", hd->BusPort, data->BusPort);
+		return 0;
+	}
+  #endif
+#endif
 #ifdef DEBUG_EXACT_MATCH_DEVICE
 	if (strcmp_null(hd->Device, data->Device) != 0) {
 		upsdebugx(2, "%s: failed match of %s: %s != %s",
@@ -300,7 +309,7 @@ static int match_regex_hex(regex_t *preg, int n)
 
 /* private data type: hold a set of compiled regular expressions. */
 typedef struct regex_matcher_data_s {
-	regex_t	*regex[7];
+	regex_t	*regex[USBMATCHER_REGEXP_ARRAY_LIMIT];
 } regex_matcher_data_t;
 
 /* private callback function for regex matches */
@@ -390,6 +399,19 @@ static int match_function_regex(USBDevice_t *hd, void *privdata)
 		    __func__, "Device", hd->Device);
 		return r;
 	}
+
+#if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+	r = match_regex(data->regex[7], hd->BusPort);
+	if (r != 1) {
+/*
+		upsdebugx(2, "%s: failed match of %s: %s !~ %s",
+		    __func__, "Device", hd->Device, data->regex[6]);
+*/
+		upsdebugx(2, "%s: failed match of %s: %s",
+		    __func__, "Bus Port", hd->BusPort);
+		return r;
+	}
+#endif
 	return 1;
 }
 
@@ -426,7 +448,7 @@ int USBNewRegexMatcher(USBDeviceMatcher_t **matcher, char **regex, int cflags)
 	m->privdata = (void *)data;
 	m->next = NULL;
 
-	for (i=0; i<7; i++) {
+	for (i=0; i < USBMATCHER_REGEXP_ARRAY_LIMIT; i++) {
 		r = compile_regex(&data->regex[i], regex[i], cflags);
 		if (r == -2) {
 			r = i+1;
@@ -453,7 +475,7 @@ void USBFreeRegexMatcher(USBDeviceMatcher_t *matcher)
 
 	data = (regex_matcher_data_t *)matcher->privdata;
 
-	for (i = 0; i < 7; i++) {
+	for (i = 0; i < USBMATCHER_REGEXP_ARRAY_LIMIT; i++) {
 		if (!data->regex[i]) {
 			continue;
 		}
diff --git a/drivers/usb-common.h b/drivers/usb-common.h
index a3513adf0d..d1de6d23d5 100644
--- a/drivers/usb-common.h
+++ b/drivers/usb-common.h
@@ -460,6 +460,11 @@
 
 /* USB standard timeout [ms] */
 #define USB_TIMEOUT 5000
+#if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+# define USBMATCHER_REGEXP_ARRAY_LIMIT	8
+#else
+# define USBMATCHER_REGEXP_ARRAY_LIMIT	7
+#endif
 
 /*!
  * USBDevice_t: Describe a USB device. This structure contains exactly
@@ -482,6 +487,9 @@ typedef struct USBDevice_s {
 	char		*Bus;      /*!< Bus name, e.g. "003"  */
 	uint16_t	bcdDevice; /*!< Device release number */
 	char		*Device;   /*!< Device name on the bus, e.g. "001"  */
+#if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+	char		*BusPort;  /*!< Port name, e.g. "001"  */
+#endif
 } USBDevice_t;
 
 /*!
diff --git a/drivers/usbhid-ups.c b/drivers/usbhid-ups.c
index 2074970865..36748c66fb 100644
--- a/drivers/usbhid-ups.c
+++ b/drivers/usbhid-ups.c
@@ -28,7 +28,7 @@
  */
 
 #define DRIVER_NAME	"Generic HID driver"
-#define DRIVER_VERSION	"0.50"
+#define DRIVER_VERSION	"0.51"
 
 #define HU_VAR_WAITBEFORERECONNECT "waitbeforereconnect"
 
@@ -118,7 +118,11 @@ static subdriver_t *subdriver = NULL;
 
 /* Global vars */
 static HIDDevice_t *hd = NULL;
-static HIDDevice_t curDevice = { 0x0000, 0x0000, NULL, NULL, NULL, NULL, 0, NULL };
+static HIDDevice_t curDevice = { 0x0000, 0x0000, NULL, NULL, NULL, NULL, 0, NULL
+#if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+	, NULL
+#endif
+};
 static HIDDeviceMatcher_t *subdriver_matcher = NULL;
 #if !((defined SHUT_MODE) && SHUT_MODE)
 static HIDDeviceMatcher_t *exact_matcher = NULL;
@@ -1023,7 +1027,7 @@ void upsdrv_initups(void)
 
 	subdriver_matcher = device_path;
 #else	/* !SHUT_MODE => USB */
-	char *regex_array[7];
+	char *regex_array[USBMATCHER_REGEXP_ARRAY_LIMIT];
 
 	upsdebugx(1, "upsdrv_initups (non-SHUT)...");
 
@@ -1054,6 +1058,13 @@ void upsdrv_initups(void)
 	regex_array[4] = getval("serial");
 	regex_array[5] = getval("bus");
 	regex_array[6] = getval("device");
+#if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+	regex_array[7] = getval("busport");
+#else
+	if (getval("busport")) {
+		upslogx(LOG_WARNING, "\"busport\" is configured for the device, but is not actually handled by current build combination of NUT and libusb (ignored)");
+	}
+#endif
 
 	ret = USBNewRegexMatcher(&regex_matcher, regex_array, REG_ICASE | REG_EXTENDED);
 	switch(ret)
@@ -1177,6 +1188,9 @@ void upsdrv_cleanup(void)
 	free(curDevice.Serial);
 	free(curDevice.Bus);
 	free(curDevice.Device);
+# if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+	free(curDevice.BusPort);
+# endif
 #endif	/* !SHUT_MODE => USB */
 }
 
diff --git a/m4/nut_check_libusb.m4 b/m4/nut_check_libusb.m4
index 98b0ad0c59..5b042b0790 100644
--- a/m4/nut_check_libusb.m4
+++ b/m4/nut_check_libusb.m4
@@ -286,6 +286,7 @@ if test -z "${nut_have_libusb_seen}"; then
 		nut_have_libusb=no
 	fi
 
+	nut_with_usb_busport=no
 	AS_IF([test "${nut_have_libusb}" = "yes"], [
 		dnl ----------------------------------------------------------------------
 		dnl additional USB-related checks
@@ -318,12 +319,27 @@ if test -z "${nut_have_libusb_seen}"; then
 				]
 		)
 
+		dnl AC_MSG_CHECKING([for libusb bus port support])
+		dnl Per https://github.com/networkupstools/nut/issues/2043#issuecomment-1721856494 :
+		dnl #if defined(LIBUSB_API_VERSION) && (LIBUSB_API_VERSION >= 0x01000102)
+		dnl DEFINE WITH_USB_BUSPORT
+		dnl #endif
+		AC_CHECK_FUNCS(libusb_get_port_number, [nut_with_usb_busport=yes])
+
 		dnl # With USB we can match desired devices by regex;
 		dnl # and currently have no other use for the library:
 		AC_SEARCH_LIBS(regcomp, regex)
 	])
 	AC_LANG_POP([C])
 
+	AS_IF([test x"${nut_with_usb_busport}" = xyes], [
+		AC_DEFINE(WITH_USB_BUSPORT, 1,
+			[Define to 1 for libusb versions where we can support "busport" USB matching value.])
+	], [
+		AC_DEFINE(WITH_USB_BUSPORT, 0,
+			[Define to 1 for libusb versions where we can support "busport" USB matching value.])
+	])
+
 	AS_IF([test "${nut_have_libusb}" = "yes"], [
 		LIBUSB_CFLAGS="${CFLAGS}"
 		LIBUSB_LIBS="${LIBS}"
diff --git a/scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in b/scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in
index b237c03423..2d2c126dbb 100755
--- a/scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in
+++ b/scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in
@@ -490,7 +490,7 @@ upsconf_getDriverMedia() {
                     printf '%s\n%s\n' "$CURR_DRV" "usb" ; return ;;
                 /dev/*)
                     # See drivers/nutdrv_qx.c :: upsdrv_initups() for a list
-                    if [ -n "`upsconf_getValue "$1" 'subdriver' 'vendorid' 'productid' 'vendor' 'product' 'serial' 'bus' 'langid_fix'`" ] \
+                    if [ -n "`upsconf_getValue "$1" 'subdriver' 'vendorid' 'productid' 'vendor' 'product' 'serial' 'bus' 'busport' 'langid_fix'`" ] \
                     ; then
                         printf '%s\n%s\n' "$CURR_DRV" "usb" ; return
                     else
diff --git a/tools/nut-scanner/scan_usb.c b/tools/nut-scanner/scan_usb.c
index 2a8c116bfe..a56c54cf8a 100644
--- a/tools/nut-scanner/scan_usb.c
+++ b/tools/nut-scanner/scan_usb.c
@@ -54,6 +54,7 @@ static int (*nut_usb_get_string_simple)(libusb_device_handle *dev, int index,
  static void (*nut_usb_free_device_list)(libusb_device **list, int unref_devices);
  static uint8_t (*nut_usb_get_bus_number)(libusb_device *dev);
  static uint8_t (*nut_usb_get_device_address)(libusb_device *dev);
+ static uint8_t (*nut_usb_get_port_number)(libusb_device *dev);
  static int (*nut_usb_get_device_descriptor)(libusb_device *dev,
 	struct libusb_device_descriptor *desc);
 #else /* => WITH_LIBUSB_0_1 */
@@ -157,6 +158,20 @@ int nutscan_load_usb_library(const char *libname_path)
 			goto err;
 	}
 
+	/* This method may be absent in some libusb versions, and we should
+	 * tolerate that! In run-time driver code see also blocks fenced by:
+	 *   #if (defined WITH_USB_BUSPORT) && (WITH_USB_BUSPORT)
+	 */
+	*(void **) (&nut_usb_get_port_number) = lt_dlsym(dl_handle,
+					"libusb_get_port_number");
+	if ((dl_error = lt_dlerror()) != NULL) {
+			fprintf(stderr,
+				"While loading USB library (%s), failed to find libusb_get_port_number() : %s. "
+				"The \"busport\" USB matching option will be disabled.\n",
+				libname_path, dl_error);
+			nut_usb_get_port_number = NULL;
+	}
+
 	*(void **) (&nut_usb_get_device_descriptor) = lt_dlsym(dl_handle,
 					"libusb_get_device_descriptor");
 	if ((dl_error = lt_dlerror()) != NULL) {
@@ -251,7 +266,8 @@ nutscan_device_t * nutscan_scan_usb()
 	/* device_port physical meaning: connection port on that bus;
 	 *   different consumers plugged into same socket should have
 	 *   the same port value. However in practice such functionality
-	 *   depends on platform and HW involved.
+	 *   depends on platform and HW involved and may mean logical
+	 *   enumeration results.
 	 * In libusb1 API: first libusb_get_port_numbers() earlier known
 	 *    as libusb_get_port_path() for physical port number on the bus, see
 	 *    https://libusb.sourceforge.io/api-1.0/group__libusb__dev.html#ga14879a0ea7daccdcddb68852d86c00c4
@@ -267,6 +283,12 @@ nutscan_device_t * nutscan_scan_usb()
 	libusb_device *dev;
 	libusb_device **devlist;
 	uint8_t bus_num;
+	/* Sort of like device_port above, but different (should be
+	 * more closely about physical port number than logical device
+	 * enumeration results). Uses libusb_get_port_number() where
+	 * available in libusb (and hoping the OS and HW honour it).
+	 */
+	char *bus_port = NULL;
 #else  /* => WITH_LIBUSB_0_1 */
 	struct usb_device *dev;
 	struct usb_bus *bus;
@@ -339,6 +361,22 @@ nutscan_device_t * nutscan_scan_usb()
 			}
 		}
 
+		if (nut_usb_get_port_number != NULL) {
+			bus_port = (char *)malloc(4);
+			if (bus_port == NULL) {
+				(*nut_usb_free_device_list)(devlist, 1);
+				(*nut_usb_exit)(NULL);
+				fatal_with_errno(EXIT_FAILURE, "Out of memory");
+			} else {
+				uint8_t port_num = (*nut_usb_get_port_number)(dev);
+				if (port_num > 0) {
+					snprintf(bus_port, 4, "%03d", port_num);
+				} else {
+					snprintf(bus_port, 4, ".*");
+				}
+			}
+		}
+
 		bcdDevice = dev_desc.bcdDevice;
 #else  /* => WITH_LIBUSB_0_1 */
 # ifndef WIN32
@@ -367,8 +405,8 @@ nutscan_device_t * nutscan_scan_usb()
 				ret = (*nut_usb_open)(dev, &udev);
 				if (!udev || ret != LIBUSB_SUCCESS) {
 					fprintf(stderr, "Failed to open device "
-						"bus '%s' device/port '%s', skipping: %s\n",
-						busname, device_port,
+						"bus '%s' device/port '%s' bus/port '%s', skipping: %s\n",
+						busname, device_port, bus_port,
 						(*nut_usb_strerror)(ret));
 
 					/* Note: closing is not applicable
@@ -379,6 +417,10 @@ nutscan_device_t * nutscan_scan_usb()
 
 					free(busname);
 					free(device_port);
+					if (bus_port != NULL) {
+						free(bus_port);
+						bus_port = NULL;
+					}
 
 					continue;
 				}
@@ -405,6 +447,10 @@ nutscan_device_t * nutscan_scan_usb()
 #if WITH_LIBUSB_1_0
 							free(busname);
 							free(device_port);
+							if (bus_port != NULL) {
+								free(bus_port);
+								bus_port = NULL;
+							}
 							(*nut_usb_free_device_list)(devlist, 1);
 							(*nut_usb_exit)(NULL);
 #endif	/* WITH_LIBUSB_1_0 */
@@ -425,6 +471,10 @@ nutscan_device_t * nutscan_scan_usb()
 #if WITH_LIBUSB_1_0
 							free(busname);
 							free(device_port);
+							if (bus_port != NULL) {
+								free(bus_port);
+								bus_port = NULL;
+							}
 							(*nut_usb_free_device_list)(devlist, 1);
 							(*nut_usb_exit)(NULL);
 #endif	/* WITH_LIBUSB_1_0 */
@@ -446,6 +496,10 @@ nutscan_device_t * nutscan_scan_usb()
 #if WITH_LIBUSB_1_0
 							free(busname);
 							free(device_port);
+							if (bus_port != NULL) {
+								free(bus_port);
+								bus_port = NULL;
+							}
 							(*nut_usb_free_device_list)(devlist, 1);
 							(*nut_usb_exit)(NULL);
 #endif	/* WITH_LIBUSB_1_0 */
@@ -466,6 +520,10 @@ nutscan_device_t * nutscan_scan_usb()
 #if WITH_LIBUSB_1_0
 					free(busname);
 					free(device_port);
+					if (bus_port != NULL) {
+						free(bus_port);
+						bus_port = NULL;
+					}
 					(*nut_usb_free_device_list)(devlist, 1);
 					(*nut_usb_exit)(NULL);
 #endif	/* WITH_LIBUSB_1_0 */
@@ -520,6 +578,16 @@ nutscan_device_t * nutscan_scan_usb()
 					"device",
 					device_port);
 
+#if WITH_LIBUSB_1_0
+				if (bus_port) {
+					nutscan_add_option_to_device(nut_dev,
+						"busport",
+						bus_port);
+					free(bus_port);
+					bus_port = NULL;
+				}
+#endif	/* WITH_LIBUSB_1_0 */
+
 				/* Not currently matched by drivers, hence commented for now: */
 				sprintf(string, "%04X", bcdDevice);
 				nutscan_add_option_to_device(nut_dev,
@@ -540,6 +608,10 @@ nutscan_device_t * nutscan_scan_usb()
 #else	/* not WITH_LIBUSB_0_1 */
 		free(busname);
 		free(device_port);
+		if (bus_port != NULL) {
+			free(bus_port);
+			bus_port = NULL;
+		}
 	}
 
 	(*nut_usb_free_device_list)(devlist, 1);