Sharing of ECU traces #5

jglim · 2020-12-17T04:51:54Z

jglim
Dec 17, 2020
Maintainer

Hi folks,

This is a thread to aggregate shared ECU traces.

Since everyone may have their own setup, there is no strict format required. For example, traces from Vediamo, ISO-TP, J2534 transactions, raw CAN frames are all welcome.
The trace should preferably indicate the ECU name, ECU variant and file name.

If you wish to add comments, timestamps to the log (e.g. describes what you are doing) that is OK too.
If the file is large, you can also upload it in a text file.

For examples, take a look at..
- @N0cynym : Raw CAN frames + Diogenes log, VGSNAG2 (VCD_SCN_Variantencodierung_VGS_73) : #1 (reply in thread)
- @Feezex : Vediamo trace, EZS906 (NCV3_0301) : #1 (comment)

Thanks again for all your effort!

jglim · 2020-12-17T04:54:34Z

jglim
Dec 17, 2020
Maintainer Author

Here is my example:

ECU: CRD3 (CRD3.CBF)
Variant: CRD3_Diag_2131h
Capture level: J2534 (DLL)
Action: Variant coding, change start-stop strategy to "Stopp-Start Standard Logik, Last Mode"

(Edit: 7F on write means that the action was unsuccessful, the mistake here was that I only elevated access levels to 0x9, but 0xB is required to write)

// request session 
(UDS: Diagnostic Session Control)
W 00 00 07 E0 10 03 
W 00 00 07 E0 10 03 

// session start : time remaining	
(UDS: Diagnostic Session Control)
R 00 00 07 E0                   
R 00 00 07 E8 50 03 00 14 00 C8 

// DT_STO_ID_Aktive_Diagnose_Information_Session_Type	
(UDS:  	Read Data By Identifier)
W 00 00 07 E0   22 F1 00  
W 00 00 07 E0   22 F1 00  

// variant: 139569 : 0x22131 (02 21 31) 
(UDS:  	Read Data By Identifier)
R 00 00 07 E0                       
R 00 00 07 E8 62 F1 00 02 21 31 03  

// 	DT_STO_ID_Hardware_Lieferant_Information
(UDS:  	Read Data By Identifier)
W 00 00 07 E0 22 F1 54 
W 00 00 07 E0 22 F1 54 

// hardware info
(UDS:  	Read Data By Identifier)
R 00 00 07 E0                 
R 00 00 07 E8 62 F1 54 00 40  

(UDS: Tester Present )
W 00 00 07 E0 3E 00  
W 00 00 07 E0 3E 00  
R 00 00 07 E0        
R 00 00 07 E8 7E 00  
W 00 00 07 E0 3E 00  
W 00 00 07 E0 3E 00  
R 00 00 07 E0        
R 00 00 07 E8 7E 00  
W 00 00 07 E0 3E 00  
W 00 00 07 E0 3E 00  
R 00 00 07 E0        
R 00 00 07 E8 7E 00  

// elevate to level 9
(UDS: Security Access)
W 00 00 07 E0 27 09                           
W 00 00 07 E0 27 09                           
R 00 00 07 E0                                 
R 00 00 07 E8                                 
R 00 00 07 E8 67 09 50 FA 0E A4 A0 F0 AE 0A   
W 00 00 07 E0 27 0A 9F 67 43 D3               
W 00 00 07 E0 27 0A 9F 67 43 D3               
R 00 00 07 E0                                 
R 00 00 07 E8 67 0A                           

(UDS: Tester Present )
W 00 00 07 E0 3E 00  
W 00 00 07 E0 3E 00  
R 00 00 07 E0        
R 00 00 07 E8 7E 00  

// 	DT_RVC_CRD3_explizit_restricted_30Byte
(UDS: Read Data By Identifier)
W 00 00 07 E0 22 10 02  
W 00 00 07 E0 22 10 02  
R 00 00 07 E0           
R 00 00 07 E8           
R 00 00 07 E8 62 10 02 00 00 00 00 10 00 00 00 10 10 21 40 AF 8C E0 24 58 91 59 98 56 20 49 47 7D 00 E5 00 36 36 00 40 33 10

(UDS: Tester Present )
W 00 00 07 E0 3E 00 
W 00 00 07 E0 3E 00 
R 00 00 07 E0       
R 00 00 07 E8 7E 00 
W 00 00 07 E0 3E 00 
W 00 00 07 E0 3E 00 
R 00 00 07 E0       
R 00 00 07 E8 7E 00 
W 00 00 07 E0 3E 00 
W 00 00 07 E0 3E 00 
R 00 00 07 E0       
R 00 00 07 E8 7E 00 
W 00 00 07 E0 3E 00 
W 00 00 07 E0 3E 00 
R 00 00 07 E0       
R 00 00 07 E8 7E 00 

// WVC 30bytes , change start-stop strategy
(UDS:  	Write Data By Identifier )
W 00 00 07 E0 2E 10 02 00 80 00 00 10 00 00 00 10 10 21 40 AF 8C E0 24 58 91 59 98 56 20 49 47 7D 00 E5 00 36 36 00 00 00 01
W 00 00 07 E0 2E 10 02 00 80 00 00 10 00 00 00 10 10 21 40 AF 8C E0 24 58 91 59 98 56 20 49 47 7D 00 E5 00 36 36 00 00 00 01
R 00 00 07 E0                                     
R 00 00 07 E8 7F 2E 33                            

(UDS: Tester Present )
W 00 00 07 E0 3E 00  
W 00 00 07 E0 3E 00  
R 00 00 07 E0        
R 00 00 07 E8 7E 00

0 replies

N0cynym · 2020-12-18T07:18:20Z

N0cynym
Dec 18, 2020

UDS Initiate Contact

Here I will show some tests where UDS assist does not automaticly send DT_STO_Aktive_Diagnose_Information_Version 0x22F100 to detect variant like it's working here

Diogenes

Initializing new connection to AVDI-PT 174███ using C:\Program Files (x86)\ABRITES software for ID 17453E\PassThru\AbrPT32.dll

EIS_212

Variant: W212_1100
Action: Initiate Contact → UDS assist [YES]
Switching session states.. Send: 10 03 (Request: Diagnostic Session Control) Failed to switch session : target responded with

ID	Data
0612	02 10 03 00 00 00 00 00
0482	06 50 03 00 14 00 C8 00

Diogenes does only send SES_Extended

Variant: W212_1003
Action: Initiate Contact → UDS assist [YES] → EIS_212 Diagnostics: Stored Data DT_STO_ID_Aktive_Diagnose_Information_Version
Switching session states.. Send: 10 03 (Request: Diagnostic Session Control) Failed to switch session : target responded with

ID	Data
0612	02 10 03 00 00 00 00 00
0482	06 50 03 00 14 00 C8 00
0612	02 3E 00 00 00 00 00 00
0482	02 7E 00 00 00 00 00 00
0612	02 3E 00 00 00 00 00 00
0482	02 7E 00 00 00 00 00 00
0612	03 22 F1 00 00 00 00 00
0482	07 62 F1 00 00 10 03 03

Diogenes does only send SES_Extended I still selected DT_STO_ID_Aktive_Diagnose_Information_Version manuel

DTS Monaco 8.14

EIS_212

Variant: W212_1100
Action: ECUIdentification [Read] HMI and Connect withDtcControlEx HMI

ID	Data
0612	02 10 03 55 55 55 55 55
0612	02 10 03 55 55 55 55 55
0482	06 50 03 00 14 00 C8 00
0612	03 22 F1 00 55 55 55 55
0482	07 62 F1 00 00 11 00 03
0612	03 22 F1 54 55 55 55 55
0482	05 62 F1 54 00 07 00 00
0612	03 22 F1 51 55 55 55 55
0482	06 62 F1 51 09 06 01 00

DTS send SES_Extended 0x1003, DT_STO_ID_Aktive_Diagnose_Information_Version 0x22F100, DT_STO_ID_Hardware 0x22F154, DT_STO_ID_Software 0x22F151 with both HMIs (same trace)

Variant: W212_1003
Action: ECUIdentification [Read] HMI and Connect withDtcControlEx HMI

Like the trace ahead

I still edit this post with more examples and excuse me for my english bugs...

20 replies

jglim Dec 23, 2020
Maintainer Author

Got it, I am actively trying to find out the reason, I hope to get your J2534 device working too.

I noticed something unusual about EIS: Normally, the receiving CAN identifier of an ECU is the transmit identifier + 8, see this example:

However EIS receive addresses do not seem to follow the standard. This may mean that the ISO15765 standard filter is automatically removing the received data

I have made a special testing build for you again, could you see if this fixes the issue?

CaesarSuite_dbg_2020-12-23.zip

N0cynym Dec 23, 2020

Oh sure but there are many other ecus they do not follow this standard.
For example brake ecu ABR2XT:
CP_REQUEST_CANIDENTIFIER: 1586 (0x632)
CP_RESPONSE_CANIDENTIFIER: 1158 (0x486)

Or electric steering EPS212:
CP_REQUEST_CANIDENTIFIER: 1714(0x6B2)
CP_RESPONSE_CANIDENTIFIER: 1174 (0x496)

jglim Dec 23, 2020
Maintainer Author

Thanks for checking. In the above testing build, I have re-implemented the filter configuration to account for non-standard response CAN identifiers, so if it works for EIS* modules, it should automatically work for others (e.g. ABR2XT, EPS212) without any changes.

N0cynym Dec 23, 2020

I tested and after pressing initiate again the variant was detected.
Well done! Hope we find it out in my logs why it detects after second try...

Now the logs...

Trace

Time	ID	Data
34938.849	0612	02 3E 00 00 00 00 00 00
36181.910	0612	02 10 03 00 00 00 00 00
36183.464	0482	06 50 03 00 14 00 C8 00
36516.773	0612	03 22 F1 00 00 00 00 00
36533.404	0482	07 62 F1 00 00 00 12 03
38709.764	0612	02 3E 00 00 00 00 00 00
38712.911	0482	02 7E 00 00 00 00 00 00
40897.918	0612	02 3E 00 00 00 00 00 00
40902.444	0482	02 7E 00 00 00 00 00 00
43085.929	0612	02 3E 00 00 00 00 00 00
43091.984	0482	02 7E 00 00 00 00 00 00
45272.031	0612	02 3E 00 00 00 00 00 00
45281.485	0482	02 7E 00 00 00 00 00 00
47278.973	0612	02 3E 00 00 00 00 00 00
47281.252	0482	02 7E 00 00 00 00 00 00
49291.509	0612	02 3E 00 00 00 00 00 00
49301.029	0482	02 7E 00 00 00 00 00 00
51303.796	0612	02 3E 00 00 00 00 00 00
51310.783	0482	02 7E 00 00 00 00 00 00
53317.132	0612	02 3E 00 00 00 00 00 00
53320.508	0482	02 7E 00 00 00 00 00 00
54026.027	0612	02 10 03 00 00 00 00 00
54030.352	0482	06 50 03 00 14 00 C8 00
54048.074	0612	03 22 F1 00 00 00 00 00
54060.304	0482	07 62 F1 00 00 00 12 03
56062.454	0612	02 3E 00 00 00 00 00 00
56070.217	0482	02 7E 00 00 00 00 00 00
58077.436	0612	02 3E 00 00 00 00 00 00
58079.874	0482	02 7E 00 00 00 00 00 00
60088.052	0612	02 3E 00 00 00 00 00 00
60089.636	0482	02 7E 00 00 00 00 00 00

TxtLog

Attempting to open a connection to (EIS_204) with profile 'HSCAN_UDS_500'
Target voltage : 13000 mV
CAN Identifier: 00000612
Switching session states..
Send: [10 03] (Request: Diagnostic Session Control)
[!] Retrying: empty buffer: BUFFER_EMPTY for request 1003
[!] Retrying: empty buffer: BUFFER_EMPTY for request 1003
[!] Retrying: empty buffer: BUFFER_EMPTY for request 1003
[!] Retrying: empty buffer: BUFFER_EMPTY for request 1003
[!] Retrying: empty buffer: BUFFER_EMPTY for request 1003
[!] Retrying: empty buffer: BUFFER_EMPTY for request 1003
[!] Retrying: empty buffer: BUFFER_EMPTY for request 1003
[!] Retrying: empty buffer: BUFFER_EMPTY for request 1003
[!] Retrying: empty buffer: BUFFER_EMPTY for request 1003
[!] Internally timed out: 10 03
Failed to switch session : target responded with []
[!] Retrying: empty buffer: BUFFER_EMPTY for request 3E00
[!] Retrying: empty buffer: BUFFER_EMPTY for request 3E00
[!] Retrying: empty buffer: BUFFER_EMPTY for request 3E00
[!] Retrying: empty buffer: BUFFER_EMPTY for request 3E00
[!] Retrying: empty buffer: BUFFER_EMPTY for request 3E00
[!] Retrying: empty buffer: BUFFER_EMPTY for request 3E00
[!] Retrying: empty buffer: BUFFER_EMPTY for request 3E00
[!] Retrying: empty buffer: BUFFER_EMPTY for request 3E00
[!] Retrying: empty buffer: BUFFER_EMPTY for request 3E00
[!] Internally timed out: 3E 00
Attempting to open a connection to (EIS_204) with profile 'HSCAN_UDS_500'
Target voltage : 13000 mV
CAN Identifier: 00000612
Switching session states..
Send: [10 03] (Request: Diagnostic Session Control)
Receive: [50 03 00 14 00 C8] (Response: Diagnostic Session Control)
Querying variant..
Send: [22 F1 00] (Request: Read Data By Identifier)
Receive: [62 F1 00 00 00 12 03] (Response: Read Data By Identifier)
Variant has been successfully configured as W204_0012

Shim log

0.000s ++ PTOpen(NULL, 0x080AED18)
returning DeviceID: 1
5.173s 0:STATUS_NOERROR
5.176s ** PTReadVersion(1, 0x081A6E90, 0x081A6F98, 0x077FE460)
Firmware: 03.22@V91XG00441
DLL: 02.60
API: 04.04
5.176s 0:STATUS_NOERROR
9.689s ++ PTConnect(1, 6:ISO15765, 0x00000800, 500000, 0x080AED88)
Flags: 11:CAN_ID_BOTH
returning ChannelID: 65542
9.742s 0:STATUS_NOERROR
9.745s ** PTIoctl(1, 3:READ_VBATT, 0x00000000, 0x080AED88)
13.000000 Volts
9.746s 0:STATUS_NOERROR
9.751s ++ PTStartMsgFilter(65542, 3:FLOW_CONTROL_FILTER, 0x081F4CE0, 0x081F5DE8, 0x0BA90128, 0x080AED88)
Mask[ 0] 6:ISO15765. 4 bytes. TxF=0x00000040
TxFlags: 6:ISO15765_FRAME_PAD
__ ff ff ff ff
Pattern[ 0] 6:ISO15765. 4 bytes. TxF=0x00000040
TxFlags: 6:ISO15765_FRAME_PAD
__ 00 00 04 82
FlowControl[ 0] 6:ISO15765. 4 bytes. TxF=0x00000040
TxFlags: 6:ISO15765_FRAME_PAD
__ 00 00 06 12
returning FilterID: 1
9.765s 0:STATUS_NOERROR
9.767s ** PTIoctl(65542, 2:SET_CONFIG, 0x0787BBB8, 0x00000000)
3 parameter(s) at 0x0787BBC0:
35:STMIN_TX = 20
31:ISO15765_STMIN = 20
30:ISO15765_BS = 8
9.773s 0:STATUS_NOERROR
9.774s ** PTIoctl(65542, 8:CLEAR_RX_BUFFER, 0x00000000, 0x00000000)
9.775s 0:STATUS_NOERROR
9.775s ** PTIoctl(65542, 7:CLEAR_TX_BUFFER, 0x00000000, 0x00000000)
9.777s 0:STATUS_NOERROR
10.080s >> PTWriteMsgs(65542, 0x05600024, 0x05600020, 100)
Msg[ 0] 6:ISO15765. 6 bytes. TxF=0x00000040
TxFlags: 6:ISO15765_FRAME_PAD
__ 00 00 06 12 3e 00
sent 1 of 1 messages
10.083s 0:STATUS_NOERROR
10.084s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
10.394s 16:ERR_BUFFER_EMPTY
10.395s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
10.704s 16:ERR_BUFFER_EMPTY
10.704s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
11.014s 16:ERR_BUFFER_EMPTY
11.014s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
11.316s 16:ERR_BUFFER_EMPTY
11.316s >> PTWriteMsgs(65542, 0x05600024, 0x05600020, 100)
Msg[ 0] 6:ISO15765. 6 bytes. TxF=0x00000040
TxFlags: 6:ISO15765_FRAME_PAD
__ 00 00 06 12 10 03
sent 1 of 1 messages
11.320s 0:STATUS_NOERROR
11.320s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 1 of 1 messages
Msg[ 0] 0.000000s. 6:ISO15765. Actual data 0 of 4 bytes. RxS=0x00000009
RxStatus: 0:TX_MSG_TYPE 3:TX_INDICATION
__ [00] [00] [06] [12]
11.340s 0:STATUS_NOERROR
11.341s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 1 of 1 messages
Msg[ 0] 0.016190s. 6:ISO15765. Actual data 10 of 10 bytes. RxS=0x00000000
__ 00 00 04 82 50 03 00 14 00 c8
11.341s 0:STATUS_NOERROR
11.341s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
11.651s 16:ERR_BUFFER_EMPTY
11.651s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
11.961s 16:ERR_BUFFER_EMPTY
11.961s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
12.271s 16:ERR_BUFFER_EMPTY
12.271s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
12.581s 16:ERR_BUFFER_EMPTY
12.582s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
12.892s 16:ERR_BUFFER_EMPTY
12.892s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
13.202s 16:ERR_BUFFER_EMPTY
13.202s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
13.512s 16:ERR_BUFFER_EMPTY
13.512s >> PTWriteMsgs(65542, 0x05600024, 0x05600020, 100)
Msg[ 0] 6:ISO15765. 6 bytes. TxF=0x00000040
TxFlags: 6:ISO15765_FRAME_PAD
__ 00 00 06 12 3e 00
sent 1 of 1 messages
13.515s 0:STATUS_NOERROR
13.515s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 1 of 1 messages
Msg[ 0] 0.000000s. 6:ISO15765. Actual data 0 of 4 bytes. RxS=0x00000009
RxStatus: 0:TX_MSG_TYPE 3:TX_INDICATION
__ [00] [00] [06] [12]
13.535s 0:STATUS_NOERROR
13.535s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 1 of 1 messages
Msg[ 0] 0.038086s. 6:ISO15765. Actual data 6 of 6 bytes. RxS=0x00000000
__ 00 00 04 82 7e 00
13.535s 0:STATUS_NOERROR
13.536s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
13.846s 16:ERR_BUFFER_EMPTY
13.846s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
14.156s 16:ERR_BUFFER_EMPTY
14.156s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
14.466s 16:ERR_BUFFER_EMPTY
14.466s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
14.776s 16:ERR_BUFFER_EMPTY
14.776s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
15.077s 16:ERR_BUFFER_EMPTY
15.077s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
15.387s 16:ERR_BUFFER_EMPTY
15.387s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
15.697s 16:ERR_BUFFER_EMPTY
15.697s >> PTWriteMsgs(65542, 0x05600024, 0x05600020, 100)
Msg[ 0] 6:ISO15765. 6 bytes. TxF=0x00000040
TxFlags: 6:ISO15765_FRAME_PAD
__ 00 00 06 12 3e 00
sent 1 of 1 messages
15.700s 0:STATUS_NOERROR
15.700s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 1 of 1 messages
Msg[ 0] 0.016190s. 6:ISO15765. Actual data 0 of 4 bytes. RxS=0x00000009
RxStatus: 0:TX_MSG_TYPE 3:TX_INDICATION
__ [00] [00] [06] [12]
15.720s 0:STATUS_NOERROR
15.725s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 1 of 1 messages
Msg[ 0] 0.059983s. 6:ISO15765. Actual data 6 of 6 bytes. RxS=0x00000000
__ 00 00 04 82 7e 00
15.725s 0:STATUS_NOERROR
15.725s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
16.034s 16:ERR_BUFFER_EMPTY
16.034s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
16.344s 16:ERR_BUFFER_EMPTY
16.344s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
16.654s 16:ERR_BUFFER_EMPTY
16.654s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
16.964s 16:ERR_BUFFER_EMPTY
16.964s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
17.266s 16:ERR_BUFFER_EMPTY
17.266s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
17.576s 16:ERR_BUFFER_EMPTY
17.576s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
17.886s 16:ERR_BUFFER_EMPTY
17.886s >> PTWriteMsgs(65542, 0x05600024, 0x05600020, 100)
Msg[ 0] 6:ISO15765. 6 bytes. TxF=0x00000040
TxFlags: 6:ISO15765_FRAME_PAD
__ 00 00 06 12 3e 00
sent 1 of 1 messages
17.889s 0:STATUS_NOERROR
17.889s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 1 of 1 messages
Msg[ 0] 0.038086s. 6:ISO15765. Actual data 0 of 4 bytes. RxS=0x00000009
RxStatus: 0:TX_MSG_TYPE 3:TX_INDICATION
__ [00] [00] [06] [12]
17.909s 0:STATUS_NOERROR
17.909s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 1 of 1 messages
Msg[ 0] 0.081877s. 6:ISO15765. Actual data 6 of 6 bytes. RxS=0x00000000
__ 00 00 04 82 7e 00
17.909s 0:STATUS_NOERROR
17.909s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
18.219s 16:ERR_BUFFER_EMPTY
18.219s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
18.529s 16:ERR_BUFFER_EMPTY
18.529s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
18.839s 16:ERR_BUFFER_EMPTY
18.839s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
19.140s 16:ERR_BUFFER_EMPTY
19.140s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
19.442s 16:ERR_BUFFER_EMPTY
19.442s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
19.752s 16:ERR_BUFFER_EMPTY
19.752s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
20.062s 16:ERR_BUFFER_EMPTY
20.062s >> PTWriteMsgs(65542, 0x05600024, 0x05600020, 100)
Msg[ 0] 6:ISO15765. 6 bytes. TxF=0x00000040
TxFlags: 6:ISO15765_FRAME_PAD
__ 00 00 06 12 3e 00
sent 1 of 1 messages
20.065s 0:STATUS_NOERROR
20.065s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 1 of 1 messages
Msg[ 0] 0.059983s. 6:ISO15765. Actual data 0 of 4 bytes. RxS=0x00000009
RxStatus: 0:TX_MSG_TYPE 3:TX_INDICATION
__ [00] [00] [06] [12]
20.086s 0:STATUS_NOERROR
20.095s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 1 of 1 messages
Msg[ 0] 0.103573s. 6:ISO15765. Actual data 6 of 6 bytes. RxS=0x00000000
__ 00 00 04 82 7e 00
20.095s 0:STATUS_NOERROR
20.096s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
20.396s 16:ERR_BUFFER_EMPTY
20.396s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
20.706s 16:ERR_BUFFER_EMPTY
20.706s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
21.006s 16:ERR_BUFFER_EMPTY
21.006s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
21.309s 16:ERR_BUFFER_EMPTY
21.309s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
21.619s 16:ERR_BUFFER_EMPTY
21.619s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
21.929s 16:ERR_BUFFER_EMPTY
21.929s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
22.239s 16:ERR_BUFFER_EMPTY
22.239s >> PTWriteMsgs(65542, 0x05600024, 0x05600020, 100)
Msg[ 0] 6:ISO15765. 6 bytes. TxF=0x00000040
TxFlags: 6:ISO15765_FRAME_PAD
__ 00 00 06 12 3e 00
sent 1 of 1 messages
22.242s 0:STATUS_NOERROR
22.242s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 1 of 1 messages
Msg[ 0] 0.081877s. 6:ISO15765. Actual data 0 of 4 bytes. RxS=0x00000009
RxStatus: 0:TX_MSG_TYPE 3:TX_INDICATION
__ [00] [00] [06] [12]
22.262s 0:STATUS_NOERROR
22.262s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 1 of 1 messages
Msg[ 0] 0.125368s. 6:ISO15765. Actual data 6 of 6 bytes. RxS=0x00000000
__ 00 00 04 82 7e 00
22.262s 0:STATUS_NOERROR
22.263s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
22.572s 16:ERR_BUFFER_EMPTY
22.572s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
22.882s 16:ERR_BUFFER_EMPTY
22.882s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
23.192s 16:ERR_BUFFER_EMPTY
23.192s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
23.502s 16:ERR_BUFFER_EMPTY
23.502s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
23.812s 16:ERR_BUFFER_EMPTY
23.812s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
24.122s 16:ERR_BUFFER_EMPTY
24.122s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
24.432s 16:ERR_BUFFER_EMPTY
24.432s >> PTWriteMsgs(65542, 0x05600024, 0x05600020, 100)
Msg[ 0] 6:ISO15765. 6 bytes. TxF=0x00000040
TxFlags: 6:ISO15765_FRAME_PAD
__ 00 00 06 12 3e 00
sent 1 of 1 messages
24.435s 0:STATUS_NOERROR
24.435s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 1 of 1 messages
Msg[ 0] 0.103573s. 6:ISO15765. Actual data 0 of 4 bytes. RxS=0x00000009
RxStatus: 0:TX_MSG_TYPE 3:TX_INDICATION
__ [00] [00] [06] [12]
24.455s 0:STATUS_NOERROR
24.456s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 1 of 1 messages
Msg[ 0] 0.147264s. 6:ISO15765. Actual data 6 of 6 bytes. RxS=0x00000000
__ 00 00 04 82 7e 00
24.456s 0:STATUS_NOERROR
24.457s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
24.766s 16:ERR_BUFFER_EMPTY
24.766s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
25.067s 16:ERR_BUFFER_EMPTY
25.067s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
25.377s 16:ERR_BUFFER_EMPTY
25.377s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
25.678s 16:ERR_BUFFER_EMPTY
25.678s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
25.988s 16:ERR_BUFFER_EMPTY
25.988s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
26.298s 16:ERR_BUFFER_EMPTY
26.298s << PTReadMsgs(65542, 0x05600024, 0x05600020, 300)
read 0 of 1 messages
26.608s 16:ERR_BUFFER_EMPTY
26.609s >> PTWriteMsgs(65542, 0x05600024, 0x05600020, 100)
Msg[ 0] 6:ISO15765. 6 bytes. TxF=0x00000040
TxFlags: 6:ISO15765_FRAME_PAD
__ 00 00 06 12 3e 00
sent 1 of 1 messages

jglim Dec 24, 2020
Maintainer Author

Nice!

I have looked through the logs and there isn't anything that appears particularly wrong. There might be an problem with the order of actions when the connection is initialized, so Diogenes will now attempt to configure the filter twice. It does not seem to have any side effects, so maybe this might fix the issue at hand.

Version v1.4.2 is available now with the above changes; hopefully that solves the double-connect issue.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Sharing of ECU traces #5

{{title}}

Replies: 2 comments 20 replies

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

Select a reply

Sharing of ECU traces #5

jglim Dec 17, 2020 Maintainer

Replies: 2 comments · 20 replies

jglim Dec 17, 2020 Maintainer Author

N0cynym Dec 18, 2020

UDS Initiate Contact

Diogenes

EIS_212

DTS Monaco 8.14

EIS_212

jglim Dec 23, 2020 Maintainer Author

N0cynym Dec 23, 2020

jglim Dec 23, 2020 Maintainer Author

N0cynym Dec 23, 2020

Now the logs...

Trace

TxtLog

Shim log

jglim Dec 24, 2020 Maintainer Author

jglim
Dec 17, 2020
Maintainer

Replies: 2 comments 20 replies

jglim
Dec 17, 2020
Maintainer Author

N0cynym
Dec 18, 2020

jglim Dec 23, 2020
Maintainer Author

jglim Dec 23, 2020
Maintainer Author

jglim Dec 24, 2020
Maintainer Author