Skip to content

Latest commit

 

History

History
92 lines (64 loc) · 3.44 KB

Arduino.md

File metadata and controls

92 lines (64 loc) · 3.44 KB
Raw

Hardware

Requirements

  • Ethernet link
  • Arduino/Genuino IDE
  • Arduino/Genuino UNO board
  • Arduino ISP and SD-card (any size >= 10 MB)
  • WizNet-compatible Ethernet shield (with SD reader)
  • MMA7361 Accelerometer
  • Arduino/Genuino IDE libraries: PubSubClient
    • Open Include Libraries from Sketch menu, and choose Manage Libraries
    • Type PubSubClient into search bar, then install it by clicking on Install button below
    • Close window
  • (optional) 3 LEDs (red-green-yellow) with 3 resistors

We recommend to buy Arduinos on official website https://store.arduino.cc

Tested with Arduino/Genuino IDE 1.8.1 and PubSubClient 2.6

Step 1: Burning a new bootloader with Arduino ISP for self-upgrade

In order to self-upgrade itself, Arduino must use an SD-card and a custom bootloader.

Please note that, with avr_boot bootloader, you'll not be able to debug/upload sketch using standard method. To restore old bootloader, follow these instructions except for 10, when you have to choose Arduino/Genuino Uno as board (then proceed with 11).

Steps:

  1. Unplug all hardware from Arduino Uno
  2. Plug the ArduinoISP into ICSP 6-pin-header of Arduino Uno (you can find ICSP header on the left side, having USB port on right side)
  3. Power up Arduino Uno with a power supply (either with USB port or power jack port)
  4. Plug ArduinoISP to PC (with microUSB port on ArduinoISP)
  5. Open Arduino IDE (on Linux you may need to open it as root)
  6. Open File > Preferences. Into Additional Boards Manager URLs put https://zevero.github.io/avr_boot/package_zevero_avr_boot_index.json
  7. Save and close
  8. Open Tools > Board > Boards Manager. Search for avr_boot and install.
  9. Close Boards Manager
  10. On Tools > Board choose ATmega328/P
  11. Launch bootloader burn using Tools > Burn bootloader

On finish, you can close the IDE, unplug ArduinoISP and proceed with next instructions.

Step 2: Ethernet Shield

Plug the ethernet shield. It should be easy.

Step 3: Accelerometer MMA7361

Link these pins from Accelerometer MMA7361 to Arduino board:

  • Vin: 5v
  • GND: GND
  • SEL: GND
  • X: A0
  • Y: A1
  • Z: A2

Loop back 3v3 pin to SLP on Accelerometer.

Step 4: (optional) LEDs

Remember to put a resistor with LED (after/before is not really important) to limit current flowing, otherwise you may damage the Arduino board.

By default, LED pins are:

  • Pin 2 : Yellow
  • Pin 5 : Green
  • Pin 3 : Red

Step 5: Software

  1. Format your SD-card with FAT32 (or FAT16)
  2. Download FIRMWARE.BIN from http://www.seismocloud.com/page.php?id=instr-arduino
  3. Place FIRMWARE.BIN into SD-card
  4. Insert SD-card into Arduino Uno and power on.
  5. Open SeismoCloud app, connect to the same network of the board and register your device. Enjoy!

How to build Arduino code

If you want to build Arduino code yourself, you need to use PetitFS version bundled with this repo (just place into ~/Arduino/libraries/), and modify/fix EthernetClient class (in Arduino_IDE_folder/libraries/Ethernet/src/EthernetClient.cpp) adding these two lines to class constructor:

randomSeed(analogRead(0));
_srcport = 1024 + random(1, 60000);

Note: this issue still present into arduino ide v1.8.1 - see arduino-libraries/Ethernet#10

Please note that if you use avr_boot bootloader (Step 1) you won't be able to see debug strings nor upload sketch thru USB (see above to reverse bootloader flash). Also, to enable debugs you need to modify constants into common.h