Here's a sample code to get a single image. Below returned value is bytes of png format image. To get uncompressed and other format please see next section.
#include "vehicles/multirotor/api/MultirotorRpcLibClient.hpp"
int getOneImage()
{
using namespace std;
using namespace msr::airlib;
//for car use CarRpcLibClient
msr::airlib::MultirotorRpcLibClient client;
vector<uint8_t> png_image = client.simGetImage(0, VehicleCameraBase::ImageType::Scene);
//do something with images
}from AirSimClient import *
# for car use CarClient()
client = MultirotorClient()
png_image = client.simGetImage(0, AirSimImageType.Scene)
# do something with imageThe simGetImages API which is slightly more complex to use than simGetImage API, for example, you can get left camera view, right camera view and depth image from left camera in a single API call. The simGetImages API also allows you to get uncompressed images as well as floating point single channel images (instead of 3 channel (RGB), each 8 bit).
int getStereoAndDepthImages()
{
using namespace std;
using namespace msr::airlib;
typedef VehicleCameraBase::ImageRequest ImageRequest;
typedef VehicleCameraBase::ImageResponse ImageResponse;
typedef VehicleCameraBase::ImageType ImageType;
//for car use
//msr::airlib::CarRpcLibClient client;
msr::airlib::MultirotorRpcLibClient client;
//get right, left and depth images. First two as png, second as float16.
vector<ImageRequest> request = {
//png format
ImageRequest(0, ImageType::Scene),
//uncompressed RGBA array bytes
ImageRequest(1, ImageType::Scene, false, false),
//floating point uncompressed image
ImageRequest(1, ImageType::DepthPlanner, true)
};
const vector<ImageResponse>& response = client.simGetImages(request);
//do something with response which contains image data, pose, timestamp etc
}from AirSimClient import *
# for car use CarClient()
client = MultirotorClient()
responses = client.simGetImages([
# png format
ImageRequest(0, AirSimImageType.Scene),
# uncompressed RGBA array bytes
ImageRequest(1, AirSimImageType.Scene, False, False),
# floating point uncompressed image
ImageRequest(1, AirSimImageType.DepthPlanner, True)])
# do something with response which contains image data, pose, timestamp etcIf you plan to use numpy for image manipulation, you should get uncompressed RGBA image and then convert to numpy like this:
responses = client.simGetImages([ImageRequest(0, AirSimImageType.Scene, False, False)])
response = responses[0]
# get numpy array
img1d = np.fromstring(response.image_data_uint8, dtype=np.uint8)
# reshape array to 4 channel image array H X W X 4
img_rgba = img1d.reshape(response.height, response.width, 4)
# original image is fliped vertically
img_rgba = np.flipud(img_rgba)
# just for fun add little bit of green in all pixels
img_rgba[:,:,1:2] = 100
# write to png
Client.write_png(os.path.normpath(filename + '.greener.png'), img_rgba) For a more complete ready to run sample code please see sample code in HelloDrone project for multirotors or HelloCar project.
See also other example code that generates specified number of stereo images along with ground truth depth and disparity and saving it to pfm format.
For a more complete ready to run sample code please see sample code in AirSimClient project for multirotors or HelloCar sample. This code also demonstrates simple activities such as saving images in files or using numpy to manipulate images.
The camera ID 0 to 4 corresponds to center front, left front, right front, driver head, center rear respectively.
The camera ID 0 to 4 corresponds to center front, left front, right front, center downward, center rear respectively.
You can use AirSim in so-called "Computer Vision" mode. In this mode, physics engine is disabled and there is no flight controller active. This means when you start AirSim, vehicle would just hang in the air. However you can move around using keyboard (use F1 to see help on keys). You can press Record button to continuously generate images. Or you can call APIs to move around and take images.
To active this mode, edit settings.json that you can find in your Documents\AirSim folder (or ~/Documents/AirSim on Linux) and make sure following values exist at root level:
{
"SettingsVersion": 1.0,
"UsageScenario": "ComputerVision"
}When you start AirSim and prompted to choose car or drone, select drone by pressing No button.
Here's the Python code example to move camera around and capture images.
If you are only interested in this mode, you might also want to take a look at UnrealCV project.
To move around the environment using APIs you can use simSetPose API. This API takes position and orientation and sets that on the vehicle. If you don't want to change position (or orientation) then set components of position (or orientation) to floating point nan values.
To change orientation of individial camera, you can use setCameraOrientation API. It takes camera ID which is zero-based index of camera and quaternion relative to body in NED frame. For example, to set camera-0 to 15-degree pitch, you can use:
client.setCameraOrientation(0, AirSimClientBase.toQuaternion(0.261799, 0, 0)); #radians
You can set stabilization for pitch, roll or yaw for any camera using settings.
Please see example usage.
To change resolution, FOV etc, you can use settings.json. For example, below is the complete content of settings.json that sets parameters for scene capture and uses "Computer Vision" mode described above. If you omit any setting then below default values will be used. For more information see settings doc. If you are using stereo camera, currently the distance between left and right is fixed at 25 cm.
{
"CaptureSettings": [
{
"ImageType": 0,
"Width": 256,
"Height": 144,
"FOV_Degrees": 90,
"AutoExposureSpeed": 100,
"MotionBlurAmount": 0
}
],
"UsageScenario": "ComputerVision"
}The getCameraInfo(camera_id) API call returns pose (in world frame, NED coordinates, SI units) and FOV (in degrees) of specified camera. Camera ID is zero-based index of camera. Please see example usage.
Scene = 0,
DepthPlanner = 1,
DepthPerspective = 2,
DepthVis = 3,
DisparityNormalized = 4,
Segmentation = 5,
SurfaceNormals = 6,
Infrared = 7You normally want to retrieve the depth image as float (i.e. set pixels_as_float = true) and specify ImageType = DepthPlanner or ImageType = DepthPerspective in ImageRequest. For ImageType = DepthPlanner, you get depth in camera plan, i.e., all points that are in plan parallel to camera have same depth. For ImageType = DepthPerspective, you get depth from camera using a projection ray that hits that pixel. Depending on your use case, planner depth or perspective depth may be the ground truth image that you want. For example, you may be able to feed perspective depth to ROS package such as depth_image_proc to generate a point cloud. Or planner depth may be more compatible with estimated depth image generated by stereo algorithms such as SGM.
When you specify ImageType = DepthVis in ImageRequest, you get an image that helps depth visualization. In this case, each pixel value is interpolated from red to green depending on depth in camera plane in meters. The pixels with pure green means depth of 100m or more while pure red means depth of 0 meters.
You normally want to retrieve disparity image as float (i.e. set pixels_as_float = true and specify ImageType = DisparityNormalized in ImageRequest) in which case each pixel is (Xl - Xr)/Xmax, which is thereby normalized to values between 0 to 1.
When you specify ImageType = Segmentation in ImageRequest, you get an image that gives you ground truth segmentation of the scene. At the startup, AirSim assigns value 0 to 255 to each mesh available in environment. This value is than mapped to a specific color in the pallet. The RGB values for each object ID can be found in this file.
You can assign a specific value (limited to the range 0-255) to a specific mesh using APIs. For example, below Python code sets the object ID for the mesh called "Ground" to 20 in Blocks environment and hence changes its color in Segmentation view:
success = client.simSetSegmentationObjectID("Ground", 20);The return value is a boolean type that lets you know if the mesh was found.
Notice that typical Unreal environments, like Blocks, usually have many other meshes that comprises of same object, for example, "Ground_2", "Ground_3" and so on. As it is tedious to set object ID for all of these meshes, AirSim also supports regular expressions. For example, the code below sets all meshes which have names starting with "ground" (ignoring case) to 21 with just one line:
success = client.simSetSegmentationObjectID("ground[\w]*", 21, True);The return value is true if at least one mesh was found using regular expression matching.
It is recommended that you request uncompressed image using this API to ensure you get precise RGB values for segmentation image:
responses = client.simGetImages([ImageRequest(0, AirSimImageType.Segmentation, False, False)])
img1d = np.fromstring(response.image_data_uint8, dtype=np.uint8) #get numpy array
img_rgba = img1d.reshape(response.height, response.width, 4) #reshape array to 4 channel image array H X W X 4
img_rgba = np.flipud(img_rgba) #original image is fliped vertically
#find unique colors
print(np.unique(img_rgba[:,:,0], return_counts=True)) #red
print(np.unique(img_rgba[:,:,1], return_counts=True)) #green
print(np.unique(img_rgba[:,:,2], return_counts=True)) #blue A complete ready-to-run example can be found in segmentation.py.
An object's ID can be set to -1 to make it not show up on the segmentation image.
To get desired ground truth segmentation you will need to know the names of the meshes in your Unreal environment. To do this, you will need to open up Unreal Environment in Unreal Editor and then inspect the names of the meshes you are interested in using the World Outliner. For example, below we see the mesh names for he ground in Blocks environment in right panel in the editor:
If you don't know how to open Unreal Environment in Unreal Editor then try following the guide for building from source.
Once you decide on the meshes you are interested, note down their names and use above API to set their object IDs. There are few settings available to change object ID generation behavior.
At present the color for each object ID is fixed as in this pallete. We will be adding ability to change colors for object IDs to desired values shortly. In the meantime you can open the segmentation image in your favorite image editor and get the RGB values you are interested in.
At the start, AirSim assigns object ID to each object found in environment of type UStaticMeshComponent or ALandscapeProxy. It then either uses mesh name or owner name (depending on settings), lower cases it, removes any chars below ASCII 97 to remove numbers and some punctuations, sums int value of all chars and modulo 255 to generate the object ID. In other words, all object with same alphabet chars would get same object ID. This heuristic is simple and effective for many Unreal environments but may not be what you want. In that case, please use above APIs to change object IDs to your desired values. There are few settings available to change this behavior.
The simGetSegmentationObjectID API allows you get object ID for given mesh name.
Currently this is just a map from object ID to grey scale 0-255. So any mesh with object ID 42 shows up with color (42, 42, 42). Please see segmentation section for more details on how to set object IDs. Typically noise setting can be applied for this image type to get slightly more realistic effect. We are still working on adding other infrared artifacts and any contributions are welcome.
The collision information can be obtained using getCollisionInfo API. This call returns a struct that has information not only whether collision occurred but also collision position, surface normal, penetration depth and so on.
A complete example of setting vehicle positions at random locations and orientations and then taking images can be found in GenerateImageGenerator.hpp. This example generates specified number of stereo images and ground truth disparity image and saving it to pfm format.