hNormalise is a small tool and accompanying library for the conversion of regular rsyslog to
structured log messages, i.e., turning the msg payload into (a nested) JSON object.
Features:
- accepts incoming data on a regular TCP port or a ZeroMQ
pulltype port. - accepts JSON-style rsyslog data (sent as %jsonmesg% in the rsyslog template)
- accepts legacy encoded rsyslog data (currently sent with the fixed template <%PRI%>1 %TIMEGENERATED% %HOSTNAME% %SYSLOGTAG% - %APPNAME%: %msg%)
- sends out successfull converted results on a TCP or ZeroMQ port, allowing communication back to a wide range of services, including rsyslog, logstash, ...
- sends out original messages to a (different) TCP or ZeroMQ port in case the parsing fails, allowing other services to process the information.
- can process up to 18K Torque log messages/s on a 2.7GHz 2015 Corei5 (mid 2015 MacBook Pro) when streaming from an to a file.
To run and build hNormalise, clone this repository and run stack build followed by stack install inside it.
To start just run hnormalise. If you need help, use the -h flag. To run the included tests, run stack test.
To run the included benchmarks, run stack bench (with the --output target.html flag to get a nice web page with
the results).
Ports and machines can be tweaked through a configuration file. See data/hnormalise.yaml.full for an example.
Testing the actual setup can be done trivially via nc, provided you have data to throw at hNormalise. A test example
is also provided below, or you can get useful examples from the tests, under test/HNormalise/*/ParserSpec.hs
For ZeroMQ, the development libraries for czmq are required. We use ZeroMQ >= 4.1.
Currently, hNormalise supports several log messages out of the box (i.e., the ones we need :)
- Torque accounting logs for a job exit.
- Shorewall firewall log messages for TCP, UDP and ICMP connections
- Lmod module load messages
- Snoopy log messages
More are forthcoming soon, e.g., (in no particular order)
- GPFS
- Icinga
- NFS
- OpenNebula
- SSH
- Jube
hNormalise uses the Attoparsec package to have fast and efficient parsing.
Attoparsec offers a clean and relatively simple DSL that allows getting the relevant data from the message and
discarding the rest. We also rely on permute to deal with log lines that may contain e.g., key-value pairs in
no definite ordering. Note that this will slow down the parsing.
Caveat: at this point, we do not a priori restrict the possible parsers we unleash on each message. However, if the inbound data can be tagged properly, we could reduce the maximal number of parsers tried and avoid extensive backtracking. Using ZeroMQ, this could be done by using topics to tag inbound information.
To add a new parser for log lines from tool Tool, several actions must be taken:
- A
src/HNormalise/Tooldirectory must be created, under which all specific code and data types for the new log lines will reside. Note thatToolcan provide multiple types of log lines, but they should all be coded under the same location. - Define a data type that holds the relevant data from the log line you wish to keep/forward in
HNOrmalise.Tool.Internal. Make sure that the type derivesGeneric(and add the require language extentions on top of the file). - The parser goes in the
HNormalise.Tool.Parsermodule. - Conversion of the data type that was defined to hold the data to JSON is done in
HNormalise.Tool.JSON. - Finally, the
HNormalisemodule defines a sum-type container to which you should add your own entry. Remember to also add a line for the corresponding getJsonKey function, which defines the key under whoch the parsed data will be made available downstream. - Add tests with relevant cases under
test/HNormalise/Tool/ParserSpec.hs. The framework should pick these up automagically. - Add en entry for your test cases to the set of benchmarks, so we can have a reasonable estimate on how your parser is
performing. Update the HTML page under
benchmarkswith the complete set of tests you ran.
The original (anonymised) message sent by rsyslog (as JSON) for a Torque job exit event is
{"msg":"05/14/2017 00:00:02;E;3275189.master.mycluster.mydomain.com;user=someuser group=somegroup jobname=myjob queue=long ctime=1494689613 qtime=1494689613 etime=1494689613 start=1494689684 [email protected] exec_host=mynode.mycluster.mydomain.com/1 Resource_List.neednodes=mynode:ppn=1 Resource_List.nice=0 Resource_List.nodect=1 Resource_List.nodes=mynode:ppn=1 Resource_List.vmem=4720302336b Resource_List.walltime=71:59:59 session=102034 total_execution_slots=1 unique_node_count=1 end=1494712802 Exit_status=0 resources_used.cput=23076 resources_used.energy_used=0 resources_used.mem=64480kb resources_used.vmem=314996kb resources_used.walltime=06:25:15", "rawmsg": "redacted", "timereported": "2017-05-15T18:16:16.724002+02:00", "hostname": "master.mydomain.com", "syslogtag": "hnormalise", "inputname": "imfile", "fromhost": "", "fromhost-ip": "", "pri": "133", "syslogfacility": "16", "syslogseverity": "5", "timegenerated": "2017-05-15T18:16:16.724002+02:00", "programname": "hnormalise", "protocol-version": "0", "structured-data": "-", "app-name": "hnormalise", "procid": "-", "msgid": "-", "uuid": null, "$!": null }
The resulting JSON is sent to logstash, which forwarded it to ES, e.g. with the following configuration
input {
tcp {
type => "normalised_syslog"
port => 26002
codec => "json"
}
}
filter {
if [type] == 'normalised_syslog' {
mutate {
add_field => {
"[@metadata][target_index]" => "rsyslog-test"
}
}
}
}
output {
elasticsearch {
template_overwrite => true
document_type => "%{@type}"
index => "%{[@metadata][target_index]}"
hosts => [ "127.0.0.1" ]
flush_size => 50
}
}
The following information can be retrieved from Elasticsearch. The interesting part is the torque entry, which is what we
aimed to get.
{
"took" : 1,
"timed_out" : false,
"_shards" : {
"total" : 5,
"successful" : 5,
"failed" : 0
},
"hits" : {
"total" : 1,
"max_score" : 1.0,
"hits" : [
{
"_index" : "rsyslog-test",
"_type" : "%{@type}",
"_id" : "AVwWnWEqQ4ADFiA38GPp",
"_score" : 1.0,
"_source" : {
"@timestamp" : "2017-05-17T13:33:51.690Z",
"port" : 58031,
"@version" : "1",
"host" : "0:0:0:0:0:0:0:1",
"torque" : {
"owner" : "[email protected]",
"startCount" : null,
"resourceUsage" : {
"mem" : 66027520,
"vmem" : 322555904,
"cputime" : 23076,
"walltime" : {
"hours" : 6,
"seconds" : 15,
"minutes" : 25,
"days" : 0
},
"energy" : 0
},
"execHost": [
{
"name": "exec_host=mynode.mycluster.mydomain.com",
"cores": [
1
]
}
],
"resourceRequest" : {
"neednodes" : {
"Right" : [
{
"name" : "mynode",
"ppn" : 1
}
]
},
"nodes" : {
"Right" : [
{
"name" : "mynode",
"ppn" : 1
}
]
},
"vmem" : 4720302336,
"nodeCount" : 1,
"walltime" : {
"hours" : 71,
"seconds" : 59,
"minutes" : 59,
"days" : 0
},
"nice" : 0
},
"session" : 102034,
"times" : {
"qtime" : 1494689613,
"etime" : 1494689613,
"ctime" : 1494689613,
"startTime" : 1494689684,
"endTime" : 1494712802
},
"totalExecutionSlots" : 1,
"name" : {
"cluster" : "mycluster",
"number" : 3275189,
"array_id" : null,
"master" : "master"
},
"uniqueNodeCount" : 1,
"user" : "someuser",
"exitStatus" : 0,
"jobname" : "myjob",
"queue" : "long",
"group" : "somegroup"
},
"message" : "05/14/2017 00:00:02;E;3275189.master.mycluster.mydomain.com;user=someuser group=somegroup jobname=myjob queue=long ctime=1494689613 qtime=1494689613 etime=1494689613 start=1494689684 [email protected] exec_host=mynode.mycluster.mydomain.com/1 Resource_List.neednodes=mynode:ppn=1 Resource_List.nice=0 Resource_List.nodect=1 Resource_List.nodes=mynode:ppn=1 Resource_List.vmem=4720302336b Resource_List.walltime=71:59:59 session=102034 total_execution_slots=1 unique_node_count=1 end=1494712802 Exit_status=0 resources_used.cput=23076 resources_used.energy_used=0 resources_used.mem=64480kb resources_used.vmem=314996kb resources_used.walltime=06:25:15",
"syslog_abspri" : "5",
"type" : "normalised_syslog",
"tags" : [ ]
}
}
]
}
}