Blinking LED with Micropython 💥 💡

Documenting how I was able to set up and run Micropython on NodeMCU which is a esp8266 board and blink LED.

Installation

esptool - $ sudo pip install esptool

rshell - $ sudo pip install rshell

micropython firmare for esp8266 - download latest version here

main.py in this repo. clone this repo to get it copy the code.

first erase flash using esptool with this command

esptool.py --port /dev/ttyUSB0 erase_flash

deploy the firmware

esptool.py --port /dev/ttyUSB0 --baud 115200 write_flash --flash_size=detect 0 esp8266-20171101-v1.9.3.bin

rshell -p /dev/ttyUSB0

> cp main.py /pyboard

On the nodemcu the onboard LED is on pin 2.

Now restart the board by pressing RST on the board or disconnect usb and reconnect.

LED should be blinking.

Note that on method of a Pin might turn the LED off and off might turn it on (or vice versa)