From 3765ba382ff650a2b35aed9d116cc325ec4bd9db Mon Sep 17 00:00:00 2001 From: Josh Kirshenbaum Date: Thu, 22 Oct 2020 01:13:53 -0400 Subject: [PATCH 01/15] begin work on breakout board --- .../DAC and Digipot Breakout Board.sch | 1768 +++++++++++++++++ 1 file changed, 1768 insertions(+) create mode 100644 EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch diff --git a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch new file mode 100644 index 00000000..9d64457f --- /dev/null +++ b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch @@ -0,0 +1,1768 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>16-Lead Thin Shrink Small Outline Package TSSOP</b> + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + +>Name +>Value + + + + + + + + + +>Name +>Value + + + + +>NAME +>VALUE + + + + + + + + + + + + +>Name +>Value + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b><p> +chip + + + + + + + + + +>NAME +>VALUE + + + + + + + + +>Name +>Value + + + + + + + + + + + + +>Name +>Value + + + + + + + + + + +>NAME +>VALUE + + +<p><b>Generic 3216 (1206) package</b></p> +<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p> +<p>Source: Sparkfun Resistors Library</p> + + + + + + + + +>NAME +>VALUE + + + + + +CTZ3 Series land pattern for variable capacitor - CTZ3E-50C-W1-PF + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<h3>CAP-PTH-SMALL-KIT</h3> +Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571).<br> +<br> +<b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +This is the "EZ" version of the .1" spaced ceramic thru-hole cap.<br> +It has reduced top mask to make it harder to put the component on the wrong side of the board. + + + + + + + +>Name +>Value + + + + + + + + + + + +<b>CAPACITOR</b><p> +chip + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>RESISTOR</b><p> +chip + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + +>Name +>Value + + +This is the "EZ" version of the standard .3" spaced resistor package.<br> +It has a reduced top mask to make it harder to install upside-down. + + + + + + + + + + + + + + +>Name +>Value + + +<h3>AXIAL-0.3-KIT</h3> + +Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.<br> +<br> + +<b>Warning:</b> This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. + + + + + + + + + + +>Name +>Value + + + + + + + + + + + + + + + + + + + + + + + + + + +1/2W Resistor, 0.5" wide<p> + +Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> + + + + + + +>Name +>Value + + +1/4W Resistor, 0.4" wide<p> + +Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> + + + + + + +>Name +>Value + + + + + + + + +>Name +>Value + + + + + + + + + + + + + +>Name +>Value + + +1/6W Thru-hole Resistor - *UNPROVEN* + + + + + + +>NAME +>VALUE + + +1W Resistor, 0.6" wide<p> + +Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> + + + + + + +>Name +>Value + + +2W Resistor, 0.8" wide<p> + +Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> + + + + + + +>Name +>Value + + + + + + + + +POWER RESISTOR + + + + + + + + + + + + + +<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> + + + + + + + + + + + + +>VALUE +>NAME + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE +GND +IN +OUT + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +Standard 9-pin 0.1" header. +<br> +<br> +<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> + + + + + + + + + + + + + + + + + + + + + + + +Murata OKI-78SR 5V 1.5A Non-Isolated Switching Regulator DC/DC - <a href="https://power.murata.com/data/power/oki-78sr.pdf">Datasheet</a> + + + + + + + + + + + + + + + + + + + + + + + + + + + +AD5721 Digital to Analog Converter <br> +12-bit resolution <br> +<a href="https://www.analog.com/media/en/technical-documentation/data-sheets/ad5761_5721.pdf"> Datasheet </a> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +AD5684 4-channel DAC <br> +5V, 12-bit resolution <br> +<a href="https://www.analog.com/media/en/technical-documentation/data-sheets/AD5686_5684.pdf">Datasheet </a> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Capacitor</b> +Standard 0603 ceramic capacitor, and 0.1" leaded capacitor. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Resistor</b> +Basic schematic elements and footprints for 0603, 1206, and PTH resistors. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>VALUE + + + + + +>VALUE + + + + +>VALUE + + + + + +>VALUE + + + + + +>VALUE + + + + + + +>VALUE + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + From dd3b62656c45b31e988cc2968b0c356e31520e9b Mon Sep 17 00:00:00 2001 From: Josh Kirshenbaum Date: Fri, 23 Oct 2020 01:10:27 -0400 Subject: [PATCH 02/15] schematic for 12V and 5V DACs --- .../DAC and Digipot Breakout Board.sch | 650 +++++++++++------- 1 file changed, 393 insertions(+), 257 deletions(-) diff --git a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch index 9d64457f..ad30ae08 100644 --- a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch +++ b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch @@ -189,93 +189,6 @@ - -<b>PIN HEADER</b> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - @@ -823,35 +736,49 @@ Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pd + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - -<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> - - - - - - - - - - - - ->VALUE ->NAME - - - - - - - - - - - @@ -938,35 +865,43 @@ Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pd >NAME >VALUE + + + + + + + + +Teensy 3.2 + + + + + + + + + + + + + + + + + + + + + + + + + + - -Standard 9-pin 0.1" header. -<br> -<br> -<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> - - - - - - - - - - - - - - - - - - - - - - Murata OKI-78SR 5V 1.5A Non-Isolated Switching Regulator DC/DC - <a href="https://power.murata.com/data/power/oki-78sr.pdf">Datasheet</a> @@ -1384,6 +1319,49 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. + +Simple version of the Teensy 3.2 board that only uses the 2 main rows of pins, not the inner pins or the pins opposite the usb port. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -1415,19 +1393,6 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors.>VALUE - - - ->VALUE - - - - - - ->VALUE - - @@ -1482,32 +1447,6 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - -<b>SUPPLY SYMBOL</b> - - - - - - - - - - - - -<b>SUPPLY SYMBOL</b> - - - - - - - - - - - @@ -1520,18 +1459,12 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - - - - - - @@ -1539,19 +1472,32 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - - + + + + + + + + + + + + + + + + + + + - - - - @@ -1565,28 +1511,13 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - - - - - - - - - - - - - - - - - - + + + @@ -1611,14 +1542,63 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - - + + + + + + + + + + + + + + + + + + + + + + + + - - + + - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -1632,12 +1612,6 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - - - - - - @@ -1655,12 +1629,6 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - - - - - - @@ -1672,6 +1640,25 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. + + + + + + + + + + + + + + + + + + + @@ -1685,44 +1672,78 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - - - - - - + + + + + + + + + + + + + + + + + + + + + + - - - + - - - + - - - - + + + + - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + - + @@ -1732,32 +1753,147 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. + + + + + - - - - + - + + + + + + + + - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + From 36ab0301f1943eb6e46684b1062e9bed336af4df Mon Sep 17 00:00:00 2001 From: Josh Kirshenbaum Date: Sun, 25 Oct 2020 18:08:30 -0400 Subject: [PATCH 03/15] add digipot --- .../DAC and Digipot Breakout Board.sch | 2857 ++++++++++++++++- 1 file changed, 2818 insertions(+), 39 deletions(-) diff --git a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch index ad30ae08..7944e493 100644 --- a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch +++ b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch @@ -777,6 +777,40 @@ Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pd + +<b>20-Lead Thin Shrink Small Outline Package TSSOP</b> <br><br> +Source: https://www.analog.com/media/en/package-pcb-resources/package/380523655245964505593671154107510036154ru24.pdf<br> + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + @@ -900,6 +934,35 @@ Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pd + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -1362,6 +1425,45 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. + +AD5263 Digital Potentiometer <br> +<a href="https://www.analog.com/media/en/technical-documentation/data-sheets/AD5263.pdf"> Datasheet </a> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -1449,6 +1551,2571 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. + + + + + + + + +Standard document field for HyTech Schematics. + + + + + + + + + + + + +Date: +>LAST_DATE_TIME +Sheet: +Engineer: +Document Name: +Description: + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>DRAWING_NAME +>SHEET + + + + +HyTech Racing Frame (ANSI Size B) +<br> +Prints on US Tabloid Landscape 11" by 17" +<br><br> +Fill Engineer/Description Fields with Text using the following settings: +<br> +Size: 0.1 +<br> +Ratio: 8% +<br> +Line Distance: 50% +<br> +Font: Proportional +<br> +Layer: 94 Symbol + + + + + + + + + + + + + + + + + + @@ -1492,24 +4159,36 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. + + + + + + + + + + +Josh Kirshenbaum +Breakout board to test DACs AD5721, AD5684 and digital potentiometer AD5263 - - - + + + - - + + - - + + - - + + @@ -1545,15 +4224,15 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - - - + + + - - + + - - + + @@ -1570,8 +4249,8 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - - + + @@ -1600,6 +4279,37 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -1607,8 +4317,8 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - - + + @@ -1624,8 +4334,8 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - - + + @@ -1642,9 +4352,9 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - + - + @@ -1659,11 +4369,17 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. + + + + + + - + @@ -1674,9 +4390,9 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - + - + @@ -1710,8 +4426,8 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - - + + @@ -1742,6 +4458,36 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -1781,20 +4527,25 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - - + + + + - - + + @@ -1807,6 +4558,12 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. + + + + + + @@ -1830,8 +4587,8 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - - @@ -1847,14 +4604,19 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - - + + + + @@ -1892,8 +4654,25 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - - + + + + + + + + + + + + + + + + From 02f1cffcf90030018b0aeee3483f368996d4f73d Mon Sep 17 00:00:00 2001 From: Josh Kirshenbaum Date: Tue, 27 Oct 2020 20:38:44 -0400 Subject: [PATCH 04/15] add outputs and redo cs --- .../DAC and Digipot Breakout Board.sch | 1187 ++++++++++++++++- 1 file changed, 1132 insertions(+), 55 deletions(-) diff --git a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch index 7944e493..d9220e58 100644 --- a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch +++ b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch @@ -811,6 +811,476 @@ Source: https://www.analog.com/media/en/package-pcb-resources/package/3805236552 >NAME >VALUE + +<b>Mini-Fit Junior connector 4 pole</b><p> +Source: http://www.molex.com + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + +105312-1204 Nano-Fit™ Vertical Header, Through Hole, Dual Row, 4 Circuits + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +19428-0011 +<br> +<br> +MX150L™ Vertical PCB Header + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Solder Pad +0.1" x 0.05" + +>NAME + + +This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. +You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). +This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" +to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. +Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also, +if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment +will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. +<br> +<br> +<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. +You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). +This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" +to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. +Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also, +if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment +will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. +<br> +<br> +<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. +You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). +This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" +to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. +Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also, +if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment +will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. +<br> +<br> +<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + @@ -963,6 +1433,77 @@ Source: https://www.analog.com/media/en/package-pcb-resources/package/3805236552 + + + +>NAME +>VALUE + + + + +>NAME + + +Solder pad used to solder wires onto PCB + + + + +<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> + + + + + + +>VALUE +>NAME + + + + +<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> + + + + + + + + +>VALUE +>NAME + + + + + + +<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> + + + + + + + + + + + + +>VALUE +>NAME + + + + + + + + + @@ -1464,6 +2005,274 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. + +<b>Mini-Fit Junior connector 4 pole</b><p> +Source: http://www.molex.com + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Solder pad used to attach wires directly to PCB + + + + + + + + + + + + + + + +Standard 2-pin 0.1" header. +<br> +<br> +NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS... +This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment +will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. +<br> +<br> +Note: The Sparkfun version includes many other packages including surface mount that may be of future interest. +<br> +<br> +<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Standard 4-pin 0.1" header. +<br> +<br> +NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS... +This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment +will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. +<br> +<br> +Note: The Sparkfun version includes many other packages including surface mount that may be of future interest. +<br> +<br> +<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Standard 8-pin 0.1" header. +<br> +<br> +NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS... +This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment +will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. +<br> +<br> +Note: The Sparkfun version includes many other packages including surface mount that may be of future interest. +<br> +<br> +<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -4132,7 +4941,6 @@ Layer: 94 Symbol - @@ -4169,6 +4977,26 @@ Layer: 94 Symbol + + + + + + + + + + + + + + + + + + + + @@ -4177,18 +5005,18 @@ Layer: 94 Symbol Breakout board to test DACs AD5721, AD5684 and digital potentiometer AD5263 - - - + + + - - + + - - + + - - + + @@ -4198,9 +5026,6 @@ Layer: 94 Symbol - - - @@ -4310,6 +5135,53 @@ Layer: 94 Symbol + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -4317,8 +5189,8 @@ Layer: 94 Symbol - - + + @@ -4330,21 +5202,21 @@ Layer: 94 Symbol + + + + + + - - + + - - - - - - @@ -4379,7 +5251,7 @@ Layer: 94 Symbol - + @@ -4488,6 +5360,12 @@ Layer: 94 Symbol + + + + + + @@ -4504,7 +5382,7 @@ Layer: 94 Symbol - @@ -4515,7 +5393,7 @@ Layer: 94 Symbol - @@ -4528,7 +5406,7 @@ Layer: 94 Symbol - @@ -4564,19 +5442,28 @@ Layer: 94 Symbol + + + + + + - + + + + - - - - - @@ -4596,34 +5483,22 @@ Layer: 94 Symbol - - - - - - - - - - - - - - - - - - + + + + + + + + @@ -4631,6 +5506,16 @@ Layer: 94 Symbol + + + + + + + + @@ -4638,6 +5523,16 @@ Layer: 94 Symbol + + + + + + + + @@ -4645,6 +5540,16 @@ Layer: 94 Symbol + + + + + + + + @@ -4675,6 +5580,178 @@ Layer: 94 Symbol + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + From a3b62a785edf27fdad85cc41863792311f8ab406 Mon Sep 17 00:00:00 2001 From: Josh Kirshenbaum Date: Tue, 27 Oct 2020 22:02:28 -0400 Subject: [PATCH 05/15] reorganize schematic a bit --- .../DAC and Digipot Breakout Board.sch | 2358 +++++++++-------- 1 file changed, 1191 insertions(+), 1167 deletions(-) diff --git a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch index d9220e58..593d8009 100644 --- a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch +++ b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch @@ -490,252 +490,6 @@ It has reduced top mask to make it harder to put the component on the wrong side - -<b>CAPACITOR</b><p> -chip - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - ->NAME ->VALUE - - -<b>RESISTOR</b><p> -chip - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - ->Name ->Value - - -This is the "EZ" version of the standard .3" spaced resistor package.<br> -It has a reduced top mask to make it harder to install upside-down. - - - - - - - - - - - - - - ->Name ->Value - - -<h3>AXIAL-0.3-KIT</h3> - -Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.<br> -<br> - -<b>Warning:</b> This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. - - - - - - - - - - ->Name ->Value - - - - - - - - - - - - - - - - - - - - - - - - - - -1/2W Resistor, 0.5" wide<p> - -Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> - - - - - - ->Name ->Value - - -1/4W Resistor, 0.4" wide<p> - -Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> - - - - - - ->Name ->Value - - - - - - - - ->Name ->Value - - - - - - - - - - - - - ->Name ->Value - - -1/6W Thru-hole Resistor - *UNPROVEN* - - - - - - ->NAME ->VALUE - - -1W Resistor, 0.6" wide<p> - -Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> - - - - - - ->Name ->Value - - -2W Resistor, 0.8" wide<p> - -Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> - - - - - - ->Name ->Value - - - - - - - - -POWER RESISTOR - - - - - - - - - - @@ -777,40 +531,6 @@ Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pd - -<b>20-Lead Thin Shrink Small Outline Package TSSOP</b> <br><br> -Source: https://www.analog.com/media/en/package-pcb-resources/package/380523655245964505593671154107510036154ru24.pdf<br> - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - <b>Mini-Fit Junior connector 4 pole</b><p> Source: http://www.molex.com @@ -1156,54 +876,21 @@ will be further integrated into the Sparkfun Library for other footprints. It c - -This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. -You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). -This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" -to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. -Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also, -if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment -will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. -<br> -<br> -<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - + + + + + + + + + + + +>Name +>Value - + <b>PIN HEADER</b> @@ -1280,6 +967,281 @@ will be further integrated into the Sparkfun Library for other footprints. It c + + + + + + + + + + + +<b>CAPACITOR</b><p> +chip + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>RESISTOR</b><p> +chip + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + +>NAME +>VALUE + + +This is the "EZ" version of the standard .3" spaced resistor package.<br> +It has a reduced top mask to make it harder to install upside-down. + + + + + + + + + + + + + + +>Name +>Value + + +<h3>AXIAL-0.3-KIT</h3> + +Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.<br> +<br> + +<b>Warning:</b> This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. + + + + + + + + + + +>Name +>Value + + + + + + + + + + + + + + + + + + + + + + + + + + +1/2W Resistor, 0.5" wide<p> + +Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> + + + + + + +>Name +>Value + + +1/4W Resistor, 0.4" wide<p> + +Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> + + + + + + +>Name +>Value + + + + + + + + +>Name +>Value + + + + + + + + + + + + + +>Name +>Value + + +1/6W Thru-hole Resistor - *UNPROVEN* + + + + + + +>NAME +>VALUE + + +1W Resistor, 0.6" wide<p> + +Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> + + + + + + +>Name +>Value + + +2W Resistor, 0.8" wide<p> + +Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> + + + + + + +>Name +>Value + + + + + + + + +POWER RESISTOR + + + + + + + + + + + +<b>20-Lead Thin Shrink Small Outline Package TSSOP</b> <br><br> +Source: https://www.analog.com/media/en/package-pcb-resources/package/380523655245964505593671154107510036154ru24.pdf<br> + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE @@ -1297,53 +1259,6 @@ will be further integrated into the Sparkfun Library for other footprints. It c IN OUT - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - @@ -1354,21 +1269,6 @@ will be further integrated into the Sparkfun Library for other footprints. It c - - - - - - - - - - - - ->NAME ->VALUE - @@ -1404,35 +1304,6 @@ will be further integrated into the Sparkfun Library for other footprints. It c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @@ -1479,22 +1350,28 @@ will be further integrated into the Sparkfun Library for other footprints. It c - + + + + +JUMP + + <a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> - - - + + + >VALUE ->NAME +>NAME @@ -1503,6 +1380,99 @@ will be further integrated into the Sparkfun Library for other footprints. It c + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -1534,71 +1504,6 @@ will be further integrated into the Sparkfun Library for other footprints. It c - -AD5721 Digital to Analog Converter <br> -12-bit resolution <br> -<a href="https://www.analog.com/media/en/technical-documentation/data-sheets/ad5761_5721.pdf"> Datasheet </a> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -AD5684 4-channel DAC <br> -5V, 12-bit resolution <br> -<a href="https://www.analog.com/media/en/technical-documentation/data-sheets/AD5686_5684.pdf">Datasheet </a> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - <b>Capacitor</b> Standard 0603 ceramic capacitor, and 0.1" leaded capacitor. @@ -1678,64 +1583,212 @@ Standard 0603 ceramic capacitor, and 0.1" leaded capacitor. - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Simple version of the Teensy 3.2 board that only uses the 2 main rows of pins, not the inner pins or the pins opposite the usb port. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Mini-Fit Junior connector 4 pole</b><p> +Source: http://www.molex.com + + + + + + + + + + + + + + + + + + + + + + + + - - + + + + - + - - + + + + - + - - + + + + - + - - + + + + - + - - + + + + - + - - + + + + - + - - + + + + @@ -1743,23 +1796,40 @@ Standard 0603 ceramic capacitor, and 0.1" leaded capacitor. - -<b>Resistor</b> -Basic schematic elements and footprints for 0603, 1206, and PTH resistors. + +Solder pad used to attach wires directly to PCB - + - + - - + - + + + +Standard 2-pin 0.1" header. +<br> +<br> +NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS... +This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment +will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. +<br> +<br> +Note: The Sparkfun version includes many other packages including surface mount that may be of future interest. +<br> +<br> +<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> + + + + + @@ -1768,7 +1838,7 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - + @@ -1777,7 +1847,7 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - + @@ -1786,124 +1856,139 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - + + + +Standard 4-pin 0.1" header. +<br> +<br> +NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS... +This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment +will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. +<br> +<br> +Note: The Sparkfun version includes many other packages including surface mount that may be of future interest. +<br> +<br> +<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> + + + + + + + - + + + - + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + +Jumper for changing operation of a device + + + + + - - + + - + - - + + - + - - + + - + + + +Standard 9-pin 0.1" header. +<br> +<br> +<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> + + + + + + + + + + + + - - - - - - - - - - + + + +<b>Resistor</b> +Basic schematic elements and footprints for 0603, 1206, and PTH resistors. + + + + + - - + + - + @@ -1912,7 +1997,7 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - + @@ -1921,229 +2006,106 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - - - -Simple version of the Teensy 3.2 board that only uses the 2 main rows of pins, not the inner pins or the pins opposite the usb port. - - - - - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + - - - -AD5263 Digital Potentiometer <br> -<a href="https://www.analog.com/media/en/technical-documentation/data-sheets/AD5263.pdf"> Datasheet </a> - - - - - + - - - - - - - - - - - - - - - - - - - - - - - + + - - - -<b>Mini-Fit Junior connector 4 pole</b><p> -Source: http://www.molex.com - - - - - - - - + - - - - + + - - - - - - + - + - - - - + + - + - - - - + + - + - - - - + + - + - - - - + + - + - - - - + + - + - - - - + + - + - - - - + + - - - -Solder pad used to attach wires directly to PCB - - - - - + - + + - - - -Standard 2-pin 0.1" header. -<br> -<br> -NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS... -This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment -will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. -<br> -<br> -Note: The Sparkfun version includes many other packages including surface mount that may be of future interest. -<br> -<br> -<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> - - - - - + @@ -2152,71 +2114,69 @@ Note: The Sparkfun version includes many other packages including surface mount - + - - + + - + - - + + - - - -Standard 4-pin 0.1" header. -<br> -<br> -NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS... -This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment -will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. -<br> -<br> -Note: The Sparkfun version includes many other packages including surface mount that may be of future interest. -<br> -<br> -<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> - - - - - + - - - + - - - + + + +AD5721 Digital to Analog Converter <br> +12-bit resolution <br> +<a href="https://www.analog.com/media/en/technical-documentation/data-sheets/ad5761_5721.pdf"> Datasheet </a> + + + + + - - - - + + + + + + + + + + + + + + + @@ -2224,48 +2184,71 @@ Note: The Sparkfun version includes many other packages including surface mount - -Standard 8-pin 0.1" header. -<br> -<br> -NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS... -This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment -will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. -<br> -<br> -Note: The Sparkfun version includes many other packages including surface mount that may be of future interest. -<br> -<br> -<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> + +AD5684 4-channel DAC <br> +5V, 12-bit resolution <br> +<a href="https://www.analog.com/media/en/technical-documentation/data-sheets/AD5686_5684.pdf">Datasheet </a> - + - + - - - - - - - - + + + + + + + + + + + + + + + + - + + + +AD5263 Digital Potentiometer <br> +<a href="https://www.analog.com/media/en/technical-documentation/data-sheets/AD5263.pdf"> Datasheet </a> + + + + + - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + @@ -4939,50 +4922,34 @@ Layer: 94 Symbol - - - - - - - - - - - - - - - - @@ -4992,11 +4959,30 @@ Layer: 94 Symbol - + + + + + + + + + + + + + + + + + + + + @@ -5009,49 +4995,27 @@ Layer: 94 Symbol - - + + - - + + - - - - - - - + + - - + + - - - - - - - - - - - - - - - - - - - + + - - + + @@ -5059,50 +5023,35 @@ Layer: 94 Symbol - - - - - + + - - + + - - - - - + + - - - - - + + - - + + - - + + - - + + - - + + - - - - - - - - + + @@ -5110,30 +5059,20 @@ Layer: 94 Symbol - - - - - - - - - + + - - + + - - + + - - + + - - - - - + + @@ -5154,13 +5093,10 @@ Layer: 94 Symbol - - - - - - - + + + + @@ -5170,18 +5106,72 @@ Layer: 94 Symbol - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - @@ -5189,18 +5179,21 @@ Layer: 94 Symbol - - + + + + + - - - + + - - + + + @@ -5212,40 +5205,47 @@ Layer: 94 Symbol - - + + - - - - - - + + + - + + + + + + + - - - - + + - - - - + + + + + + + - - - - + + + + + + + @@ -5253,12 +5253,11 @@ Layer: 94 Symbol - - - - - - + + + + + @@ -5267,34 +5266,25 @@ Layer: 94 Symbol - - - - - - - - + - - + + - - - - - - - - - + + + + + + + @@ -5303,105 +5293,105 @@ Layer: 94 Symbol - - - - + + + + + + + + + - - - - + + + + - - - - - - - - - + + + - - - + + + + - - - - - - - - - - + + + - - - - + + + + - - - - + + + + + + + + + - - - - + + + + - - - - + + + + - - - - - - - - - - - - - - - - - - - - - - @@ -5409,14 +5399,14 @@ Layer: 94 Symbol - - - + + @@ -5427,50 +5417,52 @@ Layer: 94 Symbol - - - + + + + - - - + + + + - - - - + + + + - - - - + + + + - - - - - - - - - - @@ -5478,16 +5470,16 @@ Layer: 94 Symbol - - - - - - @@ -5502,9 +5494,9 @@ Layer: 94 Symbol - - - @@ -5519,9 +5511,9 @@ Layer: 94 Symbol - - - @@ -5536,9 +5528,9 @@ Layer: 94 Symbol - - - @@ -5553,9 +5545,9 @@ Layer: 94 Symbol - - - @@ -5563,84 +5555,74 @@ Layer: 94 Symbol - - - - - - - - - - + + + + - - - - - + + - - - - - + + - - - - - + + - @@ -5650,65 +5632,65 @@ Layer: 94 Symbol + + - - - - - + + - - - - - + + - - - - - + + - @@ -5723,9 +5705,9 @@ Layer: 94 Symbol - - - @@ -5735,9 +5717,9 @@ Layer: 94 Symbol @@ -5747,9 +5729,51 @@ Layer: 94 Symbol + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + From 3df8e654ed559a4b6cdd67cbbba119869ec6aad3 Mon Sep 17 00:00:00 2001 From: Josh Kirshenbaum Date: Sat, 31 Oct 2020 16:32:10 -0400 Subject: [PATCH 06/15] start work on board --- .../DAC and Digipot Breakout Board.brd | 1184 +++++++++++++++++ .../DAC and Digipot Breakout Board.sch | 5 +- 2 files changed, 1187 insertions(+), 2 deletions(-) create mode 100644 EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd diff --git a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd new file mode 100644 index 00000000..918bba65 --- /dev/null +++ b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd @@ -0,0 +1,1184 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + +Solder Pad +0.1" x 0.05" + +>NAME + + +<b>16-Lead Thin Shrink Small Outline Package TSSOP</b> + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>20-Lead Thin Shrink Small Outline Package TSSOP</b> <br><br> +Source: https://www.analog.com/media/en/package-pcb-resources/package/380523655245964505593671154107510036154ru24.pdf<br> + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +105312-1204 Nano-Fit™ Vertical Header, Through Hole, Dual Row, 4 Circuits + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>EAGLE Design Rules</b> +<p> +Die Standard-Design-Rules sind so gewählt, dass sie für +die meisten Anwendungen passen. Sollte ihre Platine +besondere Anforderungen haben, treffen Sie die erforderlichen +Einstellungen hier und speichern die Design Rules unter +einem neuen Namen ab. +<b>EAGLE Design Rules</b> +<p> +The default Design Rules have been set to cover +a wide range of applications. Your particular design +may have different requirements, so please make the +necessary adjustments and save your customized +design rules under a new name. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch index 593d8009..c3e2f979 100644 --- a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch +++ b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch @@ -5382,9 +5382,10 @@ Layer: 94 Symbol - - + + + From b0b33287a98c1be24ee2d30a0a7b837eb26570be Mon Sep 17 00:00:00 2001 From: Josh Kirshenbaum Date: Sat, 31 Oct 2020 17:10:41 -0400 Subject: [PATCH 07/15] more board work --- .../DAC and Digipot Breakout Board.brd | 249 +++++++++++------- .../DAC and Digipot Breakout Board.sch | 38 +-- 2 files changed, 178 insertions(+), 109 deletions(-) diff --git a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd index 918bba65..d303bc66 100644 --- a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd +++ b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd @@ -739,13 +739,13 @@ design rules under a new name. - - - + + + - - - + + + @@ -755,9 +755,9 @@ design rules under a new name. - - - + + + @@ -775,13 +775,13 @@ design rules under a new name. - - - + + + - - - + + + @@ -820,9 +820,9 @@ design rules under a new name. - - - + + + @@ -831,17 +831,17 @@ design rules under a new name. - - + + - - + + - - + + - - + + @@ -874,13 +874,18 @@ design rules under a new name. - - - + + + + + + + + + - - + @@ -940,29 +945,34 @@ design rules under a new name. - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + - + @@ -987,8 +997,24 @@ design rules under a new name. - - + + + + + + + + + + + + + + + + + + @@ -1001,10 +1027,21 @@ design rules under a new name. - - - - + + + + + + + + + + + + + + + @@ -1027,40 +1064,67 @@ design rules under a new name. - + + + + + + + + + - - - + + + + + + + - - - + + + + + + + - - + + + + - - + + + + + + - - + + + + + + + @@ -1069,57 +1133,57 @@ design rules under a new name. - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + @@ -1134,21 +1198,26 @@ design rules under a new name. - - + + + + + + + - - + + - - + + @@ -1168,8 +1237,8 @@ design rules under a new name. - - + + diff --git a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch index c3e2f979..02a3985c 100644 --- a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch +++ b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch @@ -5488,9 +5488,9 @@ Layer: 94 Symbol @@ -5505,9 +5505,9 @@ Layer: 94 Symbol @@ -5551,9 +5551,9 @@ Layer: 94 Symbol - - - @@ -5713,27 +5713,27 @@ Layer: 94 Symbol - - - - - - - - - + + + + + + From f9c1c26601738f62fb5d9ed15cb6d21d86a7b849 Mon Sep 17 00:00:00 2001 From: Josh Kirshenbaum Date: Sun, 1 Nov 2020 13:33:04 -0500 Subject: [PATCH 08/15] Finish routing board with some bottom traces --- .../DAC and Digipot Breakout Board.brd | 324 ++++++++++++------ .../DAC and Digipot Breakout Board.sch | 82 +++-- 2 files changed, 259 insertions(+), 147 deletions(-) diff --git a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd index d303bc66..f018b5b8 100644 --- a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd +++ b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd @@ -187,10 +187,10 @@ - - - - + + + + @@ -747,9 +747,9 @@ design rules under a new name. - - - + + + @@ -767,9 +767,9 @@ design rules under a new name. - - - + + + @@ -779,41 +779,41 @@ design rules under a new name. - - - + + + - - - + + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + @@ -824,24 +824,24 @@ design rules under a new name. - - - + + + - - + + - - + + - - + + - - + + - - + + @@ -858,7 +858,15 @@ design rules under a new name. - + + + + + + + + + @@ -876,16 +884,29 @@ design rules under a new name. - + + - - - + + + + + + + + + + + + + + + @@ -924,7 +945,8 @@ design rules under a new name. - + + @@ -951,7 +973,8 @@ design rules under a new name. - + + @@ -967,15 +990,35 @@ design rules under a new name. - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - @@ -1008,13 +1051,17 @@ design rules under a new name. - + + - + + + + @@ -1039,9 +1086,22 @@ design rules under a new name. + + + + + + + + + + + + + + - @@ -1049,7 +1109,7 @@ design rules under a new name. - + @@ -1073,6 +1133,12 @@ design rules under a new name. + + + + + + @@ -1082,8 +1148,7 @@ design rules under a new name. - - + @@ -1093,8 +1158,7 @@ design rules under a new name. - - + @@ -1102,8 +1166,8 @@ design rules under a new name. - - + + @@ -1113,8 +1177,7 @@ design rules under a new name. - - + @@ -1126,64 +1189,94 @@ design rules under a new name. - - - - - - + + + + + + + + - - + + + + + - - - + + + + + + + + + + - - - + + + + - - - + + + + + + + + - - + + + - - - + + + + + + + + + + - - - + + + + + + + @@ -1210,21 +1303,32 @@ design rules under a new name. - + + + + + - - - + + + + - - + + + + + + + + @@ -1248,6 +1352,16 @@ design rules under a new name. + + + + + + + + + + diff --git a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch index 02a3985c..bb26dd71 100644 --- a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch +++ b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch @@ -5475,6 +5475,11 @@ Layer: 94 Symbol + + + @@ -5556,13 +5561,6 @@ Layer: 94 Symbol - - - - - @@ -5570,15 +5568,15 @@ Layer: 94 Symbol - - - + + + @@ -5604,15 +5602,15 @@ Layer: 94 Symbol - - - + + + @@ -5621,15 +5619,15 @@ Layer: 94 Symbol - - - + + + + @@ -5638,15 +5636,15 @@ Layer: 94 Symbol - - - + + + @@ -5672,15 +5670,15 @@ Layer: 94 Symbol - - - + + + @@ -5689,15 +5687,15 @@ Layer: 94 Symbol - - - + + + + @@ -5742,15 +5740,15 @@ Layer: 94 Symbol - - - + + + + From 17ae847c3fc25b68c37fc15c604ad4baae0a4b56 Mon Sep 17 00:00:00 2001 From: Josh Kirshenbaum Date: Tue, 3 Nov 2020 19:37:09 -0500 Subject: [PATCH 09/15] all my homies hate drc --- .../DAC and Digipot Breakout Board.brd | 164 ++++++++---------- 1 file changed, 75 insertions(+), 89 deletions(-) diff --git a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd index f018b5b8..55913be7 100644 --- a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd +++ b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd @@ -547,40 +547,29 @@ Source: https://www.analog.com/media/en/package-pcb-resources/package/3805236552 - -<b>EAGLE Design Rules</b> + +<b>On Campus Design Rules (2 Layers)</b> <p> -Die Standard-Design-Rules sind so gewählt, dass sie für -die meisten Anwendungen passen. Sollte ihre Platine -besondere Anforderungen haben, treffen Sie die erforderlichen -Einstellungen hier und speichern die Design Rules unter -einem neuen Namen ab. -<b>EAGLE Design Rules</b> -<p> -The default Design Rules have been set to cover -a wide range of applications. Your particular design -may have different requirements, so please make the -necessary adjustments and save your customized -design rules under a new name. +The default Design Rules have been set to cover a wide range of applications. This is designed for use in the <a href="https://www.me.gatech.edu/facilities/electronic_lab">ME Electronics Lab</a>, the <a href="https://hive.ece.gatech.edu/">Hive</a>, and the <a href="https://inventionstudio.gatech.edu/">Invention Studio</a>. - - - - - - - - - + + + + + + + + + - + - - + + @@ -623,12 +612,12 @@ design rules under a new name. - + - + @@ -886,12 +875,6 @@ design rules under a new name. - - - - - - @@ -906,7 +889,13 @@ design rules under a new name. - + + + + + + + @@ -945,8 +934,7 @@ design rules under a new name. - - + @@ -967,20 +955,21 @@ design rules under a new name. - - + + - - + + + - - + + - - - - + + + + @@ -999,10 +988,6 @@ design rules under a new name. - - - - @@ -1016,7 +1001,9 @@ design rules under a new name. - + + + @@ -1040,17 +1027,15 @@ design rules under a new name. - - - - + + - - + + @@ -1074,8 +1059,6 @@ design rules under a new name. - - @@ -1099,6 +1082,8 @@ design rules under a new name. + + @@ -1145,9 +1130,8 @@ design rules under a new name. - - - + + @@ -1183,11 +1167,11 @@ design rules under a new name. - - - - - + + + + + @@ -1205,10 +1189,10 @@ design rules under a new name. - - - - + + + + @@ -1249,8 +1233,10 @@ design rules under a new name. - - + + + + @@ -1258,11 +1244,11 @@ design rules under a new name. - + - - + + @@ -1294,10 +1280,10 @@ design rules under a new name. - - + + - + @@ -1313,8 +1299,9 @@ design rules under a new name. - - + + + @@ -1324,19 +1311,19 @@ design rules under a new name. - - - - + + + + - + - + @@ -1356,7 +1343,6 @@ design rules under a new name. - From 5d638ba1cf4a10b5ee5d5cf0968fc63d7bd11790 Mon Sep 17 00:00:00 2001 From: Josh Kirshenbaum Date: Thu, 5 Nov 2020 19:46:49 -0500 Subject: [PATCH 10/15] restarted board to match on campus drc --- .../DAC and Digipot Breakout Board.brd | 607 ++++++------------ 1 file changed, 181 insertions(+), 426 deletions(-) diff --git a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd index 55913be7..07fdf5ee 100644 --- a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd +++ b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd @@ -187,10 +187,10 @@ - - - - + + + + @@ -612,7 +612,7 @@ The default Design Rules have been set to cover a wide range of applications. Th - + @@ -720,119 +720,119 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - - + + + - - - - + + + + - - - + + + - - + + - - + + - - + + - - + + - - + + - + @@ -841,21 +841,14 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - - - - - - - - - - - - - + + + + + + + + @@ -867,35 +860,15 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + @@ -922,131 +895,50 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - + - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + @@ -1054,282 +946,154 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + - - - + + - - - - - - - - - - - - - - - - - - - - - - - + + + - - - - + + - - - - - + + - - - - + + - - - - - + + - - - - - - + - - - - - - - + + - - - - - + + - - - - - - - - - + + - - - + + - - - - - - - + + - - - - - + + - - - - - - - - - + + - - - - - - + + - - - - - - - - + - - - - - - + - - - - - + - - - - + + - - - - - - - - + + - - - - + - - + @@ -1339,15 +1103,6 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - - - - - - - From 1c583168637f60bedca67c9b6acfb16671dd217d Mon Sep 17 00:00:00 2001 From: Josh Kirshenbaum Date: Thu, 5 Nov 2020 21:40:06 -0500 Subject: [PATCH 11/15] redo board with on campus 2 layer drc --- .../DAC and Digipot Breakout Board.brd | 704 ++++++++++++------ .../DAC and Digipot Breakout Board.sch | 335 ++++----- 2 files changed, 636 insertions(+), 403 deletions(-) diff --git a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd index 07fdf5ee..82fbff99 100644 --- a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd +++ b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd @@ -187,10 +187,10 @@ - - - - + + + + @@ -484,40 +484,6 @@ - -<b>20-Lead Thin Shrink Small Outline Package TSSOP</b> <br><br> -Source: https://www.analog.com/media/en/package-pcb-resources/package/380523655245964505593671154107510036154ru24.pdf<br> - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - 105312-1204 Nano-Fit™ Vertical Header, Through Hole, Dual Row, 4 Circuits @@ -536,6 +502,41 @@ Source: https://www.analog.com/media/en/package-pcb-resources/package/3805236552 + +<b>20-Lead Thin Shrink Small Outline Package TSSOP</b> <br><br> +Source: https://www.analog.com/media/en/package-pcb-resources/package/380523655245964505593671154107510036154ru24.pdf<br> + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + @@ -720,119 +721,119 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - - + + + - - - + + + - - - + + - - + + - - + + - - + + - - + + - - + + + + - @@ -841,14 +842,17 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - - - - - - + + + + + + + + + + + @@ -858,17 +862,41 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -890,210 +918,394 @@ The default Design Rules have been set to cover a wide range of applications. Th + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + - + + + + + + + + + + + + + + + - - - + + + + + + + + + + + + + + + + + + + + + + - - - - + + + + + + - - + + + + + + + + + + + + + + + + + + + + + - - - + + + + + + + - - + + + + + - - + + + + + - - + + + + + - - + + + + + - - + + + + + - - - - + + + + + + + + + + + - - - + + + + + + + - - - - + + + + + + + + + + - - - - + + + + + + - - - - + + + + + + + + + + - - - - + + + + + + - - - - + + + + + + + + + + + + + - - - - + + + + + + + - + + + + + + + + + + - - + + + + + + - - + + + + - - - - + + + + + + - - + + + + + + + + + + + + - + + + - + + + @@ -1103,6 +1315,24 @@ The default Design Rules have been set to cover a wide range of applications. Th + + + + + + + + + + + + + + + + + + diff --git a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch index bb26dd71..f9bdcc03 100644 --- a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch +++ b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch @@ -1212,36 +1212,37 @@ Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pd <b>20-Lead Thin Shrink Small Outline Package TSSOP</b> <br><br> Source: https://www.analog.com/media/en/package-pcb-resources/package/380523655245964505593671154107510036154ru24.pdf<br> - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + ->NAME ->VALUE +>NAME +>VALUE + @@ -1446,33 +1447,35 @@ Source: https://www.analog.com/media/en/package-pcb-resources/package/3805236552 >VALUE - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + - - + + +>NAME +>VALUE @@ -4980,9 +4983,9 @@ Layer: 94 Symbol - + @@ -5059,20 +5062,20 @@ Layer: 94 Symbol - - + + - - + + - - + + - - + + - - + + @@ -5120,7 +5123,7 @@ Layer: 94 Symbol - + @@ -5128,12 +5131,12 @@ Layer: 94 Symbol - - - + + + - - + + @@ -5165,12 +5168,15 @@ Layer: 94 Symbol - - - + + + + + - - + + + @@ -5221,8 +5227,8 @@ Layer: 94 Symbol - - + + @@ -5239,13 +5245,13 @@ Layer: 94 Symbol - - - + + - - + + + @@ -5311,7 +5317,7 @@ Layer: 94 Symbol - + @@ -5349,35 +5355,32 @@ Layer: 94 Symbol - - - + + + - - - - - - - - + - + + + + + + + - - - - + - - - - + + + + + - + @@ -5405,8 +5408,8 @@ Layer: 94 Symbol - - @@ -5436,10 +5439,10 @@ Layer: 94 Symbol - - + - + + @@ -5476,8 +5479,8 @@ Layer: 94 Symbol - - @@ -5556,15 +5559,15 @@ Layer: 94 Symbol - - - - - @@ -5573,15 +5576,15 @@ Layer: 94 Symbol - - - - @@ -5597,8 +5600,8 @@ Layer: 94 Symbol - - @@ -5607,15 +5610,15 @@ Layer: 94 Symbol - - - - @@ -5624,15 +5627,15 @@ Layer: 94 Symbol - - - - - @@ -5641,32 +5644,32 @@ Layer: 94 Symbol - - - - - - - + + + - - @@ -5675,15 +5678,15 @@ Layer: 94 Symbol - - - - @@ -5692,9 +5695,9 @@ Layer: 94 Symbol - - - @@ -5716,15 +5719,15 @@ Layer: 94 Symbol - - - - - @@ -5735,8 +5738,8 @@ Layer: 94 Symbol - - @@ -5745,20 +5748,20 @@ Layer: 94 Symbol - - - - - + + - - + + From 95e0411e6ba42f1f8eaa709872578a2205537bbd Mon Sep 17 00:00:00 2001 From: Josh Kirshenbaum Date: Sun, 8 Nov 2020 15:18:22 -0500 Subject: [PATCH 12/15] fix according to ethan suggestions --- .../DAC and Digipot Breakout Board.brd | 136 ++++++++++-------- .../DAC and Digipot Breakout Board.sch | 10 ++ 2 files changed, 84 insertions(+), 62 deletions(-) diff --git a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd index 82fbff99..88395601 100644 --- a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd +++ b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd @@ -187,10 +187,10 @@ - - - - + + + + @@ -749,21 +749,21 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - + + + - - - + + + - - - + + + @@ -777,7 +777,7 @@ The default Design Rules have been set to cover a wide range of applications. Th - + @@ -829,7 +829,7 @@ The default Design Rules have been set to cover a wide range of applications. Th - + @@ -842,17 +842,17 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - - + + + + - - + + @@ -879,10 +879,11 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - - + + + + + @@ -918,17 +919,19 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - - + + + + + + - - + + @@ -937,11 +940,9 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - - + + @@ -953,13 +954,14 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - - - - - + + + + + + + + @@ -991,9 +993,15 @@ The default Design Rules have been set to cover a wide range of applications. Th + + + + + + - + @@ -1059,9 +1067,9 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - + + + @@ -1086,13 +1094,13 @@ The default Design Rules have been set to cover a wide range of applications. Th - + - - - - - + + + + + @@ -1145,16 +1153,20 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - - - + + - + + + + + + + + @@ -1193,13 +1205,13 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - + + + - + diff --git a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch index f9bdcc03..ee440115 100644 --- a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch +++ b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch @@ -4986,6 +4986,7 @@ Layer: 94 Symbol + @@ -5178,6 +5179,9 @@ Layer: 94 Symbol + + + @@ -5382,6 +5386,12 @@ Layer: 94 Symbol + + + + + + From 2e4c59d23a965b61fd504f5eb0b7c20debbf2a84 Mon Sep 17 00:00:00 2001 From: Josh Kirshenbaum Date: Tue, 1 Dec 2020 20:42:47 -0500 Subject: [PATCH 13/15] add pad for ground --- .../DAC and Digipot Breakout Board.brd | 51 ++++++----- .../DAC and Digipot Breakout Board.sch | 88 +++++++++++-------- 2 files changed, 78 insertions(+), 61 deletions(-) diff --git a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd index 88395601..1e458032 100644 --- a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd +++ b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd @@ -834,6 +834,9 @@ The default Design Rules have been set to cover a wide range of applications. Th + + + @@ -872,7 +875,8 @@ The default Design Rules have been set to cover a wide range of applications. Th - + + @@ -885,8 +889,7 @@ The default Design Rules have been set to cover a wide range of applications. Th - - + @@ -898,6 +901,8 @@ The default Design Rules have been set to cover a wide range of applications. Th + + @@ -999,6 +1004,8 @@ The default Design Rules have been set to cover a wide range of applications. Th + + @@ -1079,21 +1086,17 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - - - + - - + + @@ -1101,6 +1104,9 @@ The default Design Rules have been set to cover a wide range of applications. Th + + + @@ -1145,7 +1151,7 @@ The default Design Rules have been set to cover a wide range of applications. Th - + @@ -1153,7 +1159,6 @@ The default Design Rules have been set to cover a wide range of applications. Th - @@ -1253,7 +1258,7 @@ The default Design Rules have been set to cover a wide range of applications. Th - + @@ -1262,6 +1267,8 @@ The default Design Rules have been set to cover a wide range of applications. Th + + @@ -1273,11 +1280,16 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - + + + + + + + + @@ -1336,13 +1348,6 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - - - - - diff --git a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch index ee440115..8440e450 100644 --- a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch +++ b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch @@ -4987,6 +4987,8 @@ Layer: 94 Symbol + + @@ -5097,18 +5099,18 @@ Layer: 94 Symbol - - - - + + + + - - - - - - - + + + + + + + @@ -5179,8 +5181,12 @@ Layer: 94 Symbol - - + + + + + + @@ -5388,10 +5394,16 @@ Layer: 94 Symbol - - + + + + + + + + @@ -5463,13 +5475,13 @@ Layer: 94 Symbol - - - - @@ -5502,13 +5514,13 @@ Layer: 94 Symbol - - - - @@ -5519,13 +5531,13 @@ Layer: 94 Symbol - - - - @@ -5536,13 +5548,13 @@ Layer: 94 Symbol - - - - @@ -5553,13 +5565,13 @@ Layer: 94 Symbol - - - - @@ -5741,9 +5753,9 @@ Layer: 94 Symbol - - - From 2a5d793ccb424ec22dbe286915a462665f5268d9 Mon Sep 17 00:00:00 2001 From: Josh Kirshenbaum Date: Thu, 21 Jan 2021 20:52:37 -0500 Subject: [PATCH 14/15] add ratsnest --- .../DAC and Digipot Breakout Board.brd | 20 +++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd index 1e458032..3c415790 100644 --- a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd +++ b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd @@ -1006,9 +1006,18 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - + + + + + + + + + + + + @@ -1067,8 +1076,6 @@ The default Design Rules have been set to cover a wide range of applications. Th - - @@ -1116,7 +1123,6 @@ The default Design Rules have been set to cover a wide range of applications. Th - @@ -1126,7 +1132,6 @@ The default Design Rules have been set to cover a wide range of applications. Th - @@ -1146,7 +1151,6 @@ The default Design Rules have been set to cover a wide range of applications. Th - From f25936eab609888757e7fb06db3bd4c4b210778e Mon Sep 17 00:00:00 2001 From: Josh Kirshenbaum Date: Thu, 18 Feb 2021 16:10:48 -0500 Subject: [PATCH 15/15] fix drill size --- .../DAC and Digipot Breakout Board.brd | 366 +++++++++--------- .../DAC and Digipot Breakout Board.sch | 275 ++++++------- 2 files changed, 323 insertions(+), 318 deletions(-) diff --git a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd index 3c415790..9a4a8de9 100644 --- a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd +++ b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd @@ -443,47 +443,6 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 105312-1204 Nano-Fit™ Vertical Header, Through Hole, Dual Row, 4 Circuits @@ -537,6 +496,48 @@ Source: https://www.analog.com/media/en/package-pcb-resources/package/3805236552 >VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +3.2 + @@ -809,7 +810,6 @@ The default Design Rules have been set to cover a wide range of applications. Th - @@ -837,6 +837,7 @@ The default Design Rules have been set to cover a wide range of applications. Th + @@ -860,60 +861,54 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - - - - - - - - - + - - + - - - + + - - - - - - + + + + + + - - - + + + + + + + + + + + - - @@ -924,12 +919,9 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - @@ -939,46 +931,22 @@ The default Design Rules have been set to cover a wide range of applications. Th - - + - - - - - - - - - - - - - + - - - - - - - + + + - - - - - - - - + @@ -997,7 +965,6 @@ The default Design Rules have been set to cover a wide range of applications. Th - @@ -1018,6 +985,32 @@ The default Design Rules have been set to cover a wide range of applications. Th + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -1028,33 +1021,31 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - - - - - - - - - - + + + + + + + + + + + + - - @@ -1062,20 +1053,21 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - - - - - - - + + + + + + + + - + - - + + + + @@ -1087,33 +1079,33 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - - - - - - + + + + + + + - + - - - - - - - - + + + + + + + + + @@ -1154,11 +1146,12 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - - + + + + + @@ -1259,41 +1252,44 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - - - - - - - + + + + - - - + + + + + + + + + + + + + + - - - - - + + + - - - - - - - + + + + + + @@ -1315,7 +1311,7 @@ The default Design Rules have been set to cover a wide range of applications. Th - + @@ -1335,6 +1331,9 @@ The default Design Rules have been set to cover a wide range of applications. Th + + + @@ -1344,15 +1343,18 @@ The default Design Rules have been set to cover a wide range of applications. Th - - - - - - - + + + + + + + + + + diff --git a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch index 8440e450..ea1998ae 100644 --- a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch +++ b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch @@ -490,47 +490,6 @@ It has reduced top mask to make it harder to put the component on the wrong side - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - <b>Mini-Fit Junior connector 4 pole</b><p> Source: http://www.molex.com @@ -1244,6 +1203,48 @@ Source: https://www.analog.com/media/en/package-pcb-resources/package/3805236552 >VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +3.2 + @@ -1270,41 +1271,6 @@ Source: https://www.analog.com/media/en/package-pcb-resources/package/3805236552 - - - - - - - - -Teensy 3.2 - - - - - - - - - - - - - - - - - - - - - - - - - - @@ -1477,6 +1443,41 @@ Source: https://www.analog.com/media/en/package-pcb-resources/package/3805236552 >NAME >VALUE + + + + + + + + +Teensy 3.2 + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -1651,49 +1652,6 @@ Standard 0603 ceramic capacitor, and 0.1" leaded capacitor. - -Simple version of the Teensy 3.2 board that only uses the 2 main rows of pins, not the inner pins or the pins opposite the usb port. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - <b>Mini-Fit Junior connector 4 pole</b><p> Source: http://www.molex.com @@ -2259,6 +2217,49 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. + +Simple version of the Teensy 3.2 board that only uses the 2 main rows of pins, not the inner pins or the pins opposite the usb port. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -4928,7 +4929,6 @@ Layer: 94 Symbol - @@ -4989,6 +4989,7 @@ Layer: 94 Symbol + @@ -5019,7 +5020,6 @@ Layer: 94 Symbol - @@ -5188,6 +5188,7 @@ Layer: 94 Symbol + @@ -5229,10 +5230,10 @@ Layer: 94 Symbol - + @@ -5278,8 +5279,8 @@ Layer: 94 Symbol - + @@ -5303,12 +5304,6 @@ Layer: 94 Symbol - - - - - - @@ -5420,9 +5415,9 @@ Layer: 94 Symbol - @@ -5437,10 +5432,10 @@ Layer: 94 Symbol - + @@ -5491,9 +5486,9 @@ Layer: 94 Symbol - @@ -5581,9 +5576,9 @@ Layer: 94 Symbol - @@ -5724,9 +5719,9 @@ Layer: 94 Symbol - @@ -5741,9 +5736,9 @@ Layer: 94 Symbol - @@ -5753,9 +5748,9 @@ Layer: 94 Symbol - @@ -5800,6 +5795,14 @@ Layer: 94 Symbol + + + + + + + +