diff --git a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd new file mode 100644 index 00000000..9a4a8de9 --- /dev/null +++ b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.brd @@ -0,0 +1,1361 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + +Solder Pad +0.1" x 0.05" + +>NAME + + +<b>16-Lead Thin Shrink Small Outline Package TSSOP</b> + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + +105312-1204 Nano-Fit™ Vertical Header, Through Hole, Dual Row, 4 Circuits + + + + + + + + + + + + + + + + + +<b>20-Lead Thin Shrink Small Outline Package TSSOP</b> <br><br> +Source: https://www.analog.com/media/en/package-pcb-resources/package/380523655245964505593671154107510036154ru24.pdf<br> + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +3.2 + + + + + + + + + + + + + +<b>On Campus Design Rules (2 Layers)</b> +<p> +The default Design Rules have been set to cover a wide range of applications. This is designed for use in the <a href="https://www.me.gatech.edu/facilities/electronic_lab">ME Electronics Lab</a>, the <a href="https://hive.ece.gatech.edu/">Hive</a>, and the <a href="https://inventionstudio.gatech.edu/">Invention Studio</a>. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch new file mode 100644 index 00000000..ea1998ae --- /dev/null +++ b/EAGLE Board Designs/Testing and Practice Boards/Breakout Boards/DAC and Digipot Breakout Board.sch @@ -0,0 +1,5811 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>16-Lead Thin Shrink Small Outline Package TSSOP</b> + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + +>Name +>Value + + + + + + + + + +>Name +>Value + + + + +>NAME +>VALUE + + + + + + + + + + + + +>Name +>Value + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b><p> +chip + + + + + + + + + +>NAME +>VALUE + + + + + + + + +>Name +>Value + + + + + + + + + + + + +>Name +>Value + + + + + + + + + + +>NAME +>VALUE + + +<p><b>Generic 3216 (1206) package</b></p> +<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p> +<p>Source: Sparkfun Resistors Library</p> + + + + + + + + +>NAME +>VALUE + + + + + +CTZ3 Series land pattern for variable capacitor - CTZ3E-50C-W1-PF + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<h3>CAP-PTH-SMALL-KIT</h3> +Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571).<br> +<br> +<b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +This is the "EZ" version of the .1" spaced ceramic thru-hole cap.<br> +It has reduced top mask to make it harder to put the component on the wrong side of the board. + + + + + + + +>Name +>Value + + + + + + + + + + + +<b>Mini-Fit Junior connector 4 pole</b><p> +Source: http://www.molex.com + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + +105312-1204 Nano-Fit™ Vertical Header, Through Hole, Dual Row, 4 Circuits + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +19428-0011 +<br> +<br> +MX150L™ Vertical PCB Header + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Solder Pad +0.1" x 0.05" + +>NAME + + +This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. +You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). +This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" +to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. +Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also, +if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment +will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. +<br> +<br> +<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. +You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). +This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" +to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. +Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also, +if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment +will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. +<br> +<br> +<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + +>Name +>Value + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + +<b>CAPACITOR</b><p> +chip + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>RESISTOR</b><p> +chip + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + +>NAME +>VALUE + + +This is the "EZ" version of the standard .3" spaced resistor package.<br> +It has a reduced top mask to make it harder to install upside-down. + + + + + + + + + + + + + + +>Name +>Value + + +<h3>AXIAL-0.3-KIT</h3> + +Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.<br> +<br> + +<b>Warning:</b> This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. + + + + + + + + + + +>Name +>Value + + + + + + + + + + + + + + + + + + + + + + + + + + +1/2W Resistor, 0.5" wide<p> + +Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> + + + + + + +>Name +>Value + + +1/4W Resistor, 0.4" wide<p> + +Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> + + + + + + +>Name +>Value + + + + + + + + +>Name +>Value + + + + + + + + + + + + + +>Name +>Value + + +1/6W Thru-hole Resistor - *UNPROVEN* + + + + + + +>NAME +>VALUE + + +1W Resistor, 0.6" wide<p> + +Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> + + + + + + +>Name +>Value + + +2W Resistor, 0.8" wide<p> + +Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> + + + + + + +>Name +>Value + + + + + + + + +POWER RESISTOR + + + + + + + + + + + +<b>20-Lead Thin Shrink Small Outline Package TSSOP</b> <br><br> +Source: https://www.analog.com/media/en/package-pcb-resources/package/380523655245964505593671154107510036154ru24.pdf<br> + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +3.2 + + + + + + + + + + + +>NAME +>VALUE +GND +IN +OUT + + + + +>NAME +>VALUE + + + + + + + + +>NAME +>VALUE + + + + +>NAME + + +Solder pad used to solder wires onto PCB + + + + +<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> + + + + + + +>VALUE +>NAME + + + + +<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> + + + + + + + + +>VALUE +>NAME + + + + + + + + + +JUMP + + +<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> + + + + + + + + + + + + +>VALUE +>NAME + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + +Teensy 3.2 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Murata OKI-78SR 5V 1.5A Non-Isolated Switching Regulator DC/DC - <a href="https://power.murata.com/data/power/oki-78sr.pdf">Datasheet</a> + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Capacitor</b> +Standard 0603 ceramic capacitor, and 0.1" leaded capacitor. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Mini-Fit Junior connector 4 pole</b><p> +Source: http://www.molex.com + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Solder pad used to attach wires directly to PCB + + + + + + + + + + + + + + + +Standard 2-pin 0.1" header. +<br> +<br> +NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS... +This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment +will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. +<br> +<br> +Note: The Sparkfun version includes many other packages including surface mount that may be of future interest. +<br> +<br> +<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Standard 4-pin 0.1" header. +<br> +<br> +NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS... +This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment +will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. +<br> +<br> +Note: The Sparkfun version includes many other packages including surface mount that may be of future interest. +<br> +<br> +<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Jumper for changing operation of a device + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Standard 9-pin 0.1" header. +<br> +<br> +<a href="https://github.com/sparkfun/SparkFun-Eagle-Libraries">Source: Sparkfun</a> + + + + + + + + + + + + + + + + + + + + + + + +<b>Resistor</b> +Basic schematic elements and footprints for 0603, 1206, and PTH resistors. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +AD5721 Digital to Analog Converter <br> +12-bit resolution <br> +<a href="https://www.analog.com/media/en/technical-documentation/data-sheets/ad5761_5721.pdf"> Datasheet </a> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +AD5684 4-channel DAC <br> +5V, 12-bit resolution <br> +<a href="https://www.analog.com/media/en/technical-documentation/data-sheets/AD5686_5684.pdf">Datasheet </a> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +AD5263 Digital Potentiometer <br> +<a href="https://www.analog.com/media/en/technical-documentation/data-sheets/AD5263.pdf"> Datasheet </a> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Simple version of the Teensy 3.2 board that only uses the 2 main rows of pins, not the inner pins or the pins opposite the usb port. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>VALUE + + + + + +>VALUE + + + + +>VALUE + + + + + +>VALUE + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + + + + + + + + + + +Standard document field for HyTech Schematics. + + + + + + + + + + + + +Date: +>LAST_DATE_TIME +Sheet: +Engineer: +Document Name: +Description: + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>DRAWING_NAME +>SHEET + + + + +HyTech Racing Frame (ANSI Size B) +<br> +Prints on US Tabloid Landscape 11" by 17" +<br><br> +Fill Engineer/Description Fields with Text using the following settings: +<br> +Size: 0.1 +<br> +Ratio: 8% +<br> +Line Distance: 50% +<br> +Font: Proportional +<br> +Layer: 94 Symbol + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Josh Kirshenbaum +Breakout board to test DACs AD5721, AD5684 and digital potentiometer AD5263 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +