Incorrect Resolution outputted to monitors

[thanikTheDev]

Using the latest git and have been having this issue since the introduction of aquamarine. It's also been inconsistent as well. I have 3 monitors and sometimes 2 out of the 3 are working, sometimes none. Haven't the issue running sway and I've also tried changing my cables. I've also tried AQ_NO_MODIFIERS which didn't yield anything different. Only thing that seems to work AQ_NO_ATOMIC to use the legacy drm backend (I know terrible idea).

hyprland.log

[vaxerski]

can you try to set an explicit mode for each monitor (not auto or preferred or highres etc)

[thanikTheDev]

Tried 3 times with the same config with different results

Attempt 1: DVI-D-1 and DP-1 had no output, DVI-D-2 had the same incorrect resolution as shown in the screenshot. Couldn't grab the log

Attempt 2: DVI-D-1 and DP-1 outputted, DVI-D-2 had no output
hyprland_explicit_resolution.log

Attempt 3: Enabled DRM debugging. DVI-D-1 and DP-1 outputted, DVI-D-2 struggled to output constantly flickering between no output for a couple of seconds to outputting with some screen tearing (don't really know how else to explain it) for a second
hyprland_drm_debug_enabled.log
dmesg.log
dmesg2.log

[thanikTheDev]

I also tried dropping the refresh rate to 60Hz on all 3 monitors and got and even weirder result. All monitors were outputting but DP-1 and DVI-D-2 were mirrored... hyprctl says they shouldn't be

hyprland_duplicate_monitors.log
recording.mp4