UDP Broadcast

[sragas]

Hi,

just stumbled across your project and it seems to fit my needs perfectly. I planning to integrate the pico device into Home Assistant. The only issue I have, is that the pico device is not sending any UDP data. Do I need to enable anything on the device? At this moment the pico is only by it self without any additional devices. Just a battery with internal voltage sensor is configured for testing.

Do you may have any advise?
Thank you in advance!

Stefan

[htool]

I'm using my Pico in 'dhcp' mode, not 'ap' mode. That could be a difference.
In AP mode it may not broadcast, as it knows which IP a phone is connected to.

The manual also mentions UDP IP/port - that's where the live data is sent to.

Also, the script currently is hardcoded to my config, so you'll need to edit it to accommodate your setup.