sample-config.js

// Everything is explained here:
// @link https://github.com/askmike/gekko/blob/stable/docs/Configuring_gekko.md

var config = {};

// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//                          GENERAL SETTINGS
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

config.debug = true; // for additional logging / debugging

// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//                         WATCHING A MARKET
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

// Monitor the live market
config.watch = {

  // see https://github.com/askmike/gekko#supported-exchanges
  exchange: 'Bitstamp',
  currency: 'USD',
  asset: 'BTC'
}

// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//                       CONFIGURING TRADING ADVICE
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

config.tradingAdvisor = {
  enabled: true,
  method: 'MACD',
  candleSize: 60,
  historySize: 25,
  adapter: 'sqlite',
  talib: {
    enabled: false,
    version: '1.0.2'
  }
}

// Exponential Moving Averages settings:
config.DEMA = {
  // EMA weight (α)
  // the higher the weight, the more smooth (and delayed) the line
  short: 10,
  long: 21,
  // amount of candles to remember and base initial EMAs on
  // the difference between the EMAs (to act as triggers)
  thresholds: {
    down: -0.025,
    up: 0.025
  }
};

// MACD settings:
config.MACD = {
  // EMA weight (α)
  // the higher the weight, the more smooth (and delayed) the line
  short: 10,
  long: 21,
  signal: 9,
  // the difference between the EMAs (to act as triggers)
  thresholds: {
    down: -0.025,
    up: 0.025,
    // How many candle intervals should a trend persist
    // before we consider it real?
    persistence: 1
  }
};

// PPO settings:
config.PPO = {
  // EMA weight (α)
  // the higher the weight, the more smooth (and delayed) the line
  short: 12,
  long: 26,
  signal: 9,
  // the difference between the EMAs (to act as triggers)
  thresholds: {
    down: -0.025,
    up: 0.025,
    // How many candle intervals should a trend persist
    // before we consider it real?
    persistence: 2
  }
};

// Uses one of the momentum indicators but adjusts the thresholds when PPO is bullish or bearish
// Uses settings from the ppo and momentum indicator config block
config.varPPO = {
  momentum: 'TSI', // RSI, TSI or UO
  thresholds: {
    // new threshold is default threshold + PPOhist * PPOweight
    weightLow: 120,
    weightHigh: -120,
    // How many candle intervals should a trend persist
    // before we consider it real?
    persistence: 0
  }
};

// RSI settings:
config.RSI = {
  interval: 14,
  thresholds: {
    low: 30,
    high: 70,
    // How many candle intervals should a trend persist
    // before we consider it real?
    persistence: 1
  }
};

// TSI settings:
config.TSI = {
  short: 13,
  long: 25,
  thresholds: {
    low: -25,
    high: 25,
    // How many candle intervals should a trend persist
    // before we consider it real?
    persistence: 1
  }
};

// Ultimate Oscillator Settings
config.UO = {
  first: {weight: 4, period: 7},
  second: {weight: 2, period: 14},
  third: {weight: 1, period: 28},
  thresholds: {
    low: 30,
    high: 70,
    // How many candle intervals should a trend persist
    // before we consider it real?
    persistence: 1
  }
};

// CCI Settings
config.CCI = {
    constant: 0.015, // constant multiplier. 0.015 gets to around 70% fit
    history: 90, // history size, make same or smaller than history
    thresholds: {
        up: 100, // fixed values for overbuy upward trajectory
        down: -100, // fixed value for downward trajectory
        persistence: 0 // filter spikes by adding extra filters candles
    }
};

// StochRSI settings
config.StochRSI = {
  interval: 3,
  thresholds: {
    low: 20,
    high: 80,
    // How many candle intervals should a trend persist
    // before we consider it real?
    persistence: 3
  }
};


// custom settings:
config.custom = {
  my_custom_setting: 10,
}

config['talib-macd'] = {
  parameters: {
    optInFastPeriod: 10,
    optInSlowPeriod: 21,
    optInSignalPeriod: 9
  },
  thresholds: {
    down: -0.025,
    up: 0.025,
  }
}

config['debug-advice'] = {
  wait: 1,
  advice: 'long'
}

// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//                       CONFIGURING PLUGINS
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

// Want Gekko to perform real trades on buy or sell advice?
// Enabling this will activate trades for the market being
// watched by `config.watch`.
config.trader = {
  enabled: false,
  key: '',
  secret: '',
  username: '' // your username, only required for specific exchanges.
}

config.adviceLogger = {
  enabled: true,
  muteSoft: true // disable advice printout if it's soft
}

// do you want Gekko to calculate the profit of its own advice?
config.profitSimulator = {
  enabled: true,
  // report the profit in the currency or the asset?
  reportInCurrency: true,
  // start balance, on what the current balance is compared with
  simulationBalance: {
    // these are in the unit types configured in the watcher.
    asset: 1,
    currency: 100,
  },
  // how much fee in % does each trade cost?
  fee: 0.25,
  // how much slippage/spread should Gekko assume per trade?
  slippage: 0.05
}
config.pushover = {
  enabled: false,
  sendPushoverOnStart: false,
  muteSoft: true, // disable advice printout if it's soft
  tag: '[GEKKO]',
  key: '',
  user: ''
}

// want Gekko to send a mail on buy or sell advice?
config.mailer = {
  enabled: false,       // Send Emails if true, false to turn off
  sendMailOnStart: true,    // Send 'Gekko starting' message if true, not if false

  email: '',    // Your Gmail address
  muteSoft: true, // disable advice printout if it's soft

  // You don't have to set your password here, if you leave it blank we will ask it
  // when Gekko's starts.
  //
  // NOTE: Gekko is an open source project < https://github.com/askmike/gekko >,
  // make sure you looked at the code or trust the maintainer of this bot when you
  // fill in your email and password.
  //
  // WARNING: If you have NOT downloaded Gekko from the github page above we CANNOT
  // guarantuee that your email address & password are safe!

  password: '',       // Your Gmail Password - if not supplied Gekko will prompt on startup.

  tag: '[GEKKO] ',      // Prefix all email subject lines with this

            //       ADVANCED MAIL SETTINGS
            // you can leave those as is if you
            // just want to use Gmail

  server: 'smtp.gmail.com',   // The name of YOUR outbound (SMTP) mail server.
  smtpauth: true,     // Does SMTP server require authentication (true for Gmail)
          // The following 3 values default to the Email (above) if left blank
  user: '',       // Your Email server user name - usually your full Email address 'me@mydomain.com'
  from: '',       // 'me@mydomain.com'
  to: '',       // 'me@somedomain.com, me@someotherdomain.com'
  ssl: true,        // Use SSL (true for Gmail)
  port: '',       // Set if you don't want to use the default port
}

config.pushbullet = {
    // sends pushbullets if true
  enabled: false,
    // Send 'Gekko starting' message if true
  sendMessageOnStart: true,
    // disable advice printout if it's soft
  muteSoft: true, 
    // your pushbullet API key
  key: 'xxx',
    // your email, change it unless you are Azor Ahai
  email: 'jon_snow@westeros.org',
    // will make Gekko messages start mit [GEKKO]
  tag: '[GEKKO]'
};

config.ircbot = {
  enabled: false,
  emitUpdats: false,
  channel: '#your-channel',
  server: 'irc.freenode.net',
  botName: 'gekkobot'
}

config.xmppbot = {
  enabled: false,
  emitUpdats: false,
  client_id: 'jabber_id',
  client_pwd: 'jabber_pw',
  client_host: 'jabber_server',
  client_port: 5222,
  status_msg: 'I\'m online',
  receiver: 'jabber_id_for_updates'
}

config.campfire = {
  enabled: false,
  emitUpdates: false,
  nickname: 'Gordon',
  roomId: null,
  apiKey: '',
  account: ''
}

config.redisBeacon = {
  enabled: false,
  port: 6379, // redis default
  host: '127.0.0.1', // localhost
    // On default Gekko broadcasts
    // events in the channel with
    // the name of the event, set
    // an optional prefix to the
    // channel name.
  channelPrefix: '',
  broadcast: [
    'candle'
  ]
}

config.candleWriter = {
  adapter: 'sqlite',
  enabled: true
}

// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//                       CONFIGURING ADAPTER
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~






config.adapters = {
  sqlite: {
    path: 'plugins/sqlite',

    dataDirectory: './history',
    version: 0.1,

    dependencies: [{
      module: 'sqlite3',
      version: '3.1.4'
    }]
  },
  // Postgres adapter example config (please note: requires postgres >= 9.5):
  postgresql: {
    path: 'plugins/postgresql',
    version: 0.1,
    connectionString: 'postgres://user:pass@localhost:5432', // if default port
    dependencies: [{
      module: 'pg',
      version: '6.1.0'
    }]
  }
}

// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//                       CONFIGURING BACKTESTING
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

// Note that these settings are only used in backtesting mode, see here:
// @link: https://github.com/askmike/gekko/blob/stable/docs/Backtesting.md

config.backtest = {
  adapter: 'sqlite',
  daterange: 'scan',
  batchSize: 50
}

// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//                       CONFIGURING IMPORTING
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

config.importer = {
  daterange: {
    // NOTE: these dates are in UTC
    from: "2015-09-09 12:00:00"
  }
}

// set this to true if you understand that Gekko will
// invest according to how you configured the indicators.
// None of the advice in the output is Gekko telling you
// to take a certain position. Instead it is the result
// of running the indicators you configured automatically.
//
// In other words: Gekko automates your trading strategies,
// it doesn't advice on itself, only set to true if you truly
// understand this.
//
// Not sure? Read this first: https://github.com/askmike/gekko/issues/201
config['I understand that Gekko only automates MY OWN trading strategies'] = false;

module.exports = config;