Schalten von LIDL Zwischenstecker mit Conbee2 nicht möglich

[tuxmatic]

Hallo,
ich habe folgende Konfiguration:
Raspberry Pi 4, 4GB
Homematic IP RF module via USB
Conbee 2 USB-Stick mit Verlängerung und Firmware deCONZ_ConBeeII_0x266b0700.bin.GCF
Raspberrymatic Version 3.57.5.20210424
Cux Daemon 2.6
RedMatic Version 7.1.3 (mit Version 7.2.1 konnte der Conbee 2 nicht verbunden werden)
Eintrag im Cux Daemon Setup :
TTYASSIGN=ttyACM0:NC

Mit folgendem Flow konnte ich zwar meinen LIDL Zwischenstecker SAPZ 1 A1 (Modell Nr. HG06337) verbinden aber leider nicht schalten:

[ { "id": "c40958b1.93c65", "type": "tab", "label": "ZigBee", "disabled": false, "info": "" }, { "id": "f8ac78ad.ec4838", "type": "zigbee-controller", "z": "c40958b1.93c65", "shepherd": "38ff4db1.517a62", "name": "controller", "x": 310, "y": 80, "wires": [ [] ] }, { "id": "a8a8743.fcfff88", "type": "ccu-value", "z": "c40958b1.93c65", "name": "", "iface": "CUxD", "channel": "CUX2801001:1 Zwischenstecker:1", "datapoint": "STATE", "mode": "", "start": true, "change": true, "cache": false, "queue": false, "on": 0, "onType": "undefined", "ramp": 0, "rampType": "undefined", "working": false, "ccuConfig": "38263145.35ea0e", "topic": "${CCU}/${Interface}/${channel}/${datapoint}", "x": 150, "y": 180, "wires": [ [ "8e41504d.43cf8", "11347750.13fec9" ] ] }, { "id": "c2450523.da49e8", "type": "debug", "z": "c40958b1.93c65", "name": "", "active": true, "tosidebar": true, "console": false, "tostatus": false, "complete": "true", "targetType": "full", "statusVal": "", "statusType": "auto", "x": 810, "y": 180, "wires": [] }, { "id": "61c2d95c.cda038", "type": "zigbee-converter", "z": "c40958b1.93c65", "shepherd": "38ff4db1.517a62", "name": "Lidl-Stecker", "topic": "zigbee/${name}", "settopic": "zigbee/${name}/set", "gettopic": "zigbee/${name}/get", "device": "0xec1bbdfffea3774a", "attribute": "", "payload": "json", "x": 590, "y": 180, "wires": [ [ "c2450523.da49e8" ] ] }, { "id": "8e41504d.43cf8", "type": "change", "z": "c40958b1.93c65", "name": "", "rules": [ { "t": "set", "p": "topic", "pt": "msg", "to": "zigbee/${name}/set", "tot": "str" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 360, "y": 180, "wires": [ [ "7dda1ca5.115d04", "61c2d95c.cda038" ] ] }, { "id": "7dda1ca5.115d04", "type": "debug", "z": "c40958b1.93c65", "name": "", "active": true, "tosidebar": true, "console": false, "tostatus": false, "complete": "true", "targetType": "full", "statusVal": "", "statusType": "auto", "x": 580, "y": 340, "wires": [] }, { "id": "11347750.13fec9", "type": "debug", "z": "c40958b1.93c65", "name": "", "active": true, "tosidebar": true, "console": false, "tostatus": false, "complete": "true", "targetType": "full", "statusVal": "", "statusType": "auto", "x": 300, "y": 340, "wires": [] }, { "id": "38ff4db1.517a62", "type": "zigbee-shepherd", "name": "zigbee herdsman", "path": "/dev/ttyACM0", "baudRate": "115200", "rtscts": true, "channelList": [ 11 ], "led": "disabled", "adapter": "deconz" }, { "id": "38263145.35ea0e", "type": "ccu-connection", "name": "localhost", "host": "localhost", "regaEnabled": true, "bcrfEnabled": true, "iprfEnabled": true, "virtEnabled": true, "bcwiEnabled": false, "cuxdEnabled": true, "regaPoll": true, "regaInterval": "30", "rpcPingTimeout": "60", "rpcInitAddress": "127.0.0.1", "rpcServerHost": "127.0.0.1", "rpcBinPort": "2047", "rpcXmlPort": "2048", "queueTimeout": "5000", "queuePause": "250", "contextStore": "" } ]

Ich erhalte folgende Fehlermeldung vom zigbee-converter node:
Error: 0xec1bbdfffea3774a LidlPlug Command 0xec1bbdfffea3774a/11 genOnOff.off({}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null}) failed (no response received)

Mit der Phoscon App lässt sich die Dose schalten.

Mache ich da was bei der Konfiguration falsch oder gibt es da ein Problem in Redmatic oder dem Modul node-red-contrib-zigbee? Link zum Redmatic Issue