Accessing the PCSCF on public #353
Replies: 4 comments 7 replies
-
It should be ims.mnc070.mcc999.3gppnetwork.org
You could give it as pcscf.ims.mnc070.mcc999.3gppnetwork.org
e.g. if you IMSI is 999709876543201 then, IMPI should be [email protected]
yep, its correct For your reference, when I program a SIM card from Sysmocom I use the below command |
Beta Was this translation helpful? Give feedback.
-
|
but how can i give them the pcscf? i can only provide an ip address another thing, i think i do not need to reprogram the sim card since i am not using it, i am only configuring the imsi, k, opc in simlessly and scanning the esim qr code |
Beta Was this translation helpful? Give feedback.
-
|
You need to sslect FQDN for pcscf |
Beta Was this translation helpful? Give feedback.
-
|
If you can provide only ip address then you can leave 172.22.0.21 as the address |
Beta Was this translation helpful? Give feedback.
-
|
Hi @herlesupreeth, Thanks for your guidance so far. I'm following the sa-vonr-deploy.sh script and your instructions from the Iphone setup post. I've configured IMS in Simlessly as shown below: Configuration of the ims in Simlessly the eSIM is successfully generated, but it is not connecting, and SA mode is greyed out (similar to when 124 isn’t activated in SIM programming), the only configuration i configure to simlessly are the following, ICCID, K, OPC, IMSI, IMPI, and IMPU.
Notes:
This is the log: Thanks ! |
Beta Was this translation helpful? Give feedback.
-
Did you program the EF.SUCI_Calc_Info in Simlessly eSIM?? Since you are using PLMN 999 70, its a private network PLMN so iPhone requires the SIM to have that field programmed. And, dont forget to disable UST 125 and 126
You dont have to worry about this since in 999 70 PLMN (on in general private network PLMNs) IMS is completely disabled by Apple |
Beta Was this translation helpful? Give feedback.
-
Do you mean this field? from where can i get it? and yes, i am disabling these services |
Beta Was this translation helpful? Give feedback.
-
|
Yes, it that one. If you are using docker_open5gs then you can use this |
Beta Was this translation helpful? Give feedback.
-
|
you can find all the details in this Sysmocom programming script - https://github.com/herlesupreeth/docker_open5gs/blob/master/sim/iphone-private-5g.script |
Beta Was this translation helpful? Give feedback.
-
|
ok i found it, let me try and see |
Beta Was this translation helpful? Give feedback.
-
|
Finally, it worked, Thank youu!! |
Beta Was this translation helpful? Give feedback.
-
hi everyone, i am asking about using Third party remote sim provisioning, so i went with "simlessly", and i successfuly connected to the network with e-sim. but with IOS, i need the ims registration, so in their guide they required me to enter the following:
Under the ims secition:
Home Network Domain ( should it be mnc070.mcc999.3gppnetwork.org)
PCSCF address ( and since we are running it in local docker i think i can't just provide the ip in the .enf file)
IMPI (should use imsi here)
IMPU ( is this one correct "sip:[email protected]"
can you help please @herlesupreeth
Beta Was this translation helpful? Give feedback.
All reactions