Is it possible to control LED strips (Mi-light)

[andreypopov]

Here is the device:
http://www.aliexpress.com/snapshot/7650559185.html?orderId=75123623302888

Nothing works..

root@raspberrypi:/var/www/html/RPi/openmilight/Raspberry/librf24-bcm/openmilight# ./openmilight
================ SPI Configuration ================
CSN Pin = CE0 (PI Hardware Driven)
CE Pin = Custom GPIO25
Clock Speed = 1 Mhz
================ NRF Configuration ================
STATUS = 0x0e RX_DR=0 TX_DS=0 MAX_RT=0 RX_P_NO=7 TX_FULL=0
RX_ADDR_P0-1 = 0x55555e28d1 0x55555e28d1
RX_ADDR_P2-5 = 0x33 0xce 0x3e 0xe3
TX_ADDR = 0x55555e28d1
RX_PW_P0-6 = 0x0c 0x0c 0x20 0x20 0x20 0x20
EN_AA = 0x00
EN_RXADDR = 0x3e
RF_CH = 0x0b
RF_SETUP = 0x07
CONFIG = 0x17
DYNPD/FEATURE = 0x00 0x00
Data Rate = 1MBPS
Model = nRF24L01+
CRC Length = Disabled
PA Power = PA_MAX
in listening mode

No reponse anymore