chapter 6.1 inaccurate

[phjr]

I tried following the course, but after installation of the Xilinx ISE it was not clear at all which shortcut I should start in the start menu. Only after some struggling (as well as downloading and installing an older version of the ISE) I found that I have to start "ISE Design Tools\64-Bit Project Navigator" to get to the software used in the guide. There seems to be a step missing in the instructions, that explains just this.

[phjr]

OK, now I found the correct icon on the desktop. I missed that previously.

[hamsternz]

Hi Phjr,

I've made myself a note to add that to the next revision. Thanks for the
tip!

Cheers

Mike

On 5/11/2012 11:36 p.m., phjr wrote:

I tried following the course, but after installation of the Xilinx ISE
it was not clear at all which shortcut I should start in the start
menu. Only after some struggling (as well as downloading and
installing an older version of the ISE) I found that I have to start
"ISE Design Tools\64-Bit Project Navigator" to get to the software
used in the guide. There seems to be a step missing in the
instructions, that explains just this.

—
Reply to this email directly or view it on GitHub
#5.

[hamsternz]

Hi - I've finally got around to adding this - sorry for the delay!

Thanks once again.

Mike

On 5/11/2012 11:36 p.m., phjr wrote:

I tried following the course, but after installation of the Xilinx ISE
it was not clear at all which shortcut I should start in the start
menu. Only after some struggling (as well as downloading and
installing an older version of the ISE) I found that I have to start
"ISE Design Tools\64-Bit Project Navigator" to get to the software
used in the guide. There seems to be a step missing in the
instructions, that explains just this.

—
Reply to this email directly or view it on GitHub
#5.