Web sign

• Configuration: https://config.webconverger.com/client/[email protected]
• Contact: [email protected]

Issues

Rpi+Arduino Door controller + Camera should be cleared up

http://up.dabase.com/2015-05-22/image.webp

I think I might have disconnected a wire whilst cleaning the dust up there from the bread board. Maybe Mike can help?

Webconverger Rpi2 should be neatened up and secured

Cables could be tied and double sided tape to better secure the screen

Screen needs to be cleaned

Hopefully people won't think it's a touch screen

BUG: instantupdate API seems flaky

Need debug this, hence configuration is in debug mode on IP 192.168.6.217.

Password to configuration panel

Please ask [email protected]

Web page could be improved for the sign

Please help out if you can. The Web page needs to be scripted to update itself ideally.

Webconverger can be triggered to reload the page with instantupdate, but there is a bug with that.

Idea: Attach camera

Could some please donate a Raspberry PI camera?

Idea: Attach PIR sensor to automatically turn off the screen

hendry: on it! ETA end of May

String cable to make it wired to the Internet

Currently it's using a USB wireless dongle, which can be unreliable. Wired is best. Project would be run cable back from the front and establish a hub on the top of the lockers.