TIM HUB DGA4132 missing IP address #309
Replies: 3 comments
-
|
reset again. |
Beta Was this translation helpful? Give feedback.
-
Already done several times, nothing changes, the IP address does not appear |
Beta Was this translation helpful? Give feedback.
-
|
Hello @SmooKeeIce, Have you considered assigning a static IP address to the interface? Are you able to receive any traffic? Can you observe any data when utilizing tcpdump for network packet analysis? What is ifconfig -a show? Do you have interface up and running? There is really much things that is unknown here so it's hard to answer this question. I assume you have shell access? |
Beta Was this translation helpful? Give feedback.
-
Hi all guys, I've encountered a problem with my old TIM modem router.
I was going to install Ansuel GUI in order to turn it into a Wi-Fi repeater (I already have a main router for my home network), so I followed all the steps until I downgraded the firmware to version 1.0.3, once installed the modem completely lost its IP address, I also tried scanning the addresses from the command prompt but the default gateway comes up empty whether I connect via LAN or Wi-Fi.
I have also tried doing a hard reset but the situation remains the same.
The modem seems to be working properly (the "WI-Fi 5" and "Wi-Fi 2.5" lights up green and "INFOLED" lights up red) but I can no longer access it because the IP has disappeared.
I don't know what to do anymore I hope you can help me
Beta Was this translation helpful? Give feedback.
All reactions