SbsaQemu.fdf

#
#  Copyright (c) 2019, Linaro Limited. All rights reserved.
#
#  SPDX-License-Identifier: BSD-2-Clause-Patent
#

################################################################################
#
# FD Section for FLASH0
#
# The [FD] Section is made up of the definition statements and a
# description of what goes into  the Flash Device Image.  Each FD section
# defines one flash "device" image.  A flash device image may be one of
# the following: Removable media bootable image (like a boot floppy
# image,) an Option ROM image (that would be "flashed" into an add-in
# card,) a System "Flash"  image (that would be burned into a system's
# flash) or an Update ("Capsule") image that will be used to update and
# existing system flash.
#
################################################################################

[FD.SBSA_FLASH0]
BaseAddress   = 0x00000000
Size          = 0x00200000
ErasePolarity = 1
BlockSize     = 0x00001000
NumBlocks     = 0x200

################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################
## Place for Trusted Firmware
# flash0 is secure so we put here the BL1
0x00000000|0x00008000
FILE = Platform/Qemu/Sbsa/bl1.bin

# and FIP (BL2 + BL31)
0x00008000|0x00020000
FILE = Platform/Qemu/Sbsa/fip.bin

################################################################################
#
# FD Section for FLASH1
#
################################################################################

[FD.SBSA_FLASH1]
BaseAddress   = 0x10000000|gArmTokenSpaceGuid.PcdFdBaseAddress
Size          = 0x002C0000|gArmTokenSpaceGuid.PcdFdSize
ErasePolarity = 1
BlockSize     = 0x00001000
NumBlocks     = 0x2C0

## Place for EFI (BL33)
# This offset (if any as it is 0x0 currently) + BaseAddress (0x10000000) must be set in PRELOADED_BL33_BASE at ATF
0x00000000|0x00200000
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
FV = FVMAIN_COMPACT

## Place for Variables. They share flash1 with EFI
# Must be aligned to Flash Block size 0x40000
0x00200000|0x00040000
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
#NV_VARIABLE_STORE
DATA = {
  ## This is the EFI_FIRMWARE_VOLUME_HEADER
  # ZeroVector []
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  # FileSystemGuid: gEfiSystemNvDataFvGuid         =
  #   { 0xFFF12B8D, 0x7696, 0x4C8B,
  #     { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
  0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C,
  0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50,
  # FvLength: 0xC0000
  0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x00, 0x00,
  # Signature "_FVH"       # Attributes
  0x5f, 0x46, 0x56, 0x48, 0xff, 0xfe, 0x04, 0x00,
  # HeaderLength # CheckSum # ExtHeaderOffset #Reserved #Revision
  0x48, 0x00, 0x28, 0x09, 0x00, 0x00, 0x00, 0x02,
  # Blockmap[0]: 0x3 Blocks * 0x40000 Bytes / Block
  0x3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00,
  # Blockmap[1]: End
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  ## This is the VARIABLE_STORE_HEADER
  # It is compatible with SECURE_BOOT_ENABLE == FALSE as well.
  # Signature: gEfiAuthenticatedVariableGuid =
  #   { 0xaaf32c78, 0x947b, 0x439a,
  #     { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 }}
  0x78, 0x2c, 0xf3, 0xaa, 0x7b, 0x94, 0x9a, 0x43,
  0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92,
  # Size: 0x40000 (gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize) -
  #         0x48 (size of EFI_FIRMWARE_VOLUME_HEADER) = 0x3ffb8
  # This can speed up the Variable Dispatch a bit.
  0xB8, 0xFF, 0x03, 0x00,
  # FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32
  0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
}

0x00240000|0x00040000
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
#NV_FTW_WORKING
DATA = {
  # EFI_FAULT_TOLERANT_WORKING_BLOCK_HEADER->Signature = gEdkiiWorkingBlockSignatureGuid         =
  #  { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65,  0x0, 0xfd, 0x9f, 0x1b, 0x95 }}
  0x2b, 0x29, 0x58, 0x9e, 0x68, 0x7c, 0x7d, 0x49,
  0xa0, 0xce, 0x65,  0x0, 0xfd, 0x9f, 0x1b, 0x95,
  # Crc:UINT32            #WorkingBlockValid:1, WorkingBlockInvalid:1, Reserved
  0x5b, 0xe7, 0xc6, 0x86, 0xFE, 0xFF, 0xFF, 0xFF,
  # WriteQueueSize: UINT64
  0xE0, 0xFF, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00
}

0x00280000|0x00040000
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
#NV_FTW_SPARE

################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file.  This section also defines order the components and modules are positioned
# within the image.  The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################

[FV.FvMain]
FvNameGuid         = 706c8e7f-306e-4dbc-a4ca-c8615d0d1b96
BlockSize          = 0x40
NumBlocks          = 0         # This FV gets compressed so make it just big enough
FvAlignment        = 16        # FV alignment and FV attributes setting.
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

  INF MdeModulePkg/Core/Dxe/DxeMain.inf
  INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf

  #
  # PI DXE Drivers producing Architectural Protocols (EFI Services)
  #
  INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
  INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
  INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
  INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
  INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
  INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
  INF SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf
  INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
  INF MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
  INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
  INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
  INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf

  #
  # Multiple Console IO support
  #
  INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
  INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
  INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
  INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
  INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf

  INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
  INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
  INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
  INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf

  #
  # FAT filesystem + GPT/MBR partitioning + UDF filesystem
  #
  INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
  INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
  INF FatPkg/EnhancedFatDxe/Fat.inf
  INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
  INF MdeModulePkg/Universal/Disk/UdfDxe/UdfDxe.inf

  #
  # UEFI application (Shell Embedded Boot Loader)
  #
  INF ShellPkg/Application/Shell/Shell.inf

  #
  # Bds
  #
  INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
  INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
  INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
  INF MdeModulePkg/Universal/DriverHealthManagerDxe/DriverHealthManagerDxe.inf
  INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
  INF MdeModulePkg/Application/UiApp/UiApp.inf

  #
  # Networking stack
  #
!include NetworkPkg/Network.fdf.inc

  #
  # SCSI Bus and Disk Driver
  #
  INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
  INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf

  #
  # ACPI support
  #
  INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
  INF MdeModulePkg/Universal/Acpi/AcpiPlatformDxe/AcpiPlatformDxe.inf
  INF Silicon/Qemu/SbsaQemu/Drivers/SbsaQemuAcpiDxe/SbsaQemuAcpiDxe.inf
  INF RuleOverride = ACPITABLE Silicon/Qemu/SbsaQemu/AcpiTables/AcpiTables.inf
  INF MdeModulePkg/Universal/Acpi/BootGraphicsResourceTableDxe/BootGraphicsResourceTableDxe.inf

  #
  # SMBIOS support
  #
  INF ArmPkg/Universal/Smbios/ProcessorSubClassDxe/ProcessorSubClassDxe.inf
  INF ArmPkg/Universal/Smbios/SmbiosMiscDxe/SmbiosMiscDxe.inf
  INF MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf

  #
  # PCI support
  #
  INF ArmPkg/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf
  INF MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf
  INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf

  #
  # USB Support
  #
  INF MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.inf
  INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
  INF MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.inf
  INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
  INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf
  INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf

  #
  # TianoCore logo (splash screen)
  #
  INF MdeModulePkg/Logo/LogoDxe.inf

  #
  # Ramdisk support
  #
  INF MdeModulePkg/Universal/Disk/RamDiskDxe/RamDiskDxe.inf

[FV.FVMAIN_COMPACT]
FvAlignment        = 16
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

  INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
  INF MdeModulePkg/Core/Pei/PeiMain.inf
  INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
  INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
  INF ArmPkg/Drivers/CpuPei/CpuPei.inf
  INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
  INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf

  # IDE/AHCI Support
  INF OvmfPkg/SataControllerDxe/SataControllerDxe.inf
  INF MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf
  INF MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxe.inf
  INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
  INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf

  # NonDiscoverableDevices
  INF Silicon/Qemu/SbsaQemu/Drivers/SbsaQemuPlatformDxe/SbsaQemuPlatformDxe.inf
  INF MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciDeviceDxe.inf

  #VGA
  INF OvmfPkg/QemuVideoDxe/QemuVideoDxe.inf

  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
      SECTION FV_IMAGE = FVMAIN
    }
  }

!include ArmVirtPkg/ArmVirtRules.fdf.inc