Skip to content

Latest commit

 

History

History
107 lines (66 loc) · 3.62 KB

README.md

File metadata and controls

107 lines (66 loc) · 3.62 KB
Raw

My 2017 Resolutions

Here's what I resolve to do in 2017. We all say we're going to try to do something but we're never sure just how important something can really be until the time comes, otherwise we just forget about it. Things change throughout the year, too. Rather than just say what I would like to do, I'm going to do the nerd thing and track it! I'm going to use GitHub issues and pull requests to mark items on the list as done or "NTBF" (Not To Be Fixed). In no particular order, here's what I am going to try to do.

  • Don't die.

    This sounds rather heavy but I've had some rather scary health issues to
get sorted which are ongoing. This is obviously Priority 1, seeing as it
blocks everything below. ;-)

  • Implement a custom console system and RISC-like CPU on FPGA.

  • Finish my OPL-like hard FM synthesizer chip and make an album with it.

    I'll be porting this over to SystemVerilog and trying out a Xilinx Zynq
APoC to see how well the ARM-FPGA interface works.

  • Obtain some mastery in SystemVerilog.

    I only know Verilog 2001 and am always running into some frustrating
limitations that are relieved in SystemVerilog.

  • Make progress on the Synth Spaceship.

    I'm going to fill my studio with modulars until there are concerns for the
load-bearing capacity of the floor. Please don't tell my landlord.

  • Release four electronic music albums.

    At least one must be >= 60 minutes.

  • Design and build a modular analog synthesizer from scratch.

    I've always wanted to do this and, now that I've got an CV-exponential
control circuit, I can start building the classic oscillators.

  • Immutable ASTs, structured editing, formatting, a foundation for macros.

    This one isn't entirely up to me, so we'll see.

  • Mystery Item #1.

  • Mystery Item #2.

  • Mystery Item #3.

  • Mystery Item #4.

  • Play a live chiptune set.

    I've finally got close to enough material for this; just need to find the right time and place.

  • Do some pickling.

    One word: pickles! Pickle, pickle, pickle. Say it until it loses its
meaning: pickle!

  • Pierce something.

    Why the hell not?

  • Get certified on an injection molder.

    I've struggled to find the right project for this because mold volumes are
limited but what would be perfect is a keyboard controller! Piano keys are
repeated, small parts, so it should be a straightforward set of molds to
create and be applicable to packaging up the FM synth.

  • Grow something difficult indoors.

    Like mushrooms, or something cute for the kitchen. Spent enough money on a
Botany degree, might as well use it for something ...

  • Be more methodical about practicing:

    - Drawing

  I used to draw quite a bit in design school and now it seems like ages
  ago (because it was). Specifically, figure and anatomical drawings from
  memory is what I want to focus on this year.

- Piano
  
  I really want to specifically hone my improvisation skills. Continuing
  composing and recording is really good but not very principled, so I
  want to take a little bit of time to do some smaller, more focused
  exercises, and practice someone else's music.

  • Volunteer some time for a cause I care about.

    I haven't decided what this will be yet but I think it's important for a
balanced and useful life.

  • Experience a real American desert landscape.

  • Read 3 fiction books.

    This is rather modest compared to some but, hey, this list is getting
long! :-P