Fixed drivers for Wacom Bamboo, Graphire, Intuos 1, 2, 3, and Cintiq 1st gen tablets on macOS Catalina / Big Sur / Monterey
Wacom's macOS drivers for Bamboo, Graphire, Intuos 1, 2 & 3 and Cintiq 1st gen tablets have bugs in them that cause them to completely fail to start on macOS 10.15 Catalina and later versions (including 11 Big Sur and 12 Monterey). This doesn't apply to the Windows driver, or to the drivers for their newer tablets.
When you try to open the Wacom preference pane with a Bamboo tablet, you'll get an error message saying "Waiting for synchronization", then finally "There is a problem with your tablet driver. Please reboot your system. If the problem persists reinstall or update the driver". For an Intuos 3 or Cintiq 1st gen tablet, the preference pane will open, but clicking anything will cause it to crash with the message "There was an error in Wacom Tablet preferences." For Graphire and Intuos 1 & 2 tablets, the driver's installer couldn't even run on Catalina.
Thankfully I was able to track down the issues and I have patched the drivers to fix them!
My fixed Bamboo driver (v5.3.7-6) supports these tablets:
- CTE-450, CTE-650 - Bamboo Fun / Bamboo Art Master (2007)
- CTE-460, CTE-660 - Bamboo One Pen
- CTF-430 - Bamboo One
- CTH-300, CTH300, CTH301K - Bamboo Pad
- CTH-460, CTH-660 - Bamboo Pen and Touch
- CTH-461 - Bamboo Fun Pen and Touch / Bamboo Craft / Bamboo Fun Special Edition
- CTH-470 - Bamboo Capture / Bamboo Pen & Touch / Bamboo Create
- CTH-661 - Bamboo Fun / Bamboo Art Master (2009) / Bamboo Fun Pen and Touch
- CTH-670 - Bamboo Create
- CTL-460, CTL-660 - Bamboo Pen
- CTL-470 - Bamboo Connect / Bamboo Pen
- CTT-460 - Bamboo Touch
- MTE-450 - Bamboo
My fixed Graphire 1 & 2 and Intuos 1 & 2 driver (v6.1.6-4) supports these tablets:
- ET-0405-U - Graphire / Graphire 1 (USB)
- ET-0405-R - Graphire / Graphire 1 (Serial) - Untested, let me know if it works!
- ET-0405A - Graphire 2
- GD-0405-U, GD-0608-U, GD-0912-U, GD-1212-U, GD-1218-U - Intuos (USB) (1998)
- GD-0405-R, GD-0608-R, GD-0912-R, GD-1212-R, GD-1218-R - Intuos (Serial) (1998) - Untested
- XD-0405-U, XD-0608-U, XD-0912-U, XD-1212-U, XD-1218-U - Intuos 2 (USB)
- XD-0405-R, XD-0608-R, XD-0912-R, XD-1212-R, XD-1218-R - Intuos 2 (Serial) - Untested
My fixed Graphire 3 driver (v5.2.6-5) supports these tablets:
- CTE-430, CTE-630 - Graphire 3
- CTE-630BT - Graphire 3 Wireless
My fixed Graphire 4 driver (v5.3.0-3) supports these tablets:
- CTE-440, CTE-640 - Graphire 4
And my fixed Intuos 3 and Cintiq driver (v6.3.15-3) supports these tablets:
- PTZ-430, PTZ-630, PTZ-630SE, PTZ-631W, PTZ-930, PTZ-1230, PTZ-1231W - Intuos 3
- DTZ-2100 - Cintiq 21UX 1st Gen.
- DTZ-2000 - Cintiq 20WSX
For Intuos 4 my fix is not needed. You can use Wacom's official driver v6.3.41-2 instead.
🇦🇺 Simplified English instructions
🇧🇷 / 🇵🇹 Instruções em português
🇯🇵 日本語で表示
🇷🇺 Инструкция на русском языке
🇪🇸 Instrucciones en español
🇵🇱 Instrukcja po polsku
🇫🇷 Instructions en français
Download the correct installer for your tablet here and double click it to run it, this will install my fixed version of Wacom's driver:
- Fixed driver v6.1.6-4 installer for Graphire 1 & 2 and Intuos 1 & 2 tablets
- Fixed driver v5.2.6-5 installer for Graphire 3 tablets
- Fixed driver v5.3.0-3 installer for Graphire 4 tablets
- Fixed driver v5.3.7-6 installer for Bamboo tablets
- Fixed driver v6.3.15-3 for Intuos 3 and Cintiq tablets
If you get an error message that your Mac only allows apps to be installed from the App Store, right-click on it and click "Open" instead.
After installing, follow the instructions in the next section to fix up the tablet's permissions.
Touch your pen tip to your tablet, and it should prompt you visit System Preferences > Security & Privacy > Privacy Tab to grant the tablet permissions.
On the Accessibility page, click the padlock to unlock the page, then find and tick any PenTabletDriver, WacomTabletDriver
TabletDriver or WacomTabletSpringboard entries you see in the list. Do the same on the Input Monitoring page.
If your tablet supports touch, touch the tablet with your finger, it should again prompt you to grant permissions.
On the Accessibility page, tick the ConsumerTouchDriver or WacomTouchDriver entry.
With some tablets, the driver might only appear on the Input Monitoring page, and you may need to reboot a second time for it to appear on the Accessibility page too.
You likely had permissions left over from the previous tablet driver, and these stale entries all need to be removed like so:
On the "Accessibility" page of Security & Privacy, Find anything related to Wacom in the list (e.g. PenTabletDriver,
WacomTabletDriver, TabletDriver, ConsumerTouchDriver, WacomTabletSpringboard, WacomTouchDriver), select them,
and click the minus button to remove them. Go to the "Input Monitoring page" and do the same there.
Now either reboot your computer, or run these two commands in the Terminal, to reload the tablet driver. For Bamboo and Graphire 3 & 4 tablets:
launchctl unload /Library/LaunchAgents/com.wacom.pentablet.plist
launchctl load -w /Library/LaunchAgents/com.wacom.pentablet.plist
For Graphire 1 & 2, Intuos, and Cintiq tablets:
launchctl unload /Library/LaunchAgents/com.wacom.wacomtablet.plist
launchctl load -w /Library/LaunchAgents/com.wacom.wacomtablet.plist
This should restore the prompts to ask you to add permissions, so now begin the instructions in this section again.
For a handful of people, the Wacom driver never appears in the Input Monitoring list for them. To fix this, first open up the "Terminal" app and paste this line in and press enter to ensure that the Wacom service is enabled:
For Bamboo and Graphire 3 & 4 tablets:
launchctl load -w /Library/LaunchAgents/com.wacom.pentablet.plist
For Graphire 1 & 2, Intuos, and Cintiq tablets:
launchctl load -w /Library/LaunchAgents/com.wacom.wacomtablet.plist
If that doesn't trigger it to ask you to add Input Monitoring permissions when you try to use the tablet, you can add it manually instead.
In Finder, click Go -> Go to Folder, and paste this path in there and click OK:
/Library/Application Support/Tablet/
In there you should see a "PenTabletDriver" file (Bamboo), "PenTabletSpringboard" (Graphire 3 & 4), or "WacomTabletSpringboard" (Graphire 1 & 2, Intuos, Cintiq).
Unlock the Input Monitoring page, then drag the PenTabletDriver / PenTabletSpringboard / WacomTabletSpringboard file onto it to add it to the list, and make sure it's ticked. Now reboot your computer, and when you try to use the tablet it should prompt you to tick it in the Accessibility page too, after which it should start working.
Make sure you don't still have Wacom's very latest driver installed. Use "Wacom Utility"/ "Tablet Utility" to fully uninstall all of Wacom's drivers (rather than just dragging them to the trash), then install my driver again.
Corrupt preferences can prevent things from working, especially if you installed a bunch of different driver versions while trying to get things to work. Use Wacom Utility to reset your preferences, reboot, and try using the tablet again.
If you enjoyed having your tablet back in action, please consider sending me a tip!
This will help fund me and further development of these fixed drivers.
PenTabletDriver launches two sub-drivers to do the work for it, ConsumerTouchDriver and TabletDriver. To find those drivers within its Resources folder it eventually calls this function to extract a path from a URL:
CFString * MacPaths::PathFromURL(CFURL *url)
{
CFString *path;
path = _objc_retainAutoreleasedReturnValue(url->path());
_objc_release(path); /* Whoops, path is destroyed here! */
return path; /* Now returning a free'd path */
}Forgive me for paraphrasing the original Objective C code as C++, I don't speak objc!
When CFURL creates the path, its reference count starts out at 1. It queues the reference count to be decremented later
by calling autorelease() on it, then returns it to Wacom's driver. This call to autorelease pairs up with Wacom's
retainAutoreleasedReturnValue() call, and so and leaves the path's reference count untouched, at 1.
But now the Wacom driver calls _objc_release() on the path. This decrements its reference count to 0, and
the path is immediately freed!
This freed path is used while launching the sub-driver, which can trigger a segfault in ProcessUtils::LaunchApplicationWithBundleID().
This kills the driver.
The fix is a single-byte change which replaces the call to _objc_release() in PathFromURL to a call to _objc_retain().
This prevents the path from being freed before it is used, which cures the segfault.
The ConsumerTouchDriver also contains this same bug, and the patch is the same there.
Both the pen driver and the touch driver need fixes to stop them from crashing when a multi-touch gesture is performed, or the scroll ring is used to zoom.
When a gesture is performed, the function CMacHIDGestureEventOSX1010::PostGesture is responsible for sending that gesture
to the operating system:
void CMacHIDGestureEventOSX1010::PostGesture(EIOHIDEventType gestureType_I, int32_t eventDirAmount)
{
__CFDataOSX1010 *eventStructure;
if (gestureType_I == 61 /* kCGHIDEventTypeGestureStarted */) {
this->eventPhase = 1 /* kCGSGesturePhaseBegan */;
} else {
this->eventPhase = 4 /* kCGSGesturePhaseEnded */;
(**(code **)(*(long *)this + 0x18))(0,this,(uint32_t) eventDirAmount);
}
eventStructure = (__CFDataOSX1010 *) _CGEventCreate(0); // Dubious
_CGEventSetType(eventStructure, 29 /* kCGSEventGesture */);
eventStructure->eventSubType = gestureType_I; // Relies on the exact memory layout of CGEvent (!)
eventStructure->eventDirAmount = eventDirAmount; // Ditto
_CGEventPost(0, eventStructure);
_CFRelease(eventStructure);
}Notice how the result from CGEventCreate is being cast to a structure? CGEvent is supposed to be an opaque type, programs
aren't supposed to know or rely on its layout, since its structure changes from OS version to OS version, but here it is
being cast to a structure so that its eventSubType and eventDirAmount fields can be assigned directly. These two
writes cause heap corruption on Catalina and trigger a crash, because the layout of CGEvent has changed since Sierra!
The proper way to store values into an event is by using the CGEventSetIntegerValueField API, which allows you to refer to fields of CGEvent by a logical ID instead of their position in memory. So what are the equivalent field IDs for the two writes that the Wacom driver needs to make?
I disassembled macOS Sierra's SkyLight framework, which contains the implementation for CGEventSetIntegerValueField, to
see what the IDs should have been for those fields. It appears that the eventSubType can be written by field ID 110,
and the eventDirAmount can be written by ID 115. But these field IDs are nowhere to be found in Apple's documentation,
which explains why Wacom couldn't use them!
I did some Googling and discovered that these fields are undocumented because they're part of Apple's private API. This WebKit header reveals their names:
kCGEventGestureHIDType = 110
kCGEventGestureSwipeValue = 115
kCGEventGesturePhase = 132
And those private API fields are stable from Sierra all the way to Big Sur! Now that we know this, the two assignments to eventStructure can be replaced by these calls, and the driver crashes are eliminated:
_CGEventSetIntegerValueField(eventStructure, 110 /* kCGEventGestureHIDType */, gestureType_I);
_CGEventSetIntegerValueField(eventStructure, 115 /* kCGEventGestureSwipeValue */, eventDirAmount);The floating-point version of PostGesture has the same issue:
void CMacHIDGestureEventOSX1010::PostGesture(EIOHIDEventType eventSubType, float dirAmount)
{
__CFDataOSX1010 *eventStructure;
eventStructure = (__CFDataOSX1010 *)_CGEventCreate(0);
_CGEventSetType(eventStructure, 29 /* kCGSEventGesture */);
eventStructure->eventSubType = eventSubType; // !
eventStructure->eventDirAmount = reinterpret_cast<int32_t&>(dirAmount); // !
eventStructure->eventState = this->eventPhase; // !
if (this->eventPhase == 1 /* kCGSGesturePhaseBegan */) {
this->eventPhase = 2 /* kCGSGesturePhaseChanged */;
}
_CGEventSetLocation(eventStructure, GetMouseLocationInScreenCoordinates());
_CGEventPost(0, eventStructure);
_CFRelease(eventStructure);
}And we can patch it like so:
_CGEventSetIntegerValueField(eventStructure, 110 /* kCGEventGestureHIDType */, gestureType_I);
_CGEventSetIntegerValueField(eventStructure, 115 /* kCGEventGestureSwipeValue */, reinterpret_cast<int32_t&>(dirAmount));
_CGEventSetIntegerValueField(eventStructure, 132 /* kCGEventGesturePhase */, this->eventPhase);The Intuos 3 and Cintiq driver has a bug in its preference pane that causes it to crash as soon as an item is clicked on.
One of the main features of the preference pane's UI are the lists of icons representing the tablets, tools and applications you can configure. That icon list control uses a function like this to dispatch events (such as clicks) to its children:
void WTCCPLIconList::action:(ID event, SEL param_2, ID param_3) {
int selectedIndex;
ID target;
ID action;
target = _objc_retainAutoreleasedReturnValue(event->target());
action = event->action();
selectedIndex = event->selectedIndex();
event->scrollIndexToVisible(selectedIndex);
if ((target != 0) && (action != 0)) {
code* handler = target->methodForSelector(action);
Object *result = handler(target, action, event);
result = _objc_retainAutoreleasedReturnValue(result); // (!)
_objc_release(result); // (!)
}
event->updateButtonStates();
_objc_release(target);
}The problem with this code is that it requires the event's handler() function to return an object, which it then uselessly
retains() and releases(). But one of the handler functions that will be called is OEventDispatcher_Professional::listClickAction(),
and that function is a void function (with no well-defined return value)!
So action:() ends up calling retain() and release() on a garbage pointer, which causes a segfault.
The patch here is easy - that useless pair of retain() and release() calls is deleted. The same bug exists in
ONumberTextField::textDidChange:, with the same fix.
There's another problem with this driver. If, while trying to get your tablet to work, you accidentally install the latest Wacom driver (that doesn't support Intuos 3), it writes a newer-format preference file that the old Intuos 3 driver will crash when trying to read. And this situation doesn't resolve itself, the user has to manually use the Wacom Utility to delete the tablet preferences in order to fix it.
This is odd because the preference file includes a version number which is designed to avoid this very situation. The old driver uses version 5, and the latest driver uses version 6:
<ImportFileVersion type="integer">6</ImportFileVersion>And the driver code explicitly checks for this version number and should abort when it is too new:
CTabletDriver::ReadSettings(basic_string settingsFilename, ...)
{
basic_string settingsFileContent;
CSettingsMap settingsMap;
...
ReadFromXMLFile(settingsMap, settingsFilename, settingsFileContent);
SettingsMigration *migration = SettingsMigration::MigratePen(settingsMap);
if (migration != nullptr) {
int fileVersion = settingsMap.IntegerForKeyWithDefault("ImportFileVersion", -1)
if (fileVersion < 1) {
// Report error
} else if (fileVersion <= this->supportedVersion) {
// Accept the loaded settings
} else {
// Report error: Settings are too new
}
}
...
}But the driver never aborts, instead it crashes while attempting to load the preferences. So what's going wrong here?
The secret lies inside the MigratePen() function. This function is designed to upgrade older settings files to the
current version, but unfortunately in the process it unconditionally overwrites the ImportFileVersion with the
current version (5)! This leaves CTabletDriver::ReadSettings() unable to detect that the settings are too new to be
parsed.
To solve this I beefed up the invalid version detection code from MigratePen():
if (settingsVersion < 1) {
// Report invalid settings version and return NULL
} To make it:
if (settingsVersion < 1 || settingsVersion > 5) {
// Report invalid settings version and return NULL
} So now if the preferences are too new, MigratePen() won't attempt to upgrade them, and ReadSettings() will cleanly skip
loading the preferences. This causes the preferences to remain at their defaults, and if the user edits the settings using
the preference pane, the settings should be cleanly overwritten.
The installers for the Graphire drivers are an old format that Catalina no longer supports, so I had to completely rebuild them.
Graphire's preference pane incorrectly relied on private symbols from the macOS standard library that are no longer present in Catalina, so it could no longer start.
For example, Wacom's NSNibWakingOverride::awakeFromNib() function is called during GUI deserialization, and adds the loaded GUI control to a map so it can be accessed by its tag later:
void NSNibWakingOverride::awakeFromNib(NSControl *this) {
OMasterDictionaryPtr->addObject:withTag:(this, this->_tag));
}But this relies on reading NSControl._tag, which is a private field. In macOS 10.9 that worked because NSControl was defined like this:
@interface NSControl : NSView
{
/*All instance variables are private*/
NSInteger _tag;
id _cell;
struct __conFlags {
...
} _conFlags;
}But in macOS 10.10, NSControl was refactored to move the _tag field into a new _aux field, making it inaccessible:
@interface NSControl : NSView
{
/*All instance variables are private*/
NSControlAuxiliary *_aux;
id _cell;
struct __conFlags {
...
} _conFlags;
}
@property NSInteger tag;I patched awakeFromNib to make it properly call the public accessor function for this field:
void NSNibWakingOverride::awakeFromNib(NSControl *this) {
OMasterDictionaryPtr->addObject:withTag:(this, this->tag()));
}In Wacom's OPopupOutlineView::reloadData() function, the private NSTableView._dataSource field is incorrectly read directly:
void OPopupOutlineView::reloadData(OPopupOutlineView *this) {
this->_dataSource.willReloadDataForOutlineView(this);
...
}So I patched this to use the public accessor instead:
void OPopupOutlineView::reloadData(OPopupOutlineView *this) {
this->dataSource()->willReloadDataForOutlineView(this);
...
}These drivers have the same problems as the Graphire 3 & 4 drivers, plus the same _dataSource problem in their
ORadialSubMenuTableView::reloadData() method, with the same fix.