From aa47520e6e7a10d045a6e6da3e2ce557653b368d Mon Sep 17 00:00:00 2001 From: Ian Chen Date: Tue, 17 Sep 2024 00:03:08 +0000 Subject: [PATCH] use image tag Signed-off-by: Ian Chen --- tutorials/point_cloud_to_mesh.md | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/tutorials/point_cloud_to_mesh.md b/tutorials/point_cloud_to_mesh.md index f7f2d33097..04d710013c 100644 --- a/tutorials/point_cloud_to_mesh.md +++ b/tutorials/point_cloud_to_mesh.md @@ -21,7 +21,7 @@ After installing, open CloudCompare and import your point cloud file by going to Depending on the number of points in your point cloud, this could take several minutes. Once loaded, you should see the following tunnel section: -![Opening the point cloud](https://raw.githubusercontent.com/gazebosim/gz-sim/gz-sim9/tutorials/files/point_cloud_to_mesh/cloudcompare2.png) +\image html files/point_cloud_to_mesh/cloudcompare2.png Many 3D scans will be composed of millions, sometimes hundreds of millions of points. Converting a scan to a 3D model with that many points would be very difficult due to the number of polygons that would be created and the long processing time necessary to compute the normals. @@ -35,13 +35,13 @@ We'll still walk through reducing points, however, to make the process quicker. To reduce the number of points in your cloud, click on the tunnel so a yellow cube outline appears around it, then go to `Edit` > `Subsample`. -![Min. space between points](https://raw.githubusercontent.com/gazebosim/gz-sim/gz-sim9/tutorials/files/point_cloud_to_mesh/min_space.jpg) +\image html files/point_cloud_to_mesh/min_space.jpg The number you will need to enter in the `min. space between points` field will vary depending on your point cloud. A value of .01 was sufficient to bring our point cloud to an easy-to-manage 1 million points. Point count is visible in the `Properties` window on the lower left side of the screen. -![Point count of subsample](https://raw.githubusercontent.com/gazebosim/gz-sim/gz-sim9/tutorials/files/point_cloud_to_mesh/properties.png) +\image html files/point_cloud_to_mesh/properties.png How many points you reduce down to will largely depend on how long you are willing to wait for the point cloud to be converted into a mesh. The more points you start with, the longer it will take to compute the normals and create the mesh. @@ -49,7 +49,7 @@ The more points you start with, the longer it will take to compute the normals a After the operation is complete you’ll have two clouds in your scene: the original point cloud and your subsampled point cloud. Most operations in CloudCompare will create new point clouds and keep the original, so make sure that you have the new point cloud selected before running an operation. -![Selecting the new point cloud](https://raw.githubusercontent.com/gazebosim/gz-sim/gz-sim9/tutorials/files/point_cloud_to_mesh/secondcloud.png) +\image html files/point_cloud_to_mesh/secondcloud.png ### Create a Polygonal Mesh @@ -60,7 +60,7 @@ A normal is essentially the direction a polygon is facing. To do this, go to `Edit` > `Normals` > `Compute`. You'll see this dialog box: -![Choose Triangulation surface model](https://raw.githubusercontent.com/gazebosim/gz-sim/gz-sim9/tutorials/files/point_cloud_to_mesh/compute_normals.png) +\image html files/point_cloud_to_mesh/compute_normals.png You’ll see various options in the dialog box that appears. The main thing you’ll want to consider is what `Local surface model` to use. @@ -73,7 +73,7 @@ Now we get to actually convert our point cloud to a mesh. To do this go to `Plugins` > `PoissonRecon`. You'll see this dialog box: -![Octree depth and output density selection](https://raw.githubusercontent.com/gazebosim/gz-sim/gz-sim9/tutorials/files/point_cloud_to_mesh/outputdensity.png) +\image html files/point_cloud_to_mesh/outputdensity.png The value you enter in the `Octree depth` field will determine the polygon count of the created model. You may have to run the surface reconstruction a couple times with varying values before you land on a polygon count that is suitable for your needs. @@ -94,18 +94,18 @@ Our tunnel has turned into a blob shape. This is because the mesh that CloudCompare creates will always be water tight even if it has to add polygons where there are no points. We just want our tunnels, though, so we need to remove those unnecessary polygons. -![The blob shape](https://raw.githubusercontent.com/gazebosim/gz-sim/gz-sim9/tutorials/files/point_cloud_to_mesh/blob2.jpg) +\image html files/point_cloud_to_mesh/blob2.jpg This is where our scalar field comes in. In the mesh's `Properties` window go to `SF display params` and take the left handle in the graph and drag it to the right until it hits the area where the bulk of the scalar field starts. -![Adjusting scalar filed params](https://raw.githubusercontent.com/gazebosim/gz-sim/gz-sim9/tutorials/files/point_cloud_to_mesh/sf_display.png) +\image html files/point_cloud_to_mesh/sf_display.png This will display only the polygons that were created from the point cloud and hide the polygons used to make the model watertight. The polygons are only hidden however. We still need to actually remove them. -![Display original polygons](https://raw.githubusercontent.com/gazebosim/gz-sim/gz-sim9/tutorials/files/point_cloud_to_mesh/hidden_polygons2.jpg) +\image html files/point_cloud_to_mesh/hidden_polygons2.jpg To remove the hidden polygons go to `Edit` > `Scalar fields` > `Filter By Value`. @@ -114,11 +114,11 @@ Hitting export will simply export the mesh within that range. Instead, we'll hit `Split` to create two meshes. One with the polygons inside our specified range and one containing polygons outside that range. -![Splitting the mesh](https://raw.githubusercontent.com/gazebosim/gz-sim/gz-sim9/tutorials/files/point_cloud_to_mesh/split.png) +\image html files/point_cloud_to_mesh/split.png It is possible that you will get error "Visibility table not instantiated". This error causes only the "wanted" part of the mesh to be created when splitting, while the other ("unwanted") part will not be generated. But that is not a problem for our use-case. -![Error: Visibility table not instantiated](https://raw.githubusercontent.com/gazebosim/gz-sim/gz-sim9/tutorials/files/point_cloud_to_mesh/error.jpg) +\image html files/point_cloud_to_mesh/error.jpg ### The Completed Model @@ -128,6 +128,6 @@ Your file format will depend on the software you want to use but `.obj` is a wid Before exporting, check your mesh for holes. If still checked, disable display of the pointcloud, so that only your output mesh is shown. Inspect ground parts of the mesh (or any other parts you are most interested in) and check if there aren't holes in it. If there are some, you can try to repeat the trimming step with more relaxed threshold. -![The completed mesh](https://raw.githubusercontent.com/gazebosim/gz-sim/gz-sim9/tutorials/files/point_cloud_to_mesh/complete2.png) +\image html files/point_cloud_to_mesh/complete2.png You can find more information on CloudCompare and a more in depth look at the tools we used in this tutorial on [the CloudCompare website](https://www.cloudcompare.org/) and the [CloudCompare wiki](https://www.cloudcompare.org/doc/wiki/index.php?title=Main_Page).