Welcome to dbus-mqtt-devices Discussions!

[freakent]

Welcome!

From 1st Feb 2024 this project will use GitHub Discussions as a place to connect with other members of our community. We hope that you:

• Ask questions about functionality or installation problems.
• Share ideas.
• Engage with other community members.

Please do not raise Issues without a starting a discussion first.

To get started, comment below with an introduction of yourself and tell us about what you do with this community.

[broekieman]

Hi,

I am very interested in technical things, so i have Home Assistant and since last week a home battery with Victron inverter. I am using a kwh meter by lan for grid meting. I have solarpanels with Enphase micro inverters who are visible in Home Assistant. Now i would like to send my Enphase production to Victron. Please tell me if this is posible without an extra meter or sensor. I have Mqtt installed in Home Assistant.

[stundenblume]

How does Tasmota get the data from my Enphase inverters?

That's just an example. You don't need a new (Tasmota) device. You can use the example to generate the same topics via HA using the existing Enphase data.

[broekieman]

I have the sensors created in home assistant but no data comes in. It says "unknown"

[stundenblume]

On the HA side I can't comment. I use ioBroker. You sad:

I have solarpanels with Enphase micro inverters who are visible in Home Assistant

So I assume you already have the Enphase data available and just need help to send it to the Victron system.

[broekieman]

How can i uninstall this?

[freakent]

There is an unistall.sh script in the bin directory. So from the command line just type:
cd /data/driver/dbus-mqtt-devices-
./bin/unistall.sh

[broekieman]

Do i need CT clamps or can it read directly from the Enphase gateway? Met vriendelijke groet, Maarten Broekman Op wo 2 okt 2024 om 07:19 schreef Sebastian S. ***@***.***>:

…

Hi, if you get the Power of your inverters, you can use this driver here to create a new PV inverter in the victron system and write via MQTT your data to the newly created device. See this example <https://github.com/freakent/dbus-mqtt-devices/wiki#get-tasmota-to-act-like-an-victron-recognized-pv-inverter> . Sebastian — Reply to this email directly, view it on GitHub <#77 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALHVBRAEINBNEGKBXCOIOODZZN64PAVCNFSM6AAAAABPC6FZPWVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAOBRGU4TMMI> . You are receiving this because you commented.Message ID: ***@***.*** com>