From fc16d5d1509826e1ac7c8e7f2666ffdbd711482b Mon Sep 17 00:00:00 2001 From: "Lori A. Burns" Date: Fri, 6 Jan 2023 16:06:21 -0500 Subject: [PATCH 01/64] new cmake harness by loriab and evaleev. squash of #148 (already in 205), #205, #233 --- .github/workflows/cmake.yml | 349 +- .gitignore | 32 + .project | 89 - CMakeLists.txt | 319 + INSTALL | 44 - INSTALL.md | 596 + LICENSE | 2 +- Makefile | 131 - README.md | 10 +- .../libint2 => archive_libtool}/config.h.in | 5 +- configure.ac => archive_libtool/configure.ac | 2 +- autogen.sh | 10 - bin/config.guess | 1645 --- bin/config.sub | 1797 --- bin/install-sh | 239 - bin/ltmain.sh | 11147 ---------------- bin/objectdir.pl | 167 - bin/update_libtool.sh | 8 - cmake/libint2-config.cmake.in | 262 + cmake/libint2.pc.cmake.in | 10 + .../modules/AddCustomTargetSubproject.cmake | 0 cmake/modules/FindEigen3.cmake | 134 + cmake/modules/FindMultiprecision.cmake | 346 + cmake/modules/JoinPaths.cmake | 23 + cmake/modules/autocmake_safeguards.cmake | 26 + cmake/modules/int_am.cmake | 363 + cmake/modules/int_computed.cmake.in | 46 + cmake/modules/int_orderings.cmake | 55 + cmake/modules/int_versions.cmake | 38 + cmake/modules/options.cmake | 187 + cmake/modules/xhost.cmake | 23 + doc/CMakeLists.txt | 1 + doc/classdoc/CMakeLists.txt | 20 + export/INSTALL.export | 8 - export/Makefile | 107 - export/cmake/modules/FindMPFR.cmake | 93 - .../cmake/modules/RedefaultableOption.cmake | 12 - include/libint2/basis.h.in | 47 +- include/libint2/boys.h | 15 +- include/libint2/config.h.cmake.in | 380 + include/libint2/config2.h.cmake.in | 57 + include/libint2/diis.h | 4 + include/libint2/engine.impl.h | 4 + include/libint2/lcao/molden.h | 4 + include/libint2/numeric.h | 24 + include/libint2/util/memory.h | 4 + include/libint2/util/vector_x86.h | 4 +- lib/MakeRules | 23 - lib/MakeSuffixRules | 40 - lib/autoconf/acx_check_cpp11.m4 | 443 - lib/autoconf/acx_check_eigen.m4 | 31 - lib/autoconf/acx_check_gmpxx.m4 | 35 - lib/autoconf/ax_boost_base.m4 | 301 - lib/autoconf/libtool.m4 | 8369 ------------ lib/autoconf/ltoptions.m4 | 437 - lib/autoconf/ltsugar.m4 | 124 - lib/autoconf/ltversion.m4 | 23 - lib/autoconf/lt~obsolete.m4 | 99 - lib/basis/{6-311g**.g94 => 6-311g_d_p_.g94} | 0 lib/basis/6-31g*.g94 | 804 -- lib/basis/{6-31G*.g94 => 6-31g_d_.g94} | 0 lib/basis/{6-31g**.g94 => 6-31g_d_p_.g94} | 0 libint2.pc.in | 10 - src/CMakeLists.txt | 2 + src/Makefile | 82 - src/bin/CMakeLists.txt | 1 + src/bin/MakeVars.in | 79 - src/bin/Makefile | 80 - src/bin/libint/CMakeLists.txt | 88 + src/bin/libint/Makefile | 114 - src/bin/libint/bfset.h | 1 + src/bin/libint/build_libint.cc | 8 +- src/bin/libint/default_params.h | 1 + src/bin/libint/gauss.cc | 3 +- src/bin/libint/prefactors.cc | 8 +- src/bin/libint/prefactors.h | 4 + src/bin/libint/tactic.cc | 6 +- src/bin/libint/tactic.h | 6 +- src/bin/libint/task.cc | 4 +- src/bin/libint/util.h | 2 + src/bin/profile/Makefile | 59 - src/bin/profile/generate_t0g12_code.cc | 67 - src/bin/test_eri/Makefile | 96 - src/bin/test_eri/test_eri.cc | 263 - src/lib/CMakeLists.txt | 1 + src/lib/MakeRules.in | 121 - src/lib/MakeVars.in | 113 - src/lib/Makefile | 82 - src/lib/libint/CMakeLists.txt | 176 + src/lib/libint/CMakeLists.txt.export | 734 + src/lib/libint/INSTALL.export | 7 + {export => src/lib/libint}/LICENSE.export | 2 +- src/lib/libint/Makefile | 16 - src/lib/libint/Makefile.library | 63 - src/lib/libint/engine.cpp | 30 + .../{MakeVars.features.in => features.in} | 2 +- {export => src/lib/libint}/fortran/c_to_f.py | 0 .../lib/libint}/fortran/libint_f.F90 | 0 .../lib/libint}/fortran/make_defs.py | 0 src/lib/libint/populate.cmake | 89 + src/lib/libint/tests/CMakeLists.txt | 164 + {tests => src/lib/libint/tests}/eri/ssss.nb | 0 src/lib/libint/tests/eri/test.cc | 1050 ++ .../libint/tests}/fortran/fortran_example.F90 | 0 .../lib/libint/tests}/fortran/test-eri.cc | 28 +- .../lib/libint/tests}/fortran/test.cc | 4 +- .../lib/libint/tests}/hartree-fock/h2o.xyz | 0 .../tests}/hartree-fock/h2o_rotated.xyz | 0 .../hartree-fock/hartree-fock++-validate.py | 6 + .../tests}/hartree-fock/hartree-fock++.cc | 2 +- .../hartree-fock/hartree-fock-validate.py | 0 .../tests}/hartree-fock/hartree-fock.cc | 2 +- .../libint/tests/hartree-fock/hftest.cmake | 44 + .../lib/libint/tests}/unit/c-api-util.cc | 0 {tests => src/lib/libint/tests}/unit/c-api.c | 0 .../lib/libint/tests}/unit/catch.hpp | 0 .../lib/libint/tests}/unit/fixture.h | 2 +- .../lib/libint/tests}/unit/test-1body.cc | 0 .../lib/libint/tests}/unit/test-2body.cc | 2 + .../lib/libint/tests}/unit/test-c-api.cc | 0 .../lib/libint/tests}/unit/test-core-ints.cc | 0 .../lib/libint/tests}/unit/test-core.cc | 0 .../lib/libint/tests}/unit/test-permute.cc | 0 .../lib/libint/tests}/unit/test-precision.cc | 0 .../libint/tests}/unit/test-shell-order.cc | 0 .../lib/libint/tests}/unit/test-util.cc | 0 {tests => src/lib/libint/tests}/unit/test.cc | 2 +- tests/CMakeLists.txt | 6 + tests/MakeVars.in | 80 - tests/core/CMakeLists.txt | 18 + {src/bin/profile => tests/core}/chrono.cc | 0 {src/bin/profile => tests/core}/profile.cc | 41 +- {src/bin/libint => tests/core}/test.cc | 0 tests/eri/CMakeLists.txt | 9 + tests/eri/Makefile | 114 +- {src/bin/test_eri => tests/eri}/eri.h | 0 .../eri/generate.cc | 0 .../bin/test_eri => tests/eri}/prep_libint2.h | 3 +- .../test_eri => tests/eri}/run_time_eri.pl.in | 0 .../eri}/run_timing_suite.pl.in | 0 .../eri}/simd_wrapped_vector.hpp | 4 +- .../bin/test_eri => tests/eri}/stdtests.pl.in | 0 tests/eri/test.cc | 1132 +- .../bin/test_eri => tests/eri}/test_eri.pl.in | 2 +- .../test_eri => tests/eri}/test_eri_rys.cc | 0 .../eri}/test_eri_rys_vec.cc | 6 +- {src/bin/test_eri => tests/eri}/time_eri.cc | 37 +- .../bin/test_eri => tests/eri}/time_eri.pl.in | 0 tests/hartree-fock/Makefile | 110 - tests/unit/Makefile | 105 - 150 files changed, 6134 insertions(+), 28877 deletions(-) create mode 100644 .gitignore delete mode 100644 .project create mode 100644 CMakeLists.txt delete mode 100644 INSTALL create mode 100644 INSTALL.md delete mode 100644 Makefile rename {include/libint2 => archive_libtool}/config.h.in (99%) rename configure.ac => archive_libtool/configure.ac (99%) delete mode 100755 autogen.sh delete mode 100755 bin/config.guess delete mode 100644 bin/config.sub delete mode 100755 bin/install-sh delete mode 100644 bin/ltmain.sh delete mode 100644 bin/objectdir.pl delete mode 100755 bin/update_libtool.sh create mode 100644 cmake/libint2-config.cmake.in create mode 100644 cmake/libint2.pc.cmake.in rename {export/cmake => cmake}/modules/AddCustomTargetSubproject.cmake (100%) create mode 100644 cmake/modules/FindEigen3.cmake create mode 100644 cmake/modules/FindMultiprecision.cmake create mode 100644 cmake/modules/JoinPaths.cmake create mode 100644 cmake/modules/autocmake_safeguards.cmake create mode 100644 cmake/modules/int_am.cmake create mode 100644 cmake/modules/int_computed.cmake.in create mode 100644 cmake/modules/int_orderings.cmake create mode 100644 cmake/modules/int_versions.cmake create mode 100644 cmake/modules/options.cmake create mode 100644 cmake/modules/xhost.cmake create mode 100644 doc/CMakeLists.txt create mode 100644 doc/classdoc/CMakeLists.txt delete mode 100644 export/INSTALL.export delete mode 100644 export/Makefile delete mode 100644 export/cmake/modules/FindMPFR.cmake delete mode 100644 export/cmake/modules/RedefaultableOption.cmake create mode 100644 include/libint2/config.h.cmake.in create mode 100644 include/libint2/config2.h.cmake.in delete mode 100644 lib/MakeRules delete mode 100644 lib/MakeSuffixRules delete mode 100644 lib/autoconf/acx_check_cpp11.m4 delete mode 100644 lib/autoconf/acx_check_eigen.m4 delete mode 100644 lib/autoconf/acx_check_gmpxx.m4 delete mode 100644 lib/autoconf/ax_boost_base.m4 delete mode 100644 lib/autoconf/libtool.m4 delete mode 100644 lib/autoconf/ltoptions.m4 delete mode 100644 lib/autoconf/ltsugar.m4 delete mode 100644 lib/autoconf/ltversion.m4 delete mode 100644 lib/autoconf/lt~obsolete.m4 rename lib/basis/{6-311g**.g94 => 6-311g_d_p_.g94} (100%) delete mode 100644 lib/basis/6-31g*.g94 rename lib/basis/{6-31G*.g94 => 6-31g_d_.g94} (100%) rename lib/basis/{6-31g**.g94 => 6-31g_d_p_.g94} (100%) delete mode 100644 libint2.pc.in create mode 100644 src/CMakeLists.txt delete mode 100644 src/Makefile create mode 100644 src/bin/CMakeLists.txt delete mode 100644 src/bin/MakeVars.in delete mode 100644 src/bin/Makefile create mode 100644 src/bin/libint/CMakeLists.txt delete mode 100644 src/bin/libint/Makefile delete mode 100644 src/bin/profile/Makefile delete mode 100644 src/bin/profile/generate_t0g12_code.cc delete mode 100644 src/bin/test_eri/Makefile delete mode 100644 src/bin/test_eri/test_eri.cc create mode 100644 src/lib/CMakeLists.txt delete mode 100644 src/lib/MakeRules.in delete mode 100644 src/lib/MakeVars.in delete mode 100644 src/lib/Makefile create mode 100644 src/lib/libint/CMakeLists.txt create mode 100644 src/lib/libint/CMakeLists.txt.export create mode 100644 src/lib/libint/INSTALL.export rename {export => src/lib/libint}/LICENSE.export (94%) delete mode 100644 src/lib/libint/Makefile delete mode 100644 src/lib/libint/Makefile.library create mode 100644 src/lib/libint/engine.cpp rename src/lib/libint/{MakeVars.features.in => features.in} (86%) rename {export => src/lib/libint}/fortran/c_to_f.py (100%) rename {export => src/lib/libint}/fortran/libint_f.F90 (100%) rename {export => src/lib/libint}/fortran/make_defs.py (100%) create mode 100644 src/lib/libint/populate.cmake create mode 100644 src/lib/libint/tests/CMakeLists.txt rename {tests => src/lib/libint/tests}/eri/ssss.nb (100%) create mode 100644 src/lib/libint/tests/eri/test.cc rename {export => src/lib/libint/tests}/fortran/fortran_example.F90 (100%) rename {export => src/lib/libint/tests}/fortran/test-eri.cc (95%) rename {export => src/lib/libint/tests}/fortran/test.cc (93%) rename {tests => src/lib/libint/tests}/hartree-fock/h2o.xyz (100%) rename {tests => src/lib/libint/tests}/hartree-fock/h2o_rotated.xyz (100%) rename {tests => src/lib/libint/tests}/hartree-fock/hartree-fock++-validate.py (99%) rename {tests => src/lib/libint/tests}/hartree-fock/hartree-fock++.cc (99%) rename {tests => src/lib/libint/tests}/hartree-fock/hartree-fock-validate.py (100%) rename {tests => src/lib/libint/tests}/hartree-fock/hartree-fock.cc (99%) create mode 100644 src/lib/libint/tests/hartree-fock/hftest.cmake rename {tests => src/lib/libint/tests}/unit/c-api-util.cc (100%) rename {tests => src/lib/libint/tests}/unit/c-api.c (100%) rename {tests => src/lib/libint/tests}/unit/catch.hpp (100%) rename {tests => src/lib/libint/tests}/unit/fixture.h (95%) rename {tests => src/lib/libint/tests}/unit/test-1body.cc (100%) rename {tests => src/lib/libint/tests}/unit/test-2body.cc (99%) rename {tests => src/lib/libint/tests}/unit/test-c-api.cc (100%) rename {tests => src/lib/libint/tests}/unit/test-core-ints.cc (100%) rename {tests => src/lib/libint/tests}/unit/test-core.cc (100%) rename {tests => src/lib/libint/tests}/unit/test-permute.cc (100%) rename {tests => src/lib/libint/tests}/unit/test-precision.cc (100%) rename {tests => src/lib/libint/tests}/unit/test-shell-order.cc (100%) rename {tests => src/lib/libint/tests}/unit/test-util.cc (100%) rename {tests => src/lib/libint/tests}/unit/test.cc (96%) create mode 100644 tests/CMakeLists.txt delete mode 100644 tests/MakeVars.in create mode 100644 tests/core/CMakeLists.txt rename {src/bin/profile => tests/core}/chrono.cc (100%) rename {src/bin/profile => tests/core}/profile.cc (96%) rename {src/bin/libint => tests/core}/test.cc (100%) create mode 100644 tests/eri/CMakeLists.txt rename {src/bin/test_eri => tests/eri}/eri.h (100%) rename src/bin/test_eri/generate_eri_code.cc => tests/eri/generate.cc (100%) rename {src/bin/test_eri => tests/eri}/prep_libint2.h (99%) rename {src/bin/test_eri => tests/eri}/run_time_eri.pl.in (100%) rename {src/bin/test_eri => tests/eri}/run_timing_suite.pl.in (100%) rename {src/bin/test_eri => tests/eri}/simd_wrapped_vector.hpp (99%) rename {src/bin/test_eri => tests/eri}/stdtests.pl.in (100%) rename {src/bin/test_eri => tests/eri}/test_eri.pl.in (98%) rename {src/bin/test_eri => tests/eri}/test_eri_rys.cc (100%) rename {src/bin/test_eri => tests/eri}/test_eri_rys_vec.cc (99%) rename {src/bin/test_eri => tests/eri}/time_eri.cc (77%) rename {src/bin/test_eri => tests/eri}/time_eri.pl.in (100%) delete mode 100644 tests/hartree-fock/Makefile delete mode 100644 tests/unit/Makefile diff --git a/.github/workflows/cmake.yml b/.github/workflows/cmake.yml index b123d1695..19b60e606 100644 --- a/.github/workflows/cmake.yml +++ b/.github/workflows/cmake.yml @@ -1,38 +1,73 @@ -name: Linux/MacOS Build +name: CI on: [push, pull_request] -#env: - jobs: - build: + build_repo: strategy: fail-fast: false matrix: - build_type : [ Release, Debug ] - os : [ macos-latest, ubuntu-20.04 ] - include: - - os: ubuntu-20.04 - cxx: /usr/bin/g++-9 - - os: macos-latest + cfg: + - runs-on: ubuntu-latest + build_type: Release + cxx: g++-9 + cc: gcc-9 + fc: gfortran-9 + args: > + -DENABLE_FORTRAN=ON + + - runs-on: macos-latest + build_type: Release + cxx: clang++ + cc: clang + args: > + -DENABLE_FORTRAN=ON + -DCMAKE_Fortran_COMPILER=gfortran-10 + + - runs-on: windows-2022 + build_type: Release + cxx: clang-cl + cc: clang-cl + args: "" + + - runs-on: ubuntu-20.04 + build_type: Debug + cxx: g++-9 + cc: gcc-9 + fc: gfortran-9 + args: > + -DENABLE_FORTRAN=ON + + - runs-on: macos-latest + build_type: Debug cxx: clang++ + cc: clang + args: > + -DENABLE_FORTRAN=ON + -DCMAKE_Fortran_COMPILER=gfortran-10 - name: "${{ matrix.os }}: ${{ matrix.cxx }} ${{ matrix.build_type }}" - runs-on: ${{ matrix.os }} + name: "Repo • ${{ matrix.cfg.runs-on }} • ${{ matrix.cfg.cxx }} • ${{ matrix.cfg.build_type }} • ${{ matrix.cfg.args }}" + runs-on: ${{ matrix.cfg.runs-on }} env: - CXX : ${{ matrix.cxx }} + CXX : ${{ matrix.cfg.cxx }} + CC : ${{ matrix.cfg.cc }} CCACHE_DIR : ${{github.workspace}}/build/.ccache CCACHE_COMPRESS : true CCACHE_COMPRESSLEVEL : 6 BUILD_CONFIG : > -G Ninja - -DCMAKE_BUILD_TYPE=${{ matrix.build_type }} - -DCMAKE_PREFIX_PATH=/usr/local/Cellar/eigen/3.3.9;/usr/local/opt/bison + -DCMAKE_BUILD_TYPE=${{ matrix.cfg.build_type }} -DBUILD_SHARED_LIBS=OFF - -DCMAKE_POSITION_INDEPENDENT_CODE=ON -DMPIEXEC_PREFLAGS='--bind-to;none;--allow-run-as-root' - -DENABLE_FORTRAN=ON - -DCMAKE_INSTALL_PREFIX=${{github.workspace}}/build/library/install + -DCMAKE_INSTALL_PREFIX=${{github.workspace}}/installed + -DWITH_MAX_AM=3;2 + -DWITH_ERI_MAX_AM=2;2 + -DWITH_ERI3_MAX_AM=3;2 + -DENABLE_ERI=1 + -DENABLE_ERI3=1 + -DENABLE_ONEBODY=1 + -DDISABLE_ONEBODY_PROPERTY_DERIVS=ON + -DMULTIPOLE_MAX_ORDER=2 outputs: should_skip: ${{ steps.skip_check.outputs.should_skip }} @@ -49,25 +84,50 @@ jobs: if: ${{ steps.skip_check.outputs.should_skip != 'true' }} # Some projects don't allow in-source building, so create a separate build directory # We'll use this as our working directory for all subsequent commands + # N.B. can't seem to create ${{github.workspace}}/install for some reason, use 'installed' run: | - cmake -E make_directory ${{github.workspace}}/build/compiler - cmake -E make_directory ${{github.workspace}}/build/library - cmake -E make_directory ${{github.workspace}}/build/library_test + cmake -E make_directory ${{github.workspace}}/build + cmake -E make_directory ${{github.workspace}}/test_installed_library + cmake -E make_directory ${{github.workspace}}/installed - - name: Install prerequisite MacOS packages - if: ${{ steps.skip_check.outputs.should_skip != 'true' && matrix.os == 'macos-latest' }} + - name: Install MacOS prerequisites + if: ${{ steps.skip_check.outputs.should_skip != 'true' && runner.os == 'macOS' }} run: | - brew install ninja gcc@10 boost eigen bison ccache automake python3 numpy scipy - echo "FC=/usr/local/bin/gfortran-10" >> $GITHUB_ENV - echo "EIGEN3_INCLUDE_DIR=/usr/local/include/eigen3" >> $GITHUB_ENV + brew install ninja gcc@10 boost eigen ccache + brew install ninja gcc@10 boost eigen ccache python3 numpy scipy - - name: Install prerequisites Ubuntu packages - if: ${{ steps.skip_check.outputs.should_skip != 'true' && matrix.os == 'ubuntu-20.04' }} + - name: Install Ubuntu prerequisites + if: ${{ steps.skip_check.outputs.should_skip != 'true' && runner.os == 'Linux' }} run: | sudo apt-get update - sudo apt-get install ninja-build g++-9 gfortran-9 liblapack-dev libboost-dev libeigen3-dev ccache python3-numpy python3-scipy - echo "FC=/usr/bin/gfortran-9" >> $GITHUB_ENV - echo "EIGEN3_INCLUDE_DIR=/usr/include/eigen3" >> $GITHUB_ENV + sudo apt-get install ninja-build ${{ matrix.cfg.cxx }} ${{ matrix.cfg.fc }} liblapack-dev libmpfr-dev libboost-dev libeigen3-dev ccache python3-numpy python3-scipy + + - name: Install Windows prerequisites, part 1, Create Conda Environment + if: ${{ steps.skip_check.outputs.should_skip != 'true' && runner.os == 'Windows' }} + uses: conda-incubator/setup-miniconda@v2 + with: + activate-environment: "" + add-pip-as-python-dependency: true + auto-activate-base: true + conda-build-version: "*" + show-channel-urls: true + + # Note: `shell: bash -l {0}` makes Miniconda created above for Windows available to + # subsequent steps. see https://github.com/conda-incubator/setup-miniconda#usage-examples + + - name: Install Windows prerequisites, part 2, Environment Information + if: ${{ steps.skip_check.outputs.should_skip != 'true' && runner.os == 'Windows' }} + shell: bash -l {0} + run: | + conda info + conda install ninja cmake=3.16 python mpir boost eigen ccache -c conda-forge --yes + conda list + + - name: Prepare compiler environment for Windows + if: ${{ steps.skip_check.outputs.should_skip != 'true' && runner.os == 'Windows' }} + uses: ilammy/msvc-dev-cmd@v1 + with: + arch: x64 - name: Prepare ccache timestamp if: ${{ steps.skip_check.outputs.should_skip != 'true' }} @@ -86,55 +146,60 @@ jobs: restore-keys: | ${{ matrix.config.name }}-ccache- - - name: Generate configure script - if: ${{ steps.skip_check.outputs.should_skip != 'true' }} - shell: bash + - name: Generate & Build Libint Library (ExternalProject, cplr tests) + if: ${{ steps.skip_check.outputs.should_skip != 'true' && matrix.cfg.build_type != 'Debug'}} + shell: bash -l {0} working-directory: ${{github.workspace}} - run: ./autogen.sh && ls -l ${{github.workspace}}/configure - - - name: Generate Libint library - if: ${{ steps.skip_check.outputs.should_skip != 'true' }} - # Use a bash shell so we can use the same syntax for environment variable - # access regardless of the host operating system - shell: bash - working-directory: ${{github.workspace}}/build/compiler run: | - CPPFLAGS="-I$EIGEN3_INCLUDE_DIR" CXXFLAGS="-std=c++11 -Wno-enum-compare" ${{github.workspace}}/configure --with-max-am=2,2 --with-eri-max-am=2,2 --with-eri3-max-am=3,2 --enable-eri=1 --enable-eri3=1 --enable-1body=1 --disable-1body-property-derivs --with-multipole-max-order=2 - make -j3 - make check - cd src/bin/test_eri && ./stdtests.pl && cd ../../.. - make export + cmake -S . -B build -DCMAKE_BUILD_TYPE=${{ matrix.cfg.build_type }} $BUILD_CONFIG ${{ matrix.cfg.args }} + #cmake --build build --target export # toggle for quick tarball to debug `build_export` + cmake --build build --target library check-libint2compiler install + cd build && echo "ARTIFACT=`ls -1 libint*tgz`" >> $GITHUB_ENV - - name: Build+test+install Libint library - if: ${{ steps.skip_check.outputs.should_skip != 'true' }} - shell: bash - working-directory: ${{github.workspace}}/build/library + - name: Generate & Build Libint Library (FetchContent, full tests) + if: ${{ steps.skip_check.outputs.should_skip != 'true' && matrix.cfg.build_type == 'Debug'}} + shell: bash -l {0} + working-directory: ${{github.workspace}} run: | - tar -xzf ../compiler/libint-2*.tgz - cd libint-2* - echo "LIBINT_EXPORTED_DIR=`pwd`" >> $GITHUB_ENV - cmake -S . -B build -DCMAKE_BUILD_TYPE=$BUILD_TYPE -DPYTHON_EXECUTABLE=`which python3` $BUILD_CONFIG - cmake --build build --target check + cmake -S . -B build -DCMAKE_BUILD_TYPE=${{ matrix.cfg.build_type }} -DLIBINT_BUILD_LIBRARY_AS_SUBPROJECT=ON -DPYTHON_EXECUTABLE=`which python3` $BUILD_CONFIG ${{ matrix.cfg.args }} + cmake --build build --target export + cmake --build build --target check-libint2compiler + cmake --build build --target check-libint2 cmake --build build --target install - - name: Test installed Libint library + - name: Archive Library Tarball + if: ${{ steps.skip_check.outputs.should_skip != 'true' && matrix.cfg.build_type == 'Release'}} + uses: actions/upload-artifact@v2 + with: + if-no-files-found: error + name: ${{ runner.os }}-${{ matrix.cfg.cxx }} + path: build/${{ env.ARTIFACT }} + retention-days: 1 + + - name: Test Installed Libint Library + #if: false # toggle for quick tarball to debug `build_export` if: ${{ steps.skip_check.outputs.should_skip != 'true' }} - shell: bash - working-directory: ${{github.workspace}}/build/library_test + shell: bash -l {0} + working-directory: ${{github.workspace}}/test_installed_library run: | cat > CMakeLists.txt < + -DBUILD_SHARED_LIBS=ON + -DLIBINT_LOCAL_Eigen3_INSTALL=ON + -DEigen3_ROOT="/usr/share/miniconda/envs/onlyeigen/" + testargs: > + -DLIBINT_LOCAL_Eigen3_FIND=ON + + - runs-on: macos-latest + libargs: > + -DBUILD_SHARED_LIBS=ON + testargs: "" + + - runs-on: windows-latest + libargs: > + -DBUILD_SHARED_LIBS=OFF + -DCMAKE_CXX_COMPILER=clang-cl + -DCMAKE_C_COMPILER=clang-cl + testargs: > + -DCMAKE_CXX_COMPILER=clang-cl + -DCMAKE_C_COMPILER=clang-cl + + name: "Export • ${{ matrix.cfg.runs-on }} • ${{ matrix.cfg.libargs }}" + runs-on: ${{ matrix.cfg.runs-on }} + + steps: + # Note we're not checking out the repo. All src from Linux tarball generated above. + + - name: Write a Conda Env File + shell: bash -l {0} + run: | + cat > export.yaml <=3.16 + - ninja + - cxx-compiler + - python 3.9 + - boost + - eigen + EOF + if [[ "${{ runner.os }}" == "Windows" ]]; then + sed -i "s/- cxx/#- cxx/g" export.yaml + fi + cat export.yaml + + - name: Create Conda Environment + uses: conda-incubator/setup-miniconda@v2 + with: + mamba-version: "*" + activate-environment: test + channels: conda-forge + environment-file: export.yaml + show-channel-urls: true + + # Step is unnecessary; remove for debugging. + - name: Confound Environment - test bundled Boost + if: ${{ runner.os == 'macOS' }} + shell: bash -l {0} + run: conda remove boost + + # Step is unnecessary; remove for debugging. + - name: Confound Environment - test non-cmake-installed Eigen + if: ${{ runner.os == 'Windows' }} + shell: bash -l {0} + run: rm -rf "${CONDA_PREFIX}/Library/share/eigen3/cmake/" + + # Step is unnecessary; remove step and 3 "*Eigen3*" options in matrix for debugging. + - name: Confound Environment - test handed-off Eigen + if: ${{ runner.os == 'Linux' }} + shell: bash -l {0} + run: | + conda remove eigen + conda create -n onlyeigen eigen -c conda-forge + + - name: Environment Information + shell: bash -l {0} + run: | + conda info + conda list + + - name: Prepare compiler environment for Windows + if: ${{ runner.os == 'Windows' }} + uses: ilammy/msvc-dev-cmd@v1 + with: + arch: x64 + + - uses: actions/download-artifact@master + with: + name: Linux-g++-9 + + - name: Extract, Build, Install Libint Library + shell: bash -l {0} + run: | + tar -zxf libint*tgz + mkdir libint && mv libint-2*/* libint/ && cd libint/ + cmake \ + -S. \ + -Bbuild \ + -G"Ninja" \ + -DCMAKE_BUILD_TYPE=Release \ + -DCMAKE_INSTALL_PREFIX="${{github.workspace}}/installed" \ + -DCMAKE_CXX_COMPILER=${CXX} \ + -DCMAKE_PREFIX_PATH="${CONDA_PREFIX}" \ + ${{ matrix.cfg.libargs }} + cmake --build build --target install + + - name: Test Installed Libint library + shell: bash -l {0} + run: | + mkdir test_installed_library && cd test_installed_library + cat > CMakeLists.txt < - - libint - - - - - - net.sourceforge.texlipse.builder.TexlipseBuilder - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.buildLocation - /Users/evaleev/Development/workspace/build/libint2-clang/src/bin/libint - - - org.eclipse.cdt.make.core.cleanBuildTarget - realclean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - net.sourceforge.texlipse.builder.TexlipseNature - org.eclipse.cdt.core.cnature - org.eclipse.cdt.core.ccnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - diff --git a/CMakeLists.txt b/CMakeLists.txt new file mode 100644 index 000000000..7570380e2 --- /dev/null +++ b/CMakeLists.txt @@ -0,0 +1,319 @@ +cmake_minimum_required(VERSION 3.16) +cmake_policy(SET CMP0074 NEW) + +############################# Version and Metadata ############################# + +project( + Libint2Compiler + VERSION 2.7.1 + DESCRIPTION "High-performance library for computing Gaussian integrals in quantum mechanics" + HOMEPAGE_URL "https://github.com/evaleev/libint" + LANGUAGES CXX + ) + +set(${PROJECT_NAME}_AUTHORS "Edward F. Valeev") +set(${PROJECT_NAME}_LICENSE "GPL-3.0 for generator; LGPL-3.0 for generated") + +# along with project(... VERSION) above, these are the authoritative version source (formerly in configure.ac) +set(LIBINT_BUILDID "") +set(LIBINT_SOVERSION "2:3:0") + +list(APPEND CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/cmake/modules) +include(int_versions) + +set(L2 Libint2) # Namespace +set(pnv libint2) # projectnameversion + +################################### Overview ################################### + +# CMake build overview: +# +# >>> ls +# cmake/ COPYING src/ tests/ ... +# >>> cmake -S. -Bbuild -GNinja -DCMAKE_INSTALL_PREFIX=/path/to/install-libint ... +# ... +# -- Generating done +# -- Build files have been written to: /current/dir/build +# >>> cmake --build build --target install -j`getconf _NPROCESSORS_ONLN` + +# The build is structured into three parts: +# +# * generator +# - build src/bin/libint/ into executable `build_libint` +# - pretty quick, runs in parallel +# - consumes all the enable/max/opt integral options and all orderings options except solid harmonic +# * export +# - run `build_libint` to generate library source (C++) files (that upon +# compilation can become a Libint2 library) and combine them with other +# static source files in src/lib/libint/ and general static files (e.g., +# include/ and docs/) into an independent tarball ready for distribution. +# - really slow for non-trivial angular momenta, runs in serial +# - consumes no options +# - build target `export` to stop after this step and collect source tarball +# * library +# - can be build as a subproject (FetchContent) or completely insulated (bare ExternalProject; default) +# - if building via bare ExternalProject: +# - unpack the export tarball and build the library and install into stage/ +# - duration depends on number of integrals requested, runs in parallel +# - consumes solid harmonic ordering and the CMAKE_INSTALL_[DATA|INCLUDE|LIB]DIR +# - the default target build includes this final library build +# - if building via FetchContent: +# - must build libint-library-export target before library *build* targets appear + +################################### Options #################################### +include(options) +include(GNUInstallDirs) +include(CTest) +message(STATUS "Building using CMake ${CMAKE_VERSION} Generator ${CMAKE_GENERATOR}") + +# <<< General >>> + +option_with_default(CMAKE_BUILD_TYPE "Build type (Release or Debug)" Release) + +### compiler-only +option_with_default(LIBINT_BUILD_LIBRARY_AS_SUBPROJECT "[EXPERT] Build generated library as a subproject; if FALSE will configure and build separately" OFF) + +### library-only +option_with_default(REQUIRE_CXX_API "C++11 Libint API: define library targets + test (requires Eigen3; Boost is optional but strongly recommended)" ON) +option_with_default(REQUIRE_CXX_API_COMPILED "Build C++11 Compiled (not just header-only) targets (requires Eigen3; Boost strongly recommended)" ON) +option_with_default(ENABLE_FORTRAN "Build Fortran03+ Libint interface (requires Fortran)" OFF) + +option_with_print(BUILD_SHARED_LIBS "Build Libint library as shared, not static" OFF) +option_with_print(LIBINT2_BUILD_SHARED_AND_STATIC_LIBS "Build both shared and static Libint libraries in one shot. Uses -fPIC." OFF) + +# <<< Which Integrals Classes, Which Derivative Levels >>> + +option_with_default(ENABLE_ONEBODY + "Compile with support for up to N-th derivatives of 1-body integrals (-1 for OFF)" 0) +option_with_default(ENABLE_ERI + "Compile with support for up to N-th derivatives of 4-center electron repulsion integrals (-1 for OFF)" 0) +option_with_default(ENABLE_ERI3 + "Compile with support for up to N-th derivatives of 3-center electron repulsion integrals (-1 for OFF)" -1) +option_with_default(ENABLE_ERI2 + "Compile with support for up to N-th derivatives of 2-center electron repulsion integrals (-1 for OFF)" -1) +option_with_default(ENABLE_G12 + "Compile with support for N-th derivatives of MP2-F12 energies with Gaussian factors (-1 for OFF)" -1) +option_with_default(ENABLE_G12DKH + "Compile with support for N-th derivatives of DKH-MP2-F12 energies with Gaussian factors (-1 for OFF)" -1) + +option_with_print(DISABLE_ONEBODY_PROPERTY_DERIVS + "Disable geometric derivatives of 1-body property integrals (all but overlap, kinetic, elecpot). + These derivatives are disabled by default to save compile time. (enable with OFF)" ON) +option_with_print(ENABLE_T1G12_SUPPORT + "Enable Ti,G12 integrals when G12 integrals are enabled. Irrelevant when `ENABLE_G12=OFF`. (disable with OFF)" ON) + +# <<< Ordering Conventions >>> + +option_with_default(LIBINT2_SHGAUSS_ORDERING + "Ordering for shells of solid harmonic Gaussians: + standard -- standard ordering (-l, -l+1 ... l) + gaussian -- the Gaussian ordering (0, 1, -1, 2, -2, ... l, -l) + Consumed at library build-time." standard) +option_with_default(LIBINT2_CARTGAUSS_ORDERING + "Orderings for shells of cartesian Gaussians: + standard -- standard ordering (xxx, xxy, xxz, xyy, xyz, xzz, yyy, ...) + intv3 -- intv3 ordering (yyy, yyz, yzz, zzz, xyy, xyz, xzz, xxy, xxz, xxx) + gamess -- GAMESS ordering (xxx, yyy, zzz, xxy, xxz, yyx, yyz, zzx, zzy, xyz) + orca -- ORCA ordering (hydrid between GAMESS and standard) + bagel -- axis-permuted version of intv3 (xxx, xxy, xyy, yyy, xxz, xyz, yyz, xzz, yzz, zzz)" standard) +option_with_default(LIBINT2_SHELL_SET + "Support computation of shell sets sets subject to these restrictions: + standard -- standard ordering: + for (ab|cd): + l(a) >= l(b), + l(c) >= l(d), + l(a)+l(b) <= l(c)+l(d) + for (b|cd): + l(c) >= l(d) + orca -- ORCA ordering: + for (ab|cd): + l(a) <= l(b), + l(c) <= l(d), + l(a) < l(c) || (l(a) == l(c) && l(b) < l(d)) + for (b|cd): + l(c) <= l(d)" standard) +option_with_print(ERI3_PURE_SH + "Assume the 'unpaired' center of 3-center ERIs will be transformed to pure solid harmonics" OFF) +option_with_print(ERI2_PURE_SH + "Assume the 2-center ERIs will be transformed to pure solid harmonics" OFF) + +# <<< How High Angular Momentum >>> + +# example for "semicolon-separated string": `-DENABLE_ERI3=2 -DWITH_ERI3_MAX_AM="5;4;3"` + +# high MAX_AM generating >20k files may require `ulimit -s 65535` for linking library target on Linux to avert "ld: Argument list too long" + +option_with_default(WITH_MAX_AM + "Support Gaussians of angular momentum up to N. + Can specify values for each derivative level as a semicolon-separated string" 4) +option_with_default(WITH_OPT_AM + "Optimize maximally for up to angular momentum N (N <= max-am). + Can specify values for each derivative level as a semicolon-separated string. (default: (libint_max_am/2)+1)" -1) + +option_with_default(MULTIPOLE_MAX_ORDER + "Maximum order of spherical multipole integrals. There is no maximum" 4) +option_with_default(WITH_ONEBODY_MAX_AM + "Support 1-body ints for Gaussians of angular momentum up to N. + Can specify values for each derivative level as a semicolon-separated string. (default: max_am)" -1) +option_with_default(WITH_ONEBODY_OPT_AM + "Optimize 1-body ints maximally for up to angular momentum N (N <= max-am). + Can specify values for each derivative level as a semicolon-separated string (default: (max_am/2)+1)" -1) + +option_with_default(WITH_ERI_MAX_AM + "Support 4-center ERIs for Gaussians of angular momentum up to N. + Can specify values for each derivative level as a semicolon-separated string. (default: max_am)" -1) +option_with_default(WITH_ERI_OPT_AM + "Optimize 4-center ERIs maximally for up to angular momentum N (N <= max-am). + Can specify values for each derivative level as a semicolon-separated string (default: (max_am/2)+1)" -1) + +option_with_default(WITH_ERI3_MAX_AM + "Support 3-center ERIs for Gaussians of angular momentum up to N. + Can specify values for each derivative level as a semicolon-separated string. (default: max_am) + Set WITH_MAX_AM to mirror this option." -1) +option_with_default(WITH_ERI3_OPT_AM + "Optimize 3-center ERIs maximally for up to angular momentum N (N <= max-am). + Can specify values for each derivative level as a semicolon-separated string. (default: (max_am/2)+1)" -1) + +option_with_default(WITH_ERI2_MAX_AM + "Support 2-center ERIs for Gaussians of angular momentum up to N. + Can specify values for each derivative level as a semicolon-separated string. (default: max_am)" -1) +option_with_default(WITH_ERI2_OPT_AM + "Optimize 2-center ERIs maximally for up to angular momentum N (N <= max-am). + Can specify values for each derivative level as a semicolon-separated string. (default: (max_am/2)+1)" -1) + +option_with_default(WITH_G12_MAX_AM + "Support integrals for G12 methods of angular momentum up to N. (default: max_am)" -1) +option_with_default(WITH_G12_OPT_AM + "Optimize G12 integrals for up to angular momentum N (N <= max-am). (default: (max_am/2)+1)" -1) + +option_with_default(WITH_G12DKH_MAX_AM + "Support integrals for relativistic G12 methods of angular momentum up to N. (default: max_am)" -1) +option_with_default(WITH_G12DKH_OPT_AM + "Optimize G12DKH integrals for up to angular momentum N (N <= max-am). (default: (max_am/2)+1)" -1) + +# <<< Miscellaneous >>> + +option_with_print(LIBINT_CONTRACTED_INTS + "Turn on support for contracted integrals." ON) +option_with_default(LIBINT_ERI_STRATEGY + "Compute ERIs using the following strategy. This option is for experts ONLY." 1) +option_with_print(LIBINT_USE_COMPOSITE_EVALUATORS + "Libint will use composite evaluators (i.e. every evaluator will compute one integral type only)" ON) +option_with_print(LIBINT_SINGLE_EVALTYPE + "Generate single evaluator type (i.e. all tasks use the same evaluator)" ON) +option_with_default(LIBINT_ENABLE_UNROLLING + "Unroll shell sets into integrals (will unroll shell sets larger than N) (no->0, yes->1000000000)" 100) +option_with_default(LIBINT_ALIGN_SIZE + "(EXPERT) if posix_memalign is available, this will specify alignment of Libint data, in units of + sizeof(LIBINT2_REALTYPE). Default is to use built-in heuristics. LAB: LIBINT for bin, LIBINT2 for lib?" 0) +option_with_default(LIBINT2_REALTYPE "Specifies the floating-point data type used by the library. Consumed at library build-time." double) +option_with_print(LIBINT_GENERATE_FMA + "Generate FMA (fused multiply-add) instructions (to benefit must have FMA-capable hardware and compiler)" OFF) +option_with_print(LIBINT_ENABLE_GENERIC_CODE + "Use manually-written generic code" OFF) +option_with_print(ENABLE_XHOST "Enable processor-specific optimization (with MSVC, it enables AVX2 instructions). Consumed at library build-time." ON) +option_with_print(ENABLE_MPFR "Use GNU MPFR library for high-precision testing (EXPERTS ONLY). Consumed at library build-time." OFF) +# next one defined by `include(CTest)` +message(STATUS "Showing option BUILD_TESTING: ${BUILD_TESTING}") + +# <<< Path >>> + +# * only relevant to library +# * use GNUInstallDirs defaults, but define others for CMake and basis files +# * LIBINT2_ dirs are STRING, not PATH, to preserve relative paths + +# next four defined by `include(GNUInstallDirs)` +message(STATUS "Showing option CMAKE_INSTALL_BINDIR: ${CMAKE_INSTALL_BINDIR}") +message(STATUS "Showing option CMAKE_INSTALL_LIBDIR: ${CMAKE_INSTALL_LIBDIR}") +message(STATUS "Showing option CMAKE_INSTALL_INCLUDEDIR: ${CMAKE_INSTALL_INCLUDEDIR}") +message(STATUS "Showing option CMAKE_INSTALL_DATADIR: ${CMAKE_INSTALL_DATADIR}") +set(LIBINT2_INSTALL_CMAKEDIR "${CMAKE_INSTALL_LIBDIR}/cmake/${pnv}" + CACHE STRING "Directory to which CMake files are installed") +message(STATUS "Showing option LIBINT2_INSTALL_CMAKEDIR: ${LIBINT2_INSTALL_CMAKEDIR}") +set(LIBINT2_INSTALL_BASISDIR "${CMAKE_INSTALL_DATADIR}/libint/${LIBINT_VERSION}" + CACHE STRING "Directory to which data files are installed. basis/ directory created within") +message(STATUS "Showing option LIBINT2_INSTALL_BASISDIR: ${LIBINT2_INSTALL_BASISDIR}") + +#CONFIGURE --enable-accum-ints Accumulate integrals to the buffer, rather than +#CONFIGURE copy. +#CONFIGURE --enable-flop-counter Support (approximate) FLOP counting by the library. +#CONFIGURE CXXGEN must support C++11! +#CONFIGURE --enable-profile Turn on profiling instrumentation of the library. +#CONFIGURE CXXGEN must support C++11! +#CONFIGURE +#CONFIGURE Optional Packages: +#CONFIGURE --with-api-prefix Prepend this string to every name in the library API +#CONFIGURE (except for the types). +#CONFIGURE --with-vector-length=N Compute integrals in vectors of length N. +#CONFIGURE --with-vector-method Specifies how to vectorize integrals. Allowed values +#CONFIGURE are 'block' (default), and 'line'. +#CONFIGURE --with-build-id Gives an identifier for the build. +#CONFIGURE --with-libint-exportdir Specifies export directory name. Default is +#CONFIGURE libint-. +#CONFIGURE --with-pkgconfigdir Specifies the location to put pkg-config's data +#CONFIGURE file. Default is $(libdir)/pkgconfig. +#CONFIGURE --with-real-type-includes LIBINT_USER_DEFINED_REAL_INCLUDES +#CONFIGURE Additional includes necessary to use the real type +#CONFIGURE (default: none). + +######################## Process & Validate Options ########################### +include(autocmake_safeguards) +include(CheckFunctionExists) +include(int_orderings) +include(int_am) + +check_function_exists(posix_memalign HAVE_POSIX_MEMALIGN) +if (HAVE_POSIX_MEMALIGN) + set(LIBINT2_ALIGN_SIZE "0" CACHE STRING "(EXPERT) if posix_memalign is available, this will specify alignment of Libint data, in units of sizeof(LIBINT2_REALTYPE). Default is to use built-in heuristics") +endif() + +# C++11 required for now. enforced in targets +set(LIBINT_HAS_CXX11 1) +set(LIBINT_USE_TYPE_TRAITS 1) +set(LIBINT_USE_MEMORY 1) +set(LIBINT_USE_ARRAY 1) +set(LIBINT_HAS_STD_TYPE_TRAITS 1) +set(LIBINT_HAS_STD_SHARED_PTR 1) +set(LIBINT_HAS_STD_MAKE_SHARED 1) +set(LIBINT_HAS_STD_ARRAY 1) +set(LIBINT_ARRAY_HAS_FILL 1) + +find_package(Boost 1.57 REQUIRED) +if (TARGET Boost::headers) + set(LIBINT_HAS_SYSTEM_BOOST_PREPROCESSOR_VARIADICS 1) +endif() + +unset(_temp_h CACHE) +find_path(_temp_h NAMES stdint.h) +if(_temp_h) + set(HAVE_STDINT_H 1) +endif() + +booleanize01(ERI3_PURE_SH) +booleanize01(ERI2_PURE_SH) +booleanize01(LIBINT_SINGLE_EVALTYPE) +booleanize01(LIBINT_USE_COMPOSITE_EVALUATORS) +booleanize01(LIBINT_CONTRACTED_INTS) +booleanize01(DISABLE_ONEBODY_PROPERTY_DERIVS) +booleanize01(LIBINT_GENERATE_FMA) +booleanize01(LIBINT_ENABLE_GENERIC_CODE) +booleanize01(SUPPORT_T1G12) + +################################# Main Project ################################# +set(EXPORT_STAGE_DIR ${PROJECT_BINARY_DIR}/libint-${LIBINT_EXT_VERSION}) +set(STAGED_INSTALL_PREFIX "${PROJECT_BINARY_DIR}/library-install-stage") + +configure_file(cmake/modules/int_computed.cmake.in cmake/modules/int_computed.cmake @ONLY) +set(_EXPORT_MODE 0) +configure_file(include/libint2/config.h.cmake.in include/libint2/config.h @ONLY) +set(_EXPORT_MODE 1) +configure_file(include/libint2/config.h.cmake.in ${EXPORT_STAGE_DIR}/include/libint2/config.h @ONLY) +configure_file(include/libint2/config2.h.cmake.in ${EXPORT_STAGE_DIR}/include/libint2/config2.h.cmake.in COPYONLY) + +add_subdirectory(src) + +add_subdirectory(doc) + +if (BUILD_TESTING) + add_subdirectory(tests) +endif() diff --git a/INSTALL b/INSTALL deleted file mode 100644 index 1445e76be..000000000 --- a/INSTALL +++ /dev/null @@ -1,44 +0,0 @@ -For (more) complete instructions please refer to https://github.com/evaleev/libint/wiki - -The installation procedure for the impatient and/or experts: -0) create configure in the source directory: - $ ./autogen.sh -1) create a directory for object files (you cannot build in the source directory): - $ mkdir ../build; cd ../build -2) configure the package: - $ ../src_dir/configure [--with-boost=$BOOST_ROOT] - Most often you will need to specify command-line options to configure. - To obtain a list of configure options run 'configure --help'. - -then either choose path a or b: - -3a) build the Libint compiler, then generate and compile a library: - $ make -4a) optional validation of the library: - $ make check -5a) install the compiled library: - $ make install - -3b) build the Libint compiler, then generate and package a library for redistribution - $ make export - this produces a tarball with a Libint library that can be unpacked, configured, and compiled elsewhere. - -Building the Python module ---------------------------- -Configure libint (Step 2) with `--enable-eri2 --enable-eri3`, export (Step 3b), untar exported archive: - $ cmake -DPYTHON_EXECUTABLE=`which python3` -DLIBINT2_PYTHON=ON -DCMAKE_PREFIX_PATH=$EIGEN_INSTALL_PATH -DCMAKE_INSTALL_PREFIX= . - $ cd python - $ make - $ cd .. && make install - - $ cd python - -Run tests: - $ pip3 install numpy scipy wheel requests - $ make test - -To install the python module: - $ make libint2-python-wheel - $ pip3 install dist/libint2-*.whl - -To uninstall: pip3 uninstall libint2 diff --git a/INSTALL.md b/INSTALL.md new file mode 100644 index 000000000..7c42d1618 --- /dev/null +++ b/INSTALL.md @@ -0,0 +1,596 @@ +# Libint Compiler vs Library + +Before you read on: + +* If you want a pre-built libint library, packages may be available: + * conda-forge (TBD) + * Debian (TBD) + * Fedora (TBD) +* If you want to know how to _use_ a libint library in your code: + * if you use C++11 or later (strongly recommended): read [this](https://github.com/evaleev/libint/wiki/using-modern-CPlusPlus-API) instead + * if you use pre-2011 C++, C, Fortran, or any other language, refer to the [Libint Programmer's Manual](http://sourceforge.net/projects/libint/files/libint-for-beginners/progman.pdf/download) +* If you want to _build and use_ a libint _library_: + * if all you want is a basic library that computes integrals necessary to compute energies, use the pre-generated library labeled "lmax=6 library (standard ints only)" from the [latest release](https://github.com/evaleev/libint/releases/latest) of Libint + * many codes using libint, e.g. orca and mpqc, already include an appropriately configured libint library, and you do not need to generate it yourself + * if you need compilation directions, _read on_, skipping the compiler/generation parts. +* If you want to know how to _generate_ a libint _library_ using the libint _compiler_, these are some compelling circumstances: + * if you need a custom libint library with choice of integral types, AM, orderings, language interfaces, etc. + * if you want to develop libint with new integral types, recurrence relations, and computation + strategies, you'll need to edit the compiler. If you are interested in working on the compiler + code please consider consulting with one of the Libint authors to avoid duplication of effort. + * if you do need to generate a custom library, _read on_. + + +----------------------------------------------------------------------------- + +# Overview + +The Libint build is structured into three parts: + +* generator/compiler + - (1) build src/bin/libint/ into compiler executable `build_libint` + - pretty quick, runs in parallel + - consumes all the enable/max/opt integral options and all orderings options except solid harmonic + - (2) optionally testable +* export + - (3) run `build_libint` to generate library source (C++) files (that upon + compilation can become a Libint2 library) and combine them with other + static source files in src/lib/libint/ and general static files (e.g., + include/ and docs/) into an independent tarball ready for distribution + (with its own CMake configuration, tests, etc.). + - really slow for non-trivial angular momenta, runs in serial + - consumes no options + - build target `export` to stop after this step and collect source tarball +* library + - can be built as a subproject (FetchContent) or completely insulated (bare ExternalProject; default). + For FetchContent, must build libint-library-export target before library build targets appear + - (4) unpack the export tarball and build the library and install into \/library-install-stage/ + - duration depends on number of integrals requested, runs in parallel + - consumes solid harmonic ordering and the CMAKE_INSTALL_[DATA|INCLUDE|LIB]DIR + - the default build target includes this final library build + - (5) optionally testable + - (6) install into CMAKE_INSTALL_PREFIX + + +Command-line synopsis. See [table](#Build-Targets) for `--target` choices (steps refer to numbered bullets above) and [section](#Configuring-Libint) for `-D options` choices. + +```bash +>>> git clone https://github.com/evaleev/libint.git && cd libint +>>> ls +cmake/ COPYING src/ tests/ ... +>>> cmake -S. -Bbuild -GNinja -DCMAKE_INSTALL_PREFIX=/path/to/future/install-libint -D options ... +... +-- Generating done +-- Build files have been written to: /current/dir/build +>>> cmake --build build --target install -j`getconf _NPROCESSORS_ONLN` +``` + +### Build Targets + +| `--target ...` | incl. | steps | ( | see | above | ) | +| -------------- | ----- | ----- | ----- | ----- | ----- | ----- | +| `build_libint` | 1 | - | - | - | - | - | +| `check-libint2compiler` | 1 | 2 | - | - | - | - | +| `export` | 1 | - | 3 | - | - | - | +| `library` (default) | 1 | - | 3 | 4 | - | - | +| `check` | 1 | 2 | 3 | 4 | 5 | - | +| `install` | 1 | - | 3 | 4 | - | 6 | +| `check install` | 1 | 2 | 3 | 4 | 5 | 6 | + +Use combined targets like `cmake --target check install` to avoid some unnecessary rebuilding (esp. of build_libint) that occurs with successive targets. The CMake dependency structure is imperfect. + + +----------------------------------------------------------------------------- + +# Prerequisites + +| Task | Compilers | CMake[^3] | CMake generator[^20] | Py | Boost[^7] | Eigen | GMPXX[^13] | MPFR[^14] | +| :------------------------------------------------------------------- | :---------------------: | :-------: | -------------------- | :-----: | :-------: | :-----: | :--------: | :-------: | +| build target `build_libint` | C++[^1] | 🔵[^4] | Ninja | – | 🔵[^8] | – | 🔵 | – | +| build target `library` | C++[^1], C | 🔵[^5] | Ninja | 🔸[^21] | – | – | – | – | +|   `-D REQUIRE_CXX_API=ON` | C++[^1], C | 🔵[^5] | Ninja | 🔸[^21] | 🔸[^9] | 🔵[^11] | – | – | +|   `-D ENABLE_FORTRAN=ON` | C++[^1], Fortran[^2], C | 🔵[^5] | Ninja | 🔵[^22] | – | – | – | – | +| build project _consuming_ Libint2 library | +|  C interface (I/F), `Libint2::int2` | C++[^1] | 🔸[^6] | Ninja, Makefile | – | – | – | – | – | +|  C++11 header I/F, `Libint2::cxx` | C++[^1] | 🔸[^6] | Ninja, Makefile | – | 🔸[^10] | 🔵 | – | – | +|   `-D ENABLE_MPFR=ON` | C++[^1] | 🔸[^6] | Ninja, Makefile | – | 🔸[^10] | 🔵 | 🔵 | 🔵 | +|  C++11 compiled I/F, `int2-cxx` | C++[^1] | 🔸[^6] | Ninja, Makefile | – | 🔸[^10] | 🔵[^12] | – | – | +|  Fortran I/F, `Libint2::fortran` | Fortran[^2] | 🔸[^6] | Ninja, Makefile | – | | | – | – | + +* `🔵` required +* `🔸` required or recommended, but there's a path forward without +* `—` not involved + +[^1]: C++ compiler that supports C++11 standard. C++11 standard is the fourth most recent international standard for C++, hence most modern compilers support it fully. A common compiler flag is `-std=c++11`, which CMake will impose on the compilation. + +[^2]: Fortran 2003 compiler to enable Fortran bindings generation. + +[^3]: [CMake](https://cmake.org/) 3.16 or higher. + +[^4]: Since Libint2 v2.8 TODO, the GNU toolchain has been replaced by CMake as the sole buildsystem for the Libint2 compiler, `build_libint`. See [update guide](#GNU-Autotools-Update-Guide). + +[^5]: Since Libint2 v2.8 TODO, the CMake buildsystem for the exported library has been reworked. See [update guide](#GNU-Autotools-Update-Guide). + +[^6]: Consuming an installed Libint2 library is simplest with CMake by employing `find_package(Libint2)` and `target_link_libraries(... Libint2::...)` commands. To facilitate consumption outside CMake, pkgconfig files are available for the C interface, and more could be provided. + +[^7]: [Boost](https://www.boost.org/) 1.57 or higher. Only header-only (no compiled libraries) components needed. + +[^8]: Building the Libint2 compiler needs several Boost components including MPL, Type Traits, and Preprocessor. A detectable system installation is required. + +[^9]: Building the Libint2 library with C++11 API needs the Boost Preprocessor (PP) component. For the compiled C++11 interface, `Libint2::int2-cxx`, the PP is actually compiled against, but for the header-only target, `Libint2::cxx`, the PP only sets up the usage dependency. A system installation of Boost is sought, but if none suitable found, a bundled version of PP is installed within the Libint2 header namespace. + +[^10]: Consuming an installed Libint2 library through a C++11 interface requires the Boost Preprocessor (PP) component. Depending on the library *build* environment, a copy may have been bundled/vendored with the install at `CMAKE_INSTALL_PREFIX/CMAKE_INSTALL_INCLUDEDIR/libint2/boost/`. + +[^11]: Building the Libint2 library with C++11 API needs the header-only [Eigen](https://eigen.tuxfamily.org/) library. For the compiled C++11 interface, `Libint2::cxx`, Eigen is actually compiled against, but for the header-only target `Libint2::cxx_ho`, Eigen only sets up the usage dependency. A detectable (either through Eigen3Config.cmake or through location-hinting) system installation is required. + +[^12]: Consuming an installed Libint2 library through the compiled C++11 interface, `Libint2::int2-cxx` requires [Eigen](https://eigen.tuxfamily.org/). It is *strongly* recommended that the same installation of Eigen be used both to build and consume the `Libint2::int2-cxx` target, especially as regards configuring BLAS and other backends. + +[^13]: Building the Libint2 compiler or building the Libint2 library with `-D ENABLE_MPFR=ON` for high-precision testing requires the [GNU Multiple Precision (GMP)](https://gmplib.org/) library. A detectable system installation is required, and it must include C++ support. For Windows, the [MPIR](https://www.mpir.org) project satisfies the requirement. + +[^14]: Building against the Libint2 library for the purpose of high-precision testing with define `LIBINT_HAS_MPFR=1` requires the [MPFR](https://www.mpfr.org/) library. A detectable system installation is required. + +[^20]: Tested CMake generators are [Ninja](https://ninja-build.org/) or [GNU Make](https://www.gnu.org/software/make/). The use of Ninja is **strongly** recommended! + +[^21]: Python used for testing. + +[^22]: Python used to process files for Fortran binding. + + +----------------------------------------------------------------------------- + +# Configuring Libint + +* Notes + * Codes "G", "L", or "C" for each option indicate whether it is consumed by the _g_enerator, the _l_ibrary, the library _c_onsumer, or a combination. + * If your final target is the export tarball, use options that include the letter "G". + * If you're building a library from an export tarball, use options that include the letter "L". + * For a continuous generator->export->library build, options supplied at the top level will be properly handed off to generator and library build. + + +### Which Integrals Classes, Which Derivative Levels + +* `ENABLE_ONEBODY` — G — Compile with support for up to N-th derivatives of 1-body integrals. Use -1 for OFF. [Default=0] +* `ENABLE_ERI` — G — Compile with support for up to N-th derivatives of 4-center electron repulsion integrals. Use -1 for OFF. [Default=0] +* `ENABLE_ERI3` — G — Compile with support for up to N-th derivatives of 3-center electron repulsion integrals. Use -1 for OFF. [Default=-1] +* `ENABLE_ERI2` — G — Compile with support for up to N-th derivatives of 2-center electron repulsion integrals. Use -1 for OFF. [Default=-1] +* `ENABLE_G12` — G — Compile with support for N-th derivatives of MP2-F12 energies with Gaussian factors. Use -1 for OFF. [Default=-1] +* `ENABLE_G12DKH` — G — Compile with support for N-th derivatives of DKH-MP2-F12 energies with Gaussian factors. Use -1 for OFF. [Default=-1] + +* `DISABLE_ONEBODY_PROPERTY_DERIVS` — G — Disable geometric derivatives of 1-body property integrals (all but overlap, kinetic, elecpot). + These derivatives are disabled by default to save compile time. Use OFF to enable. [Default=ON] + +* `ENABLE_T1G12_SUPPORT` — G — Enable [Ti,G12] integrals when G12 integrals are enabled. Irrelevant when `ENABLE_G12=OFF`. Use OFF to disable. [Default=ON] + + +### Which Ordering Conventions + +* `LIBINT2_SHGAUSS_ORDERING` — L — Ordering for shells of solid harmonic Gaussians. [Default=standard] + * `standard` — standard ordering (-l, -l+1 ... l) + * `gaussian` — the Gaussian ordering (0, 1, -1, 2, -2, ... l, -l) +* `LIBINT2_CARTGAUSS_ORDERING` — G — Orderings for shells of cartesian Gaussians. [Default=standard] + * `standard` — standard ordering (xxx, xxy, xxz, xyy, xyz, xzz, yyy, ...) This is ordering of the Common Component Architecture (CCA) standard for molecular integral data exchange described in ["Components for Integral Evaluation in Quantum Chemistry", J. P. Kenny, C. L. Janssen, E. F. Valeev, and T. L. Windus, J. Comp. Chem. 29, 562 (2008)](http://dx.doi.org/10.1002/jcc.20815). + * `intv3` — intv3 ordering (yyy, yyz, yzz, zzz, xyy, xyz, xzz, xxy, xxz, xxx) This is used by IntV3, the default integral engine of [MPQC](https://github.com/evaleev/libint/wiki/www.mpqc.org). Use this to make Libint and IntV3 engines in MPQC interoperable. + * `gamess` — [GAMESS](http://www.msg.ameslab.gov/gamess/) ordering (xxx, yyy, zzz, xxy, xxz, yyx, yyz, zzx, zzy, xyz) + * `orca` — [ORCA](http://cec.mpg.de/forum/) ordering (hydrid between GAMESS and standard) + * `bagel` — [BAGEL](https://github.com/evaleev/libint/wiki/nubakery.org) axis-permuted version of intv3 (xxx, xxy, xyy, yyy, xxz, xyz, yyz, xzz, yzz, zzz) +* `LIBINT2_SHELL_SET` — G — Support computation of shell sets sets subject to these restrictions. [Default=standard] + * `standard` — standard ordering: + for (ab|cd): + l(a) >= l(b), + l(c) >= l(d), + l(a)+l(b) <= l(c)+l(d) + for (b|cd): + l(c) >= l(d) + * `orca` — ORCA ordering: + for (ab|cd): + l(a) <= l(b), + l(c) <= l(d), + l(a) < l(c) || (l(a) == l(c) && l(b) < l(d)) + for (b|cd): + l(c) <= l(d) +* `ERI3_PURE_SH` — G — Assume the 'unpaired' center of 3-center ERIs will be transformed to pure solid harmonics. [Default=OFF] +* `ERI2_PURE_SH` — G — Assume the 2-center ERIs will be transformed to pure solid harmonics. [Default=OFF] + + +### How High Angular Momentum + +* Notes + * example for "semicolon-separated string": `-DENABLE_ERI3=2 -DWITH_ERI3_MAX_AM="5;4;3"`. cmake configuration prints: + + ``` + -- Setting option ENABLE_ERI3: 2 + -- Setting option WITH_ERI3_MAX_AM: 5;4;3 + ``` + + * high MAX_AM generating >20k files may require `ulimit -s 65535` for linking library target on Linux to avert "ld: Argument list too long". Unity build likely averts this. + +* `WITH_MAX_AM` — G — Support Gaussians of angular momentum up to N. Can specify values for each derivative level as a semicolon-separated string. Specify values greater or equal to `WITH__MAX_AM`; often mirrors `WITH_ERI3_MAX_AM`. [Default=4] +* `WITH_OPT_AM` — G — Optimize maximally for up to angular momentum N (N <= WITH_MAX_AM). Can specify values for each derivative level as a semicolon-separated string. [Default=-1 -> `(WITH_MAX_AM/2)+1`] + +* `MULTIPOLE_MAX_ORDER` — G — Maximum order of spherical multipole integrals. There is no maximum. [Default=4] + +* `WITH_ONEBODY_MAX_AM` — G — Support 1-body ints for Gaussians of angular momentum up to N. Can specify values for each derivative level as a semicolon-separated string. [Default=-1 -> `WITH_MAX_AM`] +* `WITH_ONEBODY_OPT_AM` — G — Optimize 1-body ints maximally for up to angular momentum N (N <= max-am). Can specify values for each derivative level as a semicolon-separated string. [Default=-1 -> `WITH_OPT_AM`] + +* `WITH_ERI_MAX_AM` — G — Support 4-center ERIs for Gaussians of angular momentum up to N. Can specify values for each derivative level as a semicolon-separated string. [Default=-1 -> `WITH_MAX_AM`] +* `WITH_ERI_OPT_AM` — G — Optimize 4-center ERIs maximally for up to angular momentum N (N <= max-am). Can specify values for each derivative level as a semicolon-separated string. [Default=-1 -> `WITH_OPT_AM`] + +* `WITH_ERI3_MAX_AM` — G — Support 3-center ERIs for Gaussians of angular momentum up to N. Can specify values for each derivative level as a semicolon-separated string. [Default=-1 -> `WITH_MAX_AM`] +* `WITH_ERI3_OPT_AM` — G — Optimize 3-center ERIs maximally for up to angular momentum N (N <= max-am). Can specify values for each derivative level as a semicolon-separated string. [Default=-1 -> `WITH_OPT_AM`] + +* `WITH_ERI2_MAX_AM` — G — Support 2-center ERIs for Gaussians of angular momentum up to N. Can specify values for each derivative level as a semicolon-separated string. [Default=-1 -> `WITH_MAX_AM`] +* `WITH_ERI2_OPT_AM` — G — Optimize 2-center ERIs maximally for up to angular momentum N (N <= max-am). Can specify values for each derivative level as a semicolon-separated string. [Default=-1 -> `WITH_OPT_AM`] + +* `WITH_G12_MAX_AM` — G — Support integrals for G12 methods of angular momentum up to N. No specification with per-derivative list. [Default=-1 -> `WITH_MAX_AM`] +* `WITH_G12_OPT_AM` — G — Optimize G12 integrals for up to angular momentum N (N <= max-am). No specification with per-derivative list. [Default=-1 `WITH_OPT_AM`] + +* `WITH_G12DKH_MAX_AM` — G — Support integrals for relativistic G12 methods of angular momentum up to N. No specification with per-derivative list. [Default=-1 -> `WITH_MAX_AM`] +* `WITH_G12DKH_OPT_AM` — G — Optimize G12DKH integrals for up to angular momentum N (N <= max-am). No specification with per-derivative list. [Default=-1 `WITH_OPT_AM`] + + +### Compilers and Flags + +* `CMAKE_CXX_COMPILER` — G L — Specify C++ Compiler. [Standard CMake variable](https://cmake.org/cmake/help/latest/variable/CMAKE_LANG_COMPILER.html) +* `CMAKE_C_COMPILER` — G L — Specify C Compiler. [Standard CMake variable](https://cmake.org/cmake/help/latest/variable/CMAKE_LANG_COMPILER.html) +* `CMAKE_Fortran_COMPILER` — G L — Specify Fortran Compiler. [Standard CMake variable](https://cmake.org/cmake/help/latest/variable/CMAKE_LANG_COMPILER.html) +* `CMAKE_CXX_FLAGS` — G L — Additional C++ flags. [Standard CMake variable](https://cmake.org/cmake/help/latest/variable/CMAKE_LANG_FLAGS.html) +* `CMAKE_C_FLAGS` — G L — Additional C flags. [Standard CMake variable](https://cmake.org/cmake/help/latest/variable/CMAKE_LANG_FLAGS.html) +* `CMAKE_Fortran_FLAGS` — G L — Additional Fortran flags. [Standard CMake variable](https://cmake.org/cmake/help/latest/variable/CMAKE_LANG_FLAGS.html) + + +### Install Paths + +* Notes + * Approximate defaults are shown. Actual defaults from [GNUInstallDirs](https://cmake.org/cmake/help/latest/module/GNUInstallDirs.html) + +* `CMAKE_INSTALL_PREFIX` — L — Directory into which library installed. [Standard CMake variable](https://cmake.org/cmake/help/latest/variable/CMAKE_INSTALL_PREFIX.html) +* `CMAKE_INSTALL_BINDIR` — L — Directory within `CMAKE_INSTALL_PREFIX` to which executables and runtime libraries are installed. [Standard CMake variable](https://cmake.org/cmake/help/latest/module/GNUInstallDirs.html) [Default=bin] +* `CMAKE_INSTALL_LIBDIR` — L — Directory within `CMAKE_INSTALL_PREFIX` to which libraries are installed. [Standard CMake variable](https://cmake.org/cmake/help/latest/module/GNUInstallDirs.html) [Default=lib] +* `CMAKE_INSTALL_INCLUDEDIR` — L — Directory within `CMAKE_INSTALL_PREFIX` to which headers are installed. [Standard CMake variable](https://cmake.org/cmake/help/latest/module/GNUInstallDirs.html) [Default=include] +* `CMAKE_INSTALL_DATADIR` — L — Directory within `CMAKE_INSTALL_PREFIX` to which data files are installed. [Standard CMake variable](https://cmake.org/cmake/help/latest/module/GNUInstallDirs.html) [Default=share] +* `LIBINT2_INSTALL_CMAKEDIR` — L — Directory within `CMAKE_INSTALL_PREFIX` to which CMake files are installed. [Default=lib/cmake/libint2] +* `LIBINT2_INSTALL_BASISDIR` — L — Directory within `CMAKE_INSTALL_PREFIX` to which data (basis) files are installed. basis/ directory created within this. [Default=share/libint/] +* `LIBINT2_INSTALL_FMODDIR` — L — Directory within `CMAKE_INSTALL_PREFIX` to which Fortran module files are installed if `ENABLE_FORTRAN=ON`. [Default=include/libint2/fortran2/modules] + + +### Detecting Dependencies + +* `Python_EXECUTABLE` — L — Path to Python interpreter. +* `CMAKE_PREFIX_PATH` — G L — Set to list of root directories to look for external dependencies. [Standard CMake variable](https://cmake.org/cmake/help/latest/variable/CMAKE_PREFIX_PATH.html) +* `BOOST_ROOT` — G L C — +* `Multiprecision_ROOT` — G L — +* `Eigen3_ROOT` — L C — Prefix to installation location (`Eigen3_ROOT/...` exists) +* `Libint2_DIR` — C — CMake variable, set to directory containing this Config file +* `LIBINT_LOCAL_Eigen3_FIND` — C — Set to `ON` before `find_package(Libint2)` to load the Eigen3 target exported by `LIBINT_LOCAL_Eigen3_INSTALL=ON` if Libint library built locally. [Default=OFF] + +EIGEN3_INCLUDE_DIR? + +* Hint dependency locations all at the same installation prefix: + + ``` + -D CMAKE_PREFIX_PATH="/path/to/installation/prefix" + -D CMAKE_PREFIX_PATH="/home/miniconda/envs/l2dev" + ``` + +* Hint dependency locations all at different installation prefixes: + + ``` + -D CMAKE_PREFIX_PATH="/home/miniconda/envs/onlyboost;/home/miniconda/envs/onlygmp;/home/miniconda/envs/onlyeigen" + ``` + +* Hint dependency locations targeted by package: + + ``` + -D BOOST_ROOT="/home/miniconda/envs/onlyboost" + -D Multiprecision_ROOT="/home/miniconda/envs/onlygmp" + -D Eigen3_ROOT="/home/miniconda/envs/onlyeigen" + ``` + +* Hint dependency locations targeted by Config.cmake (most CMake-like): + + ``` + -D Eigen3_DIR="/home/miniconda/envs/onlyeigen/share/eigen3/cmake" + -D Boost_DIR="/home/miniconda/envs/onlyboost/lib/cmake/Boost-1.73.0" + ``` + +* Hint dependency locations targeted by package variables (least CMake-like): UNTESTED + + ``` + ``` + + +### Build Library What + +* `REQUIRE_CXX_API` — L — Build C++11 Libint API. Define header-only library target and check target (requires Eigen3; Boost recommended). [Default=ON] +* `REQUIRE_CXX_API_COMPILED` — L — Build C++11 Libint API. Define compiled (not just header-only) targets (requires Eigen3; Boost recommended). [Default=ON] +* `ENABLE_FORTRAN` — L — Build Fortran03+ module/bindings (requires C and Fortran compilers and Python). [Default=OFF] +* `ENABLE_MPFR` — L — Use MPFR library to test Libint integrals in high precision (requires MPFR; experts only). [Default=OFF] +* `LIBINT_LOCAL_Eigen3_INSTALL` — L — Install an exported target with hard-coded Eigen3 dependency paths. This is potentially useful and important when consuming the compiled C++11 interface library so that the Libint library build and Libint consumer build use the same Eigen3 installation & ABI. This is at most a convenience when consuming the header-only C++11 interface library. See `LIBINT_LOCAL_Eigen3_FIND`. [Default=OFF] + + +### Build Library How + +* `CMAKE_BUILD_TYPE` — G L — [Standard CMake variable](https://cmake.org/cmake/help/latest/variable/CMAKE_BUILD_TYPE.html) [Default=Release] +* `BUILD_SHARED_LIBS` — L — Build Libint library as shared, not static. [Standard CMake variable](https://cmake.org/cmake/help/latest/variable/BUILD_SHARED_LIBS.html) [Default=OFF] +* `LIBINT2_BUILD_SHARED_AND_STATIC_LIBS` — L — Build both shared and static Libint libraries in one shot. Uses `-fPIC`. [Default=OFF] +* `ENABLE_XHOST` — L — Enables processor-specific optimization (with MSVC, it enables AVX2 instructions) [Default=ON] +* `BUILD_TESTING` — G L — Whether to build the testing infrastructure and define the `check` target. [Standard CMake variable](https://cmake.org/cmake/help/latest/command/enable_testing.html) [Default=ON] +* `LIBINT_BUILD_LIBRARY_AS_SUBPROJECT` — G — If building compiler and library in continuous command, build generated library as a subproject; if OFF will configure and build separately (expert only). [Default=OFF] + + +### Miscellaneous + +* `LIBINT2_REALTYPE` — L — Specifies the floating-point data type used by the library. [Default=double] + By overriding the default it is possible to customize the library to use a lower-precision representation (which typically results in a performance boost) and/or to generate [SIMD](http://en.wikipedia.org/wiki/SIMD) vectorized code. *N.B. C++11 interface cannot be currently used with SIMD vectorized libraries!* The following values are valid: + * `double` -- double-precision floating-point representation of a real number; + * `float` -- single-precision floating-point number; + * `libint2::simd::VectorAVXDouble` -- vector of 4 packed doubles that can be used with [AVX](http://en.wikipedia.org/wiki/Advanced_Vector_Extensions) instructions available on reasonably-modern x86 hardware (starting with Intel Sandy Bridge and AMD Bulldozer microarchitectures, available in processors since 2011); + * `libint2::simd::VectorSSEDouble` -- vector of 2 packed doubles that can be used with [SSE2](http://en.wikipedia.org/wiki/SSE2) instructions available on all x86 platforms, including those released before 2011; + * `libint2::simd::VectorSSEFloat` -- vector of 4 packed floats that can be used with [SSE](http://en.wikipedia.org/wiki/Streaming_SIMD_Extensions) instructions available on all x86 platforms, including those released before 2011; + * `libint2::simd::VectorQPXDouble` -- vector of 4 packed doubles that can be used with QPX instructions available on recent PowerPC hardware (IBM Blue Gene/Q); + * `libint2::simd::VectorFP2Double` -- vector of 2 packed doubles that can be used with FP2 (Double Hummer) instructions available on older PowerPC hardware (IBM Blue Gene/P). + + With the exception of `float`, these are vector types implemented in Libint using compiler _intrinsics_, functions that translate directly into vector instructions. To use these vector types you may need to provide additional compiler flags that will enable support for vector instructions. For example, to enable support for AVX in Clang use the `-mavx` compiler flag. With Intel compiler use flag `-xHOST` to enable all vector instruction sets supported by the processor on which you are compiling. + + **N.B.** It is also possible to use real vector types of [Agner Fog's vectorclass library](http://www.agner.org/optimize/#vectorclass), e.g. `Vec4d` and `Vec8f` for AVX. To use this library you need to add this to CPPFLAGS or CXXFLAGS: `-Ipath_to_vectorclass -DLIBINT2_HAVE_AGNER_VECTORCLASS` . On macOS, we only succeeded in using this library with a recent GNU C++ compiler, not with Clang. Not tested after CMake rework. + +* `LIBINT_CONTRACTED_INTS` — G — Turn on support for contracted integrals. [Default=ON] +* `LIBINT_ERI_STRATEGY` — G — Compute ERIs using the following strategy (experts only). [Default=1] +* `LIBINT_USE_COMPOSITE_EVALUATORS` — G — Libint will use composite evaluators (i.e. every evaluator will compute one integral type only). [Default=ON] +* `LIBINT_SINGLE_EVALTYPE` — G — Generate single evaluator type (i.e. all tasks use the same evaluator). [Default=ON] +* `LIBINT_ENABLE_UNROLLING` — G — Unroll shell sets into integrals (will unroll shell sets larger than N) (no->0, yes->1000000000). [Default=100] +* `LIBINT_ALIGN_SIZE` — G — If posix_memalign is available, this will specify alignment of Libint data, in units of sizeof(LIBINT2_REALTYPE). Default is to use built-in heuristics (experts only). [Default=0] +* `LIBINT_GENERATE_FMA` — G — Generate FMA (fused multiply-add) instructions (to benefit must have FMA-capable hardware and compiler). [Default=OFF] +* `LIBINT_ENABLE_GENERIC_CODE` — G — Use manually-written generic code. [Default=OFF] + + +----------------------------------------------------------------------------- + +# GNU Autotools Update Guide + +* Notes + * When three option names present, they are for libtool+cmake --> cmake+cmake (c. #148 for Psi4 c. 2020-2021) --> cmake+cmake + +* `--enable-1body=N` --> `-D ENABLE_ONEBODY` +* `--enable-eri=N` --> `-D ENABLE_ERI=N` +* `--disable-eri` --> `-D ENABLE_ERI=-1` +* `--enable-eri3=N` --> `-D ENABLE_ERI3=N` +* `--enable-eri2=N` --> `-D ENABLE_ERI2=N` + +* `--with-shgauss-ordering=label` --> `-D LIBINT2_SHGAUSS_ORDERING=label` +* `--with-cartgauss-ordering=label` --> `-D LIBINT2_CARTGAUSS_ORDERING=label` +* `--with-shell-set=label` --> `-D LIBINT2_SHELL_SET=label` +* `--enable-eri3-pure-sh` --> `-D ERI3_PURE_SH=ON` +* `--enable-eri2-pure-sh` --> `-D ERI2_PURE_SH=ON` + +* `--with-max-am=N` --> `-D WITH_MAX_AM=N` +* `--with-max-am=N0,N1,N2` --> `-D WITH_MAX_AM="N0;N1;N2"` (notice semicolons and quotes. This is standard CMake list syntax) +* `--with-opt-am=N` --> `-D WITH_OPT_AM=N` +* `--with-opt-am=N0,N1,N2` --> `-D WITH_OPT_AM="N0;N1;N2"` + +* `--with-multipole-max-order=N` --> `-D MULTIPOLE_MAX_ORDER=N` + +* `--with-1body-max-am=N` --> `-D WITH_ONEBODY_MAX_AM=N` +* `--with-1body-max-am=N0,N1,N2` --> `-D WITH_ONEBODY_MAX_AM="N0;N1;N2"` +* `--with-1body-opt-am=N` --> `-D WITH_ONEBODY_OPT_AM=N` +* `--with-1body-opt-am=N0,N1,N2` --> `-D WITH_ONEBODY_OPT_AM="N0;N1;N2"` + +* `--with-eri-max-am=N` --> `-D WITH_ERI_MAX_AM=N` +* `--with-eri-max-am=N0,N1,N2` --> `-D WITH_ERI_MAX_AM="N0;N1;N2"` +* `--with-eri-opt-am=N` --> `-D WITH_ERI_OPT_AM=N` +* `--with-eri-opt-am=N0,N1,N2` --> `-D WITH_ERI_OPT_AM="N0;N1;N2"` + +* `--with-eri3-max-am=N` --> `-D WITH_ERI3_MAX_AM=N` +* `--with-eri3-max-am=N0,N1,N2` --> `-D WITH_ERI3_MAX_AM="N0;N1;N2"` +* `--with-eri3-opt-am=N` --> `-D WITH_ERI3_OPT_AM=N` +* `--with-eri3-opt-am=N0,N1,N2` --> `-D WITH_ERI3_OPT_AM="N0;N1;N2"` + +* `--with-eri2-max-am=N` --> `-D WITH_ERI2_MAX_AM=N` +* `--with-eri2-max-am=N0,N1,N2` --> `-D WITH_ERI2_MAX_AM="N0;N1;N2"` +* `--with-eri2-opt-am=N` --> `-D WITH_ERI2_OPT_AM=N` +* `--with-eri2-opt-am=N0,N1,N2` --> `-D WITH_ERI2_OPT_AM="N0;N1;N2"` + +* `--enable-g12=N` --> `-D ENABLE_G12=N` +* `--enable-g12dkh=N` --> `-D ENABLE_G12DKH` +* `--disable-t1g12-support` --> `-D ENABLE_T1G12_SUPPORT=OFF` +* `--with-g12-max-am=N` --> `-D WITH_G12_MAX_AM=N` +* `--with-g12-opt-am=N` --> `-D WITH_G12_OPT_AM=N` +* `--with-g12dkh-max-am=N` --> `-D WITH_G12DKH_MAX_AM=N` +* `--with-g12dkh-opt-am=N` --> `-D WITH_G12DKH_OPT_AM=N` + +* `--disable-1body-property-derivs` --> `-D DISABLE_ONEBODY_PROPERTY_DERIVS=ON` + +* `--enable-shared` --> `-D BUILD_SHARED=ON` --> `-D BUILD_SHARED_LIBS=ON` (standard CMake variable) +* `--enable-static` --> `-D BUILD_STATIC=ON` --> `-D BUILD_SHARED_LIBS=OFF` (standard CMake variable) +* `--enable-shared --enable-static` --> `-D BUILD_SHARED=ON -D BUILD_STATIC=ON` --> `-D LIBINT2_BUILD_SHARED_AND_STATIC_LIBS=ON` + +* `-D REQUIRE_CXX_API=ON` --> `-D ENABLE_CXX11API=ON` --> `-D REQUIRE_CXX_API=ON` +* `--enable-mpfr` --> assumed present --> `-D ENABLE_MPFR=ON` +* `--prefix=path` --> `-D CMAKE_INSTALL_PREFIX=path` (standard CMake variable) +* `--with-cmakedir=partialpath` --> `-D LIBINT2_INSTALL_CMAKEDIR=partialpath` +* `--with-real-type=type` --> `-D LIBINT2_REALTYPE=type` + +* (target) `libint2` --> `Libint2::int2` +* (target) `libint2_cxx` --> `Libint2::cxx` + +* `ENV(CXX)=/path/to/c++/compiler` --> `-D CMAKE_CXX_COMPILER=/path/to/c++/compiler` +* `ENV(CXXFLAGS)` --> `-D CMAKE_CXX_FLAGS` +* `ENV(CPPFLAGS)=-I/path/to/boost/includes` --> -D BOOST_ROOT=/path/to/boost/prefix` +* `ENV(FC)=/path/to/fortran/compiler` --> `-D CMAKE_Fortran_COMPILER=/path/to/fortran/compiler` + + +----------------------------------------------------------------------------- + +# Consuming Libint + +### Programming to Access Integrals + +* if you use C++11 or later (strongly recommended): read [this](https://github.com/evaleev/libint/wiki/using-modern-CPlusPlus-API) instead +* if you use pre-2011 C++, C, Fortran, or any other language, refer to the [Libint Programmer's Manual](http://sourceforge.net/projects/libint/files/libint-for-beginners/progman.pdf/download) for brief information on how to use the library in your code. + +### Consumption Targets + +| Namespaced Target[^15] | Component[^16] | Built by Default | Ensure Built | Ensure Excluded | Internal Target(s)[^17] | Alias[^18] | +| ---------------------- | -------------- | ---------------- | ----------------------------- | ----------------------------------------- | ----------------------------------- | ------------ | +| `Libint2::int2` | `C` | yes | always | impossible | `int-{static,shared}` | `libint2` | +| `Libint2::cxx` | `CXX_ho` | yes | `REQUIRE_CXX_API=ON` | `REQUIRE_CXX_API=OFF` and withhold Eigen3 | `int-cxx-headeronly-{static,shared}` | `libint2_cxx` | +| `Libint2::int2-cxx` | `CXX` | yes | `REQUIRE_CXX_API_COMPILED=ON` | `REQUIRE_CXX_API_COMPILED=OFF` | `int-cxx-compiled-{static,shared}` | +| Fortran local[^19] | (NYI) | no | `ENABLE_FORTRAN=ON` | `ENABLE_FORTRAN=OFF` | `libint_f` | + +[^15]: Targets for library consumer use. These are available after `find_package(Libint2)` or `add_subdirectory()`. +[^16]: Ensure target found in installation after `find_package(Libint2 COMPONENTS ...)`. +[^17]: Targets in src/lib/libint/CMakeLists.txt.export . Names subject to change. Use namespaced target names in any consuming code. +[^18]: Deprecated legacy aliases. Update any uses to namespaced target. +[^19]: The `libint_f` internal target defines the Fortran interface to Libint2. One must also link to `Libint2::int2` or `Libint2::cxx`. At present, it is not exported, and a namespaced target is not defined. + + +----------------------------------------------------------------------------- + +## Packagers + +* Decide if you want the Boost preprocessor headers bundled with Libint or if they should be a + build-against-time dependency of the C++11 interface. Withhold (bundle) or supply (dependency) + Boost detection paths from the library build accordingly. FWIW, Conda bundles. +* Decide if you want the compiled cxx library. something like it is in use in mpqc4 + + +----------------------------------------------------------------------------- + +# Platform-Specific Notes + +### Linux + +### macOS + +* Apple `clang++` and [MacPorts](http://www.macports.org/) `g++` (4.8) both work with `-std=c++11` flag +* MacPorts gmp package works fine +* On macOS the default `ar` program lacks support for response files (e.g., https://github.com/evaleev/libint/issues/135 and see https://gitlab.kitware.com/cmake/cmake/issues/16731). Thus you should install the GNU `ar` program (e.g., using HomeBrew: `brew install binutils`) and tell CMake to use it (e.g., add `-DCMAKE_AR=/usr/local/opt/binutils/bin/ar` to the CMake command line). + +### Windows + +* Several blocking or correctness issues exist; the most thorough list is at .github/workflows/cmake.yml +* A production path is to generate an export tarball with Linux, build static library on Windows, and consume +* Use MPIR package for GMP + + +----------------------------------------------------------------------------- + +# Program-Specific Notes + +### mpqc4 + +* standard libtool configuration: + + ``` + --enable-generic-code --with-max-am=6 --with-opt-am=3 --enable-eri3=0 --enable-eri2=0 --enable-eri3-pure-sh --enable-eri2-pure-sh --enable-fma --disable-1body-property-derivs + ``` + +* libtool configuration prior to Jan. 8, 2015: + + ``` + --enable-eri=0 --with-max-am=7 --with-opt-am=4 --disable-unrolling --enable-generic-code --enable-contracted-ints + ``` + +### gamess + +* standard libtool configuration: + + ``` + --enable-eri=0 --with-max-am=7 --with-opt-am=4 --disable-unrolling --enable-generic-code --enable-contracted-ints --with-cartgauss-ordering=gamess + ``` + +### orca + +* a libint library (version 2.0.2) is embedded in ORCA +* standard libtool configuration: + + ``` + --enable-eri=2 --enable-eri3=2 --enable-eri2=2 --with-max-am=7 --with-opt-am=4 --with-eri-max-am=7,4,3 --with-eri-opt-am=4,3,2 --disable-unrolling --enable-generic-code --enable-contracted-ints --with-cartgauss-ordering=orca --with-shell-set=orca --enable-eri3-pure-sh --enable-eri2-pure-sh + ``` + +### bagel + +* standard libtool configuration: + + ``` + --with-max-am=4 --with-eri3-max-am=6 --with-eri2-max-am=6 --enable-eri3=1 -enable-eri=1 --enable-eri2=1 --disable-unrolling --enable-generic-code --enable-contracted-ints --with-cartgauss-ordering=bagel + + ``` + +* if you want to use spherical Gaussians only add: `--enable-eri3-pure-sh --enable-eri2-pure-sh` (some tests may fail) +* It appears that on a Mac Libint and BAGEL must be either both static or both shared (2/3/2014) + +### psi4 + +* production CMake configuration: + + ``` + -D REQUIRE_CXX_API=ON + -D LIBINT2_SHGAUSS_ORDERING=gaussian + -D LIBINT2_CARTGAUSS_ORDERING=standard + -D LIBINT2_SHELL_SET=standard + -D ERI3_PURE_SH=OFF + -D ERI2_PURE_SH=OFF + -D ENABLE_ERI=2 + -D ENABLE_ERI3=2 + -D ENABLE_ERI2=2 + -D ENABLE_ONEBODY=2 + -D MULTIPOLE_MAX_ORDER=4 + -D WITH_MAX_AM="6;5;4" + -D WITH_ERI_MAX_AM="5;4;3" + -D WITH_ERI3_MAX_AM="6;5;4" + -D WITH_ERI2_MAX_AM="6;5;4" + ``` + +* minimal detection: + + ``` + find_package( + Libint2 + COMPONENTS + CXX_ho + gss + impure_sh + eri_c4_d0_l3 eri_c3_d0_l4 eri_c2_d0_l4 onebody_d0_l4 + eri_c4_d1_l2 eri_c3_d1_l3 eri_c2_d1_l3 onebody_d1_l3 + eri_c4_d2_l2 eri_c3_d2_l3 eri_c2_d2_l3 onebody_d2_l3 + ) + ``` + +* see [notes](https://github.com/psi4/psi4/blob/master/external/upstream/libint2/CMakeLists.txt) for details of Psi4/Libint2 configuration + +* Psi4 near-future configuration additions: + + ``` + -DDISABLE_ONEBODY_PROPERTY_DERIVS=OFF + -DENABLE_G12=1 + -DWITH_G12_MAX_AM=4 + -DWITH_G12_OPT_AM=3 + ``` + + +----------------------------------------------------------------------------- + +# Miscellaneous Questions + +#### Where do I get the source code? + +The only way to get the compiler source is from the [Libint source code repository](https://github.com/evaleev/libint)on [GitHub](github.com). You can use a client, like GitHub app or (our favorite) [SourceTree](http://www.sourcetreeapp.com) app from Atlassian. Or from the command line: `git clone https://github.com/evaleev/libint.git` + +#### What happened to autoconf? + +Version 2.5.0 and older of the exported libint library was buildable using GNU Autoconf and [GNU Make](https://www.gnu.org/software/make/). *As of version 2.6.0 the Autoconf build is deprecated*; the exported libint library should be configured with [CMake](https://cmake.org/) and built with [any CMake-supported generator](https://cmake.org/cmake/help/latest/manual/cmake-generators.7.html), e.g. Ninja and GNU Make. + +Version 2.7 and older of the compiler repo was buildable using GNU Autoconf. *As of version 2.8, the Autoconf build is deprecated*; use CMake instead. TODO 2.8 + +#### What is the status and importance of SIMD vectorization in Libint? + +SIMD vectorization is the crucial contributor to performance of a modern processor core. Libint code can typically hit up to 70% of FLOP peak on a scalar core, hence on a SIMD core divide that number by the vector length (4 for AVX in double precision). The situation is only going to get worse (accelerators already use 8- and 16-wide vector units, and future mainstream processors are likely to use 8-wide units also). Hence if your method spends significant portion of its time computing integrals start rewriting your code now. + +Vectorization of Libint is work in progress. However, by switching to AVX we see a factor of 2-2.5 speedup of the integrals kernels compared to scalar performance, thus we are optimistic that it will be possible to attain 50% of peak on AVX hardware. It is clear that significant reorganization of the manner in which integrals are computed and digested is involved, but these costs are unavoidable. + +#### What compiler is best? + +To obtain peak performance it is *very important* to use the C++ compiler and compiler options that are appropriate for the given platform. It is impossible to provide specific recommendations for specific platforms. The `ENABLE_XHOST` option does allow the compiler to optimize for current architecture. We recommend to use a vendor compiler (e.g., Intel) before trying clang++ and g++. In some situations, however, clang++ and g++ are known to outperform the x86 vendor compiler, so we recommend trying several compilers. + + diff --git a/LICENSE b/LICENSE index e3c433c92..d77f37a9e 100644 --- a/LICENSE +++ b/LICENSE @@ -1,6 +1,6 @@ Libint - a library for the evaluation of molecular integrals of many-body operators over Gaussian functions -Copyright (C) 2004-2020 Edward F. Valeev +Copyright (C) 2004-2021 Edward F. Valeev Libint is free software. Most of the source code of the Libint compiler (code generator) can be redistributed and/or modified under the terms of the GNU General Public License, version 3, diff --git a/Makefile b/Makefile deleted file mode 100644 index 460c286a3..000000000 --- a/Makefile +++ /dev/null @@ -1,131 +0,0 @@ -TOPDIR=. -ifndef SRCDIR - SRCDIR=$(shell pwd) -endif - --include $(TOPDIR)/Makedirlist --include $(TOPDIR)/src/lib/MakeVars - -SUBDIRS = src -CHECKSUBDIRS = tests/eri tests/unit tests/hartree-fock -CLEANSUBDIRS = $(SUBDIRS) $(CHECKSUBDIRS) -ALLSUBDIRS = $(CLEANSUBDIRS) doc $(CHECKSUBDIRS) - -default:: - for dir in $(SUBDIRS); \ - do \ - (cd $${dir} && $(MAKE) $(JOBS)) || exit 1; \ - done - -all:: default - -ifndef DODEPEND -DODEPENDOPT = "DODEPEND=no" -endif - -export:: - for dir in $(SUBDIRS); \ - do \ - (cd $${dir} && $(MAKE) $(DODEPENDOPT) export) || exit 1; \ - done - (cd export && $(MAKE) $(DODEPENDOPT) export) || exit 1; - -install:: all install_pkgconfig install_inc install_data - for dir in $(SUBDIRS); \ - do \ - (cd $${dir} && $(MAKE) $(DODEPENDOPT) install) || exit 1; \ - done - -ifdef pkgconfigdir -install_pkgconfig:: - $(INSTALL) $(INSTALLDIROPT) $(DESTDIR)$(pkgconfigdir) - $(INSTALL) $(INSTALLLIBOPT) $(TOPDIR)/libint2.pc $(DESTDIR)$(pkgconfigdir) -endif - -install_data:: - $(INSTALL) $(INSTALLDIROPT) $(DESTDIR)$(datadir)/basis - $(INSTALL) $(INSTALLLIBOPT) $(SRCTOPDIR)/lib/basis/* $(DESTDIR)$(datadir)/basis - -install_inc:: all - for dir in $(SUBDIRS); \ - do \ - (cd $${dir} && $(MAKE) $(DODEPENDOPT) install_inc) || exit 1; \ - done - -install_target:: all - for dir in $(SUBDIRS); \ - do \ - (cd $${dir} && $(MAKE) $(DODEPENDOPT) install_target) || exit 1; \ - done - -uninstall:: - for dir in $(SUBDIRS); \ - do \ - (cd $${dir} && $(MAKE) $(DODEPENDOPT) uninstall) || exit 1; \ - done - -clean:: - for dir in $(CLEANSUBDIRS); \ - do \ - (cd $${dir} && $(MAKE) $(DODEPENDOPT) clean) || exit 1; \ - done - -oclean:: - for dir in $(CLEANSUBDIRS); \ - do \ - (cd $${dir} && $(MAKE) $(DODEPENDOPT) oclean) || exit 1; \ - done - -distclean:: - for dir in $(ALLSUBDIRS); \ - do \ - (cd $${dir} && $(MAKE) $(DODEPENDOPT) distclean) || exit 1; \ - done - -rm -rf autom4te.cache config.status config.log conf*.file conf*.dir *.dSYM depcheck* libtool \ -Makedirlist libint2.pc include/libint2 - test -f libint2.pc.in || rm -rf include/libint2 - -targetclean:: - for dir in $(SUBDIRS); \ - do \ - (cd $${dir} && $(MAKE) $(DODEPENDOPT) targetclean) || exit 1; \ - done - -realclean:: - for dir in $(CLEANSUBDIRS); \ - do \ - (cd $${dir} && $(MAKE) $(DODEPENDOPT) realclean) || exit 1; \ - done - -check:: - for dir in $(CHECKSUBDIRS); \ - do \ - (cd $${dir} && $(MAKE) check) || exit 1; \ - done - -install-pdf:: pdf - (cd doc && $(MAKE) $(DODEPENDOPT) install-pdf) || exit 1; - -install-ps:: ps - (cd doc && $(MAKE) $(DODEPENDOPT) install-ps) || exit 1; - -install-dvi:: dvi - (cd doc && $(MAKE) $(DODEPENDOPT) install-dvi) || exit 1; - -install-html:: html - (cd doc && $(MAKE) $(DODEPENDOPT) install-html) || exit 1; - -pdf:: - (cd doc && $(MAKE) $(DODEPENDOPT) pdf) || exit 1; - -ps:: - (cd doc && $(MAKE) $(DODEPENDOPT) ps) || exit 1; - -dvi:: - (cd doc && $(MAKE) $(DODEPENDOPT) dvi) || exit 1; - -html:: - (cd doc && $(MAKE) $(DODEPENDOPT) html) || exit 1; - -doc:: - (cd doc && $(MAKE) $(DODEPENDOPT) install-pdf install-html) || exit 1; diff --git a/README.md b/README.md index 472d83563..1dbf1f3a9 100644 --- a/README.md +++ b/README.md @@ -1,9 +1,11 @@ -Libint - a library for the evaluation of molecular integrals of many-body operators over Gaussian functions +# Libint -- master status: [![Build Status](https://travis-ci.org/evaleev/libint.svg?branch=master)](https://travis-ci.org/evaleev/libint) +a library for the evaluation of molecular integrals of many-body operators over Gaussian functions + +- master status: ![Build Status](https://github.com/evaleev/libint/actions/workflows/cmake/badge.svg) - project page: http://libint.valeyev.net/ - e-mail - libint@valeyev.net -See [the wiki](https://github.com/evaleev/libint/wiki) for the installation and usage instructions. +See [the INSTALL.md file](INSTALL.md) for installation instructions and links to usage instructions. -Copyright (C) 2004-2021 Edward F. Valeev +Copyright (C) 2004-2022 Edward F. Valeev diff --git a/include/libint2/config.h.in b/archive_libtool/config.h.in similarity index 99% rename from include/libint2/config.h.in rename to archive_libtool/config.h.in index 16bfa5ad8..e6c227abe 100644 --- a/include/libint2/config.h.in +++ b/archive_libtool/config.h.in @@ -299,9 +299,6 @@ /* have stdint.h ? */ #undef HAVE_STDINT_H -/* have MPFR library ? */ -#undef LIBINT_HAS_MPFR - /* have posix_memalign ? */ #undef HAVE_POSIX_MEMALIGN @@ -349,9 +346,11 @@ #ifdef __has_cpp_attribute #if __has_cpp_attribute(deprecated) +#ifndef LIBINT_DEPRECATED #define LIBINT_DEPRECATED(msg) [[deprecated(msg)]] #endif #endif +#endif #ifndef LIBINT_DEPRECATED #define LIBINT_DEPRECATED(msg) LIBINT_XPRAGMA( LIBINT_CONCAT(message, msg) ) #endif diff --git a/configure.ac b/archive_libtool/configure.ac similarity index 99% rename from configure.ac rename to archive_libtool/configure.ac index f61eb2515..0ee9bbf44 100644 --- a/configure.ac +++ b/archive_libtool/configure.ac @@ -510,7 +510,7 @@ fi # check max am for 3-center ERIs, if needed ERI3_MAX_AM=$LIBINT_MAX_AM AC_ARG_WITH(eri3-max-am, -AS_HELP_STRING([--with-eri3-max-am=N],[Support 3-center ERIs for Gaussians of angular momentum up to N. Can specify values for each derivative levels as a list N0,N1,N2...]), +AS_HELP_STRING([--with-eri3-max-am=N],[Support 3-center ERIs for Gaussians of angular momentum up to N. Can specify values for each derivative levels as a list N0,N1,N2.... Set --with-max-am to mirror this option.]), [ case $withval in *,*) diff --git a/autogen.sh b/autogen.sh deleted file mode 100755 index be39819d9..000000000 --- a/autogen.sh +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/sh - -set -e - -aclocal -I lib/autoconf -autoconf - -rm -rf autom4te.cache aclocal.m4 - - diff --git a/bin/config.guess b/bin/config.guess deleted file mode 100755 index 79d1317f5..000000000 --- a/bin/config.guess +++ /dev/null @@ -1,1645 +0,0 @@ -#! /bin/sh -# Attempt to guess a canonical system name. -# Copyright 1992-2019 Free Software Foundation, Inc. - -timestamp='2019-03-04' - -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, see . -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that -# program. This Exception is an additional permission under section 7 -# of the GNU General Public License, version 3 ("GPLv3"). -# -# Originally written by Per Bothner; maintained since 2000 by Ben Elliston. -# -# You can get the latest version of this script from: -# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess -# -# Please send patches to . - - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] - -Output the configuration name of the system \`$me' is run on. - -Options: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.guess ($timestamp) - -Originally written by Per Bothner. -Copyright 1992-2019 Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" >&2 - exit 1 ;; - * ) - break ;; - esac -done - -if test $# != 0; then - echo "$me: too many arguments$help" >&2 - exit 1 -fi - -# CC_FOR_BUILD -- compiler used by this script. Note that the use of a -# compiler to aid in system detection is discouraged as it requires -# temporary files to be created and, as you can see below, it is a -# headache to deal with in a portable fashion. - -# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still -# use `HOST_CC' if defined, but it is deprecated. - -# Portable tmp directory creation inspired by the Autoconf team. - -tmp= -# shellcheck disable=SC2172 -trap 'test -z "$tmp" || rm -fr "$tmp"' 0 1 2 13 15 - -set_cc_for_build() { - : "${TMPDIR=/tmp}" - # shellcheck disable=SC2039 - { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || - { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir "$tmp" 2>/dev/null) ; } || - { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir "$tmp" 2>/dev/null) && echo "Warning: creating insecure temp directory" >&2 ; } || - { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } - dummy=$tmp/dummy - case ${CC_FOR_BUILD-},${HOST_CC-},${CC-} in - ,,) echo "int x;" > "$dummy.c" - for driver in cc gcc c89 c99 ; do - if ($driver -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then - CC_FOR_BUILD="$driver" - break - fi - done - if test x"$CC_FOR_BUILD" = x ; then - CC_FOR_BUILD=no_compiler_found - fi - ;; - ,,*) CC_FOR_BUILD=$CC ;; - ,*,*) CC_FOR_BUILD=$HOST_CC ;; - esac -} - -# This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# (ghazi@noc.rutgers.edu 1994-08-24) -if test -f /.attbin/uname ; then - PATH=$PATH:/.attbin ; export PATH -fi - -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - -case "$UNAME_SYSTEM" in -Linux|GNU|GNU/*) - # If the system lacks a compiler, then just pick glibc. - # We could probably try harder. - LIBC=gnu - - set_cc_for_build - cat <<-EOF > "$dummy.c" - #include - #if defined(__UCLIBC__) - LIBC=uclibc - #elif defined(__dietlibc__) - LIBC=dietlibc - #else - LIBC=gnu - #endif - EOF - eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`" - - # If ldd exists, use it to detect musl libc. - if command -v ldd >/dev/null && \ - ldd --version 2>&1 | grep -q ^musl - then - LIBC=musl - fi - ;; -esac - -# Note: order is significant - the case branches are not exclusive. - -case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in - *:NetBSD:*:*) - # NetBSD (nbsd) targets should (where applicable) match one or - # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, - # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently - # switched to ELF, *-*-netbsd* would select the old - # object file format. This provides both forward - # compatibility and a consistent mechanism for selecting the - # object file format. - # - # Note: NetBSD doesn't particularly care about the vendor - # portion of the name. We always set it to "unknown". - sysctl="sysctl -n hw.machine_arch" - UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \ - "/sbin/$sysctl" 2>/dev/null || \ - "/usr/sbin/$sysctl" 2>/dev/null || \ - echo unknown)` - case "$UNAME_MACHINE_ARCH" in - armeb) machine=armeb-unknown ;; - arm*) machine=arm-unknown ;; - sh3el) machine=shl-unknown ;; - sh3eb) machine=sh-unknown ;; - sh5el) machine=sh5le-unknown ;; - earmv*) - arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'` - endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'` - machine="${arch}${endian}"-unknown - ;; - *) machine="$UNAME_MACHINE_ARCH"-unknown ;; - esac - # The Operating System including object format, if it has switched - # to ELF recently (or will in the future) and ABI. - case "$UNAME_MACHINE_ARCH" in - earm*) - os=netbsdelf - ;; - arm*|i386|m68k|ns32k|sh3*|sparc|vax) - set_cc_for_build - if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ELF__ - then - # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). - # Return netbsd for either. FIX? - os=netbsd - else - os=netbsdelf - fi - ;; - *) - os=netbsd - ;; - esac - # Determine ABI tags. - case "$UNAME_MACHINE_ARCH" in - earm*) - expr='s/^earmv[0-9]/-eabi/;s/eb$//' - abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"` - ;; - esac - # The OS release - # Debian GNU/NetBSD machines have a different userland, and - # thus, need a distinct triplet. However, they do not need - # kernel version information, so it can be replaced with a - # suitable tag, in the style of linux-gnu. - case "$UNAME_VERSION" in - Debian*) - release='-gnu' - ;; - *) - release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2` - ;; - esac - # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: - # contains redundant information, the shorter form: - # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "$machine-${os}${release}${abi-}" - exit ;; - *:Bitrig:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` - echo "$UNAME_MACHINE_ARCH"-unknown-bitrig"$UNAME_RELEASE" - exit ;; - *:OpenBSD:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` - echo "$UNAME_MACHINE_ARCH"-unknown-openbsd"$UNAME_RELEASE" - exit ;; - *:LibertyBSD:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'` - echo "$UNAME_MACHINE_ARCH"-unknown-libertybsd"$UNAME_RELEASE" - exit ;; - *:MidnightBSD:*:*) - echo "$UNAME_MACHINE"-unknown-midnightbsd"$UNAME_RELEASE" - exit ;; - *:ekkoBSD:*:*) - echo "$UNAME_MACHINE"-unknown-ekkobsd"$UNAME_RELEASE" - exit ;; - *:SolidBSD:*:*) - echo "$UNAME_MACHINE"-unknown-solidbsd"$UNAME_RELEASE" - exit ;; - macppc:MirBSD:*:*) - echo powerpc-unknown-mirbsd"$UNAME_RELEASE" - exit ;; - *:MirBSD:*:*) - echo "$UNAME_MACHINE"-unknown-mirbsd"$UNAME_RELEASE" - exit ;; - *:Sortix:*:*) - echo "$UNAME_MACHINE"-unknown-sortix - exit ;; - *:Redox:*:*) - echo "$UNAME_MACHINE"-unknown-redox - exit ;; - mips:OSF1:*.*) - echo mips-dec-osf1 - exit ;; - alpha:OSF1:*:*) - case $UNAME_RELEASE in - *4.0) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - ;; - *5.*) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` - ;; - esac - # According to Compaq, /usr/sbin/psrinfo has been available on - # OSF/1 and Tru64 systems produced since 1995. I hope that - # covers most systems running today. This code pipes the CPU - # types through head -n 1, so we only detect the type of CPU 0. - ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` - case "$ALPHA_CPU_TYPE" in - "EV4 (21064)") - UNAME_MACHINE=alpha ;; - "EV4.5 (21064)") - UNAME_MACHINE=alpha ;; - "LCA4 (21066/21068)") - UNAME_MACHINE=alpha ;; - "EV5 (21164)") - UNAME_MACHINE=alphaev5 ;; - "EV5.6 (21164A)") - UNAME_MACHINE=alphaev56 ;; - "EV5.6 (21164PC)") - UNAME_MACHINE=alphapca56 ;; - "EV5.7 (21164PC)") - UNAME_MACHINE=alphapca57 ;; - "EV6 (21264)") - UNAME_MACHINE=alphaev6 ;; - "EV6.7 (21264A)") - UNAME_MACHINE=alphaev67 ;; - "EV6.8CB (21264C)") - UNAME_MACHINE=alphaev68 ;; - "EV6.8AL (21264B)") - UNAME_MACHINE=alphaev68 ;; - "EV6.8CX (21264D)") - UNAME_MACHINE=alphaev68 ;; - "EV6.9A (21264/EV69A)") - UNAME_MACHINE=alphaev69 ;; - "EV7 (21364)") - UNAME_MACHINE=alphaev7 ;; - "EV7.9 (21364A)") - UNAME_MACHINE=alphaev79 ;; - esac - # A Pn.n version is a patched version. - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. - echo "$UNAME_MACHINE"-dec-osf"`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`" - # Reset EXIT trap before exiting to avoid spurious non-zero exit code. - exitcode=$? - trap '' 0 - exit $exitcode ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-unknown-sysv4 - exit ;; - *:[Aa]miga[Oo][Ss]:*:*) - echo "$UNAME_MACHINE"-unknown-amigaos - exit ;; - *:[Mm]orph[Oo][Ss]:*:*) - echo "$UNAME_MACHINE"-unknown-morphos - exit ;; - *:OS/390:*:*) - echo i370-ibm-openedition - exit ;; - *:z/VM:*:*) - echo s390-ibm-zvmoe - exit ;; - *:OS400:*:*) - echo powerpc-ibm-os400 - exit ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix"$UNAME_RELEASE" - exit ;; - arm*:riscos:*:*|arm*:RISCOS:*:*) - echo arm-unknown-riscos - exit ;; - SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp - exit ;; - Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) - # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then - echo pyramid-pyramid-sysv3 - else - echo pyramid-pyramid-bsd - fi - exit ;; - NILE*:*:*:dcosx) - echo pyramid-pyramid-svr4 - exit ;; - DRS?6000:unix:4.0:6*) - echo sparc-icl-nx6 - exit ;; - DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) - case `/usr/bin/uname -p` in - sparc) echo sparc-icl-nx7; exit ;; - esac ;; - s390x:SunOS:*:*) - echo "$UNAME_MACHINE"-ibm-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`" - exit ;; - sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" - exit ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`" - exit ;; - i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) - echo i386-pc-auroraux"$UNAME_RELEASE" - exit ;; - i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) - set_cc_for_build - SUN_ARCH=i386 - # If there is a compiler, see if it is configured for 64-bit objects. - # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. - # This test works for both compilers. - if [ "$CC_FOR_BUILD" != no_compiler_found ]; then - if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_64BIT_ARCH >/dev/null - then - SUN_ARCH=x86_64 - fi - fi - echo "$SUN_ARCH"-pc-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" - exit ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" - exit ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) - UNAME_RELEASE=`uname -v` - ;; - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos"`echo "$UNAME_RELEASE"|sed -e 's/-/_/'`" - exit ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos"$UNAME_RELEASE" - exit ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3 - case "`/bin/arch`" in - sun3) - echo m68k-sun-sunos"$UNAME_RELEASE" - ;; - sun4) - echo sparc-sun-sunos"$UNAME_RELEASE" - ;; - esac - exit ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos"$UNAME_RELEASE" - exit ;; - # The situation for MiNT is a little confusing. The machine name - # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor - # > m68000). The system name ranges from "MiNT" over "FreeMiNT" - # to the lowercase version "mint" (or "freemint"). Finally - # the system name "TOS" denotes a system which is actually not - # MiNT. But MiNT is downward compatible to TOS, so this should - # be no problem. - atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint"$UNAME_RELEASE" - exit ;; - atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint"$UNAME_RELEASE" - exit ;; - *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint"$UNAME_RELEASE" - exit ;; - milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint"$UNAME_RELEASE" - exit ;; - hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint"$UNAME_RELEASE" - exit ;; - *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint"$UNAME_RELEASE" - exit ;; - m68k:machten:*:*) - echo m68k-apple-machten"$UNAME_RELEASE" - exit ;; - powerpc:machten:*:*) - echo powerpc-apple-machten"$UNAME_RELEASE" - exit ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 - exit ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix"$UNAME_RELEASE" - exit ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix"$UNAME_RELEASE" - exit ;; - 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix"$UNAME_RELEASE" - exit ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - set_cc_for_build - sed 's/^ //' << EOF > "$dummy.c" -#ifdef __cplusplus -#include /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif - #if defined (host_mips) && defined (MIPSEB) - #if defined (SYSTYPE_SYSV) - printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_SVR4) - printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) - printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0); - #endif - #endif - exit (-1); - } -EOF - $CC_FOR_BUILD -o "$dummy" "$dummy.c" && - dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` && - SYSTEM_NAME=`"$dummy" "$dummyarg"` && - { echo "$SYSTEM_NAME"; exit; } - echo mips-mips-riscos"$UNAME_RELEASE" - exit ;; - Motorola:PowerMAX_OS:*:*) - echo powerpc-motorola-powermax - exit ;; - Motorola:*:4.3:PL8-*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix - exit ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 - exit ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 - exit ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 - exit ;; - AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ "$UNAME_PROCESSOR" = mc88100 ] || [ "$UNAME_PROCESSOR" = mc88110 ] - then - if [ "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx ] || \ - [ "$TARGET_BINARY_INTERFACE"x = x ] - then - echo m88k-dg-dgux"$UNAME_RELEASE" - else - echo m88k-dg-dguxbcs"$UNAME_RELEASE" - fi - else - echo i586-dg-dgux"$UNAME_RELEASE" - fi - exit ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 - exit ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 - exit ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 - exit ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd - exit ;; - *:IRIX*:*:*) - echo mips-sgi-irix"`echo "$UNAME_RELEASE"|sed -e 's/-/_/g'`" - exit ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i*86:AIX:*:*) - echo i386-ibm-aix - exit ;; - ia64:AIX:*:*) - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV="$UNAME_VERSION.$UNAME_RELEASE" - fi - echo "$UNAME_MACHINE"-ibm-aix"$IBM_REV" - exit ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - set_cc_for_build - sed 's/^ //' << EOF > "$dummy.c" - #include - - main() - { - if (!__power_pc()) - exit(1); - puts("powerpc-ibm-aix3.2.5"); - exit(0); - } -EOF - if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` - then - echo "$SYSTEM_NAME" - else - echo rs6000-ibm-aix3.2.5 - fi - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi - exit ;; - *:AIX:*:[4567]) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` - if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then - IBM_ARCH=rs6000 - else - IBM_ARCH=powerpc - fi - if [ -x /usr/bin/lslpp ] ; then - IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | - awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` - else - IBM_REV="$UNAME_VERSION.$UNAME_RELEASE" - fi - echo "$IBM_ARCH"-ibm-aix"$IBM_REV" - exit ;; - *:AIX:*:*) - echo rs6000-ibm-aix - exit ;; - ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*) - echo romp-ibm-bsd4.4 - exit ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and - echo romp-ibm-bsd"$UNAME_RELEASE" # 4.3 with uname added to - exit ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx - exit ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 - exit ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd - exit ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 - exit ;; - 9000/[34678]??:HP-UX:*:*) - HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'` - case "$UNAME_MACHINE" in - 9000/31?) HP_ARCH=m68000 ;; - 9000/[34]??) HP_ARCH=m68k ;; - 9000/[678][0-9][0-9]) - if [ -x /usr/bin/getconf ]; then - sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` - sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` - case "$sc_cpu_version" in - 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0 - 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1 - 532) # CPU_PA_RISC2_0 - case "$sc_kernel_bits" in - 32) HP_ARCH=hppa2.0n ;; - 64) HP_ARCH=hppa2.0w ;; - '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20 - esac ;; - esac - fi - if [ "$HP_ARCH" = "" ]; then - set_cc_for_build - sed 's/^ //' << EOF > "$dummy.c" - - #define _HPUX_SOURCE - #include - #include - - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); - - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } -EOF - (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"` - test -z "$HP_ARCH" && HP_ARCH=hppa - fi ;; - esac - if [ "$HP_ARCH" = hppa2.0w ] - then - set_cc_for_build - - # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating - # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler - # generating 64-bit code. GNU and HP use different nomenclature: - # - # $ CC_FOR_BUILD=cc ./config.guess - # => hppa2.0w-hp-hpux11.23 - # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess - # => hppa64-hp-hpux11.23 - - if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | - grep -q __LP64__ - then - HP_ARCH=hppa2.0w - else - HP_ARCH=hppa64 - fi - fi - echo "$HP_ARCH"-hp-hpux"$HPUX_REV" - exit ;; - ia64:HP-UX:*:*) - HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'` - echo ia64-hp-hpux"$HPUX_REV" - exit ;; - 3050*:HI-UX:*:*) - set_cc_for_build - sed 's/^ //' << EOF > "$dummy.c" - #include - int - main () - { - long cpu = sysconf (_SC_CPU_VERSION); - /* The order matters, because CPU_IS_HP_MC68K erroneously returns - true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct - results, however. */ - if (CPU_IS_PA_RISC (cpu)) - { - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; - case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; - default: puts ("hppa-hitachi-hiuxwe2"); break; - } - } - else if (CPU_IS_HP_MC68K (cpu)) - puts ("m68k-hitachi-hiuxwe2"); - else puts ("unknown-hitachi-hiuxwe2"); - exit (0); - } -EOF - $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` && - { echo "$SYSTEM_NAME"; exit; } - echo unknown-hitachi-hiuxwe2 - exit ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*) - echo hppa1.1-hp-bsd - exit ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd - exit ;; - *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) - echo hppa1.0-hp-mpeix - exit ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*) - echo hppa1.1-hp-osf - exit ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf - exit ;; - i*86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo "$UNAME_MACHINE"-unknown-osf1mk - else - echo "$UNAME_MACHINE"-unknown-osf1 - fi - exit ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites - exit ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd - exit ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd - exit ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd - exit ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd - exit ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*[A-Z]90:*:*:*) - echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \ - | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ - -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*T3E:*:*:*) - echo alphaev5-cray-unicosmk"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*SV1:*:*:*) - echo sv1-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' - exit ;; - *:UNICOS/mp:*:*) - echo craynv-cray-unicosmp"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' - exit ;; - F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` - FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` - FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'` - echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - 5000:UNIX_System_V:4.*:*) - FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` - FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'` - echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) - echo "$UNAME_MACHINE"-pc-bsdi"$UNAME_RELEASE" - exit ;; - sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi"$UNAME_RELEASE" - exit ;; - *:BSD/OS:*:*) - echo "$UNAME_MACHINE"-unknown-bsdi"$UNAME_RELEASE" - exit ;; - arm:FreeBSD:*:*) - UNAME_PROCESSOR=`uname -p` - set_cc_for_build - if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_PCS_VFP - then - echo "${UNAME_PROCESSOR}"-unknown-freebsd"`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`"-gnueabi - else - echo "${UNAME_PROCESSOR}"-unknown-freebsd"`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`"-gnueabihf - fi - exit ;; - *:FreeBSD:*:*) - UNAME_PROCESSOR=`/usr/bin/uname -p` - case "$UNAME_PROCESSOR" in - amd64) - UNAME_PROCESSOR=x86_64 ;; - i386) - UNAME_PROCESSOR=i586 ;; - esac - echo "$UNAME_PROCESSOR"-unknown-freebsd"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`" - exit ;; - i*:CYGWIN*:*) - echo "$UNAME_MACHINE"-pc-cygwin - exit ;; - *:MINGW64*:*) - echo "$UNAME_MACHINE"-pc-mingw64 - exit ;; - *:MINGW*:*) - echo "$UNAME_MACHINE"-pc-mingw32 - exit ;; - *:MSYS*:*) - echo "$UNAME_MACHINE"-pc-msys - exit ;; - i*:PW*:*) - echo "$UNAME_MACHINE"-pc-pw32 - exit ;; - *:Interix*:*) - case "$UNAME_MACHINE" in - x86) - echo i586-pc-interix"$UNAME_RELEASE" - exit ;; - authenticamd | genuineintel | EM64T) - echo x86_64-unknown-interix"$UNAME_RELEASE" - exit ;; - IA64) - echo ia64-unknown-interix"$UNAME_RELEASE" - exit ;; - esac ;; - i*:UWIN*:*) - echo "$UNAME_MACHINE"-pc-uwin - exit ;; - amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) - echo x86_64-pc-cygwin - exit ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" - exit ;; - *:GNU:*:*) - # the GNU system - echo "`echo "$UNAME_MACHINE"|sed -e 's,[-/].*$,,'`-unknown-$LIBC`echo "$UNAME_RELEASE"|sed -e 's,/.*$,,'`" - exit ;; - *:GNU/*:*:*) - # other systems with GNU libc and userland - echo "$UNAME_MACHINE-unknown-`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`-$LIBC" - exit ;; - *:Minix:*:*) - echo "$UNAME_MACHINE"-unknown-minix - exit ;; - aarch64:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - aarch64_be:Linux:*:*) - UNAME_MACHINE=aarch64_be - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep -q ld.so.1 - if test "$?" = 0 ; then LIBC=gnulibc1 ; fi - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - arc:Linux:*:* | arceb:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - arm*:Linux:*:*) - set_cc_for_build - if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_EABI__ - then - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - else - if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_PCS_VFP - then - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabi - else - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabihf - fi - fi - exit ;; - avr32*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - cris:Linux:*:*) - echo "$UNAME_MACHINE"-axis-linux-"$LIBC" - exit ;; - crisv32:Linux:*:*) - echo "$UNAME_MACHINE"-axis-linux-"$LIBC" - exit ;; - e2k:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - frv:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - hexagon:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - i*86:Linux:*:*) - echo "$UNAME_MACHINE"-pc-linux-"$LIBC" - exit ;; - ia64:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - k1om:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - m32r*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - m68*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - mips:Linux:*:* | mips64:Linux:*:*) - set_cc_for_build - IS_GLIBC=0 - test x"${LIBC}" = xgnu && IS_GLIBC=1 - sed 's/^ //' << EOF > "$dummy.c" - #undef CPU - #undef mips - #undef mipsel - #undef mips64 - #undef mips64el - #if ${IS_GLIBC} && defined(_ABI64) - LIBCABI=gnuabi64 - #else - #if ${IS_GLIBC} && defined(_ABIN32) - LIBCABI=gnuabin32 - #else - LIBCABI=${LIBC} - #endif - #endif - - #if ${IS_GLIBC} && defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6 - CPU=mipsisa64r6 - #else - #if ${IS_GLIBC} && !defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6 - CPU=mipsisa32r6 - #else - #if defined(__mips64) - CPU=mips64 - #else - CPU=mips - #endif - #endif - #endif - - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - MIPS_ENDIAN=el - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - MIPS_ENDIAN= - #else - MIPS_ENDIAN= - #endif - #endif -EOF - eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU\|^MIPS_ENDIAN\|^LIBCABI'`" - test "x$CPU" != x && { echo "$CPU${MIPS_ENDIAN}-unknown-linux-$LIBCABI"; exit; } - ;; - mips64el:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - openrisc*:Linux:*:*) - echo or1k-unknown-linux-"$LIBC" - exit ;; - or32:Linux:*:* | or1k*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - padre:Linux:*:*) - echo sparc-unknown-linux-"$LIBC" - exit ;; - parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-"$LIBC" - exit ;; - parisc:Linux:*:* | hppa:Linux:*:*) - # Look for CPU level - case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux-"$LIBC" ;; - PA8*) echo hppa2.0-unknown-linux-"$LIBC" ;; - *) echo hppa-unknown-linux-"$LIBC" ;; - esac - exit ;; - ppc64:Linux:*:*) - echo powerpc64-unknown-linux-"$LIBC" - exit ;; - ppc:Linux:*:*) - echo powerpc-unknown-linux-"$LIBC" - exit ;; - ppc64le:Linux:*:*) - echo powerpc64le-unknown-linux-"$LIBC" - exit ;; - ppcle:Linux:*:*) - echo powerpcle-unknown-linux-"$LIBC" - exit ;; - riscv32:Linux:*:* | riscv64:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - s390:Linux:*:* | s390x:Linux:*:*) - echo "$UNAME_MACHINE"-ibm-linux-"$LIBC" - exit ;; - sh64*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - sh*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - sparc:Linux:*:* | sparc64:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - tile*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - vax:Linux:*:*) - echo "$UNAME_MACHINE"-dec-linux-"$LIBC" - exit ;; - x86_64:Linux:*:*) - echo "$UNAME_MACHINE"-pc-linux-"$LIBC" - exit ;; - xtensa*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - i*86:DYNIX/ptx:4*:*) - # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. - # earlier versions are messed up and put the nodename in both - # sysname and nodename. - echo i386-sequent-sysv4 - exit ;; - i*86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, - # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. - echo "$UNAME_MACHINE"-pc-sysv4.2uw"$UNAME_VERSION" - exit ;; - i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility - # is probably installed. - echo "$UNAME_MACHINE"-pc-os2-emx - exit ;; - i*86:XTS-300:*:STOP) - echo "$UNAME_MACHINE"-unknown-stop - exit ;; - i*86:atheos:*:*) - echo "$UNAME_MACHINE"-unknown-atheos - exit ;; - i*86:syllable:*:*) - echo "$UNAME_MACHINE"-pc-syllable - exit ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) - echo i386-unknown-lynxos"$UNAME_RELEASE" - exit ;; - i*86:*DOS:*:*) - echo "$UNAME_MACHINE"-pc-msdosdjgpp - exit ;; - i*86:*:4.*:*) - UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'` - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo "$UNAME_MACHINE"-univel-sysv"$UNAME_REL" - else - echo "$UNAME_MACHINE"-pc-sysv"$UNAME_REL" - fi - exit ;; - i*86:*:5:[678]*) - # UnixWare 7.x, OpenUNIX and OpenServer 6. - case `/bin/uname -X | grep "^Machine"` in - *486*) UNAME_MACHINE=i486 ;; - *Pentium) UNAME_MACHINE=i586 ;; - *Pent*|*Celeron) UNAME_MACHINE=i686 ;; - esac - echo "$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}" - exit ;; - i*86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` - (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ - && UNAME_MACHINE=i586 - (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ - && UNAME_MACHINE=i686 - (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ - && UNAME_MACHINE=i686 - echo "$UNAME_MACHINE"-pc-sco"$UNAME_REL" - else - echo "$UNAME_MACHINE"-pc-sysv32 - fi - exit ;; - pc:*:*:*) - # Left here for compatibility: - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i586. - # Note: whatever this is, it MUST be the same as what config.sub - # prints for the "djgpp" host, or else GDB configure will decide that - # this is a cross-build. - echo i586-pc-msdosdjgpp - exit ;; - Intel:Mach:3*:*) - echo i386-pc-mach3 - exit ;; - paragon:*:*:*) - echo i860-intel-osf1 - exit ;; - i860:*:4.*:*) # i860-SVR4 - if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv"$UNAME_RELEASE" # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv"$UNAME_RELEASE" # Unknown i860-SVR4 - fi - exit ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv - exit ;; - mc68k:UNIX:SYSTEM5:3.51m) - echo m68k-convergent-sysv - exit ;; - M680?0:D-NIX:5.3:*) - echo m68k-diab-dnix - exit ;; - M68*:*:R3V[5678]*:*) - test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; - 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4; exit; } ;; - NCR*:*:4.2:* | MPRAS*:*:4.2:*) - OS_REL='.3' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } - /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ - && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; - m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) - echo m68k-unknown-lynxos"$UNAME_RELEASE" - exit ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 - exit ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos"$UNAME_RELEASE" - exit ;; - rs6000:LynxOS:2.*:*) - echo rs6000-unknown-lynxos"$UNAME_RELEASE" - exit ;; - PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) - echo powerpc-unknown-lynxos"$UNAME_RELEASE" - exit ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv"$UNAME_RELEASE" - exit ;; - RM*:ReliantUNIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo "$UNAME_MACHINE"-sni-sysv4 - else - echo ns32k-sni-sysv - fi - exit ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says - echo i586-unisys-sysv4 - exit ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes . - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 - exit ;; - *:*:*:FTX*) - # From seanf@swdc.stratus.com. - echo i860-stratus-sysv4 - exit ;; - i*86:VOS:*:*) - # From Paul.Green@stratus.com. - echo "$UNAME_MACHINE"-stratus-vos - exit ;; - *:VOS:*:*) - # From Paul.Green@stratus.com. - echo hppa1.1-stratus-vos - exit ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux"$UNAME_RELEASE" - exit ;; - news*:NEWS-OS:6*:*) - echo mips-sony-newsos6 - exit ;; - R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then - echo mips-nec-sysv"$UNAME_RELEASE" - else - echo mips-unknown-sysv"$UNAME_RELEASE" - fi - exit ;; - BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. - echo powerpc-be-beos - exit ;; - BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. - echo powerpc-apple-beos - exit ;; - BePC:BeOS:*:*) # BeOS running on Intel PC compatible. - echo i586-pc-beos - exit ;; - BePC:Haiku:*:*) # Haiku running on Intel PC compatible. - echo i586-pc-haiku - exit ;; - x86_64:Haiku:*:*) - echo x86_64-unknown-haiku - exit ;; - SX-4:SUPER-UX:*:*) - echo sx4-nec-superux"$UNAME_RELEASE" - exit ;; - SX-5:SUPER-UX:*:*) - echo sx5-nec-superux"$UNAME_RELEASE" - exit ;; - SX-6:SUPER-UX:*:*) - echo sx6-nec-superux"$UNAME_RELEASE" - exit ;; - SX-7:SUPER-UX:*:*) - echo sx7-nec-superux"$UNAME_RELEASE" - exit ;; - SX-8:SUPER-UX:*:*) - echo sx8-nec-superux"$UNAME_RELEASE" - exit ;; - SX-8R:SUPER-UX:*:*) - echo sx8r-nec-superux"$UNAME_RELEASE" - exit ;; - SX-ACE:SUPER-UX:*:*) - echo sxace-nec-superux"$UNAME_RELEASE" - exit ;; - Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody"$UNAME_RELEASE" - exit ;; - *:Rhapsody:*:*) - echo "$UNAME_MACHINE"-apple-rhapsody"$UNAME_RELEASE" - exit ;; - *:Darwin:*:*) - UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown - set_cc_for_build - if test "$UNAME_PROCESSOR" = unknown ; then - UNAME_PROCESSOR=powerpc - fi - if test "`echo "$UNAME_RELEASE" | sed -e 's/\..*//'`" -le 10 ; then - if [ "$CC_FOR_BUILD" != no_compiler_found ]; then - if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_64BIT_ARCH >/dev/null - then - case $UNAME_PROCESSOR in - i386) UNAME_PROCESSOR=x86_64 ;; - powerpc) UNAME_PROCESSOR=powerpc64 ;; - esac - fi - # On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc - if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \ - (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_PPC >/dev/null - then - UNAME_PROCESSOR=powerpc - fi - fi - elif test "$UNAME_PROCESSOR" = i386 ; then - # Avoid executing cc on OS X 10.9, as it ships with a stub - # that puts up a graphical alert prompting to install - # developer tools. Any system running Mac OS X 10.7 or - # later (Darwin 11 and later) is required to have a 64-bit - # processor. This is not true of the ARM version of Darwin - # that Apple uses in portable devices. - UNAME_PROCESSOR=x86_64 - fi - echo "$UNAME_PROCESSOR"-apple-darwin"$UNAME_RELEASE" - exit ;; - *:procnto*:*:* | *:QNX:[0123456789]*:*) - UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = x86; then - UNAME_PROCESSOR=i386 - UNAME_MACHINE=pc - fi - echo "$UNAME_PROCESSOR"-"$UNAME_MACHINE"-nto-qnx"$UNAME_RELEASE" - exit ;; - *:QNX:*:4*) - echo i386-pc-qnx - exit ;; - NEO-*:NONSTOP_KERNEL:*:*) - echo neo-tandem-nsk"$UNAME_RELEASE" - exit ;; - NSE-*:NONSTOP_KERNEL:*:*) - echo nse-tandem-nsk"$UNAME_RELEASE" - exit ;; - NSR-*:NONSTOP_KERNEL:*:*) - echo nsr-tandem-nsk"$UNAME_RELEASE" - exit ;; - NSV-*:NONSTOP_KERNEL:*:*) - echo nsv-tandem-nsk"$UNAME_RELEASE" - exit ;; - NSX-*:NONSTOP_KERNEL:*:*) - echo nsx-tandem-nsk"$UNAME_RELEASE" - exit ;; - *:NonStop-UX:*:*) - echo mips-compaq-nonstopux - exit ;; - BS2000:POSIX*:*:*) - echo bs2000-siemens-sysv - exit ;; - DS/*:UNIX_System_V:*:*) - echo "$UNAME_MACHINE"-"$UNAME_SYSTEM"-"$UNAME_RELEASE" - exit ;; - *:Plan9:*:*) - # "uname -m" is not consistent, so use $cputype instead. 386 - # is converted to i386 for consistency with other x86 - # operating systems. - # shellcheck disable=SC2154 - if test "$cputype" = 386; then - UNAME_MACHINE=i386 - else - UNAME_MACHINE="$cputype" - fi - echo "$UNAME_MACHINE"-unknown-plan9 - exit ;; - *:TOPS-10:*:*) - echo pdp10-unknown-tops10 - exit ;; - *:TENEX:*:*) - echo pdp10-unknown-tenex - exit ;; - KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) - echo pdp10-dec-tops20 - exit ;; - XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) - echo pdp10-xkl-tops20 - exit ;; - *:TOPS-20:*:*) - echo pdp10-unknown-tops20 - exit ;; - *:ITS:*:*) - echo pdp10-unknown-its - exit ;; - SEI:*:*:SEIUX) - echo mips-sei-seiux"$UNAME_RELEASE" - exit ;; - *:DragonFly:*:*) - echo "$UNAME_MACHINE"-unknown-dragonfly"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`" - exit ;; - *:*VMS:*:*) - UNAME_MACHINE=`(uname -p) 2>/dev/null` - case "$UNAME_MACHINE" in - A*) echo alpha-dec-vms ; exit ;; - I*) echo ia64-dec-vms ; exit ;; - V*) echo vax-dec-vms ; exit ;; - esac ;; - *:XENIX:*:SysV) - echo i386-pc-xenix - exit ;; - i*86:skyos:*:*) - echo "$UNAME_MACHINE"-pc-skyos"`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`" - exit ;; - i*86:rdos:*:*) - echo "$UNAME_MACHINE"-pc-rdos - exit ;; - i*86:AROS:*:*) - echo "$UNAME_MACHINE"-pc-aros - exit ;; - x86_64:VMkernel:*:*) - echo "$UNAME_MACHINE"-unknown-esx - exit ;; - amd64:Isilon\ OneFS:*:*) - echo x86_64-unknown-onefs - exit ;; - *:Unleashed:*:*) - echo "$UNAME_MACHINE"-unknown-unleashed"$UNAME_RELEASE" - exit ;; -esac - -# No uname command or uname output not recognized. -set_cc_for_build -cat > "$dummy.c" < -#include -#endif -main () -{ -#if defined (sony) -#if defined (MIPSEB) - /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, - I don't know.... */ - printf ("mips-sony-bsd\n"); exit (0); -#else -#include - printf ("m68k-sony-newsos%s\n", -#ifdef NEWSOS4 - "4" -#else - "" -#endif - ); exit (0); -#endif -#endif - -#if defined (NeXT) -#if !defined (__ARCHITECTURE__) -#define __ARCHITECTURE__ "m68k" -#endif - int version; - version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; - if (version < 4) - printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); - else - printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); - exit (0); -#endif - -#if defined (MULTIMAX) || defined (n16) -#if defined (UMAXV) - printf ("ns32k-encore-sysv\n"); exit (0); -#else -#if defined (CMU) - printf ("ns32k-encore-mach\n"); exit (0); -#else - printf ("ns32k-encore-bsd\n"); exit (0); -#endif -#endif -#endif - -#if defined (__386BSD__) - printf ("i386-pc-bsd\n"); exit (0); -#endif - -#if defined (sequent) -#if defined (i386) - printf ("i386-sequent-dynix\n"); exit (0); -#endif -#if defined (ns32000) - printf ("ns32k-sequent-dynix\n"); exit (0); -#endif -#endif - -#if defined (_SEQUENT_) - struct utsname un; - - uname(&un); - if (strncmp(un.version, "V2", 2) == 0) { - printf ("i386-sequent-ptx2\n"); exit (0); - } - if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ - printf ("i386-sequent-ptx1\n"); exit (0); - } - printf ("i386-sequent-ptx\n"); exit (0); -#endif - -#if defined (vax) -#if !defined (ultrix) -#include -#if defined (BSD) -#if BSD == 43 - printf ("vax-dec-bsd4.3\n"); exit (0); -#else -#if BSD == 199006 - printf ("vax-dec-bsd4.3reno\n"); exit (0); -#else - printf ("vax-dec-bsd\n"); exit (0); -#endif -#endif -#else - printf ("vax-dec-bsd\n"); exit (0); -#endif -#else - printf ("vax-dec-ultrix\n"); exit (0); -#endif -#endif -#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__) -#if defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__) -#include -#if defined(_SIZE_T_) /* >= ULTRIX4 */ - printf ("mips-dec-ultrix4\n"); exit (0); -#else -#if defined(ULTRIX3) || defined(ultrix3) || defined(SIGLOST) - printf ("mips-dec-ultrix3\n"); exit (0); -#endif -#endif -#endif -#endif - -#if defined (alliant) && defined (i860) - printf ("i860-alliant-bsd\n"); exit (0); -#endif - - exit (1); -} -EOF - -$CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } - -# Apollos put the system type in the environment. -test -d /usr/apollo && { echo "$ISP-apollo-$SYSTYPE"; exit; } - -echo "$0: unable to guess system type" >&2 - -case "$UNAME_MACHINE:$UNAME_SYSTEM" in - mips:Linux | mips64:Linux) - # If we got here on MIPS GNU/Linux, output extra information. - cat >&2 <&2 </dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null` - -hostinfo = `(hostinfo) 2>/dev/null` -/bin/universe = `(/bin/universe) 2>/dev/null` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` -/bin/arch = `(/bin/arch) 2>/dev/null` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` - -UNAME_MACHINE = "$UNAME_MACHINE" -UNAME_RELEASE = "$UNAME_RELEASE" -UNAME_SYSTEM = "$UNAME_SYSTEM" -UNAME_VERSION = "$UNAME_VERSION" -EOF - -exit 1 - -# Local variables: -# eval: (add-hook 'before-save-hook 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/bin/config.sub b/bin/config.sub deleted file mode 100644 index a44fd8ae9..000000000 --- a/bin/config.sub +++ /dev/null @@ -1,1797 +0,0 @@ -#! /bin/sh -# Configuration validation subroutine script. -# Copyright 1992-2019 Free Software Foundation, Inc. - -timestamp='2019-01-05' - -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, see . -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that -# program. This Exception is an additional permission under section 7 -# of the GNU General Public License, version 3 ("GPLv3"). - - -# Please send patches to . -# -# Configuration subroutine to validate and canonicalize a configuration type. -# Supply the specified configuration type as an argument. -# If it is invalid, we print an error message on stderr and exit with code 1. -# Otherwise, we print the canonical config type on stdout and succeed. - -# You can get the latest version of this script from: -# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub - -# This file is supposed to be the same for all GNU packages -# and recognize all the CPU types, system types and aliases -# that are meaningful with *any* GNU software. -# Each package is responsible for reporting which valid configurations -# it does not support. The user should be able to distinguish -# a failure to support a valid configuration from a meaningless -# configuration. - -# The goal of this file is to map all the various variations of a given -# machine specification into a single specification in the form: -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or in some cases, the newer four-part form: -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# It is wrong to echo any other type of specification. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS - -Canonicalize a configuration name. - -Options: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.sub ($timestamp) - -Copyright 1992-2019 Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" >&2 - exit 1 ;; - - *local*) - # First pass through any local machine types. - echo "$1" - exit ;; - - * ) - break ;; - esac -done - -case $# in - 0) echo "$me: missing argument$help" >&2 - exit 1;; - 1) ;; - *) echo "$me: too many arguments$help" >&2 - exit 1;; -esac - -# Split fields of configuration type -# shellcheck disable=SC2162 -IFS="-" read field1 field2 field3 field4 <&2 - exit 1 - ;; - *-*-*-*) - basic_machine=$field1-$field2 - os=$field3-$field4 - ;; - *-*-*) - # Ambiguous whether COMPANY is present, or skipped and KERNEL-OS is two - # parts - maybe_os=$field2-$field3 - case $maybe_os in - nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc \ - | linux-newlib* | linux-musl* | linux-uclibc* | uclinux-uclibc* \ - | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* \ - | netbsd*-eabi* | kopensolaris*-gnu* | cloudabi*-eabi* \ - | storm-chaos* | os2-emx* | rtmk-nova*) - basic_machine=$field1 - os=$maybe_os - ;; - android-linux) - basic_machine=$field1-unknown - os=linux-android - ;; - *) - basic_machine=$field1-$field2 - os=$field3 - ;; - esac - ;; - *-*) - # A lone config we happen to match not fitting any pattern - case $field1-$field2 in - decstation-3100) - basic_machine=mips-dec - os= - ;; - *-*) - # Second component is usually, but not always the OS - case $field2 in - # Prevent following clause from handling this valid os - sun*os*) - basic_machine=$field1 - os=$field2 - ;; - # Manufacturers - dec* | mips* | sequent* | encore* | pc533* | sgi* | sony* \ - | att* | 7300* | 3300* | delta* | motorola* | sun[234]* \ - | unicom* | ibm* | next | hp | isi* | apollo | altos* \ - | convergent* | ncr* | news | 32* | 3600* | 3100* \ - | hitachi* | c[123]* | convex* | sun | crds | omron* | dg \ - | ultra | tti* | harris | dolphin | highlevel | gould \ - | cbm | ns | masscomp | apple | axis | knuth | cray \ - | microblaze* | sim | cisco \ - | oki | wec | wrs | winbond) - basic_machine=$field1-$field2 - os= - ;; - *) - basic_machine=$field1 - os=$field2 - ;; - esac - ;; - esac - ;; - *) - # Convert single-component short-hands not valid as part of - # multi-component configurations. - case $field1 in - 386bsd) - basic_machine=i386-pc - os=bsd - ;; - a29khif) - basic_machine=a29k-amd - os=udi - ;; - adobe68k) - basic_machine=m68010-adobe - os=scout - ;; - alliant) - basic_machine=fx80-alliant - os= - ;; - altos | altos3068) - basic_machine=m68k-altos - os= - ;; - am29k) - basic_machine=a29k-none - os=bsd - ;; - amdahl) - basic_machine=580-amdahl - os=sysv - ;; - amiga) - basic_machine=m68k-unknown - os= - ;; - amigaos | amigados) - basic_machine=m68k-unknown - os=amigaos - ;; - amigaunix | amix) - basic_machine=m68k-unknown - os=sysv4 - ;; - apollo68) - basic_machine=m68k-apollo - os=sysv - ;; - apollo68bsd) - basic_machine=m68k-apollo - os=bsd - ;; - aros) - basic_machine=i386-pc - os=aros - ;; - aux) - basic_machine=m68k-apple - os=aux - ;; - balance) - basic_machine=ns32k-sequent - os=dynix - ;; - blackfin) - basic_machine=bfin-unknown - os=linux - ;; - cegcc) - basic_machine=arm-unknown - os=cegcc - ;; - convex-c1) - basic_machine=c1-convex - os=bsd - ;; - convex-c2) - basic_machine=c2-convex - os=bsd - ;; - convex-c32) - basic_machine=c32-convex - os=bsd - ;; - convex-c34) - basic_machine=c34-convex - os=bsd - ;; - convex-c38) - basic_machine=c38-convex - os=bsd - ;; - cray) - basic_machine=j90-cray - os=unicos - ;; - crds | unos) - basic_machine=m68k-crds - os= - ;; - da30) - basic_machine=m68k-da30 - os= - ;; - decstation | pmax | pmin | dec3100 | decstatn) - basic_machine=mips-dec - os= - ;; - delta88) - basic_machine=m88k-motorola - os=sysv3 - ;; - dicos) - basic_machine=i686-pc - os=dicos - ;; - djgpp) - basic_machine=i586-pc - os=msdosdjgpp - ;; - ebmon29k) - basic_machine=a29k-amd - os=ebmon - ;; - es1800 | OSE68k | ose68k | ose | OSE) - basic_machine=m68k-ericsson - os=ose - ;; - gmicro) - basic_machine=tron-gmicro - os=sysv - ;; - go32) - basic_machine=i386-pc - os=go32 - ;; - h8300hms) - basic_machine=h8300-hitachi - os=hms - ;; - h8300xray) - basic_machine=h8300-hitachi - os=xray - ;; - h8500hms) - basic_machine=h8500-hitachi - os=hms - ;; - harris) - basic_machine=m88k-harris - os=sysv3 - ;; - hp300) - basic_machine=m68k-hp - ;; - hp300bsd) - basic_machine=m68k-hp - os=bsd - ;; - hp300hpux) - basic_machine=m68k-hp - os=hpux - ;; - hppaosf) - basic_machine=hppa1.1-hp - os=osf - ;; - hppro) - basic_machine=hppa1.1-hp - os=proelf - ;; - i386mach) - basic_machine=i386-mach - os=mach - ;; - vsta) - basic_machine=i386-pc - os=vsta - ;; - isi68 | isi) - basic_machine=m68k-isi - os=sysv - ;; - m68knommu) - basic_machine=m68k-unknown - os=linux - ;; - magnum | m3230) - basic_machine=mips-mips - os=sysv - ;; - merlin) - basic_machine=ns32k-utek - os=sysv - ;; - mingw64) - basic_machine=x86_64-pc - os=mingw64 - ;; - mingw32) - basic_machine=i686-pc - os=mingw32 - ;; - mingw32ce) - basic_machine=arm-unknown - os=mingw32ce - ;; - monitor) - basic_machine=m68k-rom68k - os=coff - ;; - morphos) - basic_machine=powerpc-unknown - os=morphos - ;; - moxiebox) - basic_machine=moxie-unknown - os=moxiebox - ;; - msdos) - basic_machine=i386-pc - os=msdos - ;; - msys) - basic_machine=i686-pc - os=msys - ;; - mvs) - basic_machine=i370-ibm - os=mvs - ;; - nacl) - basic_machine=le32-unknown - os=nacl - ;; - ncr3000) - basic_machine=i486-ncr - os=sysv4 - ;; - netbsd386) - basic_machine=i386-pc - os=netbsd - ;; - netwinder) - basic_machine=armv4l-rebel - os=linux - ;; - news | news700 | news800 | news900) - basic_machine=m68k-sony - os=newsos - ;; - news1000) - basic_machine=m68030-sony - os=newsos - ;; - necv70) - basic_machine=v70-nec - os=sysv - ;; - nh3000) - basic_machine=m68k-harris - os=cxux - ;; - nh[45]000) - basic_machine=m88k-harris - os=cxux - ;; - nindy960) - basic_machine=i960-intel - os=nindy - ;; - mon960) - basic_machine=i960-intel - os=mon960 - ;; - nonstopux) - basic_machine=mips-compaq - os=nonstopux - ;; - os400) - basic_machine=powerpc-ibm - os=os400 - ;; - OSE68000 | ose68000) - basic_machine=m68000-ericsson - os=ose - ;; - os68k) - basic_machine=m68k-none - os=os68k - ;; - paragon) - basic_machine=i860-intel - os=osf - ;; - parisc) - basic_machine=hppa-unknown - os=linux - ;; - pw32) - basic_machine=i586-unknown - os=pw32 - ;; - rdos | rdos64) - basic_machine=x86_64-pc - os=rdos - ;; - rdos32) - basic_machine=i386-pc - os=rdos - ;; - rom68k) - basic_machine=m68k-rom68k - os=coff - ;; - sa29200) - basic_machine=a29k-amd - os=udi - ;; - sei) - basic_machine=mips-sei - os=seiux - ;; - sequent) - basic_machine=i386-sequent - os= - ;; - sps7) - basic_machine=m68k-bull - os=sysv2 - ;; - st2000) - basic_machine=m68k-tandem - os= - ;; - stratus) - basic_machine=i860-stratus - os=sysv4 - ;; - sun2) - basic_machine=m68000-sun - os= - ;; - sun2os3) - basic_machine=m68000-sun - os=sunos3 - ;; - sun2os4) - basic_machine=m68000-sun - os=sunos4 - ;; - sun3) - basic_machine=m68k-sun - os= - ;; - sun3os3) - basic_machine=m68k-sun - os=sunos3 - ;; - sun3os4) - basic_machine=m68k-sun - os=sunos4 - ;; - sun4) - basic_machine=sparc-sun - os= - ;; - sun4os3) - basic_machine=sparc-sun - os=sunos3 - ;; - sun4os4) - basic_machine=sparc-sun - os=sunos4 - ;; - sun4sol2) - basic_machine=sparc-sun - os=solaris2 - ;; - sun386 | sun386i | roadrunner) - basic_machine=i386-sun - os= - ;; - sv1) - basic_machine=sv1-cray - os=unicos - ;; - symmetry) - basic_machine=i386-sequent - os=dynix - ;; - t3e) - basic_machine=alphaev5-cray - os=unicos - ;; - t90) - basic_machine=t90-cray - os=unicos - ;; - toad1) - basic_machine=pdp10-xkl - os=tops20 - ;; - tpf) - basic_machine=s390x-ibm - os=tpf - ;; - udi29k) - basic_machine=a29k-amd - os=udi - ;; - ultra3) - basic_machine=a29k-nyu - os=sym1 - ;; - v810 | necv810) - basic_machine=v810-nec - os=none - ;; - vaxv) - basic_machine=vax-dec - os=sysv - ;; - vms) - basic_machine=vax-dec - os=vms - ;; - vxworks960) - basic_machine=i960-wrs - os=vxworks - ;; - vxworks68) - basic_machine=m68k-wrs - os=vxworks - ;; - vxworks29k) - basic_machine=a29k-wrs - os=vxworks - ;; - xbox) - basic_machine=i686-pc - os=mingw32 - ;; - ymp) - basic_machine=ymp-cray - os=unicos - ;; - *) - basic_machine=$1 - os= - ;; - esac - ;; -esac - -# Decode 1-component or ad-hoc basic machines -case $basic_machine in - # Here we handle the default manufacturer of certain CPU types. It is in - # some cases the only manufacturer, in others, it is the most popular. - w89k) - cpu=hppa1.1 - vendor=winbond - ;; - op50n) - cpu=hppa1.1 - vendor=oki - ;; - op60c) - cpu=hppa1.1 - vendor=oki - ;; - ibm*) - cpu=i370 - vendor=ibm - ;; - orion105) - cpu=clipper - vendor=highlevel - ;; - mac | mpw | mac-mpw) - cpu=m68k - vendor=apple - ;; - pmac | pmac-mpw) - cpu=powerpc - vendor=apple - ;; - - # Recognize the various machine names and aliases which stand - # for a CPU type and a company and sometimes even an OS. - 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) - cpu=m68000 - vendor=att - ;; - 3b*) - cpu=we32k - vendor=att - ;; - bluegene*) - cpu=powerpc - vendor=ibm - os=cnk - ;; - decsystem10* | dec10*) - cpu=pdp10 - vendor=dec - os=tops10 - ;; - decsystem20* | dec20*) - cpu=pdp10 - vendor=dec - os=tops20 - ;; - delta | 3300 | motorola-3300 | motorola-delta \ - | 3300-motorola | delta-motorola) - cpu=m68k - vendor=motorola - ;; - dpx2*) - cpu=m68k - vendor=bull - os=sysv3 - ;; - encore | umax | mmax) - cpu=ns32k - vendor=encore - ;; - elxsi) - cpu=elxsi - vendor=elxsi - os=${os:-bsd} - ;; - fx2800) - cpu=i860 - vendor=alliant - ;; - genix) - cpu=ns32k - vendor=ns - ;; - h3050r* | hiux*) - cpu=hppa1.1 - vendor=hitachi - os=hiuxwe2 - ;; - hp3k9[0-9][0-9] | hp9[0-9][0-9]) - cpu=hppa1.0 - vendor=hp - ;; - hp9k2[0-9][0-9] | hp9k31[0-9]) - cpu=m68000 - vendor=hp - ;; - hp9k3[2-9][0-9]) - cpu=m68k - vendor=hp - ;; - hp9k6[0-9][0-9] | hp6[0-9][0-9]) - cpu=hppa1.0 - vendor=hp - ;; - hp9k7[0-79][0-9] | hp7[0-79][0-9]) - cpu=hppa1.1 - vendor=hp - ;; - hp9k78[0-9] | hp78[0-9]) - # FIXME: really hppa2.0-hp - cpu=hppa1.1 - vendor=hp - ;; - hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) - # FIXME: really hppa2.0-hp - cpu=hppa1.1 - vendor=hp - ;; - hp9k8[0-9][13679] | hp8[0-9][13679]) - cpu=hppa1.1 - vendor=hp - ;; - hp9k8[0-9][0-9] | hp8[0-9][0-9]) - cpu=hppa1.0 - vendor=hp - ;; - i*86v32) - cpu=`echo "$1" | sed -e 's/86.*/86/'` - vendor=pc - os=sysv32 - ;; - i*86v4*) - cpu=`echo "$1" | sed -e 's/86.*/86/'` - vendor=pc - os=sysv4 - ;; - i*86v) - cpu=`echo "$1" | sed -e 's/86.*/86/'` - vendor=pc - os=sysv - ;; - i*86sol2) - cpu=`echo "$1" | sed -e 's/86.*/86/'` - vendor=pc - os=solaris2 - ;; - j90 | j90-cray) - cpu=j90 - vendor=cray - os=${os:-unicos} - ;; - iris | iris4d) - cpu=mips - vendor=sgi - case $os in - irix*) - ;; - *) - os=irix4 - ;; - esac - ;; - miniframe) - cpu=m68000 - vendor=convergent - ;; - *mint | mint[0-9]* | *MiNT | *MiNT[0-9]*) - cpu=m68k - vendor=atari - os=mint - ;; - news-3600 | risc-news) - cpu=mips - vendor=sony - os=newsos - ;; - next | m*-next) - cpu=m68k - vendor=next - case $os in - openstep*) - ;; - nextstep*) - ;; - ns2*) - os=nextstep2 - ;; - *) - os=nextstep3 - ;; - esac - ;; - np1) - cpu=np1 - vendor=gould - ;; - op50n-* | op60c-*) - cpu=hppa1.1 - vendor=oki - os=proelf - ;; - pa-hitachi) - cpu=hppa1.1 - vendor=hitachi - os=hiuxwe2 - ;; - pbd) - cpu=sparc - vendor=tti - ;; - pbb) - cpu=m68k - vendor=tti - ;; - pc532) - cpu=ns32k - vendor=pc532 - ;; - pn) - cpu=pn - vendor=gould - ;; - power) - cpu=power - vendor=ibm - ;; - ps2) - cpu=i386 - vendor=ibm - ;; - rm[46]00) - cpu=mips - vendor=siemens - ;; - rtpc | rtpc-*) - cpu=romp - vendor=ibm - ;; - sde) - cpu=mipsisa32 - vendor=sde - os=${os:-elf} - ;; - simso-wrs) - cpu=sparclite - vendor=wrs - os=vxworks - ;; - tower | tower-32) - cpu=m68k - vendor=ncr - ;; - vpp*|vx|vx-*) - cpu=f301 - vendor=fujitsu - ;; - w65) - cpu=w65 - vendor=wdc - ;; - w89k-*) - cpu=hppa1.1 - vendor=winbond - os=proelf - ;; - none) - cpu=none - vendor=none - ;; - leon|leon[3-9]) - cpu=sparc - vendor=$basic_machine - ;; - leon-*|leon[3-9]-*) - cpu=sparc - vendor=`echo "$basic_machine" | sed 's/-.*//'` - ;; - - *-*) - # shellcheck disable=SC2162 - IFS="-" read cpu vendor <&2 - exit 1 - ;; - esac - ;; -esac - -# Here we canonicalize certain aliases for manufacturers. -case $vendor in - digital*) - vendor=dec - ;; - commodore*) - vendor=cbm - ;; - *) - ;; -esac - -# Decode manufacturer-specific aliases for certain operating systems. - -if [ x$os != x ] -then -case $os in - # First match some system type aliases that might get confused - # with valid system types. - # solaris* is a basic system type, with this one exception. - auroraux) - os=auroraux - ;; - bluegene*) - os=cnk - ;; - solaris1 | solaris1.*) - os=`echo $os | sed -e 's|solaris1|sunos4|'` - ;; - solaris) - os=solaris2 - ;; - unixware*) - os=sysv4.2uw - ;; - gnu/linux*) - os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` - ;; - # es1800 is here to avoid being matched by es* (a different OS) - es1800*) - os=ose - ;; - # Some version numbers need modification - chorusos*) - os=chorusos - ;; - isc) - os=isc2.2 - ;; - sco6) - os=sco5v6 - ;; - sco5) - os=sco3.2v5 - ;; - sco4) - os=sco3.2v4 - ;; - sco3.2.[4-9]*) - os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` - ;; - sco3.2v[4-9]* | sco5v6*) - # Don't forget version if it is 3.2v4 or newer. - ;; - scout) - # Don't match below - ;; - sco*) - os=sco3.2v2 - ;; - psos*) - os=psos - ;; - # Now accept the basic system types. - # The portable systems comes first. - # Each alternative MUST end in a * to match a version number. - # sysv* is not here because it comes later, after sysvr4. - gnu* | bsd* | mach* | minix* | genix* | ultrix* | irix* \ - | *vms* | esix* | aix* | cnk* | sunos | sunos[34]*\ - | hpux* | unos* | osf* | luna* | dgux* | auroraux* | solaris* \ - | sym* | kopensolaris* | plan9* \ - | amigaos* | amigados* | msdos* | newsos* | unicos* | aof* \ - | aos* | aros* | cloudabi* | sortix* \ - | nindy* | vxsim* | vxworks* | ebmon* | hms* | mvs* \ - | clix* | riscos* | uniplus* | iris* | isc* | rtu* | xenix* \ - | knetbsd* | mirbsd* | netbsd* \ - | bitrig* | openbsd* | solidbsd* | libertybsd* \ - | ekkobsd* | kfreebsd* | freebsd* | riscix* | lynxos* \ - | bosx* | nextstep* | cxux* | aout* | elf* | oabi* \ - | ptx* | coff* | ecoff* | winnt* | domain* | vsta* \ - | udi* | eabi* | lites* | ieee* | go32* | aux* | hcos* \ - | chorusrdb* | cegcc* | glidix* \ - | cygwin* | msys* | pe* | moss* | proelf* | rtems* \ - | midipix* | mingw32* | mingw64* | linux-gnu* | linux-android* \ - | linux-newlib* | linux-musl* | linux-uclibc* \ - | uxpv* | beos* | mpeix* | udk* | moxiebox* \ - | interix* | uwin* | mks* | rhapsody* | darwin* \ - | openstep* | oskit* | conix* | pw32* | nonstopux* \ - | storm-chaos* | tops10* | tenex* | tops20* | its* \ - | os2* | vos* | palmos* | uclinux* | nucleus* \ - | morphos* | superux* | rtmk* | windiss* \ - | powermax* | dnix* | nx6 | nx7 | sei* | dragonfly* \ - | skyos* | haiku* | rdos* | toppers* | drops* | es* \ - | onefs* | tirtos* | phoenix* | fuchsia* | redox* | bme* \ - | midnightbsd* | amdhsa* | unleashed* | emscripten*) - # Remember, each alternative MUST END IN *, to match a version number. - ;; - qnx*) - case $cpu in - x86 | i*86) - ;; - *) - os=nto-$os - ;; - esac - ;; - hiux*) - os=hiuxwe2 - ;; - nto-qnx*) - ;; - nto*) - os=`echo $os | sed -e 's|nto|nto-qnx|'` - ;; - sim | xray | os68k* | v88r* \ - | windows* | osx | abug | netware* | os9* \ - | macos* | mpw* | magic* | mmixware* | mon960* | lnews*) - ;; - linux-dietlibc) - os=linux-dietlibc - ;; - linux*) - os=`echo $os | sed -e 's|linux|linux-gnu|'` - ;; - lynx*178) - os=lynxos178 - ;; - lynx*5) - os=lynxos5 - ;; - lynx*) - os=lynxos - ;; - mac*) - os=`echo "$os" | sed -e 's|mac|macos|'` - ;; - opened*) - os=openedition - ;; - os400*) - os=os400 - ;; - sunos5*) - os=`echo "$os" | sed -e 's|sunos5|solaris2|'` - ;; - sunos6*) - os=`echo "$os" | sed -e 's|sunos6|solaris3|'` - ;; - wince*) - os=wince - ;; - utek*) - os=bsd - ;; - dynix*) - os=bsd - ;; - acis*) - os=aos - ;; - atheos*) - os=atheos - ;; - syllable*) - os=syllable - ;; - 386bsd) - os=bsd - ;; - ctix* | uts*) - os=sysv - ;; - nova*) - os=rtmk-nova - ;; - ns2) - os=nextstep2 - ;; - nsk*) - os=nsk - ;; - # Preserve the version number of sinix5. - sinix5.*) - os=`echo $os | sed -e 's|sinix|sysv|'` - ;; - sinix*) - os=sysv4 - ;; - tpf*) - os=tpf - ;; - triton*) - os=sysv3 - ;; - oss*) - os=sysv3 - ;; - svr4*) - os=sysv4 - ;; - svr3) - os=sysv3 - ;; - sysvr4) - os=sysv4 - ;; - # This must come after sysvr4. - sysv*) - ;; - ose*) - os=ose - ;; - *mint | mint[0-9]* | *MiNT | MiNT[0-9]*) - os=mint - ;; - zvmoe) - os=zvmoe - ;; - dicos*) - os=dicos - ;; - pikeos*) - # Until real need of OS specific support for - # particular features comes up, bare metal - # configurations are quite functional. - case $cpu in - arm*) - os=eabi - ;; - *) - os=elf - ;; - esac - ;; - nacl*) - ;; - ios) - ;; - none) - ;; - *-eabi) - ;; - *) - echo Invalid configuration \`"$1"\': system \`"$os"\' not recognized 1>&2 - exit 1 - ;; -esac -else - -# Here we handle the default operating systems that come with various machines. -# The value should be what the vendor currently ships out the door with their -# machine or put another way, the most popular os provided with the machine. - -# Note that if you're going to try to match "-MANUFACTURER" here (say, -# "-sun"), then you have to tell the case statement up towards the top -# that MANUFACTURER isn't an operating system. Otherwise, code above -# will signal an error saying that MANUFACTURER isn't an operating -# system, and we'll never get to this point. - -case $cpu-$vendor in - score-*) - os=elf - ;; - spu-*) - os=elf - ;; - *-acorn) - os=riscix1.2 - ;; - arm*-rebel) - os=linux - ;; - arm*-semi) - os=aout - ;; - c4x-* | tic4x-*) - os=coff - ;; - c8051-*) - os=elf - ;; - clipper-intergraph) - os=clix - ;; - hexagon-*) - os=elf - ;; - tic54x-*) - os=coff - ;; - tic55x-*) - os=coff - ;; - tic6x-*) - os=coff - ;; - # This must come before the *-dec entry. - pdp10-*) - os=tops20 - ;; - pdp11-*) - os=none - ;; - *-dec | vax-*) - os=ultrix4.2 - ;; - m68*-apollo) - os=domain - ;; - i386-sun) - os=sunos4.0.2 - ;; - m68000-sun) - os=sunos3 - ;; - m68*-cisco) - os=aout - ;; - mep-*) - os=elf - ;; - mips*-cisco) - os=elf - ;; - mips*-*) - os=elf - ;; - or32-*) - os=coff - ;; - *-tti) # must be before sparc entry or we get the wrong os. - os=sysv3 - ;; - sparc-* | *-sun) - os=sunos4.1.1 - ;; - pru-*) - os=elf - ;; - *-be) - os=beos - ;; - *-ibm) - os=aix - ;; - *-knuth) - os=mmixware - ;; - *-wec) - os=proelf - ;; - *-winbond) - os=proelf - ;; - *-oki) - os=proelf - ;; - *-hp) - os=hpux - ;; - *-hitachi) - os=hiux - ;; - i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) - os=sysv - ;; - *-cbm) - os=amigaos - ;; - *-dg) - os=dgux - ;; - *-dolphin) - os=sysv3 - ;; - m68k-ccur) - os=rtu - ;; - m88k-omron*) - os=luna - ;; - *-next) - os=nextstep - ;; - *-sequent) - os=ptx - ;; - *-crds) - os=unos - ;; - *-ns) - os=genix - ;; - i370-*) - os=mvs - ;; - *-gould) - os=sysv - ;; - *-highlevel) - os=bsd - ;; - *-encore) - os=bsd - ;; - *-sgi) - os=irix - ;; - *-siemens) - os=sysv4 - ;; - *-masscomp) - os=rtu - ;; - f30[01]-fujitsu | f700-fujitsu) - os=uxpv - ;; - *-rom68k) - os=coff - ;; - *-*bug) - os=coff - ;; - *-apple) - os=macos - ;; - *-atari*) - os=mint - ;; - *-wrs) - os=vxworks - ;; - *) - os=none - ;; -esac -fi - -# Here we handle the case where we know the os, and the CPU type, but not the -# manufacturer. We pick the logical manufacturer. -case $vendor in - unknown) - case $os in - riscix*) - vendor=acorn - ;; - sunos*) - vendor=sun - ;; - cnk*|-aix*) - vendor=ibm - ;; - beos*) - vendor=be - ;; - hpux*) - vendor=hp - ;; - mpeix*) - vendor=hp - ;; - hiux*) - vendor=hitachi - ;; - unos*) - vendor=crds - ;; - dgux*) - vendor=dg - ;; - luna*) - vendor=omron - ;; - genix*) - vendor=ns - ;; - clix*) - vendor=intergraph - ;; - mvs* | opened*) - vendor=ibm - ;; - os400*) - vendor=ibm - ;; - ptx*) - vendor=sequent - ;; - tpf*) - vendor=ibm - ;; - vxsim* | vxworks* | windiss*) - vendor=wrs - ;; - aux*) - vendor=apple - ;; - hms*) - vendor=hitachi - ;; - mpw* | macos*) - vendor=apple - ;; - *mint | mint[0-9]* | *MiNT | MiNT[0-9]*) - vendor=atari - ;; - vos*) - vendor=stratus - ;; - esac - ;; -esac - -echo "$cpu-$vendor-$os" -exit - -# Local variables: -# eval: (add-hook 'before-save-hook 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/bin/install-sh b/bin/install-sh deleted file mode 100755 index 501e70986..000000000 --- a/bin/install-sh +++ /dev/null @@ -1,239 +0,0 @@ -#! /bin/sh -# -# install - install a program, script, or datafile -# This comes from X11R5. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. -# - - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" - -transformbasename="" -transform_arg="" -instcmd="$mvprog" -chmodcmd="$chmodprog 0755" -chowncmd="" -chgrpcmd="" -stripcmd="" -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src="" -dst="" -dir_arg="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd="$cpprog" - shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd="$stripprog" - shift - continue;; - - -t=*) transformarg=`echo $1 | sed 's/-t=//'` - shift - continue;; - - -b=*) transformbasename=`echo $1 | sed 's/-b=//'` - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; - esac -done - -if [ x"$src" = x ] -then - echo "install: no input file specified" - exit 1 -else - true -fi - -if [ x"$dir_arg" != x ]; then - dst=$src - src="" - - if [ -d $dst ]; then - instcmd=: - else - instcmd=mkdir - fi -else - -# Waiting for this to be detected by the "$instcmd $src $dsttmp" command -# might cause directories to be created, which would be especially bad -# if $src (and thus $dsttmp) contains '*'. - - if [ -f $src -o -d $src ] - then - true - else - echo "install: $src does not exist" - exit 1 - fi - - if [ x"$dst" = x ] - then - echo "install: no destination specified" - exit 1 - else - true - fi - -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic - - if [ -d $dst ] - then - dst="$dst"/`basename $src` - else - true - fi -fi - -## this sed command emulates the dirname command -dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` - -# Make sure that the destination directory exists. -# this part is taken from Noah Friedman's mkinstalldirs script - -# Skip lots of stat calls in the usual case. -if [ ! -d "$dstdir" ]; then -defaultIFS=' -' -IFS="${IFS-${defaultIFS}}" - -oIFS="${IFS}" -# Some sh's can't handle IFS=/ for some reason. -IFS='%' -set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` -IFS="${oIFS}" - -pathcomp='' - -while [ $# -ne 0 ] ; do - pathcomp="${pathcomp}${1}" - shift - - if [ ! -d "${pathcomp}" ] ; - then - $mkdirprog "${pathcomp}" - else - true - fi - - pathcomp="${pathcomp}/" -done -fi - -if [ x"$dir_arg" != x ] -then - $doit $instcmd $dst && - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi -else - -# If we're going to rename the final executable, determine the name now. - - if [ x"$transformarg" = x ] - then - dstfile=`basename $dst` - else - dstfile=`basename $dst $transformbasename | - sed $transformarg`$transformbasename - fi - -# don't allow the sed command to completely eliminate the filename - - if [ x"$dstfile" = x ] - then - dstfile=`basename $dst` - else - true - fi - -# Make a temp file name in the proper directory. - - dsttmp=$dstdir/#inst.$$# - -# Move or copy the file name to the temp name - - $doit $instcmd $src $dsttmp && - - trap "rm -f ${dsttmp}" 0 && - -# and set any options; do chmod last to preserve setuid bits - -# If any of these fail, we abort the whole thing. If we want to -# ignore errors from any of these, just make sure not to ignore -# errors from the above "$doit $instcmd $src $dsttmp" command. - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && - -# Now rename the file to the real destination. - - $doit $rmcmd -f $dstdir/$dstfile && - $doit $mvcmd $dsttmp $dstdir/$dstfile - -fi && - - -exit 0 - diff --git a/bin/ltmain.sh b/bin/ltmain.sh deleted file mode 100644 index 0f0a2da3f..000000000 --- a/bin/ltmain.sh +++ /dev/null @@ -1,11147 +0,0 @@ -#! /bin/sh -## DO NOT EDIT - This file generated from ./build-aux/ltmain.in -## by inline-source v2014-01-03.01 - -# libtool (GNU libtool) 2.4.6 -# Provide generalized library-building support services. -# Written by Gordon Matzigkeit , 1996 - -# Copyright (C) 1996-2015 Free Software Foundation, Inc. -# This is free software; see the source for copying conditions. There is NO -# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -# GNU Libtool is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - - -PROGRAM=libtool -PACKAGE=libtool -VERSION=2.4.6 -package_revision=2.4.6 - - -## ------ ## -## Usage. ## -## ------ ## - -# Run './libtool --help' for help with using this script from the -# command line. - - -## ------------------------------- ## -## User overridable command paths. ## -## ------------------------------- ## - -# After configure completes, it has a better idea of some of the -# shell tools we need than the defaults used by the functions shared -# with bootstrap, so set those here where they can still be over- -# ridden by the user, but otherwise take precedence. - -: ${AUTOCONF="autoconf"} -: ${AUTOMAKE="automake"} - - -## -------------------------- ## -## Source external libraries. ## -## -------------------------- ## - -# Much of our low-level functionality needs to be sourced from external -# libraries, which are installed to $pkgauxdir. - -# Set a version string for this script. -scriptversion=2015-01-20.17; # UTC - -# General shell script boiler plate, and helper functions. -# Written by Gary V. Vaughan, 2004 - -# Copyright (C) 2004-2015 Free Software Foundation, Inc. -# This is free software; see the source for copying conditions. There is NO -# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. - -# As a special exception to the GNU General Public License, if you distribute -# this file as part of a program or library that is built using GNU Libtool, -# you may include this file under the same distribution terms that you use -# for the rest of that program. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# Please report bugs or propose patches to gary@gnu.org. - - -## ------ ## -## Usage. ## -## ------ ## - -# Evaluate this file near the top of your script to gain access to -# the functions and variables defined here: -# -# . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh -# -# If you need to override any of the default environment variable -# settings, do that before evaluating this file. - - -## -------------------- ## -## Shell normalisation. ## -## -------------------- ## - -# Some shells need a little help to be as Bourne compatible as possible. -# Before doing anything else, make sure all that help has been provided! - -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac -fi - -# NLS nuisances: We save the old values in case they are required later. -_G_user_locale= -_G_safe_locale= -for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES -do - eval "if test set = \"\${$_G_var+set}\"; then - save_$_G_var=\$$_G_var - $_G_var=C - export $_G_var - _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\" - _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\" - fi" -done - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -# Make sure IFS has a sensible default -sp=' ' -nl=' -' -IFS="$sp $nl" - -# There are apparently some retarded systems that use ';' as a PATH separator! -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - - -## ------------------------- ## -## Locate command utilities. ## -## ------------------------- ## - - -# func_executable_p FILE -# ---------------------- -# Check that FILE is an executable regular file. -func_executable_p () -{ - test -f "$1" && test -x "$1" -} - - -# func_path_progs PROGS_LIST CHECK_FUNC [PATH] -# -------------------------------------------- -# Search for either a program that responds to --version with output -# containing "GNU", or else returned by CHECK_FUNC otherwise, by -# trying all the directories in PATH with each of the elements of -# PROGS_LIST. -# -# CHECK_FUNC should accept the path to a candidate program, and -# set $func_check_prog_result if it truncates its output less than -# $_G_path_prog_max characters. -func_path_progs () -{ - _G_progs_list=$1 - _G_check_func=$2 - _G_PATH=${3-"$PATH"} - - _G_path_prog_max=0 - _G_path_prog_found=false - _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:} - for _G_dir in $_G_PATH; do - IFS=$_G_save_IFS - test -z "$_G_dir" && _G_dir=. - for _G_prog_name in $_G_progs_list; do - for _exeext in '' .EXE; do - _G_path_prog=$_G_dir/$_G_prog_name$_exeext - func_executable_p "$_G_path_prog" || continue - case `"$_G_path_prog" --version 2>&1` in - *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;; - *) $_G_check_func $_G_path_prog - func_path_progs_result=$func_check_prog_result - ;; - esac - $_G_path_prog_found && break 3 - done - done - done - IFS=$_G_save_IFS - test -z "$func_path_progs_result" && { - echo "no acceptable sed could be found in \$PATH" >&2 - exit 1 - } -} - - -# We want to be able to use the functions in this file before configure -# has figured out where the best binaries are kept, which means we have -# to search for them ourselves - except when the results are already set -# where we skip the searches. - -# Unless the user overrides by setting SED, search the path for either GNU -# sed, or the sed that truncates its output the least. -test -z "$SED" && { - _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ - for _G_i in 1 2 3 4 5 6 7; do - _G_sed_script=$_G_sed_script$nl$_G_sed_script - done - echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed - _G_sed_script= - - func_check_prog_sed () - { - _G_path_prog=$1 - - _G_count=0 - printf 0123456789 >conftest.in - while : - do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo '' >> conftest.nl - "$_G_path_prog" -f conftest.sed conftest.out 2>/dev/null || break - diff conftest.out conftest.nl >/dev/null 2>&1 || break - _G_count=`expr $_G_count + 1` - if test "$_G_count" -gt "$_G_path_prog_max"; then - # Best one so far, save it but keep looking for a better one - func_check_prog_result=$_G_path_prog - _G_path_prog_max=$_G_count - fi - # 10*(2^10) chars as input seems more than enough - test 10 -lt "$_G_count" && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out - } - - func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin - rm -f conftest.sed - SED=$func_path_progs_result -} - - -# Unless the user overrides by setting GREP, search the path for either GNU -# grep, or the grep that truncates its output the least. -test -z "$GREP" && { - func_check_prog_grep () - { - _G_path_prog=$1 - - _G_count=0 - _G_path_prog_max=0 - printf 0123456789 >conftest.in - while : - do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo 'GREP' >> conftest.nl - "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' conftest.out 2>/dev/null || break - diff conftest.out conftest.nl >/dev/null 2>&1 || break - _G_count=`expr $_G_count + 1` - if test "$_G_count" -gt "$_G_path_prog_max"; then - # Best one so far, save it but keep looking for a better one - func_check_prog_result=$_G_path_prog - _G_path_prog_max=$_G_count - fi - # 10*(2^10) chars as input seems more than enough - test 10 -lt "$_G_count" && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out - } - - func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin - GREP=$func_path_progs_result -} - - -## ------------------------------- ## -## User overridable command paths. ## -## ------------------------------- ## - -# All uppercase variable names are used for environment variables. These -# variables can be overridden by the user before calling a script that -# uses them if a suitable command of that name is not already available -# in the command search PATH. - -: ${CP="cp -f"} -: ${ECHO="printf %s\n"} -: ${EGREP="$GREP -E"} -: ${FGREP="$GREP -F"} -: ${LN_S="ln -s"} -: ${MAKE="make"} -: ${MKDIR="mkdir"} -: ${MV="mv -f"} -: ${RM="rm -f"} -: ${SHELL="${CONFIG_SHELL-/bin/sh}"} - - -## -------------------- ## -## Useful sed snippets. ## -## -------------------- ## - -sed_dirname='s|/[^/]*$||' -sed_basename='s|^.*/||' - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -sed_quote_subst='s|\([`"$\\]\)|\\\1|g' - -# Same as above, but do not quote variable references. -sed_double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Sed substitution that turns a string into a regex matching for the -# string literally. -sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g' - -# Sed substitution that converts a w32 file name or path -# that contains forward slashes, into one that contains -# (escaped) backslashes. A very naive implementation. -sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' - -# Re-'\' parameter expansions in output of sed_double_quote_subst that -# were '\'-ed in input to the same. If an odd number of '\' preceded a -# '$' in input to sed_double_quote_subst, that '$' was protected from -# expansion. Since each input '\' is now two '\'s, look for any number -# of runs of four '\'s followed by two '\'s and then a '$'. '\' that '$'. -_G_bs='\\' -_G_bs2='\\\\' -_G_bs4='\\\\\\\\' -_G_dollar='\$' -sed_double_backslash="\ - s/$_G_bs4/&\\ -/g - s/^$_G_bs2$_G_dollar/$_G_bs&/ - s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g - s/\n//g" - - -## ----------------- ## -## Global variables. ## -## ----------------- ## - -# Except for the global variables explicitly listed below, the following -# functions in the '^func_' namespace, and the '^require_' namespace -# variables initialised in the 'Resource management' section, sourcing -# this file will not pollute your global namespace with anything -# else. There's no portable way to scope variables in Bourne shell -# though, so actually running these functions will sometimes place -# results into a variable named after the function, and often use -# temporary variables in the '^_G_' namespace. If you are careful to -# avoid using those namespaces casually in your sourcing script, things -# should continue to work as you expect. And, of course, you can freely -# overwrite any of the functions or variables defined here before -# calling anything to customize them. - -EXIT_SUCCESS=0 -EXIT_FAILURE=1 -EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. -EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. - -# Allow overriding, eg assuming that you follow the convention of -# putting '$debug_cmd' at the start of all your functions, you can get -# bash to show function call trace with: -# -# debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name -debug_cmd=${debug_cmd-":"} -exit_cmd=: - -# By convention, finish your script with: -# -# exit $exit_status -# -# so that you can set exit_status to non-zero if you want to indicate -# something went wrong during execution without actually bailing out at -# the point of failure. -exit_status=$EXIT_SUCCESS - -# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh -# is ksh but when the shell is invoked as "sh" and the current value of -# the _XPG environment variable is not equal to 1 (one), the special -# positional parameter $0, within a function call, is the name of the -# function. -progpath=$0 - -# The name of this program. -progname=`$ECHO "$progpath" |$SED "$sed_basename"` - -# Make sure we have an absolute progpath for reexecution: -case $progpath in - [\\/]*|[A-Za-z]:\\*) ;; - *[\\/]*) - progdir=`$ECHO "$progpath" |$SED "$sed_dirname"` - progdir=`cd "$progdir" && pwd` - progpath=$progdir/$progname - ;; - *) - _G_IFS=$IFS - IFS=${PATH_SEPARATOR-:} - for progdir in $PATH; do - IFS=$_G_IFS - test -x "$progdir/$progname" && break - done - IFS=$_G_IFS - test -n "$progdir" || progdir=`pwd` - progpath=$progdir/$progname - ;; -esac - - -## ----------------- ## -## Standard options. ## -## ----------------- ## - -# The following options affect the operation of the functions defined -# below, and should be set appropriately depending on run-time para- -# meters passed on the command line. - -opt_dry_run=false -opt_quiet=false -opt_verbose=false - -# Categories 'all' and 'none' are always available. Append any others -# you will pass as the first argument to func_warning from your own -# code. -warning_categories= - -# By default, display warnings according to 'opt_warning_types'. Set -# 'warning_func' to ':' to elide all warnings, or func_fatal_error to -# treat the next displayed warning as a fatal error. -warning_func=func_warn_and_continue - -# Set to 'all' to display all warnings, 'none' to suppress all -# warnings, or a space delimited list of some subset of -# 'warning_categories' to display only the listed warnings. -opt_warning_types=all - - -## -------------------- ## -## Resource management. ## -## -------------------- ## - -# This section contains definitions for functions that each ensure a -# particular resource (a file, or a non-empty configuration variable for -# example) is available, and if appropriate to extract default values -# from pertinent package files. Call them using their associated -# 'require_*' variable to ensure that they are executed, at most, once. -# -# It's entirely deliberate that calling these functions can set -# variables that don't obey the namespace limitations obeyed by the rest -# of this file, in order that that they be as useful as possible to -# callers. - - -# require_term_colors -# ------------------- -# Allow display of bold text on terminals that support it. -require_term_colors=func_require_term_colors -func_require_term_colors () -{ - $debug_cmd - - test -t 1 && { - # COLORTERM and USE_ANSI_COLORS environment variables take - # precedence, because most terminfo databases neglect to describe - # whether color sequences are supported. - test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"} - - if test 1 = "$USE_ANSI_COLORS"; then - # Standard ANSI escape sequences - tc_reset='' - tc_bold=''; tc_standout='' - tc_red=''; tc_green='' - tc_blue=''; tc_cyan='' - else - # Otherwise trust the terminfo database after all. - test -n "`tput sgr0 2>/dev/null`" && { - tc_reset=`tput sgr0` - test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold` - tc_standout=$tc_bold - test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso` - test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1` - test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2` - test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4` - test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5` - } - fi - } - - require_term_colors=: -} - - -## ----------------- ## -## Function library. ## -## ----------------- ## - -# This section contains a variety of useful functions to call in your -# scripts. Take note of the portable wrappers for features provided by -# some modern shells, which will fall back to slower equivalents on -# less featureful shells. - - -# func_append VAR VALUE -# --------------------- -# Append VALUE onto the existing contents of VAR. - - # We should try to minimise forks, especially on Windows where they are - # unreasonably slow, so skip the feature probes when bash or zsh are - # being used: - if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then - : ${_G_HAVE_ARITH_OP="yes"} - : ${_G_HAVE_XSI_OPS="yes"} - # The += operator was introduced in bash 3.1 - case $BASH_VERSION in - [12].* | 3.0 | 3.0*) ;; - *) - : ${_G_HAVE_PLUSEQ_OP="yes"} - ;; - esac - fi - - # _G_HAVE_PLUSEQ_OP - # Can be empty, in which case the shell is probed, "yes" if += is - # useable or anything else if it does not work. - test -z "$_G_HAVE_PLUSEQ_OP" \ - && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \ - && _G_HAVE_PLUSEQ_OP=yes - -if test yes = "$_G_HAVE_PLUSEQ_OP" -then - # This is an XSI compatible shell, allowing a faster implementation... - eval 'func_append () - { - $debug_cmd - - eval "$1+=\$2" - }' -else - # ...otherwise fall back to using expr, which is often a shell builtin. - func_append () - { - $debug_cmd - - eval "$1=\$$1\$2" - } -fi - - -# func_append_quoted VAR VALUE -# ---------------------------- -# Quote VALUE and append to the end of shell variable VAR, separated -# by a space. -if test yes = "$_G_HAVE_PLUSEQ_OP"; then - eval 'func_append_quoted () - { - $debug_cmd - - func_quote_for_eval "$2" - eval "$1+=\\ \$func_quote_for_eval_result" - }' -else - func_append_quoted () - { - $debug_cmd - - func_quote_for_eval "$2" - eval "$1=\$$1\\ \$func_quote_for_eval_result" - } -fi - - -# func_append_uniq VAR VALUE -# -------------------------- -# Append unique VALUE onto the existing contents of VAR, assuming -# entries are delimited by the first character of VALUE. For example: -# -# func_append_uniq options " --another-option option-argument" -# -# will only append to $options if " --another-option option-argument " -# is not already present somewhere in $options already (note spaces at -# each end implied by leading space in second argument). -func_append_uniq () -{ - $debug_cmd - - eval _G_current_value='`$ECHO $'$1'`' - _G_delim=`expr "$2" : '\(.\)'` - - case $_G_delim$_G_current_value$_G_delim in - *"$2$_G_delim"*) ;; - *) func_append "$@" ;; - esac -} - - -# func_arith TERM... -# ------------------ -# Set func_arith_result to the result of evaluating TERMs. - test -z "$_G_HAVE_ARITH_OP" \ - && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \ - && _G_HAVE_ARITH_OP=yes - -if test yes = "$_G_HAVE_ARITH_OP"; then - eval 'func_arith () - { - $debug_cmd - - func_arith_result=$(( $* )) - }' -else - func_arith () - { - $debug_cmd - - func_arith_result=`expr "$@"` - } -fi - - -# func_basename FILE -# ------------------ -# Set func_basename_result to FILE with everything up to and including -# the last / stripped. -if test yes = "$_G_HAVE_XSI_OPS"; then - # If this shell supports suffix pattern removal, then use it to avoid - # forking. Hide the definitions single quotes in case the shell chokes - # on unsupported syntax... - _b='func_basename_result=${1##*/}' - _d='case $1 in - */*) func_dirname_result=${1%/*}$2 ;; - * ) func_dirname_result=$3 ;; - esac' - -else - # ...otherwise fall back to using sed. - _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`' - _d='func_dirname_result=`$ECHO "$1" |$SED "$sed_dirname"` - if test "X$func_dirname_result" = "X$1"; then - func_dirname_result=$3 - else - func_append func_dirname_result "$2" - fi' -fi - -eval 'func_basename () -{ - $debug_cmd - - '"$_b"' -}' - - -# func_dirname FILE APPEND NONDIR_REPLACEMENT -# ------------------------------------------- -# Compute the dirname of FILE. If nonempty, add APPEND to the result, -# otherwise set result to NONDIR_REPLACEMENT. -eval 'func_dirname () -{ - $debug_cmd - - '"$_d"' -}' - - -# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT -# -------------------------------------------------------- -# Perform func_basename and func_dirname in a single function -# call: -# dirname: Compute the dirname of FILE. If nonempty, -# add APPEND to the result, otherwise set result -# to NONDIR_REPLACEMENT. -# value returned in "$func_dirname_result" -# basename: Compute filename of FILE. -# value retuned in "$func_basename_result" -# For efficiency, we do not delegate to the functions above but instead -# duplicate the functionality here. -eval 'func_dirname_and_basename () -{ - $debug_cmd - - '"$_b"' - '"$_d"' -}' - - -# func_echo ARG... -# ---------------- -# Echo program name prefixed message. -func_echo () -{ - $debug_cmd - - _G_message=$* - - func_echo_IFS=$IFS - IFS=$nl - for _G_line in $_G_message; do - IFS=$func_echo_IFS - $ECHO "$progname: $_G_line" - done - IFS=$func_echo_IFS -} - - -# func_echo_all ARG... -# -------------------- -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "$*" -} - - -# func_echo_infix_1 INFIX ARG... -# ------------------------------ -# Echo program name, followed by INFIX on the first line, with any -# additional lines not showing INFIX. -func_echo_infix_1 () -{ - $debug_cmd - - $require_term_colors - - _G_infix=$1; shift - _G_indent=$_G_infix - _G_prefix="$progname: $_G_infix: " - _G_message=$* - - # Strip color escape sequences before counting printable length - for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan" - do - test -n "$_G_tc" && { - _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"` - _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"` - } - done - _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`" " ## exclude from sc_prohibit_nested_quotes - - func_echo_infix_1_IFS=$IFS - IFS=$nl - for _G_line in $_G_message; do - IFS=$func_echo_infix_1_IFS - $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2 - _G_prefix=$_G_indent - done - IFS=$func_echo_infix_1_IFS -} - - -# func_error ARG... -# ----------------- -# Echo program name prefixed message to standard error. -func_error () -{ - $debug_cmd - - $require_term_colors - - func_echo_infix_1 " $tc_standout${tc_red}error$tc_reset" "$*" >&2 -} - - -# func_fatal_error ARG... -# ----------------------- -# Echo program name prefixed message to standard error, and exit. -func_fatal_error () -{ - $debug_cmd - - func_error "$*" - exit $EXIT_FAILURE -} - - -# func_grep EXPRESSION FILENAME -# ----------------------------- -# Check whether EXPRESSION matches any line of FILENAME, without output. -func_grep () -{ - $debug_cmd - - $GREP "$1" "$2" >/dev/null 2>&1 -} - - -# func_len STRING -# --------------- -# Set func_len_result to the length of STRING. STRING may not -# start with a hyphen. - test -z "$_G_HAVE_XSI_OPS" \ - && (eval 'x=a/b/c; - test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \ - && _G_HAVE_XSI_OPS=yes - -if test yes = "$_G_HAVE_XSI_OPS"; then - eval 'func_len () - { - $debug_cmd - - func_len_result=${#1} - }' -else - func_len () - { - $debug_cmd - - func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` - } -fi - - -# func_mkdir_p DIRECTORY-PATH -# --------------------------- -# Make sure the entire path to DIRECTORY-PATH is available. -func_mkdir_p () -{ - $debug_cmd - - _G_directory_path=$1 - _G_dir_list= - - if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then - - # Protect directory names starting with '-' - case $_G_directory_path in - -*) _G_directory_path=./$_G_directory_path ;; - esac - - # While some portion of DIR does not yet exist... - while test ! -d "$_G_directory_path"; do - # ...make a list in topmost first order. Use a colon delimited - # list incase some portion of path contains whitespace. - _G_dir_list=$_G_directory_path:$_G_dir_list - - # If the last portion added has no slash in it, the list is done - case $_G_directory_path in */*) ;; *) break ;; esac - - # ...otherwise throw away the child directory and loop - _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"` - done - _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'` - - func_mkdir_p_IFS=$IFS; IFS=: - for _G_dir in $_G_dir_list; do - IFS=$func_mkdir_p_IFS - # mkdir can fail with a 'File exist' error if two processes - # try to create one of the directories concurrently. Don't - # stop in that case! - $MKDIR "$_G_dir" 2>/dev/null || : - done - IFS=$func_mkdir_p_IFS - - # Bail out if we (or some other process) failed to create a directory. - test -d "$_G_directory_path" || \ - func_fatal_error "Failed to create '$1'" - fi -} - - -# func_mktempdir [BASENAME] -# ------------------------- -# Make a temporary directory that won't clash with other running -# libtool processes, and avoids race conditions if possible. If -# given, BASENAME is the basename for that directory. -func_mktempdir () -{ - $debug_cmd - - _G_template=${TMPDIR-/tmp}/${1-$progname} - - if test : = "$opt_dry_run"; then - # Return a directory name, but don't create it in dry-run mode - _G_tmpdir=$_G_template-$$ - else - - # If mktemp works, use that first and foremost - _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null` - - if test ! -d "$_G_tmpdir"; then - # Failing that, at least try and use $RANDOM to avoid a race - _G_tmpdir=$_G_template-${RANDOM-0}$$ - - func_mktempdir_umask=`umask` - umask 0077 - $MKDIR "$_G_tmpdir" - umask $func_mktempdir_umask - fi - - # If we're not in dry-run mode, bomb out on failure - test -d "$_G_tmpdir" || \ - func_fatal_error "cannot create temporary directory '$_G_tmpdir'" - fi - - $ECHO "$_G_tmpdir" -} - - -# func_normal_abspath PATH -# ------------------------ -# Remove doubled-up and trailing slashes, "." path components, -# and cancel out any ".." path components in PATH after making -# it an absolute path. -func_normal_abspath () -{ - $debug_cmd - - # These SED scripts presuppose an absolute path with a trailing slash. - _G_pathcar='s|^/\([^/]*\).*$|\1|' - _G_pathcdr='s|^/[^/]*||' - _G_removedotparts=':dotsl - s|/\./|/|g - t dotsl - s|/\.$|/|' - _G_collapseslashes='s|/\{1,\}|/|g' - _G_finalslash='s|/*$|/|' - - # Start from root dir and reassemble the path. - func_normal_abspath_result= - func_normal_abspath_tpath=$1 - func_normal_abspath_altnamespace= - case $func_normal_abspath_tpath in - "") - # Empty path, that just means $cwd. - func_stripname '' '/' "`pwd`" - func_normal_abspath_result=$func_stripname_result - return - ;; - # The next three entries are used to spot a run of precisely - # two leading slashes without using negated character classes; - # we take advantage of case's first-match behaviour. - ///*) - # Unusual form of absolute path, do nothing. - ;; - //*) - # Not necessarily an ordinary path; POSIX reserves leading '//' - # and for example Cygwin uses it to access remote file shares - # over CIFS/SMB, so we conserve a leading double slash if found. - func_normal_abspath_altnamespace=/ - ;; - /*) - # Absolute path, do nothing. - ;; - *) - # Relative path, prepend $cwd. - func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath - ;; - esac - - # Cancel out all the simple stuff to save iterations. We also want - # the path to end with a slash for ease of parsing, so make sure - # there is one (and only one) here. - func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"` - while :; do - # Processed it all yet? - if test / = "$func_normal_abspath_tpath"; then - # If we ascended to the root using ".." the result may be empty now. - if test -z "$func_normal_abspath_result"; then - func_normal_abspath_result=/ - fi - break - fi - func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$_G_pathcar"` - func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$_G_pathcdr"` - # Figure out what to do with it - case $func_normal_abspath_tcomponent in - "") - # Trailing empty path component, ignore it. - ;; - ..) - # Parent dir; strip last assembled component from result. - func_dirname "$func_normal_abspath_result" - func_normal_abspath_result=$func_dirname_result - ;; - *) - # Actual path component, append it. - func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent" - ;; - esac - done - # Restore leading double-slash if one was found on entry. - func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result -} - - -# func_notquiet ARG... -# -------------------- -# Echo program name prefixed message only when not in quiet mode. -func_notquiet () -{ - $debug_cmd - - $opt_quiet || func_echo ${1+"$@"} - - # A bug in bash halts the script if the last line of a function - # fails when set -e is in force, so we need another command to - # work around that: - : -} - - -# func_relative_path SRCDIR DSTDIR -# -------------------------------- -# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR. -func_relative_path () -{ - $debug_cmd - - func_relative_path_result= - func_normal_abspath "$1" - func_relative_path_tlibdir=$func_normal_abspath_result - func_normal_abspath "$2" - func_relative_path_tbindir=$func_normal_abspath_result - - # Ascend the tree starting from libdir - while :; do - # check if we have found a prefix of bindir - case $func_relative_path_tbindir in - $func_relative_path_tlibdir) - # found an exact match - func_relative_path_tcancelled= - break - ;; - $func_relative_path_tlibdir*) - # found a matching prefix - func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" - func_relative_path_tcancelled=$func_stripname_result - if test -z "$func_relative_path_result"; then - func_relative_path_result=. - fi - break - ;; - *) - func_dirname $func_relative_path_tlibdir - func_relative_path_tlibdir=$func_dirname_result - if test -z "$func_relative_path_tlibdir"; then - # Have to descend all the way to the root! - func_relative_path_result=../$func_relative_path_result - func_relative_path_tcancelled=$func_relative_path_tbindir - break - fi - func_relative_path_result=../$func_relative_path_result - ;; - esac - done - - # Now calculate path; take care to avoid doubling-up slashes. - func_stripname '' '/' "$func_relative_path_result" - func_relative_path_result=$func_stripname_result - func_stripname '/' '/' "$func_relative_path_tcancelled" - if test -n "$func_stripname_result"; then - func_append func_relative_path_result "/$func_stripname_result" - fi - - # Normalisation. If bindir is libdir, return '.' else relative path. - if test -n "$func_relative_path_result"; then - func_stripname './' '' "$func_relative_path_result" - func_relative_path_result=$func_stripname_result - fi - - test -n "$func_relative_path_result" || func_relative_path_result=. - - : -} - - -# func_quote_for_eval ARG... -# -------------------------- -# Aesthetically quote ARGs to be evaled later. -# This function returns two values: -# i) func_quote_for_eval_result -# double-quoted, suitable for a subsequent eval -# ii) func_quote_for_eval_unquoted_result -# has all characters that are still active within double -# quotes backslashified. -func_quote_for_eval () -{ - $debug_cmd - - func_quote_for_eval_unquoted_result= - func_quote_for_eval_result= - while test 0 -lt $#; do - case $1 in - *[\\\`\"\$]*) - _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;; - *) - _G_unquoted_arg=$1 ;; - esac - if test -n "$func_quote_for_eval_unquoted_result"; then - func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg" - else - func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg" - fi - - case $_G_unquoted_arg in - # Double-quote args containing shell metacharacters to delay - # word splitting, command substitution and variable expansion - # for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - _G_quoted_arg=\"$_G_unquoted_arg\" - ;; - *) - _G_quoted_arg=$_G_unquoted_arg - ;; - esac - - if test -n "$func_quote_for_eval_result"; then - func_append func_quote_for_eval_result " $_G_quoted_arg" - else - func_append func_quote_for_eval_result "$_G_quoted_arg" - fi - shift - done -} - - -# func_quote_for_expand ARG -# ------------------------- -# Aesthetically quote ARG to be evaled later; same as above, -# but do not quote variable references. -func_quote_for_expand () -{ - $debug_cmd - - case $1 in - *[\\\`\"]*) - _G_arg=`$ECHO "$1" | $SED \ - -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;; - *) - _G_arg=$1 ;; - esac - - case $_G_arg in - # Double-quote args containing shell metacharacters to delay - # word splitting and command substitution for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - _G_arg=\"$_G_arg\" - ;; - esac - - func_quote_for_expand_result=$_G_arg -} - - -# func_stripname PREFIX SUFFIX NAME -# --------------------------------- -# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -if test yes = "$_G_HAVE_XSI_OPS"; then - eval 'func_stripname () - { - $debug_cmd - - # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are - # positional parameters, so assign one to ordinary variable first. - func_stripname_result=$3 - func_stripname_result=${func_stripname_result#"$1"} - func_stripname_result=${func_stripname_result%"$2"} - }' -else - func_stripname () - { - $debug_cmd - - case $2 in - .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;; - *) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;; - esac - } -fi - - -# func_show_eval CMD [FAIL_EXP] -# ----------------------------- -# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is -# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -# is given, then evaluate it. -func_show_eval () -{ - $debug_cmd - - _G_cmd=$1 - _G_fail_exp=${2-':'} - - func_quote_for_expand "$_G_cmd" - eval "func_notquiet $func_quote_for_expand_result" - - $opt_dry_run || { - eval "$_G_cmd" - _G_status=$? - if test 0 -ne "$_G_status"; then - eval "(exit $_G_status); $_G_fail_exp" - fi - } -} - - -# func_show_eval_locale CMD [FAIL_EXP] -# ------------------------------------ -# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is -# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -# is given, then evaluate it. Use the saved locale for evaluation. -func_show_eval_locale () -{ - $debug_cmd - - _G_cmd=$1 - _G_fail_exp=${2-':'} - - $opt_quiet || { - func_quote_for_expand "$_G_cmd" - eval "func_echo $func_quote_for_expand_result" - } - - $opt_dry_run || { - eval "$_G_user_locale - $_G_cmd" - _G_status=$? - eval "$_G_safe_locale" - if test 0 -ne "$_G_status"; then - eval "(exit $_G_status); $_G_fail_exp" - fi - } -} - - -# func_tr_sh -# ---------- -# Turn $1 into a string suitable for a shell variable name. -# Result is stored in $func_tr_sh_result. All characters -# not in the set a-zA-Z0-9_ are replaced with '_'. Further, -# if $1 begins with a digit, a '_' is prepended as well. -func_tr_sh () -{ - $debug_cmd - - case $1 in - [0-9]* | *[!a-zA-Z0-9_]*) - func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'` - ;; - * ) - func_tr_sh_result=$1 - ;; - esac -} - - -# func_verbose ARG... -# ------------------- -# Echo program name prefixed message in verbose mode only. -func_verbose () -{ - $debug_cmd - - $opt_verbose && func_echo "$*" - - : -} - - -# func_warn_and_continue ARG... -# ----------------------------- -# Echo program name prefixed warning message to standard error. -func_warn_and_continue () -{ - $debug_cmd - - $require_term_colors - - func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2 -} - - -# func_warning CATEGORY ARG... -# ---------------------------- -# Echo program name prefixed warning message to standard error. Warning -# messages can be filtered according to CATEGORY, where this function -# elides messages where CATEGORY is not listed in the global variable -# 'opt_warning_types'. -func_warning () -{ - $debug_cmd - - # CATEGORY must be in the warning_categories list! - case " $warning_categories " in - *" $1 "*) ;; - *) func_internal_error "invalid warning category '$1'" ;; - esac - - _G_category=$1 - shift - - case " $opt_warning_types " in - *" $_G_category "*) $warning_func ${1+"$@"} ;; - esac -} - - -# func_sort_ver VER1 VER2 -# ----------------------- -# 'sort -V' is not generally available. -# Note this deviates from the version comparison in automake -# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a -# but this should suffice as we won't be specifying old -# version formats or redundant trailing .0 in bootstrap.conf. -# If we did want full compatibility then we should probably -# use m4_version_compare from autoconf. -func_sort_ver () -{ - $debug_cmd - - printf '%s\n%s\n' "$1" "$2" \ - | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n -} - -# func_lt_ver PREV CURR -# --------------------- -# Return true if PREV and CURR are in the correct order according to -# func_sort_ver, otherwise false. Use it like this: -# -# func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..." -func_lt_ver () -{ - $debug_cmd - - test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q` -} - - -# Local variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'before-save-hook 'time-stamp) -# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC" -# time-stamp-time-zone: "UTC" -# End: -#! /bin/sh - -# Set a version string for this script. -scriptversion=2014-01-07.03; # UTC - -# A portable, pluggable option parser for Bourne shell. -# Written by Gary V. Vaughan, 2010 - -# Copyright (C) 2010-2015 Free Software Foundation, Inc. -# This is free software; see the source for copying conditions. There is NO -# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# Please report bugs or propose patches to gary@gnu.org. - - -## ------ ## -## Usage. ## -## ------ ## - -# This file is a library for parsing options in your shell scripts along -# with assorted other useful supporting features that you can make use -# of too. -# -# For the simplest scripts you might need only: -# -# #!/bin/sh -# . relative/path/to/funclib.sh -# . relative/path/to/options-parser -# scriptversion=1.0 -# func_options ${1+"$@"} -# eval set dummy "$func_options_result"; shift -# ...rest of your script... -# -# In order for the '--version' option to work, you will need to have a -# suitably formatted comment like the one at the top of this file -# starting with '# Written by ' and ending with '# warranty; '. -# -# For '-h' and '--help' to work, you will also need a one line -# description of your script's purpose in a comment directly above the -# '# Written by ' line, like the one at the top of this file. -# -# The default options also support '--debug', which will turn on shell -# execution tracing (see the comment above debug_cmd below for another -# use), and '--verbose' and the func_verbose function to allow your script -# to display verbose messages only when your user has specified -# '--verbose'. -# -# After sourcing this file, you can plug processing for additional -# options by amending the variables from the 'Configuration' section -# below, and following the instructions in the 'Option parsing' -# section further down. - -## -------------- ## -## Configuration. ## -## -------------- ## - -# You should override these variables in your script after sourcing this -# file so that they reflect the customisations you have added to the -# option parser. - -# The usage line for option parsing errors and the start of '-h' and -# '--help' output messages. You can embed shell variables for delayed -# expansion at the time the message is displayed, but you will need to -# quote other shell meta-characters carefully to prevent them being -# expanded when the contents are evaled. -usage='$progpath [OPTION]...' - -# Short help message in response to '-h' and '--help'. Add to this or -# override it after sourcing this library to reflect the full set of -# options your script accepts. -usage_message="\ - --debug enable verbose shell tracing - -W, --warnings=CATEGORY - report the warnings falling in CATEGORY [all] - -v, --verbose verbosely report processing - --version print version information and exit - -h, --help print short or long help message and exit -" - -# Additional text appended to 'usage_message' in response to '--help'. -long_help_message=" -Warning categories include: - 'all' show all warnings - 'none' turn off all the warnings - 'error' warnings are treated as fatal errors" - -# Help message printed before fatal option parsing errors. -fatal_help="Try '\$progname --help' for more information." - - - -## ------------------------- ## -## Hook function management. ## -## ------------------------- ## - -# This section contains functions for adding, removing, and running hooks -# to the main code. A hook is just a named list of of function, that can -# be run in order later on. - -# func_hookable FUNC_NAME -# ----------------------- -# Declare that FUNC_NAME will run hooks added with -# 'func_add_hook FUNC_NAME ...'. -func_hookable () -{ - $debug_cmd - - func_append hookable_fns " $1" -} - - -# func_add_hook FUNC_NAME HOOK_FUNC -# --------------------------------- -# Request that FUNC_NAME call HOOK_FUNC before it returns. FUNC_NAME must -# first have been declared "hookable" by a call to 'func_hookable'. -func_add_hook () -{ - $debug_cmd - - case " $hookable_fns " in - *" $1 "*) ;; - *) func_fatal_error "'$1' does not accept hook functions." ;; - esac - - eval func_append ${1}_hooks '" $2"' -} - - -# func_remove_hook FUNC_NAME HOOK_FUNC -# ------------------------------------ -# Remove HOOK_FUNC from the list of functions called by FUNC_NAME. -func_remove_hook () -{ - $debug_cmd - - eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`' -} - - -# func_run_hooks FUNC_NAME [ARG]... -# --------------------------------- -# Run all hook functions registered to FUNC_NAME. -# It is assumed that the list of hook functions contains nothing more -# than a whitespace-delimited list of legal shell function names, and -# no effort is wasted trying to catch shell meta-characters or preserve -# whitespace. -func_run_hooks () -{ - $debug_cmd - - case " $hookable_fns " in - *" $1 "*) ;; - *) func_fatal_error "'$1' does not support hook funcions.n" ;; - esac - - eval _G_hook_fns=\$$1_hooks; shift - - for _G_hook in $_G_hook_fns; do - eval $_G_hook '"$@"' - - # store returned options list back into positional - # parameters for next 'cmd' execution. - eval _G_hook_result=\$${_G_hook}_result - eval set dummy "$_G_hook_result"; shift - done - - func_quote_for_eval ${1+"$@"} - func_run_hooks_result=$func_quote_for_eval_result -} - - - -## --------------- ## -## Option parsing. ## -## --------------- ## - -# In order to add your own option parsing hooks, you must accept the -# full positional parameter list in your hook function, remove any -# options that you action, and then pass back the remaining unprocessed -# options in '_result', escaped suitably for -# 'eval'. Like this: -# -# my_options_prep () -# { -# $debug_cmd -# -# # Extend the existing usage message. -# usage_message=$usage_message' -# -s, --silent don'\''t print informational messages -# ' -# -# func_quote_for_eval ${1+"$@"} -# my_options_prep_result=$func_quote_for_eval_result -# } -# func_add_hook func_options_prep my_options_prep -# -# -# my_silent_option () -# { -# $debug_cmd -# -# # Note that for efficiency, we parse as many options as we can -# # recognise in a loop before passing the remainder back to the -# # caller on the first unrecognised argument we encounter. -# while test $# -gt 0; do -# opt=$1; shift -# case $opt in -# --silent|-s) opt_silent=: ;; -# # Separate non-argument short options: -# -s*) func_split_short_opt "$_G_opt" -# set dummy "$func_split_short_opt_name" \ -# "-$func_split_short_opt_arg" ${1+"$@"} -# shift -# ;; -# *) set dummy "$_G_opt" "$*"; shift; break ;; -# esac -# done -# -# func_quote_for_eval ${1+"$@"} -# my_silent_option_result=$func_quote_for_eval_result -# } -# func_add_hook func_parse_options my_silent_option -# -# -# my_option_validation () -# { -# $debug_cmd -# -# $opt_silent && $opt_verbose && func_fatal_help "\ -# '--silent' and '--verbose' options are mutually exclusive." -# -# func_quote_for_eval ${1+"$@"} -# my_option_validation_result=$func_quote_for_eval_result -# } -# func_add_hook func_validate_options my_option_validation -# -# You'll alse need to manually amend $usage_message to reflect the extra -# options you parse. It's preferable to append if you can, so that -# multiple option parsing hooks can be added safely. - - -# func_options [ARG]... -# --------------------- -# All the functions called inside func_options are hookable. See the -# individual implementations for details. -func_hookable func_options -func_options () -{ - $debug_cmd - - func_options_prep ${1+"$@"} - eval func_parse_options \ - ${func_options_prep_result+"$func_options_prep_result"} - eval func_validate_options \ - ${func_parse_options_result+"$func_parse_options_result"} - - eval func_run_hooks func_options \ - ${func_validate_options_result+"$func_validate_options_result"} - - # save modified positional parameters for caller - func_options_result=$func_run_hooks_result -} - - -# func_options_prep [ARG]... -# -------------------------- -# All initialisations required before starting the option parse loop. -# Note that when calling hook functions, we pass through the list of -# positional parameters. If a hook function modifies that list, and -# needs to propogate that back to rest of this script, then the complete -# modified list must be put in 'func_run_hooks_result' before -# returning. -func_hookable func_options_prep -func_options_prep () -{ - $debug_cmd - - # Option defaults: - opt_verbose=false - opt_warning_types= - - func_run_hooks func_options_prep ${1+"$@"} - - # save modified positional parameters for caller - func_options_prep_result=$func_run_hooks_result -} - - -# func_parse_options [ARG]... -# --------------------------- -# The main option parsing loop. -func_hookable func_parse_options -func_parse_options () -{ - $debug_cmd - - func_parse_options_result= - - # this just eases exit handling - while test $# -gt 0; do - # Defer to hook functions for initial option parsing, so they - # get priority in the event of reusing an option name. - func_run_hooks func_parse_options ${1+"$@"} - - # Adjust func_parse_options positional parameters to match - eval set dummy "$func_run_hooks_result"; shift - - # Break out of the loop if we already parsed every option. - test $# -gt 0 || break - - _G_opt=$1 - shift - case $_G_opt in - --debug|-x) debug_cmd='set -x' - func_echo "enabling shell trace mode" - $debug_cmd - ;; - - --no-warnings|--no-warning|--no-warn) - set dummy --warnings none ${1+"$@"} - shift - ;; - - --warnings|--warning|-W) - test $# = 0 && func_missing_arg $_G_opt && break - case " $warning_categories $1" in - *" $1 "*) - # trailing space prevents matching last $1 above - func_append_uniq opt_warning_types " $1" - ;; - *all) - opt_warning_types=$warning_categories - ;; - *none) - opt_warning_types=none - warning_func=: - ;; - *error) - opt_warning_types=$warning_categories - warning_func=func_fatal_error - ;; - *) - func_fatal_error \ - "unsupported warning category: '$1'" - ;; - esac - shift - ;; - - --verbose|-v) opt_verbose=: ;; - --version) func_version ;; - -\?|-h) func_usage ;; - --help) func_help ;; - - # Separate optargs to long options (plugins may need this): - --*=*) func_split_equals "$_G_opt" - set dummy "$func_split_equals_lhs" \ - "$func_split_equals_rhs" ${1+"$@"} - shift - ;; - - # Separate optargs to short options: - -W*) - func_split_short_opt "$_G_opt" - set dummy "$func_split_short_opt_name" \ - "$func_split_short_opt_arg" ${1+"$@"} - shift - ;; - - # Separate non-argument short options: - -\?*|-h*|-v*|-x*) - func_split_short_opt "$_G_opt" - set dummy "$func_split_short_opt_name" \ - "-$func_split_short_opt_arg" ${1+"$@"} - shift - ;; - - --) break ;; - -*) func_fatal_help "unrecognised option: '$_G_opt'" ;; - *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;; - esac - done - - # save modified positional parameters for caller - func_quote_for_eval ${1+"$@"} - func_parse_options_result=$func_quote_for_eval_result -} - - -# func_validate_options [ARG]... -# ------------------------------ -# Perform any sanity checks on option settings and/or unconsumed -# arguments. -func_hookable func_validate_options -func_validate_options () -{ - $debug_cmd - - # Display all warnings if -W was not given. - test -n "$opt_warning_types" || opt_warning_types=" $warning_categories" - - func_run_hooks func_validate_options ${1+"$@"} - - # Bail if the options were screwed! - $exit_cmd $EXIT_FAILURE - - # save modified positional parameters for caller - func_validate_options_result=$func_run_hooks_result -} - - - -## ----------------- ## -## Helper functions. ## -## ----------------- ## - -# This section contains the helper functions used by the rest of the -# hookable option parser framework in ascii-betical order. - - -# func_fatal_help ARG... -# ---------------------- -# Echo program name prefixed message to standard error, followed by -# a help hint, and exit. -func_fatal_help () -{ - $debug_cmd - - eval \$ECHO \""Usage: $usage"\" - eval \$ECHO \""$fatal_help"\" - func_error ${1+"$@"} - exit $EXIT_FAILURE -} - - -# func_help -# --------- -# Echo long help message to standard output and exit. -func_help () -{ - $debug_cmd - - func_usage_message - $ECHO "$long_help_message" - exit 0 -} - - -# func_missing_arg ARGNAME -# ------------------------ -# Echo program name prefixed message to standard error and set global -# exit_cmd. -func_missing_arg () -{ - $debug_cmd - - func_error "Missing argument for '$1'." - exit_cmd=exit -} - - -# func_split_equals STRING -# ------------------------ -# Set func_split_equals_lhs and func_split_equals_rhs shell variables after -# splitting STRING at the '=' sign. -test -z "$_G_HAVE_XSI_OPS" \ - && (eval 'x=a/b/c; - test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \ - && _G_HAVE_XSI_OPS=yes - -if test yes = "$_G_HAVE_XSI_OPS" -then - # This is an XSI compatible shell, allowing a faster implementation... - eval 'func_split_equals () - { - $debug_cmd - - func_split_equals_lhs=${1%%=*} - func_split_equals_rhs=${1#*=} - test "x$func_split_equals_lhs" = "x$1" \ - && func_split_equals_rhs= - }' -else - # ...otherwise fall back to using expr, which is often a shell builtin. - func_split_equals () - { - $debug_cmd - - func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'` - func_split_equals_rhs= - test "x$func_split_equals_lhs" = "x$1" \ - || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'` - } -fi #func_split_equals - - -# func_split_short_opt SHORTOPT -# ----------------------------- -# Set func_split_short_opt_name and func_split_short_opt_arg shell -# variables after splitting SHORTOPT after the 2nd character. -if test yes = "$_G_HAVE_XSI_OPS" -then - # This is an XSI compatible shell, allowing a faster implementation... - eval 'func_split_short_opt () - { - $debug_cmd - - func_split_short_opt_arg=${1#??} - func_split_short_opt_name=${1%"$func_split_short_opt_arg"} - }' -else - # ...otherwise fall back to using expr, which is often a shell builtin. - func_split_short_opt () - { - $debug_cmd - - func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'` - func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'` - } -fi #func_split_short_opt - - -# func_usage -# ---------- -# Echo short help message to standard output and exit. -func_usage () -{ - $debug_cmd - - func_usage_message - $ECHO "Run '$progname --help |${PAGER-more}' for full usage" - exit 0 -} - - -# func_usage_message -# ------------------ -# Echo short help message to standard output. -func_usage_message () -{ - $debug_cmd - - eval \$ECHO \""Usage: $usage"\" - echo - $SED -n 's|^# || - /^Written by/{ - x;p;x - } - h - /^Written by/q' < "$progpath" - echo - eval \$ECHO \""$usage_message"\" -} - - -# func_version -# ------------ -# Echo version message to standard output and exit. -func_version () -{ - $debug_cmd - - printf '%s\n' "$progname $scriptversion" - $SED -n ' - /(C)/!b go - :more - /\./!{ - N - s|\n# | | - b more - } - :go - /^# Written by /,/# warranty; / { - s|^# || - s|^# *$|| - s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2| - p - } - /^# Written by / { - s|^# || - p - } - /^warranty; /q' < "$progpath" - - exit $? -} - - -# Local variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'before-save-hook 'time-stamp) -# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC" -# time-stamp-time-zone: "UTC" -# End: - -# Set a version string. -scriptversion='(GNU libtool) 2.4.6' - - -# func_echo ARG... -# ---------------- -# Libtool also displays the current mode in messages, so override -# funclib.sh func_echo with this custom definition. -func_echo () -{ - $debug_cmd - - _G_message=$* - - func_echo_IFS=$IFS - IFS=$nl - for _G_line in $_G_message; do - IFS=$func_echo_IFS - $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line" - done - IFS=$func_echo_IFS -} - - -# func_warning ARG... -# ------------------- -# Libtool warnings are not categorized, so override funclib.sh -# func_warning with this simpler definition. -func_warning () -{ - $debug_cmd - - $warning_func ${1+"$@"} -} - - -## ---------------- ## -## Options parsing. ## -## ---------------- ## - -# Hook in the functions to make sure our own options are parsed during -# the option parsing loop. - -usage='$progpath [OPTION]... [MODE-ARG]...' - -# Short help message in response to '-h'. -usage_message="Options: - --config show all configuration variables - --debug enable verbose shell tracing - -n, --dry-run display commands without modifying any files - --features display basic configuration information and exit - --mode=MODE use operation mode MODE - --no-warnings equivalent to '-Wnone' - --preserve-dup-deps don't remove duplicate dependency libraries - --quiet, --silent don't print informational messages - --tag=TAG use configuration variables from tag TAG - -v, --verbose print more informational messages than default - --version print version information - -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all] - -h, --help, --help-all print short, long, or detailed help message -" - -# Additional text appended to 'usage_message' in response to '--help'. -func_help () -{ - $debug_cmd - - func_usage_message - $ECHO "$long_help_message - -MODE must be one of the following: - - clean remove files from the build directory - compile compile a source file into a libtool object - execute automatically set library path, then run a program - finish complete the installation of libtool libraries - install install libraries or executables - link create a library or an executable - uninstall remove libraries from an installed directory - -MODE-ARGS vary depending on the MODE. When passed as first option, -'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that. -Try '$progname --help --mode=MODE' for a more detailed description of MODE. - -When reporting a bug, please describe a test case to reproduce it and -include the following information: - - host-triplet: $host - shell: $SHELL - compiler: $LTCC - compiler flags: $LTCFLAGS - linker: $LD (gnu? $with_gnu_ld) - version: $progname (GNU libtool) 2.4.6 - automake: `($AUTOMAKE --version) 2>/dev/null |$SED 1q` - autoconf: `($AUTOCONF --version) 2>/dev/null |$SED 1q` - -Report bugs to . -GNU libtool home page: . -General help using GNU software: ." - exit 0 -} - - -# func_lo2o OBJECT-NAME -# --------------------- -# Transform OBJECT-NAME from a '.lo' suffix to the platform specific -# object suffix. - -lo2o=s/\\.lo\$/.$objext/ -o2lo=s/\\.$objext\$/.lo/ - -if test yes = "$_G_HAVE_XSI_OPS"; then - eval 'func_lo2o () - { - case $1 in - *.lo) func_lo2o_result=${1%.lo}.$objext ;; - * ) func_lo2o_result=$1 ;; - esac - }' - - # func_xform LIBOBJ-OR-SOURCE - # --------------------------- - # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise) - # suffix to a '.lo' libtool-object suffix. - eval 'func_xform () - { - func_xform_result=${1%.*}.lo - }' -else - # ...otherwise fall back to using sed. - func_lo2o () - { - func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"` - } - - func_xform () - { - func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'` - } -fi - - -# func_fatal_configuration ARG... -# ------------------------------- -# Echo program name prefixed message to standard error, followed by -# a configuration failure hint, and exit. -func_fatal_configuration () -{ - func__fatal_error ${1+"$@"} \ - "See the $PACKAGE documentation for more information." \ - "Fatal configuration error." -} - - -# func_config -# ----------- -# Display the configuration for all the tags in this script. -func_config () -{ - re_begincf='^# ### BEGIN LIBTOOL' - re_endcf='^# ### END LIBTOOL' - - # Default configuration. - $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" - - # Now print the configurations for the tags. - for tagname in $taglist; do - $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" - done - - exit $? -} - - -# func_features -# ------------- -# Display the features supported by this script. -func_features () -{ - echo "host: $host" - if test yes = "$build_libtool_libs"; then - echo "enable shared libraries" - else - echo "disable shared libraries" - fi - if test yes = "$build_old_libs"; then - echo "enable static libraries" - else - echo "disable static libraries" - fi - - exit $? -} - - -# func_enable_tag TAGNAME -# ----------------------- -# Verify that TAGNAME is valid, and either flag an error and exit, or -# enable the TAGNAME tag. We also add TAGNAME to the global $taglist -# variable here. -func_enable_tag () -{ - # Global variable: - tagname=$1 - - re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" - re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" - sed_extractcf=/$re_begincf/,/$re_endcf/p - - # Validate tagname. - case $tagname in - *[!-_A-Za-z0-9,/]*) - func_fatal_error "invalid tag name: $tagname" - ;; - esac - - # Don't test for the "default" C tag, as we know it's - # there but not specially marked. - case $tagname in - CC) ;; - *) - if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then - taglist="$taglist $tagname" - - # Evaluate the configuration. Be careful to quote the path - # and the sed script, to avoid splitting on whitespace, but - # also don't use non-portable quotes within backquotes within - # quotes we have to do it in 2 steps: - extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` - eval "$extractedcf" - else - func_error "ignoring unknown tag $tagname" - fi - ;; - esac -} - - -# func_check_version_match -# ------------------------ -# Ensure that we are using m4 macros, and libtool script from the same -# release of libtool. -func_check_version_match () -{ - if test "$package_revision" != "$macro_revision"; then - if test "$VERSION" != "$macro_version"; then - if test -z "$macro_version"; then - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from an older release. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF - fi - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, -$progname: but the definition of this LT_INIT comes from revision $macro_revision. -$progname: You should recreate aclocal.m4 with macros from revision $package_revision -$progname: of $PACKAGE $VERSION and run autoconf again. -_LT_EOF - fi - - exit $EXIT_MISMATCH - fi -} - - -# libtool_options_prep [ARG]... -# ----------------------------- -# Preparation for options parsed by libtool. -libtool_options_prep () -{ - $debug_mode - - # Option defaults: - opt_config=false - opt_dlopen= - opt_dry_run=false - opt_help=false - opt_mode= - opt_preserve_dup_deps=false - opt_quiet=false - - nonopt= - preserve_args= - - # Shorthand for --mode=foo, only valid as the first argument - case $1 in - clean|clea|cle|cl) - shift; set dummy --mode clean ${1+"$@"}; shift - ;; - compile|compil|compi|comp|com|co|c) - shift; set dummy --mode compile ${1+"$@"}; shift - ;; - execute|execut|execu|exec|exe|ex|e) - shift; set dummy --mode execute ${1+"$@"}; shift - ;; - finish|finis|fini|fin|fi|f) - shift; set dummy --mode finish ${1+"$@"}; shift - ;; - install|instal|insta|inst|ins|in|i) - shift; set dummy --mode install ${1+"$@"}; shift - ;; - link|lin|li|l) - shift; set dummy --mode link ${1+"$@"}; shift - ;; - uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) - shift; set dummy --mode uninstall ${1+"$@"}; shift - ;; - esac - - # Pass back the list of options. - func_quote_for_eval ${1+"$@"} - libtool_options_prep_result=$func_quote_for_eval_result -} -func_add_hook func_options_prep libtool_options_prep - - -# libtool_parse_options [ARG]... -# --------------------------------- -# Provide handling for libtool specific options. -libtool_parse_options () -{ - $debug_cmd - - # Perform our own loop to consume as many options as possible in - # each iteration. - while test $# -gt 0; do - _G_opt=$1 - shift - case $_G_opt in - --dry-run|--dryrun|-n) - opt_dry_run=: - ;; - - --config) func_config ;; - - --dlopen|-dlopen) - opt_dlopen="${opt_dlopen+$opt_dlopen -}$1" - shift - ;; - - --preserve-dup-deps) - opt_preserve_dup_deps=: ;; - - --features) func_features ;; - - --finish) set dummy --mode finish ${1+"$@"}; shift ;; - - --help) opt_help=: ;; - - --help-all) opt_help=': help-all' ;; - - --mode) test $# = 0 && func_missing_arg $_G_opt && break - opt_mode=$1 - case $1 in - # Valid mode arguments: - clean|compile|execute|finish|install|link|relink|uninstall) ;; - - # Catch anything else as an error - *) func_error "invalid argument for $_G_opt" - exit_cmd=exit - break - ;; - esac - shift - ;; - - --no-silent|--no-quiet) - opt_quiet=false - func_append preserve_args " $_G_opt" - ;; - - --no-warnings|--no-warning|--no-warn) - opt_warning=false - func_append preserve_args " $_G_opt" - ;; - - --no-verbose) - opt_verbose=false - func_append preserve_args " $_G_opt" - ;; - - --silent|--quiet) - opt_quiet=: - opt_verbose=false - func_append preserve_args " $_G_opt" - ;; - - --tag) test $# = 0 && func_missing_arg $_G_opt && break - opt_tag=$1 - func_append preserve_args " $_G_opt $1" - func_enable_tag "$1" - shift - ;; - - --verbose|-v) opt_quiet=false - opt_verbose=: - func_append preserve_args " $_G_opt" - ;; - - # An option not handled by this hook function: - *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;; - esac - done - - - # save modified positional parameters for caller - func_quote_for_eval ${1+"$@"} - libtool_parse_options_result=$func_quote_for_eval_result -} -func_add_hook func_parse_options libtool_parse_options - - - -# libtool_validate_options [ARG]... -# --------------------------------- -# Perform any sanity checks on option settings and/or unconsumed -# arguments. -libtool_validate_options () -{ - # save first non-option argument - if test 0 -lt $#; then - nonopt=$1 - shift - fi - - # preserve --debug - test : = "$debug_cmd" || func_append preserve_args " --debug" - - case $host in - # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452 - # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788 - *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*) - # don't eliminate duplications in $postdeps and $predeps - opt_duplicate_compiler_generated_deps=: - ;; - *) - opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps - ;; - esac - - $opt_help || { - # Sanity checks first: - func_check_version_match - - test yes != "$build_libtool_libs" \ - && test yes != "$build_old_libs" \ - && func_fatal_configuration "not configured to build any kind of library" - - # Darwin sucks - eval std_shrext=\"$shrext_cmds\" - - # Only execute mode is allowed to have -dlopen flags. - if test -n "$opt_dlopen" && test execute != "$opt_mode"; then - func_error "unrecognized option '-dlopen'" - $ECHO "$help" 1>&2 - exit $EXIT_FAILURE - fi - - # Change the help message to a mode-specific one. - generic_help=$help - help="Try '$progname --help --mode=$opt_mode' for more information." - } - - # Pass back the unparsed argument list - func_quote_for_eval ${1+"$@"} - libtool_validate_options_result=$func_quote_for_eval_result -} -func_add_hook func_validate_options libtool_validate_options - - -# Process options as early as possible so that --help and --version -# can return quickly. -func_options ${1+"$@"} -eval set dummy "$func_options_result"; shift - - - -## ----------- ## -## Main. ## -## ----------- ## - -magic='%%%MAGIC variable%%%' -magic_exe='%%%MAGIC EXE variable%%%' - -# Global variables. -extracted_archives= -extracted_serial=0 - -# If this variable is set in any of the actions, the command in it -# will be execed at the end. This prevents here-documents from being -# left over by shells. -exec_cmd= - - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -$1 -_LTECHO_EOF' -} - -# func_generated_by_libtool -# True iff stdin has been generated by Libtool. This function is only -# a basic sanity check; it will hardly flush out determined imposters. -func_generated_by_libtool_p () -{ - $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 -} - -# func_lalib_p file -# True iff FILE is a libtool '.la' library or '.lo' object file. -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_lalib_p () -{ - test -f "$1" && - $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p -} - -# func_lalib_unsafe_p file -# True iff FILE is a libtool '.la' library or '.lo' object file. -# This function implements the same check as func_lalib_p without -# resorting to external programs. To this end, it redirects stdin and -# closes it afterwards, without saving the original file descriptor. -# As a safety measure, use it only where a negative result would be -# fatal anyway. Works if 'file' does not exist. -func_lalib_unsafe_p () -{ - lalib_p=no - if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then - for lalib_p_l in 1 2 3 4 - do - read lalib_p_line - case $lalib_p_line in - \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; - esac - done - exec 0<&5 5<&- - fi - test yes = "$lalib_p" -} - -# func_ltwrapper_script_p file -# True iff FILE is a libtool wrapper script -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_ltwrapper_script_p () -{ - test -f "$1" && - $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p -} - -# func_ltwrapper_executable_p file -# True iff FILE is a libtool wrapper executable -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_ltwrapper_executable_p () -{ - func_ltwrapper_exec_suffix= - case $1 in - *.exe) ;; - *) func_ltwrapper_exec_suffix=.exe ;; - esac - $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 -} - -# func_ltwrapper_scriptname file -# Assumes file is an ltwrapper_executable -# uses $file to determine the appropriate filename for a -# temporary ltwrapper_script. -func_ltwrapper_scriptname () -{ - func_dirname_and_basename "$1" "" "." - func_stripname '' '.exe' "$func_basename_result" - func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper -} - -# func_ltwrapper_p file -# True iff FILE is a libtool wrapper script or wrapper executable -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_ltwrapper_p () -{ - func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" -} - - -# func_execute_cmds commands fail_cmd -# Execute tilde-delimited COMMANDS. -# If FAIL_CMD is given, eval that upon failure. -# FAIL_CMD may read-access the current command in variable CMD! -func_execute_cmds () -{ - $debug_cmd - - save_ifs=$IFS; IFS='~' - for cmd in $1; do - IFS=$sp$nl - eval cmd=\"$cmd\" - IFS=$save_ifs - func_show_eval "$cmd" "${2-:}" - done - IFS=$save_ifs -} - - -# func_source file -# Source FILE, adding directory component if necessary. -# Note that it is not necessary on cygwin/mingw to append a dot to -# FILE even if both FILE and FILE.exe exist: automatic-append-.exe -# behavior happens only for exec(3), not for open(2)! Also, sourcing -# 'FILE.' does not work on cygwin managed mounts. -func_source () -{ - $debug_cmd - - case $1 in - */* | *\\*) . "$1" ;; - *) . "./$1" ;; - esac -} - - -# func_resolve_sysroot PATH -# Replace a leading = in PATH with a sysroot. Store the result into -# func_resolve_sysroot_result -func_resolve_sysroot () -{ - func_resolve_sysroot_result=$1 - case $func_resolve_sysroot_result in - =*) - func_stripname '=' '' "$func_resolve_sysroot_result" - func_resolve_sysroot_result=$lt_sysroot$func_stripname_result - ;; - esac -} - -# func_replace_sysroot PATH -# If PATH begins with the sysroot, replace it with = and -# store the result into func_replace_sysroot_result. -func_replace_sysroot () -{ - case $lt_sysroot:$1 in - ?*:"$lt_sysroot"*) - func_stripname "$lt_sysroot" '' "$1" - func_replace_sysroot_result='='$func_stripname_result - ;; - *) - # Including no sysroot. - func_replace_sysroot_result=$1 - ;; - esac -} - -# func_infer_tag arg -# Infer tagged configuration to use if any are available and -# if one wasn't chosen via the "--tag" command line option. -# Only attempt this if the compiler in the base compile -# command doesn't match the default compiler. -# arg is usually of the form 'gcc ...' -func_infer_tag () -{ - $debug_cmd - - if test -n "$available_tags" && test -z "$tagname"; then - CC_quoted= - for arg in $CC; do - func_append_quoted CC_quoted "$arg" - done - CC_expanded=`func_echo_all $CC` - CC_quoted_expanded=`func_echo_all $CC_quoted` - case $@ in - # Blanks in the command may have been stripped by the calling shell, - # but not from the CC environment variable when configure was run. - " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ - " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; - # Blanks at the start of $base_compile will cause this to fail - # if we don't check for them as well. - *) - for z in $available_tags; do - if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then - # Evaluate the configuration. - eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" - CC_quoted= - for arg in $CC; do - # Double-quote args containing other shell metacharacters. - func_append_quoted CC_quoted "$arg" - done - CC_expanded=`func_echo_all $CC` - CC_quoted_expanded=`func_echo_all $CC_quoted` - case "$@ " in - " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ - " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) - # The compiler in the base compile command matches - # the one in the tagged configuration. - # Assume this is the tagged configuration we want. - tagname=$z - break - ;; - esac - fi - done - # If $tagname still isn't set, then no tagged configuration - # was found and let the user know that the "--tag" command - # line option must be used. - if test -z "$tagname"; then - func_echo "unable to infer tagged configuration" - func_fatal_error "specify a tag with '--tag'" -# else -# func_verbose "using $tagname tagged configuration" - fi - ;; - esac - fi -} - - - -# func_write_libtool_object output_name pic_name nonpic_name -# Create a libtool object file (analogous to a ".la" file), -# but don't create it if we're doing a dry run. -func_write_libtool_object () -{ - write_libobj=$1 - if test yes = "$build_libtool_libs"; then - write_lobj=\'$2\' - else - write_lobj=none - fi - - if test yes = "$build_old_libs"; then - write_oldobj=\'$3\' - else - write_oldobj=none - fi - - $opt_dry_run || { - cat >${write_libobj}T </dev/null` - if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then - func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | - $SED -e "$sed_naive_backslashify"` - else - func_convert_core_file_wine_to_w32_result= - fi - fi -} -# end: func_convert_core_file_wine_to_w32 - - -# func_convert_core_path_wine_to_w32 ARG -# Helper function used by path conversion functions when $build is *nix, and -# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly -# configured wine environment available, with the winepath program in $build's -# $PATH. Assumes ARG has no leading or trailing path separator characters. -# -# ARG is path to be converted from $build format to win32. -# Result is available in $func_convert_core_path_wine_to_w32_result. -# Unconvertible file (directory) names in ARG are skipped; if no directory names -# are convertible, then the result may be empty. -func_convert_core_path_wine_to_w32 () -{ - $debug_cmd - - # unfortunately, winepath doesn't convert paths, only file names - func_convert_core_path_wine_to_w32_result= - if test -n "$1"; then - oldIFS=$IFS - IFS=: - for func_convert_core_path_wine_to_w32_f in $1; do - IFS=$oldIFS - func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" - if test -n "$func_convert_core_file_wine_to_w32_result"; then - if test -z "$func_convert_core_path_wine_to_w32_result"; then - func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result - else - func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" - fi - fi - done - IFS=$oldIFS - fi -} -# end: func_convert_core_path_wine_to_w32 - - -# func_cygpath ARGS... -# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when -# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) -# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or -# (2), returns the Cygwin file name or path in func_cygpath_result (input -# file name or path is assumed to be in w32 format, as previously converted -# from $build's *nix or MSYS format). In case (3), returns the w32 file name -# or path in func_cygpath_result (input file name or path is assumed to be in -# Cygwin format). Returns an empty string on error. -# -# ARGS are passed to cygpath, with the last one being the file name or path to -# be converted. -# -# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH -# environment variable; do not put it in $PATH. -func_cygpath () -{ - $debug_cmd - - if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then - func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` - if test "$?" -ne 0; then - # on failure, ensure result is empty - func_cygpath_result= - fi - else - func_cygpath_result= - func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'" - fi -} -#end: func_cygpath - - -# func_convert_core_msys_to_w32 ARG -# Convert file name or path ARG from MSYS format to w32 format. Return -# result in func_convert_core_msys_to_w32_result. -func_convert_core_msys_to_w32 () -{ - $debug_cmd - - # awkward: cmd appends spaces to result - func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | - $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"` -} -#end: func_convert_core_msys_to_w32 - - -# func_convert_file_check ARG1 ARG2 -# Verify that ARG1 (a file name in $build format) was converted to $host -# format in ARG2. Otherwise, emit an error message, but continue (resetting -# func_to_host_file_result to ARG1). -func_convert_file_check () -{ - $debug_cmd - - if test -z "$2" && test -n "$1"; then - func_error "Could not determine host file name corresponding to" - func_error " '$1'" - func_error "Continuing, but uninstalled executables may not work." - # Fallback: - func_to_host_file_result=$1 - fi -} -# end func_convert_file_check - - -# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH -# Verify that FROM_PATH (a path in $build format) was converted to $host -# format in TO_PATH. Otherwise, emit an error message, but continue, resetting -# func_to_host_file_result to a simplistic fallback value (see below). -func_convert_path_check () -{ - $debug_cmd - - if test -z "$4" && test -n "$3"; then - func_error "Could not determine the host path corresponding to" - func_error " '$3'" - func_error "Continuing, but uninstalled executables may not work." - # Fallback. This is a deliberately simplistic "conversion" and - # should not be "improved". See libtool.info. - if test "x$1" != "x$2"; then - lt_replace_pathsep_chars="s|$1|$2|g" - func_to_host_path_result=`echo "$3" | - $SED -e "$lt_replace_pathsep_chars"` - else - func_to_host_path_result=$3 - fi - fi -} -# end func_convert_path_check - - -# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG -# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT -# and appending REPL if ORIG matches BACKPAT. -func_convert_path_front_back_pathsep () -{ - $debug_cmd - - case $4 in - $1 ) func_to_host_path_result=$3$func_to_host_path_result - ;; - esac - case $4 in - $2 ) func_append func_to_host_path_result "$3" - ;; - esac -} -# end func_convert_path_front_back_pathsep - - -################################################## -# $build to $host FILE NAME CONVERSION FUNCTIONS # -################################################## -# invoked via '$to_host_file_cmd ARG' -# -# In each case, ARG is the path to be converted from $build to $host format. -# Result will be available in $func_to_host_file_result. - - -# func_to_host_file ARG -# Converts the file name ARG from $build format to $host format. Return result -# in func_to_host_file_result. -func_to_host_file () -{ - $debug_cmd - - $to_host_file_cmd "$1" -} -# end func_to_host_file - - -# func_to_tool_file ARG LAZY -# converts the file name ARG from $build format to toolchain format. Return -# result in func_to_tool_file_result. If the conversion in use is listed -# in (the comma separated) LAZY, no conversion takes place. -func_to_tool_file () -{ - $debug_cmd - - case ,$2, in - *,"$to_tool_file_cmd",*) - func_to_tool_file_result=$1 - ;; - *) - $to_tool_file_cmd "$1" - func_to_tool_file_result=$func_to_host_file_result - ;; - esac -} -# end func_to_tool_file - - -# func_convert_file_noop ARG -# Copy ARG to func_to_host_file_result. -func_convert_file_noop () -{ - func_to_host_file_result=$1 -} -# end func_convert_file_noop - - -# func_convert_file_msys_to_w32 ARG -# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic -# conversion to w32 is not available inside the cwrapper. Returns result in -# func_to_host_file_result. -func_convert_file_msys_to_w32 () -{ - $debug_cmd - - func_to_host_file_result=$1 - if test -n "$1"; then - func_convert_core_msys_to_w32 "$1" - func_to_host_file_result=$func_convert_core_msys_to_w32_result - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_msys_to_w32 - - -# func_convert_file_cygwin_to_w32 ARG -# Convert file name ARG from Cygwin to w32 format. Returns result in -# func_to_host_file_result. -func_convert_file_cygwin_to_w32 () -{ - $debug_cmd - - func_to_host_file_result=$1 - if test -n "$1"; then - # because $build is cygwin, we call "the" cygpath in $PATH; no need to use - # LT_CYGPATH in this case. - func_to_host_file_result=`cygpath -m "$1"` - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_cygwin_to_w32 - - -# func_convert_file_nix_to_w32 ARG -# Convert file name ARG from *nix to w32 format. Requires a wine environment -# and a working winepath. Returns result in func_to_host_file_result. -func_convert_file_nix_to_w32 () -{ - $debug_cmd - - func_to_host_file_result=$1 - if test -n "$1"; then - func_convert_core_file_wine_to_w32 "$1" - func_to_host_file_result=$func_convert_core_file_wine_to_w32_result - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_nix_to_w32 - - -# func_convert_file_msys_to_cygwin ARG -# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. -# Returns result in func_to_host_file_result. -func_convert_file_msys_to_cygwin () -{ - $debug_cmd - - func_to_host_file_result=$1 - if test -n "$1"; then - func_convert_core_msys_to_w32 "$1" - func_cygpath -u "$func_convert_core_msys_to_w32_result" - func_to_host_file_result=$func_cygpath_result - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_msys_to_cygwin - - -# func_convert_file_nix_to_cygwin ARG -# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed -# in a wine environment, working winepath, and LT_CYGPATH set. Returns result -# in func_to_host_file_result. -func_convert_file_nix_to_cygwin () -{ - $debug_cmd - - func_to_host_file_result=$1 - if test -n "$1"; then - # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. - func_convert_core_file_wine_to_w32 "$1" - func_cygpath -u "$func_convert_core_file_wine_to_w32_result" - func_to_host_file_result=$func_cygpath_result - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_nix_to_cygwin - - -############################################# -# $build to $host PATH CONVERSION FUNCTIONS # -############################################# -# invoked via '$to_host_path_cmd ARG' -# -# In each case, ARG is the path to be converted from $build to $host format. -# The result will be available in $func_to_host_path_result. -# -# Path separators are also converted from $build format to $host format. If -# ARG begins or ends with a path separator character, it is preserved (but -# converted to $host format) on output. -# -# All path conversion functions are named using the following convention: -# file name conversion function : func_convert_file_X_to_Y () -# path conversion function : func_convert_path_X_to_Y () -# where, for any given $build/$host combination the 'X_to_Y' value is the -# same. If conversion functions are added for new $build/$host combinations, -# the two new functions must follow this pattern, or func_init_to_host_path_cmd -# will break. - - -# func_init_to_host_path_cmd -# Ensures that function "pointer" variable $to_host_path_cmd is set to the -# appropriate value, based on the value of $to_host_file_cmd. -to_host_path_cmd= -func_init_to_host_path_cmd () -{ - $debug_cmd - - if test -z "$to_host_path_cmd"; then - func_stripname 'func_convert_file_' '' "$to_host_file_cmd" - to_host_path_cmd=func_convert_path_$func_stripname_result - fi -} - - -# func_to_host_path ARG -# Converts the path ARG from $build format to $host format. Return result -# in func_to_host_path_result. -func_to_host_path () -{ - $debug_cmd - - func_init_to_host_path_cmd - $to_host_path_cmd "$1" -} -# end func_to_host_path - - -# func_convert_path_noop ARG -# Copy ARG to func_to_host_path_result. -func_convert_path_noop () -{ - func_to_host_path_result=$1 -} -# end func_convert_path_noop - - -# func_convert_path_msys_to_w32 ARG -# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic -# conversion to w32 is not available inside the cwrapper. Returns result in -# func_to_host_path_result. -func_convert_path_msys_to_w32 () -{ - $debug_cmd - - func_to_host_path_result=$1 - if test -n "$1"; then - # Remove leading and trailing path separator characters from ARG. MSYS - # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; - # and winepath ignores them completely. - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" - func_to_host_path_result=$func_convert_core_msys_to_w32_result - func_convert_path_check : ";" \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" - fi -} -# end func_convert_path_msys_to_w32 - - -# func_convert_path_cygwin_to_w32 ARG -# Convert path ARG from Cygwin to w32 format. Returns result in -# func_to_host_file_result. -func_convert_path_cygwin_to_w32 () -{ - $debug_cmd - - func_to_host_path_result=$1 - if test -n "$1"; then - # See func_convert_path_msys_to_w32: - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` - func_convert_path_check : ";" \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" - fi -} -# end func_convert_path_cygwin_to_w32 - - -# func_convert_path_nix_to_w32 ARG -# Convert path ARG from *nix to w32 format. Requires a wine environment and -# a working winepath. Returns result in func_to_host_file_result. -func_convert_path_nix_to_w32 () -{ - $debug_cmd - - func_to_host_path_result=$1 - if test -n "$1"; then - # See func_convert_path_msys_to_w32: - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" - func_to_host_path_result=$func_convert_core_path_wine_to_w32_result - func_convert_path_check : ";" \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" - fi -} -# end func_convert_path_nix_to_w32 - - -# func_convert_path_msys_to_cygwin ARG -# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. -# Returns result in func_to_host_file_result. -func_convert_path_msys_to_cygwin () -{ - $debug_cmd - - func_to_host_path_result=$1 - if test -n "$1"; then - # See func_convert_path_msys_to_w32: - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" - func_cygpath -u -p "$func_convert_core_msys_to_w32_result" - func_to_host_path_result=$func_cygpath_result - func_convert_path_check : : \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" : "$1" - fi -} -# end func_convert_path_msys_to_cygwin - - -# func_convert_path_nix_to_cygwin ARG -# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a -# a wine environment, working winepath, and LT_CYGPATH set. Returns result in -# func_to_host_file_result. -func_convert_path_nix_to_cygwin () -{ - $debug_cmd - - func_to_host_path_result=$1 - if test -n "$1"; then - # Remove leading and trailing path separator characters from - # ARG. msys behavior is inconsistent here, cygpath turns them - # into '.;' and ';.', and winepath ignores them completely. - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" - func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" - func_to_host_path_result=$func_cygpath_result - func_convert_path_check : : \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" : "$1" - fi -} -# end func_convert_path_nix_to_cygwin - - -# func_dll_def_p FILE -# True iff FILE is a Windows DLL '.def' file. -# Keep in sync with _LT_DLL_DEF_P in libtool.m4 -func_dll_def_p () -{ - $debug_cmd - - func_dll_def_p_tmp=`$SED -n \ - -e 's/^[ ]*//' \ - -e '/^\(;.*\)*$/d' \ - -e 's/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p' \ - -e q \ - "$1"` - test DEF = "$func_dll_def_p_tmp" -} - - -# func_mode_compile arg... -func_mode_compile () -{ - $debug_cmd - - # Get the compilation command and the source file. - base_compile= - srcfile=$nonopt # always keep a non-empty value in "srcfile" - suppress_opt=yes - suppress_output= - arg_mode=normal - libobj= - later= - pie_flag= - - for arg - do - case $arg_mode in - arg ) - # do not "continue". Instead, add this to base_compile - lastarg=$arg - arg_mode=normal - ;; - - target ) - libobj=$arg - arg_mode=normal - continue - ;; - - normal ) - # Accept any command-line options. - case $arg in - -o) - test -n "$libobj" && \ - func_fatal_error "you cannot specify '-o' more than once" - arg_mode=target - continue - ;; - - -pie | -fpie | -fPIE) - func_append pie_flag " $arg" - continue - ;; - - -shared | -static | -prefer-pic | -prefer-non-pic) - func_append later " $arg" - continue - ;; - - -no-suppress) - suppress_opt=no - continue - ;; - - -Xcompiler) - arg_mode=arg # the next one goes into the "base_compile" arg list - continue # The current "srcfile" will either be retained or - ;; # replaced later. I would guess that would be a bug. - - -Wc,*) - func_stripname '-Wc,' '' "$arg" - args=$func_stripname_result - lastarg= - save_ifs=$IFS; IFS=, - for arg in $args; do - IFS=$save_ifs - func_append_quoted lastarg "$arg" - done - IFS=$save_ifs - func_stripname ' ' '' "$lastarg" - lastarg=$func_stripname_result - - # Add the arguments to base_compile. - func_append base_compile " $lastarg" - continue - ;; - - *) - # Accept the current argument as the source file. - # The previous "srcfile" becomes the current argument. - # - lastarg=$srcfile - srcfile=$arg - ;; - esac # case $arg - ;; - esac # case $arg_mode - - # Aesthetically quote the previous argument. - func_append_quoted base_compile "$lastarg" - done # for arg - - case $arg_mode in - arg) - func_fatal_error "you must specify an argument for -Xcompile" - ;; - target) - func_fatal_error "you must specify a target with '-o'" - ;; - *) - # Get the name of the library object. - test -z "$libobj" && { - func_basename "$srcfile" - libobj=$func_basename_result - } - ;; - esac - - # Recognize several different file suffixes. - # If the user specifies -o file.o, it is replaced with file.lo - case $libobj in - *.[cCFSifmso] | \ - *.ada | *.adb | *.ads | *.asm | \ - *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ - *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup) - func_xform "$libobj" - libobj=$func_xform_result - ;; - esac - - case $libobj in - *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; - *) - func_fatal_error "cannot determine name of library object from '$libobj'" - ;; - esac - - func_infer_tag $base_compile - - for arg in $later; do - case $arg in - -shared) - test yes = "$build_libtool_libs" \ - || func_fatal_configuration "cannot build a shared library" - build_old_libs=no - continue - ;; - - -static) - build_libtool_libs=no - build_old_libs=yes - continue - ;; - - -prefer-pic) - pic_mode=yes - continue - ;; - - -prefer-non-pic) - pic_mode=no - continue - ;; - esac - done - - func_quote_for_eval "$libobj" - test "X$libobj" != "X$func_quote_for_eval_result" \ - && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ - && func_warning "libobj name '$libobj' may not contain shell special characters." - func_dirname_and_basename "$obj" "/" "" - objname=$func_basename_result - xdir=$func_dirname_result - lobj=$xdir$objdir/$objname - - test -z "$base_compile" && \ - func_fatal_help "you must specify a compilation command" - - # Delete any leftover library objects. - if test yes = "$build_old_libs"; then - removelist="$obj $lobj $libobj ${libobj}T" - else - removelist="$lobj $libobj ${libobj}T" - fi - - # On Cygwin there's no "real" PIC flag so we must build both object types - case $host_os in - cygwin* | mingw* | pw32* | os2* | cegcc*) - pic_mode=default - ;; - esac - if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then - # non-PIC code in shared libraries is not supported - pic_mode=default - fi - - # Calculate the filename of the output object if compiler does - # not support -o with -c - if test no = "$compiler_c_o"; then - output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext - lockfile=$output_obj.lock - else - output_obj= - need_locks=no - lockfile= - fi - - # Lock this critical section if it is needed - # We use this script file to make the link, it avoids creating a new file - if test yes = "$need_locks"; then - until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do - func_echo "Waiting for $lockfile to be removed" - sleep 2 - done - elif test warn = "$need_locks"; then - if test -f "$lockfile"; then - $ECHO "\ -*** ERROR, $lockfile exists and contains: -`cat $lockfile 2>/dev/null` - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support '-c' and '-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $opt_dry_run || $RM $removelist - exit $EXIT_FAILURE - fi - func_append removelist " $output_obj" - $ECHO "$srcfile" > "$lockfile" - fi - - $opt_dry_run || $RM $removelist - func_append removelist " $lockfile" - trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 - - func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 - srcfile=$func_to_tool_file_result - func_quote_for_eval "$srcfile" - qsrcfile=$func_quote_for_eval_result - - # Only build a PIC object if we are building libtool libraries. - if test yes = "$build_libtool_libs"; then - # Without this assignment, base_compile gets emptied. - fbsd_hideous_sh_bug=$base_compile - - if test no != "$pic_mode"; then - command="$base_compile $qsrcfile $pic_flag" - else - # Don't build PIC code - command="$base_compile $qsrcfile" - fi - - func_mkdir_p "$xdir$objdir" - - if test -z "$output_obj"; then - # Place PIC objects in $objdir - func_append command " -o $lobj" - fi - - func_show_eval_locale "$command" \ - 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' - - if test warn = "$need_locks" && - test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then - $ECHO "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support '-c' and '-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $opt_dry_run || $RM $removelist - exit $EXIT_FAILURE - fi - - # Just move the object if needed, then go on to compile the next one - if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then - func_show_eval '$MV "$output_obj" "$lobj"' \ - 'error=$?; $opt_dry_run || $RM $removelist; exit $error' - fi - - # Allow error messages only from the first compilation. - if test yes = "$suppress_opt"; then - suppress_output=' >/dev/null 2>&1' - fi - fi - - # Only build a position-dependent object if we build old libraries. - if test yes = "$build_old_libs"; then - if test yes != "$pic_mode"; then - # Don't build PIC code - command="$base_compile $qsrcfile$pie_flag" - else - command="$base_compile $qsrcfile $pic_flag" - fi - if test yes = "$compiler_c_o"; then - func_append command " -o $obj" - fi - - # Suppress compiler output if we already did a PIC compilation. - func_append command "$suppress_output" - func_show_eval_locale "$command" \ - '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' - - if test warn = "$need_locks" && - test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then - $ECHO "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support '-c' and '-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $opt_dry_run || $RM $removelist - exit $EXIT_FAILURE - fi - - # Just move the object if needed - if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then - func_show_eval '$MV "$output_obj" "$obj"' \ - 'error=$?; $opt_dry_run || $RM $removelist; exit $error' - fi - fi - - $opt_dry_run || { - func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" - - # Unlock the critical section if it was locked - if test no != "$need_locks"; then - removelist=$lockfile - $RM "$lockfile" - fi - } - - exit $EXIT_SUCCESS -} - -$opt_help || { - test compile = "$opt_mode" && func_mode_compile ${1+"$@"} -} - -func_mode_help () -{ - # We need to display help for each of the modes. - case $opt_mode in - "") - # Generic help is extracted from the usage comments - # at the start of this file. - func_help - ;; - - clean) - $ECHO \ -"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... - -Remove files from the build directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed -to RM. - -If FILE is a libtool library, object or program, all the files associated -with it are deleted. Otherwise, only FILE itself is deleted using RM." - ;; - - compile) - $ECHO \ -"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE - -Compile a source file into a libtool library object. - -This mode accepts the following additional options: - - -o OUTPUT-FILE set the output file name to OUTPUT-FILE - -no-suppress do not suppress compiler output for multiple passes - -prefer-pic try to build PIC objects only - -prefer-non-pic try to build non-PIC objects only - -shared do not build a '.o' file suitable for static linking - -static only build a '.o' file suitable for static linking - -Wc,FLAG pass FLAG directly to the compiler - -COMPILE-COMMAND is a command to be used in creating a 'standard' object file -from the given SOURCEFILE. - -The output file name is determined by removing the directory component from -SOURCEFILE, then substituting the C source code suffix '.c' with the -library object suffix, '.lo'." - ;; - - execute) - $ECHO \ -"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... - -Automatically set library path, then run a program. - -This mode accepts the following additional options: - - -dlopen FILE add the directory containing FILE to the library path - -This mode sets the library path environment variable according to '-dlopen' -flags. - -If any of the ARGS are libtool executable wrappers, then they are translated -into their corresponding uninstalled binary, and any of their required library -directories are added to the library path. - -Then, COMMAND is executed, with ARGS as arguments." - ;; - - finish) - $ECHO \ -"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... - -Complete the installation of libtool libraries. - -Each LIBDIR is a directory that contains libtool libraries. - -The commands that this mode executes may require superuser privileges. Use -the '--dry-run' option if you just want to see what would be executed." - ;; - - install) - $ECHO \ -"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... - -Install executables or libraries. - -INSTALL-COMMAND is the installation command. The first component should be -either the 'install' or 'cp' program. - -The following components of INSTALL-COMMAND are treated specially: - - -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation - -The rest of the components are interpreted as arguments to that command (only -BSD-compatible install options are recognized)." - ;; - - link) - $ECHO \ -"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... - -Link object files or libraries together to form another library, or to -create an executable program. - -LINK-COMMAND is a command using the C compiler that you would use to create -a program from several object files. - -The following components of LINK-COMMAND are treated specially: - - -all-static do not do any dynamic linking at all - -avoid-version do not add a version suffix if possible - -bindir BINDIR specify path to binaries directory (for systems where - libraries must be found in the PATH setting at runtime) - -dlopen FILE '-dlpreopen' FILE if it cannot be dlopened at runtime - -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols - -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) - -export-symbols SYMFILE - try to export only the symbols listed in SYMFILE - -export-symbols-regex REGEX - try to export only the symbols matching REGEX - -LLIBDIR search LIBDIR for required installed libraries - -lNAME OUTPUT-FILE requires the installed library libNAME - -module build a library that can dlopened - -no-fast-install disable the fast-install mode - -no-install link a not-installable executable - -no-undefined declare that a library does not refer to external symbols - -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -objectlist FILE use a list of object files found in FILE to specify objects - -os2dllname NAME force a short DLL name on OS/2 (no effect on other OSes) - -precious-files-regex REGEX - don't remove output files matching REGEX - -release RELEASE specify package release information - -rpath LIBDIR the created library will eventually be installed in LIBDIR - -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries - -shared only do dynamic linking of libtool libraries - -shrext SUFFIX override the standard shared library file extension - -static do not do any dynamic linking of uninstalled libtool libraries - -static-libtool-libs - do not do any dynamic linking of libtool libraries - -version-info CURRENT[:REVISION[:AGE]] - specify library version info [each variable defaults to 0] - -weak LIBNAME declare that the target provides the LIBNAME interface - -Wc,FLAG - -Xcompiler FLAG pass linker-specific FLAG directly to the compiler - -Wl,FLAG - -Xlinker FLAG pass linker-specific FLAG directly to the linker - -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) - -All other options (arguments beginning with '-') are ignored. - -Every other argument is treated as a filename. Files ending in '.la' are -treated as uninstalled libtool libraries, other files are standard or library -object files. - -If the OUTPUT-FILE ends in '.la', then a libtool library is created, -only library objects ('.lo' files) may be specified, and '-rpath' is -required, except when creating a convenience library. - -If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created -using 'ar' and 'ranlib', or on Windows using 'lib'. - -If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file -is created, otherwise an executable program is created." - ;; - - uninstall) - $ECHO \ -"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... - -Remove libraries from an installation directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed -to RM. - -If FILE is a libtool library, all the files associated with it are deleted. -Otherwise, only FILE itself is deleted using RM." - ;; - - *) - func_fatal_help "invalid operation mode '$opt_mode'" - ;; - esac - - echo - $ECHO "Try '$progname --help' for more information about other modes." -} - -# Now that we've collected a possible --mode arg, show help if necessary -if $opt_help; then - if test : = "$opt_help"; then - func_mode_help - else - { - func_help noexit - for opt_mode in compile link execute install finish uninstall clean; do - func_mode_help - done - } | $SED -n '1p; 2,$s/^Usage:/ or: /p' - { - func_help noexit - for opt_mode in compile link execute install finish uninstall clean; do - echo - func_mode_help - done - } | - $SED '1d - /^When reporting/,/^Report/{ - H - d - } - $x - /information about other modes/d - /more detailed .*MODE/d - s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' - fi - exit $? -fi - - -# func_mode_execute arg... -func_mode_execute () -{ - $debug_cmd - - # The first argument is the command name. - cmd=$nonopt - test -z "$cmd" && \ - func_fatal_help "you must specify a COMMAND" - - # Handle -dlopen flags immediately. - for file in $opt_dlopen; do - test -f "$file" \ - || func_fatal_help "'$file' is not a file" - - dir= - case $file in - *.la) - func_resolve_sysroot "$file" - file=$func_resolve_sysroot_result - - # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$file" \ - || func_fatal_help "'$lib' is not a valid libtool archive" - - # Read the libtool library. - dlname= - library_names= - func_source "$file" - - # Skip this library if it cannot be dlopened. - if test -z "$dlname"; then - # Warn if it was a shared library. - test -n "$library_names" && \ - func_warning "'$file' was not linked with '-export-dynamic'" - continue - fi - - func_dirname "$file" "" "." - dir=$func_dirname_result - - if test -f "$dir/$objdir/$dlname"; then - func_append dir "/$objdir" - else - if test ! -f "$dir/$dlname"; then - func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'" - fi - fi - ;; - - *.lo) - # Just add the directory containing the .lo file. - func_dirname "$file" "" "." - dir=$func_dirname_result - ;; - - *) - func_warning "'-dlopen' is ignored for non-libtool libraries and objects" - continue - ;; - esac - - # Get the absolute pathname. - absdir=`cd "$dir" && pwd` - test -n "$absdir" && dir=$absdir - - # Now add the directory to shlibpath_var. - if eval "test -z \"\$$shlibpath_var\""; then - eval "$shlibpath_var=\"\$dir\"" - else - eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" - fi - done - - # This variable tells wrapper scripts just to set shlibpath_var - # rather than running their programs. - libtool_execute_magic=$magic - - # Check if any of the arguments is a wrapper script. - args= - for file - do - case $file in - -* | *.la | *.lo ) ;; - *) - # Do a test to see if this is really a libtool program. - if func_ltwrapper_script_p "$file"; then - func_source "$file" - # Transform arg to wrapped name. - file=$progdir/$program - elif func_ltwrapper_executable_p "$file"; then - func_ltwrapper_scriptname "$file" - func_source "$func_ltwrapper_scriptname_result" - # Transform arg to wrapped name. - file=$progdir/$program - fi - ;; - esac - # Quote arguments (to preserve shell metacharacters). - func_append_quoted args "$file" - done - - if $opt_dry_run; then - # Display what would be done. - if test -n "$shlibpath_var"; then - eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" - echo "export $shlibpath_var" - fi - $ECHO "$cmd$args" - exit $EXIT_SUCCESS - else - if test -n "$shlibpath_var"; then - # Export the shlibpath_var. - eval "export $shlibpath_var" - fi - - # Restore saved environment variables - for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES - do - eval "if test \"\${save_$lt_var+set}\" = set; then - $lt_var=\$save_$lt_var; export $lt_var - else - $lt_unset $lt_var - fi" - done - - # Now prepare to actually exec the command. - exec_cmd=\$cmd$args - fi -} - -test execute = "$opt_mode" && func_mode_execute ${1+"$@"} - - -# func_mode_finish arg... -func_mode_finish () -{ - $debug_cmd - - libs= - libdirs= - admincmds= - - for opt in "$nonopt" ${1+"$@"} - do - if test -d "$opt"; then - func_append libdirs " $opt" - - elif test -f "$opt"; then - if func_lalib_unsafe_p "$opt"; then - func_append libs " $opt" - else - func_warning "'$opt' is not a valid libtool archive" - fi - - else - func_fatal_error "invalid argument '$opt'" - fi - done - - if test -n "$libs"; then - if test -n "$lt_sysroot"; then - sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` - sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" - else - sysroot_cmd= - fi - - # Remove sysroot references - if $opt_dry_run; then - for lib in $libs; do - echo "removing references to $lt_sysroot and '=' prefixes from $lib" - done - else - tmpdir=`func_mktempdir` - for lib in $libs; do - $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ - > $tmpdir/tmp-la - mv -f $tmpdir/tmp-la $lib - done - ${RM}r "$tmpdir" - fi - fi - - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - for libdir in $libdirs; do - if test -n "$finish_cmds"; then - # Do each command in the finish commands. - func_execute_cmds "$finish_cmds" 'admincmds="$admincmds -'"$cmd"'"' - fi - if test -n "$finish_eval"; then - # Do the single finish_eval. - eval cmds=\"$finish_eval\" - $opt_dry_run || eval "$cmds" || func_append admincmds " - $cmds" - fi - done - fi - - # Exit here if they wanted silent mode. - $opt_quiet && exit $EXIT_SUCCESS - - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - echo "----------------------------------------------------------------------" - echo "Libraries have been installed in:" - for libdir in $libdirs; do - $ECHO " $libdir" - done - echo - echo "If you ever happen to want to link against installed libraries" - echo "in a given directory, LIBDIR, you must either use libtool, and" - echo "specify the full pathname of the library, or use the '-LLIBDIR'" - echo "flag during linking and do at least one of the following:" - if test -n "$shlibpath_var"; then - echo " - add LIBDIR to the '$shlibpath_var' environment variable" - echo " during execution" - fi - if test -n "$runpath_var"; then - echo " - add LIBDIR to the '$runpath_var' environment variable" - echo " during linking" - fi - if test -n "$hardcode_libdir_flag_spec"; then - libdir=LIBDIR - eval flag=\"$hardcode_libdir_flag_spec\" - - $ECHO " - use the '$flag' linker flag" - fi - if test -n "$admincmds"; then - $ECHO " - have your system administrator run these commands:$admincmds" - fi - if test -f /etc/ld.so.conf; then - echo " - have your system administrator add LIBDIR to '/etc/ld.so.conf'" - fi - echo - - echo "See any operating system documentation about shared libraries for" - case $host in - solaris2.[6789]|solaris2.1[0-9]) - echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" - echo "pages." - ;; - *) - echo "more information, such as the ld(1) and ld.so(8) manual pages." - ;; - esac - echo "----------------------------------------------------------------------" - fi - exit $EXIT_SUCCESS -} - -test finish = "$opt_mode" && func_mode_finish ${1+"$@"} - - -# func_mode_install arg... -func_mode_install () -{ - $debug_cmd - - # There may be an optional sh(1) argument at the beginning of - # install_prog (especially on Windows NT). - if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" || - # Allow the use of GNU shtool's install command. - case $nonopt in *shtool*) :;; *) false;; esac - then - # Aesthetically quote it. - func_quote_for_eval "$nonopt" - install_prog="$func_quote_for_eval_result " - arg=$1 - shift - else - install_prog= - arg=$nonopt - fi - - # The real first argument should be the name of the installation program. - # Aesthetically quote it. - func_quote_for_eval "$arg" - func_append install_prog "$func_quote_for_eval_result" - install_shared_prog=$install_prog - case " $install_prog " in - *[\\\ /]cp\ *) install_cp=: ;; - *) install_cp=false ;; - esac - - # We need to accept at least all the BSD install flags. - dest= - files= - opts= - prev= - install_type= - isdir=false - stripme= - no_mode=: - for arg - do - arg2= - if test -n "$dest"; then - func_append files " $dest" - dest=$arg - continue - fi - - case $arg in - -d) isdir=: ;; - -f) - if $install_cp; then :; else - prev=$arg - fi - ;; - -g | -m | -o) - prev=$arg - ;; - -s) - stripme=" -s" - continue - ;; - -*) - ;; - *) - # If the previous option needed an argument, then skip it. - if test -n "$prev"; then - if test X-m = "X$prev" && test -n "$install_override_mode"; then - arg2=$install_override_mode - no_mode=false - fi - prev= - else - dest=$arg - continue - fi - ;; - esac - - # Aesthetically quote the argument. - func_quote_for_eval "$arg" - func_append install_prog " $func_quote_for_eval_result" - if test -n "$arg2"; then - func_quote_for_eval "$arg2" - fi - func_append install_shared_prog " $func_quote_for_eval_result" - done - - test -z "$install_prog" && \ - func_fatal_help "you must specify an install program" - - test -n "$prev" && \ - func_fatal_help "the '$prev' option requires an argument" - - if test -n "$install_override_mode" && $no_mode; then - if $install_cp; then :; else - func_quote_for_eval "$install_override_mode" - func_append install_shared_prog " -m $func_quote_for_eval_result" - fi - fi - - if test -z "$files"; then - if test -z "$dest"; then - func_fatal_help "no file or destination specified" - else - func_fatal_help "you must specify a destination" - fi - fi - - # Strip any trailing slash from the destination. - func_stripname '' '/' "$dest" - dest=$func_stripname_result - - # Check to see that the destination is a directory. - test -d "$dest" && isdir=: - if $isdir; then - destdir=$dest - destname= - else - func_dirname_and_basename "$dest" "" "." - destdir=$func_dirname_result - destname=$func_basename_result - - # Not a directory, so check to see that there is only one file specified. - set dummy $files; shift - test "$#" -gt 1 && \ - func_fatal_help "'$dest' is not a directory" - fi - case $destdir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - for file in $files; do - case $file in - *.lo) ;; - *) - func_fatal_help "'$destdir' must be an absolute directory name" - ;; - esac - done - ;; - esac - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic=$magic - - staticlibs= - future_libdirs= - current_libdirs= - for file in $files; do - - # Do each installation. - case $file in - *.$libext) - # Do the static libraries later. - func_append staticlibs " $file" - ;; - - *.la) - func_resolve_sysroot "$file" - file=$func_resolve_sysroot_result - - # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$file" \ - || func_fatal_help "'$file' is not a valid libtool archive" - - library_names= - old_library= - relink_command= - func_source "$file" - - # Add the libdir to current_libdirs if it is the destination. - if test "X$destdir" = "X$libdir"; then - case "$current_libdirs " in - *" $libdir "*) ;; - *) func_append current_libdirs " $libdir" ;; - esac - else - # Note the libdir as a future libdir. - case "$future_libdirs " in - *" $libdir "*) ;; - *) func_append future_libdirs " $libdir" ;; - esac - fi - - func_dirname "$file" "/" "" - dir=$func_dirname_result - func_append dir "$objdir" - - if test -n "$relink_command"; then - # Determine the prefix the user has applied to our future dir. - inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` - - # Don't allow the user to place us outside of our expected - # location b/c this prevents finding dependent libraries that - # are installed to the same prefix. - # At present, this check doesn't affect windows .dll's that - # are installed into $libdir/../bin (currently, that works fine) - # but it's something to keep an eye on. - test "$inst_prefix_dir" = "$destdir" && \ - func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir" - - if test -n "$inst_prefix_dir"; then - # Stick the inst_prefix_dir data into the link command. - relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` - else - relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` - fi - - func_warning "relinking '$file'" - func_show_eval "$relink_command" \ - 'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"' - fi - - # See the names of the shared library. - set dummy $library_names; shift - if test -n "$1"; then - realname=$1 - shift - - srcname=$realname - test -n "$relink_command" && srcname=${realname}T - - # Install the shared library and build the symlinks. - func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ - 'exit $?' - tstripme=$stripme - case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - case $realname in - *.dll.a) - tstripme= - ;; - esac - ;; - os2*) - case $realname in - *_dll.a) - tstripme= - ;; - esac - ;; - esac - if test -n "$tstripme" && test -n "$striplib"; then - func_show_eval "$striplib $destdir/$realname" 'exit $?' - fi - - if test "$#" -gt 0; then - # Delete the old symlinks, and create new ones. - # Try 'ln -sf' first, because the 'ln' binary might depend on - # the symlink we replace! Solaris /bin/ln does not understand -f, - # so we also need to try rm && ln -s. - for linkname - do - test "$linkname" != "$realname" \ - && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" - done - fi - - # Do each command in the postinstall commands. - lib=$destdir/$realname - func_execute_cmds "$postinstall_cmds" 'exit $?' - fi - - # Install the pseudo-library for information purposes. - func_basename "$file" - name=$func_basename_result - instname=$dir/${name}i - func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' - - # Maybe install the static library, too. - test -n "$old_library" && func_append staticlibs " $dir/$old_library" - ;; - - *.lo) - # Install (i.e. copy) a libtool object. - - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile=$destdir/$destname - else - func_basename "$file" - destfile=$func_basename_result - destfile=$destdir/$destfile - fi - - # Deduce the name of the destination old-style object file. - case $destfile in - *.lo) - func_lo2o "$destfile" - staticdest=$func_lo2o_result - ;; - *.$objext) - staticdest=$destfile - destfile= - ;; - *) - func_fatal_help "cannot copy a libtool object to '$destfile'" - ;; - esac - - # Install the libtool object if requested. - test -n "$destfile" && \ - func_show_eval "$install_prog $file $destfile" 'exit $?' - - # Install the old object if enabled. - if test yes = "$build_old_libs"; then - # Deduce the name of the old-style object file. - func_lo2o "$file" - staticobj=$func_lo2o_result - func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' - fi - exit $EXIT_SUCCESS - ;; - - *) - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile=$destdir/$destname - else - func_basename "$file" - destfile=$func_basename_result - destfile=$destdir/$destfile - fi - - # If the file is missing, and there is a .exe on the end, strip it - # because it is most likely a libtool script we actually want to - # install - stripped_ext= - case $file in - *.exe) - if test ! -f "$file"; then - func_stripname '' '.exe' "$file" - file=$func_stripname_result - stripped_ext=.exe - fi - ;; - esac - - # Do a test to see if this is really a libtool program. - case $host in - *cygwin* | *mingw*) - if func_ltwrapper_executable_p "$file"; then - func_ltwrapper_scriptname "$file" - wrapper=$func_ltwrapper_scriptname_result - else - func_stripname '' '.exe' "$file" - wrapper=$func_stripname_result - fi - ;; - *) - wrapper=$file - ;; - esac - if func_ltwrapper_script_p "$wrapper"; then - notinst_deplibs= - relink_command= - - func_source "$wrapper" - - # Check the variables that should have been set. - test -z "$generated_by_libtool_version" && \ - func_fatal_error "invalid libtool wrapper script '$wrapper'" - - finalize=: - for lib in $notinst_deplibs; do - # Check to see that each library is installed. - libdir= - if test -f "$lib"; then - func_source "$lib" - fi - libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'` - if test -n "$libdir" && test ! -f "$libfile"; then - func_warning "'$lib' has not been installed in '$libdir'" - finalize=false - fi - done - - relink_command= - func_source "$wrapper" - - outputname= - if test no = "$fast_install" && test -n "$relink_command"; then - $opt_dry_run || { - if $finalize; then - tmpdir=`func_mktempdir` - func_basename "$file$stripped_ext" - file=$func_basename_result - outputname=$tmpdir/$file - # Replace the output file specification. - relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` - - $opt_quiet || { - func_quote_for_expand "$relink_command" - eval "func_echo $func_quote_for_expand_result" - } - if eval "$relink_command"; then : - else - func_error "error: relink '$file' with the above command before installing it" - $opt_dry_run || ${RM}r "$tmpdir" - continue - fi - file=$outputname - else - func_warning "cannot relink '$file'" - fi - } - else - # Install the binary that we compiled earlier. - file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` - fi - fi - - # remove .exe since cygwin /usr/bin/install will append another - # one anyway - case $install_prog,$host in - */usr/bin/install*,*cygwin*) - case $file:$destfile in - *.exe:*.exe) - # this is ok - ;; - *.exe:*) - destfile=$destfile.exe - ;; - *:*.exe) - func_stripname '' '.exe' "$destfile" - destfile=$func_stripname_result - ;; - esac - ;; - esac - func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' - $opt_dry_run || if test -n "$outputname"; then - ${RM}r "$tmpdir" - fi - ;; - esac - done - - for file in $staticlibs; do - func_basename "$file" - name=$func_basename_result - - # Set up the ranlib parameters. - oldlib=$destdir/$name - func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 - tool_oldlib=$func_to_tool_file_result - - func_show_eval "$install_prog \$file \$oldlib" 'exit $?' - - if test -n "$stripme" && test -n "$old_striplib"; then - func_show_eval "$old_striplib $tool_oldlib" 'exit $?' - fi - - # Do each command in the postinstall commands. - func_execute_cmds "$old_postinstall_cmds" 'exit $?' - done - - test -n "$future_libdirs" && \ - func_warning "remember to run '$progname --finish$future_libdirs'" - - if test -n "$current_libdirs"; then - # Maybe just do a dry run. - $opt_dry_run && current_libdirs=" -n$current_libdirs" - exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs' - else - exit $EXIT_SUCCESS - fi -} - -test install = "$opt_mode" && func_mode_install ${1+"$@"} - - -# func_generate_dlsyms outputname originator pic_p -# Extract symbols from dlprefiles and create ${outputname}S.o with -# a dlpreopen symbol table. -func_generate_dlsyms () -{ - $debug_cmd - - my_outputname=$1 - my_originator=$2 - my_pic_p=${3-false} - my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'` - my_dlsyms= - - if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then - if test -n "$NM" && test -n "$global_symbol_pipe"; then - my_dlsyms=${my_outputname}S.c - else - func_error "not configured to extract global symbols from dlpreopened files" - fi - fi - - if test -n "$my_dlsyms"; then - case $my_dlsyms in - "") ;; - *.c) - # Discover the nlist of each of the dlfiles. - nlist=$output_objdir/$my_outputname.nm - - func_show_eval "$RM $nlist ${nlist}S ${nlist}T" - - # Parse the name list into a source file. - func_verbose "creating $output_objdir/$my_dlsyms" - - $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ -/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */ -/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */ - -#ifdef __cplusplus -extern \"C\" { -#endif - -#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) -#pragma GCC diagnostic ignored \"-Wstrict-prototypes\" -#endif - -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE -/* DATA imports from DLLs on WIN32 can't be const, because runtime - relocations are performed -- see ld's documentation on pseudo-relocs. */ -# define LT_DLSYM_CONST -#elif defined __osf__ -/* This system does not cope well with relocations in const data. */ -# define LT_DLSYM_CONST -#else -# define LT_DLSYM_CONST const -#endif - -#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0) - -/* External symbol declarations for the compiler. */\ -" - - if test yes = "$dlself"; then - func_verbose "generating symbol list for '$output'" - - $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" - - # Add our own program objects to the symbol list. - progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` - for progfile in $progfiles; do - func_to_tool_file "$progfile" func_convert_file_msys_to_w32 - func_verbose "extracting global C symbols from '$func_to_tool_file_result'" - $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" - done - - if test -n "$exclude_expsyms"; then - $opt_dry_run || { - eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' - eval '$MV "$nlist"T "$nlist"' - } - fi - - if test -n "$export_symbols_regex"; then - $opt_dry_run || { - eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' - eval '$MV "$nlist"T "$nlist"' - } - fi - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - export_symbols=$output_objdir/$outputname.exp - $opt_dry_run || { - $RM $export_symbols - eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' - case $host in - *cygwin* | *mingw* | *cegcc* ) - eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' - eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' - ;; - esac - } - else - $opt_dry_run || { - eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' - eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' - eval '$MV "$nlist"T "$nlist"' - case $host in - *cygwin* | *mingw* | *cegcc* ) - eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' - eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' - ;; - esac - } - fi - fi - - for dlprefile in $dlprefiles; do - func_verbose "extracting global C symbols from '$dlprefile'" - func_basename "$dlprefile" - name=$func_basename_result - case $host in - *cygwin* | *mingw* | *cegcc* ) - # if an import library, we need to obtain dlname - if func_win32_import_lib_p "$dlprefile"; then - func_tr_sh "$dlprefile" - eval "curr_lafile=\$libfile_$func_tr_sh_result" - dlprefile_dlbasename= - if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then - # Use subshell, to avoid clobbering current variable values - dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` - if test -n "$dlprefile_dlname"; then - func_basename "$dlprefile_dlname" - dlprefile_dlbasename=$func_basename_result - else - # no lafile. user explicitly requested -dlpreopen . - $sharedlib_from_linklib_cmd "$dlprefile" - dlprefile_dlbasename=$sharedlib_from_linklib_result - fi - fi - $opt_dry_run || { - if test -n "$dlprefile_dlbasename"; then - eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' - else - func_warning "Could not compute DLL name from $name" - eval '$ECHO ": $name " >> "$nlist"' - fi - func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 - eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | - $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" - } - else # not an import lib - $opt_dry_run || { - eval '$ECHO ": $name " >> "$nlist"' - func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 - eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" - } - fi - ;; - *) - $opt_dry_run || { - eval '$ECHO ": $name " >> "$nlist"' - func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 - eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" - } - ;; - esac - done - - $opt_dry_run || { - # Make sure we have at least an empty file. - test -f "$nlist" || : > "$nlist" - - if test -n "$exclude_expsyms"; then - $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T - $MV "$nlist"T "$nlist" - fi - - # Try sorting and uniquifying the output. - if $GREP -v "^: " < "$nlist" | - if sort -k 3 /dev/null 2>&1; then - sort -k 3 - else - sort +2 - fi | - uniq > "$nlist"S; then - : - else - $GREP -v "^: " < "$nlist" > "$nlist"S - fi - - if test -f "$nlist"S; then - eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' - else - echo '/* NONE */' >> "$output_objdir/$my_dlsyms" - fi - - func_show_eval '$RM "${nlist}I"' - if test -n "$global_symbol_to_import"; then - eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I' - fi - - echo >> "$output_objdir/$my_dlsyms" "\ - -/* The mapping between symbol names and symbols. */ -typedef struct { - const char *name; - void *address; -} lt_dlsymlist; -extern LT_DLSYM_CONST lt_dlsymlist -lt_${my_prefix}_LTX_preloaded_symbols[];\ -" - - if test -s "$nlist"I; then - echo >> "$output_objdir/$my_dlsyms" "\ -static void lt_syminit(void) -{ - LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols; - for (; symbol->name; ++symbol) - {" - $SED 's/.*/ if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms" - echo >> "$output_objdir/$my_dlsyms" "\ - } -}" - fi - echo >> "$output_objdir/$my_dlsyms" "\ -LT_DLSYM_CONST lt_dlsymlist -lt_${my_prefix}_LTX_preloaded_symbols[] = -{ {\"$my_originator\", (void *) 0}," - - if test -s "$nlist"I; then - echo >> "$output_objdir/$my_dlsyms" "\ - {\"@INIT@\", (void *) <_syminit}," - fi - - case $need_lib_prefix in - no) - eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" - ;; - *) - eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" - ;; - esac - echo >> "$output_objdir/$my_dlsyms" "\ - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt_${my_prefix}_LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif\ -" - } # !$opt_dry_run - - pic_flag_for_symtable= - case "$compile_command " in - *" -static "*) ;; - *) - case $host in - # compiling the symbol table file with pic_flag works around - # a FreeBSD bug that causes programs to crash when -lm is - # linked before any other PIC object. But we must not use - # pic_flag when linking with -static. The problem exists in - # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. - *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) - pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; - *-*-hpux*) - pic_flag_for_symtable=" $pic_flag" ;; - *) - $my_pic_p && pic_flag_for_symtable=" $pic_flag" - ;; - esac - ;; - esac - symtab_cflags= - for arg in $LTCFLAGS; do - case $arg in - -pie | -fpie | -fPIE) ;; - *) func_append symtab_cflags " $arg" ;; - esac - done - - # Now compile the dynamic symbol file. - func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' - - # Clean up the generated files. - func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"' - - # Transform the symbol file into the correct name. - symfileobj=$output_objdir/${my_outputname}S.$objext - case $host in - *cygwin* | *mingw* | *cegcc* ) - if test -f "$output_objdir/$my_outputname.def"; then - compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` - else - compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` - fi - ;; - *) - compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` - ;; - esac - ;; - *) - func_fatal_error "unknown suffix for '$my_dlsyms'" - ;; - esac - else - # We keep going just in case the user didn't refer to - # lt_preloaded_symbols. The linker will fail if global_symbol_pipe - # really was required. - - # Nullify the symbol file. - compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` - fi -} - -# func_cygming_gnu_implib_p ARG -# This predicate returns with zero status (TRUE) if -# ARG is a GNU/binutils-style import library. Returns -# with nonzero status (FALSE) otherwise. -func_cygming_gnu_implib_p () -{ - $debug_cmd - - func_to_tool_file "$1" func_convert_file_msys_to_w32 - func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` - test -n "$func_cygming_gnu_implib_tmp" -} - -# func_cygming_ms_implib_p ARG -# This predicate returns with zero status (TRUE) if -# ARG is an MS-style import library. Returns -# with nonzero status (FALSE) otherwise. -func_cygming_ms_implib_p () -{ - $debug_cmd - - func_to_tool_file "$1" func_convert_file_msys_to_w32 - func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` - test -n "$func_cygming_ms_implib_tmp" -} - -# func_win32_libid arg -# return the library type of file 'arg' -# -# Need a lot of goo to handle *both* DLLs and import libs -# Has to be a shell function in order to 'eat' the argument -# that is supplied when $file_magic_command is called. -# Despite the name, also deal with 64 bit binaries. -func_win32_libid () -{ - $debug_cmd - - win32_libid_type=unknown - win32_fileres=`file -L $1 2>/dev/null` - case $win32_fileres in - *ar\ archive\ import\ library*) # definitely import - win32_libid_type="x86 archive import" - ;; - *ar\ archive*) # could be an import, or static - # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. - if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | - $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then - case $nm_interface in - "MS dumpbin") - if func_cygming_ms_implib_p "$1" || - func_cygming_gnu_implib_p "$1" - then - win32_nmres=import - else - win32_nmres= - fi - ;; - *) - func_to_tool_file "$1" func_convert_file_msys_to_w32 - win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | - $SED -n -e ' - 1,100{ - / I /{ - s|.*|import| - p - q - } - }'` - ;; - esac - case $win32_nmres in - import*) win32_libid_type="x86 archive import";; - *) win32_libid_type="x86 archive static";; - esac - fi - ;; - *DLL*) - win32_libid_type="x86 DLL" - ;; - *executable*) # but shell scripts are "executable" too... - case $win32_fileres in - *MS\ Windows\ PE\ Intel*) - win32_libid_type="x86 DLL" - ;; - esac - ;; - esac - $ECHO "$win32_libid_type" -} - -# func_cygming_dll_for_implib ARG -# -# Platform-specific function to extract the -# name of the DLL associated with the specified -# import library ARG. -# Invoked by eval'ing the libtool variable -# $sharedlib_from_linklib_cmd -# Result is available in the variable -# $sharedlib_from_linklib_result -func_cygming_dll_for_implib () -{ - $debug_cmd - - sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` -} - -# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs -# -# The is the core of a fallback implementation of a -# platform-specific function to extract the name of the -# DLL associated with the specified import library LIBNAME. -# -# SECTION_NAME is either .idata$6 or .idata$7, depending -# on the platform and compiler that created the implib. -# -# Echos the name of the DLL associated with the -# specified import library. -func_cygming_dll_for_implib_fallback_core () -{ - $debug_cmd - - match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` - $OBJDUMP -s --section "$1" "$2" 2>/dev/null | - $SED '/^Contents of section '"$match_literal"':/{ - # Place marker at beginning of archive member dllname section - s/.*/====MARK====/ - p - d - } - # These lines can sometimes be longer than 43 characters, but - # are always uninteresting - /:[ ]*file format pe[i]\{,1\}-/d - /^In archive [^:]*:/d - # Ensure marker is printed - /^====MARK====/p - # Remove all lines with less than 43 characters - /^.\{43\}/!d - # From remaining lines, remove first 43 characters - s/^.\{43\}//' | - $SED -n ' - # Join marker and all lines until next marker into a single line - /^====MARK====/ b para - H - $ b para - b - :para - x - s/\n//g - # Remove the marker - s/^====MARK====// - # Remove trailing dots and whitespace - s/[\. \t]*$// - # Print - /./p' | - # we now have a list, one entry per line, of the stringified - # contents of the appropriate section of all members of the - # archive that possess that section. Heuristic: eliminate - # all those that have a first or second character that is - # a '.' (that is, objdump's representation of an unprintable - # character.) This should work for all archives with less than - # 0x302f exports -- but will fail for DLLs whose name actually - # begins with a literal '.' or a single character followed by - # a '.'. - # - # Of those that remain, print the first one. - $SED -e '/^\./d;/^.\./d;q' -} - -# func_cygming_dll_for_implib_fallback ARG -# Platform-specific function to extract the -# name of the DLL associated with the specified -# import library ARG. -# -# This fallback implementation is for use when $DLLTOOL -# does not support the --identify-strict option. -# Invoked by eval'ing the libtool variable -# $sharedlib_from_linklib_cmd -# Result is available in the variable -# $sharedlib_from_linklib_result -func_cygming_dll_for_implib_fallback () -{ - $debug_cmd - - if func_cygming_gnu_implib_p "$1"; then - # binutils import library - sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` - elif func_cygming_ms_implib_p "$1"; then - # ms-generated import library - sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` - else - # unknown - sharedlib_from_linklib_result= - fi -} - - -# func_extract_an_archive dir oldlib -func_extract_an_archive () -{ - $debug_cmd - - f_ex_an_ar_dir=$1; shift - f_ex_an_ar_oldlib=$1 - if test yes = "$lock_old_archive_extraction"; then - lockfile=$f_ex_an_ar_oldlib.lock - until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do - func_echo "Waiting for $lockfile to be removed" - sleep 2 - done - fi - func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ - 'stat=$?; rm -f "$lockfile"; exit $stat' - if test yes = "$lock_old_archive_extraction"; then - $opt_dry_run || rm -f "$lockfile" - fi - if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then - : - else - func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" - fi -} - - -# func_extract_archives gentop oldlib ... -func_extract_archives () -{ - $debug_cmd - - my_gentop=$1; shift - my_oldlibs=${1+"$@"} - my_oldobjs= - my_xlib= - my_xabs= - my_xdir= - - for my_xlib in $my_oldlibs; do - # Extract the objects. - case $my_xlib in - [\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;; - *) my_xabs=`pwd`"/$my_xlib" ;; - esac - func_basename "$my_xlib" - my_xlib=$func_basename_result - my_xlib_u=$my_xlib - while :; do - case " $extracted_archives " in - *" $my_xlib_u "*) - func_arith $extracted_serial + 1 - extracted_serial=$func_arith_result - my_xlib_u=lt$extracted_serial-$my_xlib ;; - *) break ;; - esac - done - extracted_archives="$extracted_archives $my_xlib_u" - my_xdir=$my_gentop/$my_xlib_u - - func_mkdir_p "$my_xdir" - - case $host in - *-darwin*) - func_verbose "Extracting $my_xabs" - # Do not bother doing anything if just a dry run - $opt_dry_run || { - darwin_orig_dir=`pwd` - cd $my_xdir || exit $? - darwin_archive=$my_xabs - darwin_curdir=`pwd` - func_basename "$darwin_archive" - darwin_base_archive=$func_basename_result - darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` - if test -n "$darwin_arches"; then - darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` - darwin_arch= - func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" - for darwin_arch in $darwin_arches; do - func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch" - $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive" - cd "unfat-$$/$darwin_base_archive-$darwin_arch" - func_extract_an_archive "`pwd`" "$darwin_base_archive" - cd "$darwin_curdir" - $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" - done # $darwin_arches - ## Okay now we've a bunch of thin objects, gotta fatten them up :) - darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u` - darwin_file= - darwin_files= - for darwin_file in $darwin_filelist; do - darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` - $LIPO -create -output "$darwin_file" $darwin_files - done # $darwin_filelist - $RM -rf unfat-$$ - cd "$darwin_orig_dir" - else - cd $darwin_orig_dir - func_extract_an_archive "$my_xdir" "$my_xabs" - fi # $darwin_arches - } # !$opt_dry_run - ;; - *) - func_extract_an_archive "$my_xdir" "$my_xabs" - ;; - esac - my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` - done - - func_extract_archives_result=$my_oldobjs -} - - -# func_emit_wrapper [arg=no] -# -# Emit a libtool wrapper script on stdout. -# Don't directly open a file because we may want to -# incorporate the script contents within a cygwin/mingw -# wrapper executable. Must ONLY be called from within -# func_mode_link because it depends on a number of variables -# set therein. -# -# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR -# variable will take. If 'yes', then the emitted script -# will assume that the directory where it is stored is -# the $objdir directory. This is a cygwin/mingw-specific -# behavior. -func_emit_wrapper () -{ - func_emit_wrapper_arg1=${1-no} - - $ECHO "\ -#! $SHELL - -# $output - temporary wrapper script for $objdir/$outputname -# Generated by $PROGRAM (GNU $PACKAGE) $VERSION -# -# The $output program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of the build directory. -# If it is, it will not operate correctly. - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -sed_quote_subst='$sed_quote_subst' - -# Be Bourne compatible -if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac -fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -relink_command=\"$relink_command\" - -# This environment variable determines our operation mode. -if test \"\$libtool_install_magic\" = \"$magic\"; then - # install mode needs the following variables: - generated_by_libtool_version='$macro_version' - notinst_deplibs='$notinst_deplibs' -else - # When we are sourced in execute mode, \$file and \$ECHO are already set. - if test \"\$libtool_execute_magic\" != \"$magic\"; then - file=\"\$0\"" - - qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` - $ECHO "\ - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$1 -_LTECHO_EOF' -} - ECHO=\"$qECHO\" - fi - -# Very basic option parsing. These options are (a) specific to -# the libtool wrapper, (b) are identical between the wrapper -# /script/ and the wrapper /executable/ that is used only on -# windows platforms, and (c) all begin with the string "--lt-" -# (application programs are unlikely to have options that match -# this pattern). -# -# There are only two supported options: --lt-debug and -# --lt-dump-script. There is, deliberately, no --lt-help. -# -# The first argument to this parsing function should be the -# script's $0 value, followed by "$@". -lt_option_debug= -func_parse_lt_options () -{ - lt_script_arg0=\$0 - shift - for lt_opt - do - case \"\$lt_opt\" in - --lt-debug) lt_option_debug=1 ;; - --lt-dump-script) - lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` - test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. - lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` - cat \"\$lt_dump_D/\$lt_dump_F\" - exit 0 - ;; - --lt-*) - \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 - exit 1 - ;; - esac - done - - # Print the debug banner immediately: - if test -n \"\$lt_option_debug\"; then - echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2 - fi -} - -# Used when --lt-debug. Prints its arguments to stdout -# (redirection is the responsibility of the caller) -func_lt_dump_args () -{ - lt_dump_args_N=1; - for lt_arg - do - \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\" - lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` - done -} - -# Core function for launching the target application -func_exec_program_core () -{ -" - case $host in - # Backslashes separate directories on plain windows - *-*-mingw | *-*-os2* | *-cegcc*) - $ECHO "\ - if test -n \"\$lt_option_debug\"; then - \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2 - func_lt_dump_args \${1+\"\$@\"} 1>&2 - fi - exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} -" - ;; - - *) - $ECHO "\ - if test -n \"\$lt_option_debug\"; then - \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2 - func_lt_dump_args \${1+\"\$@\"} 1>&2 - fi - exec \"\$progdir/\$program\" \${1+\"\$@\"} -" - ;; - esac - $ECHO "\ - \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 - exit 1 -} - -# A function to encapsulate launching the target application -# Strips options in the --lt-* namespace from \$@ and -# launches target application with the remaining arguments. -func_exec_program () -{ - case \" \$* \" in - *\\ --lt-*) - for lt_wr_arg - do - case \$lt_wr_arg in - --lt-*) ;; - *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; - esac - shift - done ;; - esac - func_exec_program_core \${1+\"\$@\"} -} - - # Parse options - func_parse_lt_options \"\$0\" \${1+\"\$@\"} - - # Find the directory that this script lives in. - thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` - test \"x\$thisdir\" = \"x\$file\" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` - while test -n \"\$file\"; do - destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` - - # If there was a directory component, then change thisdir. - if test \"x\$destdir\" != \"x\$file\"; then - case \"\$destdir\" in - [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; - *) thisdir=\"\$thisdir/\$destdir\" ;; - esac - fi - - file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` - done - - # Usually 'no', except on cygwin/mingw when embedded into - # the cwrapper. - WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 - if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then - # special case for '.' - if test \"\$thisdir\" = \".\"; then - thisdir=\`pwd\` - fi - # remove .libs from thisdir - case \"\$thisdir\" in - *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; - $objdir ) thisdir=. ;; - esac - fi - - # Try to get the absolute directory name. - absdir=\`cd \"\$thisdir\" && pwd\` - test -n \"\$absdir\" && thisdir=\"\$absdir\" -" - - if test yes = "$fast_install"; then - $ECHO "\ - program=lt-'$outputname'$exeext - progdir=\"\$thisdir/$objdir\" - - if test ! -f \"\$progdir/\$program\" || - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\ - test \"X\$file\" != \"X\$progdir/\$program\"; }; then - - file=\"\$\$-\$program\" - - if test ! -d \"\$progdir\"; then - $MKDIR \"\$progdir\" - else - $RM \"\$progdir/\$file\" - fi" - - $ECHO "\ - - # relink executable if necessary - if test -n \"\$relink_command\"; then - if relink_command_output=\`eval \$relink_command 2>&1\`; then : - else - \$ECHO \"\$relink_command_output\" >&2 - $RM \"\$progdir/\$file\" - exit 1 - fi - fi - - $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || - { $RM \"\$progdir/\$program\"; - $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } - $RM \"\$progdir/\$file\" - fi" - else - $ECHO "\ - program='$outputname' - progdir=\"\$thisdir/$objdir\" -" - fi - - $ECHO "\ - - if test -f \"\$progdir/\$program\"; then" - - # fixup the dll searchpath if we need to. - # - # Fix the DLL searchpath if we need to. Do this before prepending - # to shlibpath, because on Windows, both are PATH and uninstalled - # libraries must come first. - if test -n "$dllsearchpath"; then - $ECHO "\ - # Add the dll search path components to the executable PATH - PATH=$dllsearchpath:\$PATH -" - fi - - # Export our shlibpath_var if we have one. - if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then - $ECHO "\ - # Add our own library path to $shlibpath_var - $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" - - # Some systems cannot cope with colon-terminated $shlibpath_var - # The second colon is a workaround for a bug in BeOS R4 sed - $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` - - export $shlibpath_var -" - fi - - $ECHO "\ - if test \"\$libtool_execute_magic\" != \"$magic\"; then - # Run the actual program with our arguments. - func_exec_program \${1+\"\$@\"} - fi - else - # The program doesn't exist. - \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2 - \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 - \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 - exit 1 - fi -fi\ -" -} - - -# func_emit_cwrapperexe_src -# emit the source code for a wrapper executable on stdout -# Must ONLY be called from within func_mode_link because -# it depends on a number of variable set therein. -func_emit_cwrapperexe_src () -{ - cat < -#include -#ifdef _MSC_VER -# include -# include -# include -#else -# include -# include -# ifdef __CYGWIN__ -# include -# endif -#endif -#include -#include -#include -#include -#include -#include -#include -#include - -#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0) - -/* declarations of non-ANSI functions */ -#if defined __MINGW32__ -# ifdef __STRICT_ANSI__ -int _putenv (const char *); -# endif -#elif defined __CYGWIN__ -# ifdef __STRICT_ANSI__ -char *realpath (const char *, char *); -int putenv (char *); -int setenv (const char *, const char *, int); -# endif -/* #elif defined other_platform || defined ... */ -#endif - -/* portability defines, excluding path handling macros */ -#if defined _MSC_VER -# define setmode _setmode -# define stat _stat -# define chmod _chmod -# define getcwd _getcwd -# define putenv _putenv -# define S_IXUSR _S_IEXEC -#elif defined __MINGW32__ -# define setmode _setmode -# define stat _stat -# define chmod _chmod -# define getcwd _getcwd -# define putenv _putenv -#elif defined __CYGWIN__ -# define HAVE_SETENV -# define FOPEN_WB "wb" -/* #elif defined other platforms ... */ -#endif - -#if defined PATH_MAX -# define LT_PATHMAX PATH_MAX -#elif defined MAXPATHLEN -# define LT_PATHMAX MAXPATHLEN -#else -# define LT_PATHMAX 1024 -#endif - -#ifndef S_IXOTH -# define S_IXOTH 0 -#endif -#ifndef S_IXGRP -# define S_IXGRP 0 -#endif - -/* path handling portability macros */ -#ifndef DIR_SEPARATOR -# define DIR_SEPARATOR '/' -# define PATH_SEPARATOR ':' -#endif - -#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \ - defined __OS2__ -# define HAVE_DOS_BASED_FILE_SYSTEM -# define FOPEN_WB "wb" -# ifndef DIR_SEPARATOR_2 -# define DIR_SEPARATOR_2 '\\' -# endif -# ifndef PATH_SEPARATOR_2 -# define PATH_SEPARATOR_2 ';' -# endif -#endif - -#ifndef DIR_SEPARATOR_2 -# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) -#else /* DIR_SEPARATOR_2 */ -# define IS_DIR_SEPARATOR(ch) \ - (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) -#endif /* DIR_SEPARATOR_2 */ - -#ifndef PATH_SEPARATOR_2 -# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) -#else /* PATH_SEPARATOR_2 */ -# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) -#endif /* PATH_SEPARATOR_2 */ - -#ifndef FOPEN_WB -# define FOPEN_WB "w" -#endif -#ifndef _O_BINARY -# define _O_BINARY 0 -#endif - -#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) -#define XFREE(stale) do { \ - if (stale) { free (stale); stale = 0; } \ -} while (0) - -#if defined LT_DEBUGWRAPPER -static int lt_debug = 1; -#else -static int lt_debug = 0; -#endif - -const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ - -void *xmalloc (size_t num); -char *xstrdup (const char *string); -const char *base_name (const char *name); -char *find_executable (const char *wrapper); -char *chase_symlinks (const char *pathspec); -int make_executable (const char *path); -int check_executable (const char *path); -char *strendzap (char *str, const char *pat); -void lt_debugprintf (const char *file, int line, const char *fmt, ...); -void lt_fatal (const char *file, int line, const char *message, ...); -static const char *nonnull (const char *s); -static const char *nonempty (const char *s); -void lt_setenv (const char *name, const char *value); -char *lt_extend_str (const char *orig_value, const char *add, int to_end); -void lt_update_exe_path (const char *name, const char *value); -void lt_update_lib_path (const char *name, const char *value); -char **prepare_spawn (char **argv); -void lt_dump_script (FILE *f); -EOF - - cat <= 0) - && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) - return 1; - else - return 0; -} - -int -make_executable (const char *path) -{ - int rval = 0; - struct stat st; - - lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", - nonempty (path)); - if ((!path) || (!*path)) - return 0; - - if (stat (path, &st) >= 0) - { - rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); - } - return rval; -} - -/* Searches for the full path of the wrapper. Returns - newly allocated full path name if found, NULL otherwise - Does not chase symlinks, even on platforms that support them. -*/ -char * -find_executable (const char *wrapper) -{ - int has_slash = 0; - const char *p; - const char *p_next; - /* static buffer for getcwd */ - char tmp[LT_PATHMAX + 1]; - size_t tmp_len; - char *concat_name; - - lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", - nonempty (wrapper)); - - if ((wrapper == NULL) || (*wrapper == '\0')) - return NULL; - - /* Absolute path? */ -#if defined HAVE_DOS_BASED_FILE_SYSTEM - if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') - { - concat_name = xstrdup (wrapper); - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - } - else - { -#endif - if (IS_DIR_SEPARATOR (wrapper[0])) - { - concat_name = xstrdup (wrapper); - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - } -#if defined HAVE_DOS_BASED_FILE_SYSTEM - } -#endif - - for (p = wrapper; *p; p++) - if (*p == '/') - { - has_slash = 1; - break; - } - if (!has_slash) - { - /* no slashes; search PATH */ - const char *path = getenv ("PATH"); - if (path != NULL) - { - for (p = path; *p; p = p_next) - { - const char *q; - size_t p_len; - for (q = p; *q; q++) - if (IS_PATH_SEPARATOR (*q)) - break; - p_len = (size_t) (q - p); - p_next = (*q == '\0' ? q : q + 1); - if (p_len == 0) - { - /* empty path: current directory */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", - nonnull (strerror (errno))); - tmp_len = strlen (tmp); - concat_name = - XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); - memcpy (concat_name, tmp, tmp_len); - concat_name[tmp_len] = '/'; - strcpy (concat_name + tmp_len + 1, wrapper); - } - else - { - concat_name = - XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); - memcpy (concat_name, p, p_len); - concat_name[p_len] = '/'; - strcpy (concat_name + p_len + 1, wrapper); - } - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - } - } - /* not found in PATH; assume curdir */ - } - /* Relative path | not found in path: prepend cwd */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", - nonnull (strerror (errno))); - tmp_len = strlen (tmp); - concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); - memcpy (concat_name, tmp, tmp_len); - concat_name[tmp_len] = '/'; - strcpy (concat_name + tmp_len + 1, wrapper); - - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - return NULL; -} - -char * -chase_symlinks (const char *pathspec) -{ -#ifndef S_ISLNK - return xstrdup (pathspec); -#else - char buf[LT_PATHMAX]; - struct stat s; - char *tmp_pathspec = xstrdup (pathspec); - char *p; - int has_symlinks = 0; - while (strlen (tmp_pathspec) && !has_symlinks) - { - lt_debugprintf (__FILE__, __LINE__, - "checking path component for symlinks: %s\n", - tmp_pathspec); - if (lstat (tmp_pathspec, &s) == 0) - { - if (S_ISLNK (s.st_mode) != 0) - { - has_symlinks = 1; - break; - } - - /* search backwards for last DIR_SEPARATOR */ - p = tmp_pathspec + strlen (tmp_pathspec) - 1; - while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) - p--; - if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) - { - /* no more DIR_SEPARATORS left */ - break; - } - *p = '\0'; - } - else - { - lt_fatal (__FILE__, __LINE__, - "error accessing file \"%s\": %s", - tmp_pathspec, nonnull (strerror (errno))); - } - } - XFREE (tmp_pathspec); - - if (!has_symlinks) - { - return xstrdup (pathspec); - } - - tmp_pathspec = realpath (pathspec, buf); - if (tmp_pathspec == 0) - { - lt_fatal (__FILE__, __LINE__, - "could not follow symlinks for %s", pathspec); - } - return xstrdup (tmp_pathspec); -#endif -} - -char * -strendzap (char *str, const char *pat) -{ - size_t len, patlen; - - assert (str != NULL); - assert (pat != NULL); - - len = strlen (str); - patlen = strlen (pat); - - if (patlen <= len) - { - str += len - patlen; - if (STREQ (str, pat)) - *str = '\0'; - } - return str; -} - -void -lt_debugprintf (const char *file, int line, const char *fmt, ...) -{ - va_list args; - if (lt_debug) - { - (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); - va_start (args, fmt); - (void) vfprintf (stderr, fmt, args); - va_end (args); - } -} - -static void -lt_error_core (int exit_status, const char *file, - int line, const char *mode, - const char *message, va_list ap) -{ - fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); - vfprintf (stderr, message, ap); - fprintf (stderr, ".\n"); - - if (exit_status >= 0) - exit (exit_status); -} - -void -lt_fatal (const char *file, int line, const char *message, ...) -{ - va_list ap; - va_start (ap, message); - lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); - va_end (ap); -} - -static const char * -nonnull (const char *s) -{ - return s ? s : "(null)"; -} - -static const char * -nonempty (const char *s) -{ - return (s && !*s) ? "(empty)" : nonnull (s); -} - -void -lt_setenv (const char *name, const char *value) -{ - lt_debugprintf (__FILE__, __LINE__, - "(lt_setenv) setting '%s' to '%s'\n", - nonnull (name), nonnull (value)); - { -#ifdef HAVE_SETENV - /* always make a copy, for consistency with !HAVE_SETENV */ - char *str = xstrdup (value); - setenv (name, str, 1); -#else - size_t len = strlen (name) + 1 + strlen (value) + 1; - char *str = XMALLOC (char, len); - sprintf (str, "%s=%s", name, value); - if (putenv (str) != EXIT_SUCCESS) - { - XFREE (str); - } -#endif - } -} - -char * -lt_extend_str (const char *orig_value, const char *add, int to_end) -{ - char *new_value; - if (orig_value && *orig_value) - { - size_t orig_value_len = strlen (orig_value); - size_t add_len = strlen (add); - new_value = XMALLOC (char, add_len + orig_value_len + 1); - if (to_end) - { - strcpy (new_value, orig_value); - strcpy (new_value + orig_value_len, add); - } - else - { - strcpy (new_value, add); - strcpy (new_value + add_len, orig_value); - } - } - else - { - new_value = xstrdup (add); - } - return new_value; -} - -void -lt_update_exe_path (const char *name, const char *value) -{ - lt_debugprintf (__FILE__, __LINE__, - "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", - nonnull (name), nonnull (value)); - - if (name && *name && value && *value) - { - char *new_value = lt_extend_str (getenv (name), value, 0); - /* some systems can't cope with a ':'-terminated path #' */ - size_t len = strlen (new_value); - while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1])) - { - new_value[--len] = '\0'; - } - lt_setenv (name, new_value); - XFREE (new_value); - } -} - -void -lt_update_lib_path (const char *name, const char *value) -{ - lt_debugprintf (__FILE__, __LINE__, - "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", - nonnull (name), nonnull (value)); - - if (name && *name && value && *value) - { - char *new_value = lt_extend_str (getenv (name), value, 0); - lt_setenv (name, new_value); - XFREE (new_value); - } -} - -EOF - case $host_os in - mingw*) - cat <<"EOF" - -/* Prepares an argument vector before calling spawn(). - Note that spawn() does not by itself call the command interpreter - (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : - ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); - GetVersionEx(&v); - v.dwPlatformId == VER_PLATFORM_WIN32_NT; - }) ? "cmd.exe" : "command.com"). - Instead it simply concatenates the arguments, separated by ' ', and calls - CreateProcess(). We must quote the arguments since Win32 CreateProcess() - interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a - special way: - - Space and tab are interpreted as delimiters. They are not treated as - delimiters if they are surrounded by double quotes: "...". - - Unescaped double quotes are removed from the input. Their only effect is - that within double quotes, space and tab are treated like normal - characters. - - Backslashes not followed by double quotes are not special. - - But 2*n+1 backslashes followed by a double quote become - n backslashes followed by a double quote (n >= 0): - \" -> " - \\\" -> \" - \\\\\" -> \\" - */ -#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" -#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" -char ** -prepare_spawn (char **argv) -{ - size_t argc; - char **new_argv; - size_t i; - - /* Count number of arguments. */ - for (argc = 0; argv[argc] != NULL; argc++) - ; - - /* Allocate new argument vector. */ - new_argv = XMALLOC (char *, argc + 1); - - /* Put quoted arguments into the new argument vector. */ - for (i = 0; i < argc; i++) - { - const char *string = argv[i]; - - if (string[0] == '\0') - new_argv[i] = xstrdup ("\"\""); - else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) - { - int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); - size_t length; - unsigned int backslashes; - const char *s; - char *quoted_string; - char *p; - - length = 0; - backslashes = 0; - if (quote_around) - length++; - for (s = string; *s != '\0'; s++) - { - char c = *s; - if (c == '"') - length += backslashes + 1; - length++; - if (c == '\\') - backslashes++; - else - backslashes = 0; - } - if (quote_around) - length += backslashes + 1; - - quoted_string = XMALLOC (char, length + 1); - - p = quoted_string; - backslashes = 0; - if (quote_around) - *p++ = '"'; - for (s = string; *s != '\0'; s++) - { - char c = *s; - if (c == '"') - { - unsigned int j; - for (j = backslashes + 1; j > 0; j--) - *p++ = '\\'; - } - *p++ = c; - if (c == '\\') - backslashes++; - else - backslashes = 0; - } - if (quote_around) - { - unsigned int j; - for (j = backslashes; j > 0; j--) - *p++ = '\\'; - *p++ = '"'; - } - *p = '\0'; - - new_argv[i] = quoted_string; - } - else - new_argv[i] = (char *) string; - } - new_argv[argc] = NULL; - - return new_argv; -} -EOF - ;; - esac - - cat <<"EOF" -void lt_dump_script (FILE* f) -{ -EOF - func_emit_wrapper yes | - $SED -n -e ' -s/^\(.\{79\}\)\(..*\)/\1\ -\2/ -h -s/\([\\"]\)/\\\1/g -s/$/\\n/ -s/\([^\n]*\).*/ fputs ("\1", f);/p -g -D' - cat <<"EOF" -} -EOF -} -# end: func_emit_cwrapperexe_src - -# func_win32_import_lib_p ARG -# True if ARG is an import lib, as indicated by $file_magic_cmd -func_win32_import_lib_p () -{ - $debug_cmd - - case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in - *import*) : ;; - *) false ;; - esac -} - -# func_suncc_cstd_abi -# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!! -# Several compiler flags select an ABI that is incompatible with the -# Cstd library. Avoid specifying it if any are in CXXFLAGS. -func_suncc_cstd_abi () -{ - $debug_cmd - - case " $compile_command " in - *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*) - suncc_use_cstd_abi=no - ;; - *) - suncc_use_cstd_abi=yes - ;; - esac -} - -# func_mode_link arg... -func_mode_link () -{ - $debug_cmd - - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) - # It is impossible to link a dll without this setting, and - # we shouldn't force the makefile maintainer to figure out - # what system we are compiling for in order to pass an extra - # flag for every libtool invocation. - # allow_undefined=no - - # FIXME: Unfortunately, there are problems with the above when trying - # to make a dll that has undefined symbols, in which case not - # even a static library is built. For now, we need to specify - # -no-undefined on the libtool link line when we can be certain - # that all symbols are satisfied, otherwise we get a static library. - allow_undefined=yes - ;; - *) - allow_undefined=yes - ;; - esac - libtool_args=$nonopt - base_compile="$nonopt $@" - compile_command=$nonopt - finalize_command=$nonopt - - compile_rpath= - finalize_rpath= - compile_shlibpath= - finalize_shlibpath= - convenience= - old_convenience= - deplibs= - old_deplibs= - compiler_flags= - linker_flags= - dllsearchpath= - lib_search_path=`pwd` - inst_prefix_dir= - new_inherited_linker_flags= - - avoid_version=no - bindir= - dlfiles= - dlprefiles= - dlself=no - export_dynamic=no - export_symbols= - export_symbols_regex= - generated= - libobjs= - ltlibs= - module=no - no_install=no - objs= - os2dllname= - non_pic_objects= - precious_files_regex= - prefer_static_libs=no - preload=false - prev= - prevarg= - release= - rpath= - xrpath= - perm_rpath= - temp_rpath= - thread_safe=no - vinfo= - vinfo_number=no - weak_libs= - single_module=$wl-single_module - func_infer_tag $base_compile - - # We need to know -static, to get the right output filenames. - for arg - do - case $arg in - -shared) - test yes != "$build_libtool_libs" \ - && func_fatal_configuration "cannot build a shared library" - build_old_libs=no - break - ;; - -all-static | -static | -static-libtool-libs) - case $arg in - -all-static) - if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then - func_warning "complete static linking is impossible in this configuration" - fi - if test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=yes - ;; - -static) - if test -z "$pic_flag" && test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=built - ;; - -static-libtool-libs) - if test -z "$pic_flag" && test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=yes - ;; - esac - build_libtool_libs=no - build_old_libs=yes - break - ;; - esac - done - - # See if our shared archives depend on static archives. - test -n "$old_archive_from_new_cmds" && build_old_libs=yes - - # Go through the arguments, transforming them on the way. - while test "$#" -gt 0; do - arg=$1 - shift - func_quote_for_eval "$arg" - qarg=$func_quote_for_eval_unquoted_result - func_append libtool_args " $func_quote_for_eval_result" - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case $prev in - output) - func_append compile_command " @OUTPUT@" - func_append finalize_command " @OUTPUT@" - ;; - esac - - case $prev in - bindir) - bindir=$arg - prev= - continue - ;; - dlfiles|dlprefiles) - $preload || { - # Add the symbol object into the linking commands. - func_append compile_command " @SYMFILE@" - func_append finalize_command " @SYMFILE@" - preload=: - } - case $arg in - *.la | *.lo) ;; # We handle these cases below. - force) - if test no = "$dlself"; then - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - self) - if test dlprefiles = "$prev"; then - dlself=yes - elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then - dlself=yes - else - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - *) - if test dlfiles = "$prev"; then - func_append dlfiles " $arg" - else - func_append dlprefiles " $arg" - fi - prev= - continue - ;; - esac - ;; - expsyms) - export_symbols=$arg - test -f "$arg" \ - || func_fatal_error "symbol file '$arg' does not exist" - prev= - continue - ;; - expsyms_regex) - export_symbols_regex=$arg - prev= - continue - ;; - framework) - case $host in - *-*-darwin*) - case "$deplibs " in - *" $qarg.ltframework "*) ;; - *) func_append deplibs " $qarg.ltframework" # this is fixed later - ;; - esac - ;; - esac - prev= - continue - ;; - inst_prefix) - inst_prefix_dir=$arg - prev= - continue - ;; - mllvm) - # Clang does not use LLVM to link, so we can simply discard any - # '-mllvm $arg' options when doing the link step. - prev= - continue - ;; - objectlist) - if test -f "$arg"; then - save_arg=$arg - moreargs= - for fil in `cat "$save_arg"` - do -# func_append moreargs " $fil" - arg=$fil - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if func_lalib_unsafe_p "$arg"; then - pic_object= - non_pic_object= - - # Read the .lo file - func_source "$arg" - - if test -z "$pic_object" || - test -z "$non_pic_object" || - test none = "$pic_object" && - test none = "$non_pic_object"; then - func_fatal_error "cannot find name of object for '$arg'" - fi - - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir=$func_dirname_result - - if test none != "$pic_object"; then - # Prepend the subdirectory the object is found in. - pic_object=$xdir$pic_object - - if test dlfiles = "$prev"; then - if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then - func_append dlfiles " $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - # CHECK ME: I think I busted this. -Ossama - if test dlprefiles = "$prev"; then - # Preload the old-style object. - func_append dlprefiles " $pic_object" - prev= - fi - - # A PIC object. - func_append libobjs " $pic_object" - arg=$pic_object - fi - - # Non-PIC object. - if test none != "$non_pic_object"; then - # Prepend the subdirectory the object is found in. - non_pic_object=$xdir$non_pic_object - - # A standard non-PIC object - func_append non_pic_objects " $non_pic_object" - if test -z "$pic_object" || test none = "$pic_object"; then - arg=$non_pic_object - fi - else - # If the PIC object exists, use it instead. - # $xdir was prepended to $pic_object above. - non_pic_object=$pic_object - func_append non_pic_objects " $non_pic_object" - fi - else - # Only an error if not doing a dry-run. - if $opt_dry_run; then - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir=$func_dirname_result - - func_lo2o "$arg" - pic_object=$xdir$objdir/$func_lo2o_result - non_pic_object=$xdir$func_lo2o_result - func_append libobjs " $pic_object" - func_append non_pic_objects " $non_pic_object" - else - func_fatal_error "'$arg' is not a valid libtool object" - fi - fi - done - else - func_fatal_error "link input file '$arg' does not exist" - fi - arg=$save_arg - prev= - continue - ;; - os2dllname) - os2dllname=$arg - prev= - continue - ;; - precious_regex) - precious_files_regex=$arg - prev= - continue - ;; - release) - release=-$arg - prev= - continue - ;; - rpath | xrpath) - # We need an absolute path. - case $arg in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - func_fatal_error "only absolute run-paths are allowed" - ;; - esac - if test rpath = "$prev"; then - case "$rpath " in - *" $arg "*) ;; - *) func_append rpath " $arg" ;; - esac - else - case "$xrpath " in - *" $arg "*) ;; - *) func_append xrpath " $arg" ;; - esac - fi - prev= - continue - ;; - shrext) - shrext_cmds=$arg - prev= - continue - ;; - weak) - func_append weak_libs " $arg" - prev= - continue - ;; - xcclinker) - func_append linker_flags " $qarg" - func_append compiler_flags " $qarg" - prev= - func_append compile_command " $qarg" - func_append finalize_command " $qarg" - continue - ;; - xcompiler) - func_append compiler_flags " $qarg" - prev= - func_append compile_command " $qarg" - func_append finalize_command " $qarg" - continue - ;; - xlinker) - func_append linker_flags " $qarg" - func_append compiler_flags " $wl$qarg" - prev= - func_append compile_command " $wl$qarg" - func_append finalize_command " $wl$qarg" - continue - ;; - *) - eval "$prev=\"\$arg\"" - prev= - continue - ;; - esac - fi # test -n "$prev" - - prevarg=$arg - - case $arg in - -all-static) - if test -n "$link_static_flag"; then - # See comment for -static flag below, for more details. - func_append compile_command " $link_static_flag" - func_append finalize_command " $link_static_flag" - fi - continue - ;; - - -allow-undefined) - # FIXME: remove this flag sometime in the future. - func_fatal_error "'-allow-undefined' must not be used because it is the default" - ;; - - -avoid-version) - avoid_version=yes - continue - ;; - - -bindir) - prev=bindir - continue - ;; - - -dlopen) - prev=dlfiles - continue - ;; - - -dlpreopen) - prev=dlprefiles - continue - ;; - - -export-dynamic) - export_dynamic=yes - continue - ;; - - -export-symbols | -export-symbols-regex) - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - func_fatal_error "more than one -exported-symbols argument is not allowed" - fi - if test X-export-symbols = "X$arg"; then - prev=expsyms - else - prev=expsyms_regex - fi - continue - ;; - - -framework) - prev=framework - continue - ;; - - -inst-prefix-dir) - prev=inst_prefix - continue - ;; - - # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* - # so, if we see these flags be careful not to treat them like -L - -L[A-Z][A-Z]*:*) - case $with_gcc/$host in - no/*-*-irix* | /*-*-irix*) - func_append compile_command " $arg" - func_append finalize_command " $arg" - ;; - esac - continue - ;; - - -L*) - func_stripname "-L" '' "$arg" - if test -z "$func_stripname_result"; then - if test "$#" -gt 0; then - func_fatal_error "require no space between '-L' and '$1'" - else - func_fatal_error "need path for '-L' option" - fi - fi - func_resolve_sysroot "$func_stripname_result" - dir=$func_resolve_sysroot_result - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - absdir=`cd "$dir" && pwd` - test -z "$absdir" && \ - func_fatal_error "cannot determine absolute directory name of '$dir'" - dir=$absdir - ;; - esac - case "$deplibs " in - *" -L$dir "* | *" $arg "*) - # Will only happen for absolute or sysroot arguments - ;; - *) - # Preserve sysroot, but never include relative directories - case $dir in - [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; - *) func_append deplibs " -L$dir" ;; - esac - func_append lib_search_path " $dir" - ;; - esac - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) - testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` - case :$dllsearchpath: in - *":$dir:"*) ;; - ::) dllsearchpath=$dir;; - *) func_append dllsearchpath ":$dir";; - esac - case :$dllsearchpath: in - *":$testbindir:"*) ;; - ::) dllsearchpath=$testbindir;; - *) func_append dllsearchpath ":$testbindir";; - esac - ;; - esac - continue - ;; - - -l*) - if test X-lc = "X$arg" || test X-lm = "X$arg"; then - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) - # These systems don't actually have a C or math library (as such) - continue - ;; - *-*-os2*) - # These systems don't actually have a C library (as such) - test X-lc = "X$arg" && continue - ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*) - # Do not include libc due to us having libc/libc_r. - test X-lc = "X$arg" && continue - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C and math libraries are in the System framework - func_append deplibs " System.ltframework" - continue - ;; - *-*-sco3.2v5* | *-*-sco5v6*) - # Causes problems with __ctype - test X-lc = "X$arg" && continue - ;; - *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) - # Compiler inserts libc in the correct place for threads to work - test X-lc = "X$arg" && continue - ;; - esac - elif test X-lc_r = "X$arg"; then - case $host in - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*) - # Do not include libc_r directly, use -pthread flag. - continue - ;; - esac - fi - func_append deplibs " $arg" - continue - ;; - - -mllvm) - prev=mllvm - continue - ;; - - -module) - module=yes - continue - ;; - - # Tru64 UNIX uses -model [arg] to determine the layout of C++ - # classes, name mangling, and exception handling. - # Darwin uses the -arch flag to determine output architecture. - -model|-arch|-isysroot|--sysroot) - func_append compiler_flags " $arg" - func_append compile_command " $arg" - func_append finalize_command " $arg" - prev=xcompiler - continue - ;; - - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ - |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) - func_append compiler_flags " $arg" - func_append compile_command " $arg" - func_append finalize_command " $arg" - case "$new_inherited_linker_flags " in - *" $arg "*) ;; - * ) func_append new_inherited_linker_flags " $arg" ;; - esac - continue - ;; - - -multi_module) - single_module=$wl-multi_module - continue - ;; - - -no-fast-install) - fast_install=no - continue - ;; - - -no-install) - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) - # The PATH hackery in wrapper scripts is required on Windows - # and Darwin in order for the loader to find any dlls it needs. - func_warning "'-no-install' is ignored for $host" - func_warning "assuming '-no-fast-install' instead" - fast_install=no - ;; - *) no_install=yes ;; - esac - continue - ;; - - -no-undefined) - allow_undefined=no - continue - ;; - - -objectlist) - prev=objectlist - continue - ;; - - -os2dllname) - prev=os2dllname - continue - ;; - - -o) prev=output ;; - - -precious-files-regex) - prev=precious_regex - continue - ;; - - -release) - prev=release - continue - ;; - - -rpath) - prev=rpath - continue - ;; - - -R) - prev=xrpath - continue - ;; - - -R*) - func_stripname '-R' '' "$arg" - dir=$func_stripname_result - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - =*) - func_stripname '=' '' "$dir" - dir=$lt_sysroot$func_stripname_result - ;; - *) - func_fatal_error "only absolute run-paths are allowed" - ;; - esac - case "$xrpath " in - *" $dir "*) ;; - *) func_append xrpath " $dir" ;; - esac - continue - ;; - - -shared) - # The effects of -shared are defined in a previous loop. - continue - ;; - - -shrext) - prev=shrext - continue - ;; - - -static | -static-libtool-libs) - # The effects of -static are defined in a previous loop. - # We used to do the same as -all-static on platforms that - # didn't have a PIC flag, but the assumption that the effects - # would be equivalent was wrong. It would break on at least - # Digital Unix and AIX. - continue - ;; - - -thread-safe) - thread_safe=yes - continue - ;; - - -version-info) - prev=vinfo - continue - ;; - - -version-number) - prev=vinfo - vinfo_number=yes - continue - ;; - - -weak) - prev=weak - continue - ;; - - -Wc,*) - func_stripname '-Wc,' '' "$arg" - args=$func_stripname_result - arg= - save_ifs=$IFS; IFS=, - for flag in $args; do - IFS=$save_ifs - func_quote_for_eval "$flag" - func_append arg " $func_quote_for_eval_result" - func_append compiler_flags " $func_quote_for_eval_result" - done - IFS=$save_ifs - func_stripname ' ' '' "$arg" - arg=$func_stripname_result - ;; - - -Wl,*) - func_stripname '-Wl,' '' "$arg" - args=$func_stripname_result - arg= - save_ifs=$IFS; IFS=, - for flag in $args; do - IFS=$save_ifs - func_quote_for_eval "$flag" - func_append arg " $wl$func_quote_for_eval_result" - func_append compiler_flags " $wl$func_quote_for_eval_result" - func_append linker_flags " $func_quote_for_eval_result" - done - IFS=$save_ifs - func_stripname ' ' '' "$arg" - arg=$func_stripname_result - ;; - - -Xcompiler) - prev=xcompiler - continue - ;; - - -Xlinker) - prev=xlinker - continue - ;; - - -XCClinker) - prev=xcclinker - continue - ;; - - # -msg_* for osf cc - -msg_*) - func_quote_for_eval "$arg" - arg=$func_quote_for_eval_result - ;; - - # Flags to be passed through unchanged, with rationale: - # -64, -mips[0-9] enable 64-bit mode for the SGI compiler - # -r[0-9][0-9]* specify processor for the SGI compiler - # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler - # +DA*, +DD* enable 64-bit mode for the HP compiler - # -q* compiler args for the IBM compiler - # -m*, -t[45]*, -txscale* architecture-specific flags for GCC - # -F/path path to uninstalled frameworks, gcc on darwin - # -p, -pg, --coverage, -fprofile-* profiling flags for GCC - # -fstack-protector* stack protector flags for GCC - # @file GCC response files - # -tp=* Portland pgcc target processor selection - # --sysroot=* for sysroot support - # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization - # -stdlib=* select c++ std lib with clang - -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ - -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ - -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*) - func_quote_for_eval "$arg" - arg=$func_quote_for_eval_result - func_append compile_command " $arg" - func_append finalize_command " $arg" - func_append compiler_flags " $arg" - continue - ;; - - -Z*) - if test os2 = "`expr $host : '.*\(os2\)'`"; then - # OS/2 uses -Zxxx to specify OS/2-specific options - compiler_flags="$compiler_flags $arg" - func_append compile_command " $arg" - func_append finalize_command " $arg" - case $arg in - -Zlinker | -Zstack) - prev=xcompiler - ;; - esac - continue - else - # Otherwise treat like 'Some other compiler flag' below - func_quote_for_eval "$arg" - arg=$func_quote_for_eval_result - fi - ;; - - # Some other compiler flag. - -* | +*) - func_quote_for_eval "$arg" - arg=$func_quote_for_eval_result - ;; - - *.$objext) - # A standard object. - func_append objs " $arg" - ;; - - *.lo) - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if func_lalib_unsafe_p "$arg"; then - pic_object= - non_pic_object= - - # Read the .lo file - func_source "$arg" - - if test -z "$pic_object" || - test -z "$non_pic_object" || - test none = "$pic_object" && - test none = "$non_pic_object"; then - func_fatal_error "cannot find name of object for '$arg'" - fi - - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir=$func_dirname_result - - test none = "$pic_object" || { - # Prepend the subdirectory the object is found in. - pic_object=$xdir$pic_object - - if test dlfiles = "$prev"; then - if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then - func_append dlfiles " $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - # CHECK ME: I think I busted this. -Ossama - if test dlprefiles = "$prev"; then - # Preload the old-style object. - func_append dlprefiles " $pic_object" - prev= - fi - - # A PIC object. - func_append libobjs " $pic_object" - arg=$pic_object - } - - # Non-PIC object. - if test none != "$non_pic_object"; then - # Prepend the subdirectory the object is found in. - non_pic_object=$xdir$non_pic_object - - # A standard non-PIC object - func_append non_pic_objects " $non_pic_object" - if test -z "$pic_object" || test none = "$pic_object"; then - arg=$non_pic_object - fi - else - # If the PIC object exists, use it instead. - # $xdir was prepended to $pic_object above. - non_pic_object=$pic_object - func_append non_pic_objects " $non_pic_object" - fi - else - # Only an error if not doing a dry-run. - if $opt_dry_run; then - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir=$func_dirname_result - - func_lo2o "$arg" - pic_object=$xdir$objdir/$func_lo2o_result - non_pic_object=$xdir$func_lo2o_result - func_append libobjs " $pic_object" - func_append non_pic_objects " $non_pic_object" - else - func_fatal_error "'$arg' is not a valid libtool object" - fi - fi - ;; - - *.$libext) - # An archive. - func_append deplibs " $arg" - func_append old_deplibs " $arg" - continue - ;; - - *.la) - # A libtool-controlled library. - - func_resolve_sysroot "$arg" - if test dlfiles = "$prev"; then - # This library was specified with -dlopen. - func_append dlfiles " $func_resolve_sysroot_result" - prev= - elif test dlprefiles = "$prev"; then - # The library was specified with -dlpreopen. - func_append dlprefiles " $func_resolve_sysroot_result" - prev= - else - func_append deplibs " $func_resolve_sysroot_result" - fi - continue - ;; - - # Some other compiler argument. - *) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - func_quote_for_eval "$arg" - arg=$func_quote_for_eval_result - ;; - esac # arg - - # Now actually substitute the argument into the commands. - if test -n "$arg"; then - func_append compile_command " $arg" - func_append finalize_command " $arg" - fi - done # argument parsing loop - - test -n "$prev" && \ - func_fatal_help "the '$prevarg' option requires an argument" - - if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then - eval arg=\"$export_dynamic_flag_spec\" - func_append compile_command " $arg" - func_append finalize_command " $arg" - fi - - oldlibs= - # calculate the name of the file, without its directory - func_basename "$output" - outputname=$func_basename_result - libobjs_save=$libobjs - - if test -n "$shlibpath_var"; then - # get the directories listed in $shlibpath_var - eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\` - else - shlib_search_path= - fi - eval sys_lib_search_path=\"$sys_lib_search_path_spec\" - eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" - - # Definition is injected by LT_CONFIG during libtool generation. - func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH" - - func_dirname "$output" "/" "" - output_objdir=$func_dirname_result$objdir - func_to_tool_file "$output_objdir/" - tool_output_objdir=$func_to_tool_file_result - # Create the object directory. - func_mkdir_p "$output_objdir" - - # Determine the type of output - case $output in - "") - func_fatal_help "you must specify an output file" - ;; - *.$libext) linkmode=oldlib ;; - *.lo | *.$objext) linkmode=obj ;; - *.la) linkmode=lib ;; - *) linkmode=prog ;; # Anything else should be a program. - esac - - specialdeplibs= - - libs= - # Find all interdependent deplibs by searching for libraries - # that are linked more than once (e.g. -la -lb -la) - for deplib in $deplibs; do - if $opt_preserve_dup_deps; then - case "$libs " in - *" $deplib "*) func_append specialdeplibs " $deplib" ;; - esac - fi - func_append libs " $deplib" - done - - if test lib = "$linkmode"; then - libs="$predeps $libs $compiler_lib_search_path $postdeps" - - # Compute libraries that are listed more than once in $predeps - # $postdeps and mark them as special (i.e., whose duplicates are - # not to be eliminated). - pre_post_deps= - if $opt_duplicate_compiler_generated_deps; then - for pre_post_dep in $predeps $postdeps; do - case "$pre_post_deps " in - *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; - esac - func_append pre_post_deps " $pre_post_dep" - done - fi - pre_post_deps= - fi - - deplibs= - newdependency_libs= - newlib_search_path= - need_relink=no # whether we're linking any uninstalled libtool libraries - notinst_deplibs= # not-installed libtool libraries - notinst_path= # paths that contain not-installed libtool libraries - - case $linkmode in - lib) - passes="conv dlpreopen link" - for file in $dlfiles $dlprefiles; do - case $file in - *.la) ;; - *) - func_fatal_help "libraries can '-dlopen' only libtool libraries: $file" - ;; - esac - done - ;; - prog) - compile_deplibs= - finalize_deplibs= - alldeplibs=false - newdlfiles= - newdlprefiles= - passes="conv scan dlopen dlpreopen link" - ;; - *) passes="conv" - ;; - esac - - for pass in $passes; do - # The preopen pass in lib mode reverses $deplibs; put it back here - # so that -L comes before libs that need it for instance... - if test lib,link = "$linkmode,$pass"; then - ## FIXME: Find the place where the list is rebuilt in the wrong - ## order, and fix it there properly - tmp_deplibs= - for deplib in $deplibs; do - tmp_deplibs="$deplib $tmp_deplibs" - done - deplibs=$tmp_deplibs - fi - - if test lib,link = "$linkmode,$pass" || - test prog,scan = "$linkmode,$pass"; then - libs=$deplibs - deplibs= - fi - if test prog = "$linkmode"; then - case $pass in - dlopen) libs=$dlfiles ;; - dlpreopen) libs=$dlprefiles ;; - link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; - esac - fi - if test lib,dlpreopen = "$linkmode,$pass"; then - # Collect and forward deplibs of preopened libtool libs - for lib in $dlprefiles; do - # Ignore non-libtool-libs - dependency_libs= - func_resolve_sysroot "$lib" - case $lib in - *.la) func_source "$func_resolve_sysroot_result" ;; - esac - - # Collect preopened libtool deplibs, except any this library - # has declared as weak libs - for deplib in $dependency_libs; do - func_basename "$deplib" - deplib_base=$func_basename_result - case " $weak_libs " in - *" $deplib_base "*) ;; - *) func_append deplibs " $deplib" ;; - esac - done - done - libs=$dlprefiles - fi - if test dlopen = "$pass"; then - # Collect dlpreopened libraries - save_deplibs=$deplibs - deplibs= - fi - - for deplib in $libs; do - lib= - found=false - case $deplib in - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ - |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) - if test prog,link = "$linkmode,$pass"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - func_append compiler_flags " $deplib" - if test lib = "$linkmode"; then - case "$new_inherited_linker_flags " in - *" $deplib "*) ;; - * ) func_append new_inherited_linker_flags " $deplib" ;; - esac - fi - fi - continue - ;; - -l*) - if test lib != "$linkmode" && test prog != "$linkmode"; then - func_warning "'-l' is ignored for archives/objects" - continue - fi - func_stripname '-l' '' "$deplib" - name=$func_stripname_result - if test lib = "$linkmode"; then - searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" - else - searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" - fi - for searchdir in $searchdirs; do - for search_ext in .la $std_shrext .so .a; do - # Search the libtool library - lib=$searchdir/lib$name$search_ext - if test -f "$lib"; then - if test .la = "$search_ext"; then - found=: - else - found=false - fi - break 2 - fi - done - done - if $found; then - # deplib is a libtool library - # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, - # We need to do some special things here, and not later. - if test yes = "$allow_libtool_libs_with_static_runtimes"; then - case " $predeps $postdeps " in - *" $deplib "*) - if func_lalib_p "$lib"; then - library_names= - old_library= - func_source "$lib" - for l in $old_library $library_names; do - ll=$l - done - if test "X$ll" = "X$old_library"; then # only static version available - found=false - func_dirname "$lib" "" "." - ladir=$func_dirname_result - lib=$ladir/$old_library - if test prog,link = "$linkmode,$pass"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs" - fi - continue - fi - fi - ;; - *) ;; - esac - fi - else - # deplib doesn't seem to be a libtool library - if test prog,link = "$linkmode,$pass"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs" - fi - continue - fi - ;; # -l - *.ltframework) - if test prog,link = "$linkmode,$pass"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - if test lib = "$linkmode"; then - case "$new_inherited_linker_flags " in - *" $deplib "*) ;; - * ) func_append new_inherited_linker_flags " $deplib" ;; - esac - fi - fi - continue - ;; - -L*) - case $linkmode in - lib) - deplibs="$deplib $deplibs" - test conv = "$pass" && continue - newdependency_libs="$deplib $newdependency_libs" - func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - func_append newlib_search_path " $func_resolve_sysroot_result" - ;; - prog) - if test conv = "$pass"; then - deplibs="$deplib $deplibs" - continue - fi - if test scan = "$pass"; then - deplibs="$deplib $deplibs" - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - func_append newlib_search_path " $func_resolve_sysroot_result" - ;; - *) - func_warning "'-L' is ignored for archives/objects" - ;; - esac # linkmode - continue - ;; # -L - -R*) - if test link = "$pass"; then - func_stripname '-R' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - dir=$func_resolve_sysroot_result - # Make sure the xrpath contains only unique directories. - case "$xrpath " in - *" $dir "*) ;; - *) func_append xrpath " $dir" ;; - esac - fi - deplibs="$deplib $deplibs" - continue - ;; - *.la) - func_resolve_sysroot "$deplib" - lib=$func_resolve_sysroot_result - ;; - *.$libext) - if test conv = "$pass"; then - deplibs="$deplib $deplibs" - continue - fi - case $linkmode in - lib) - # Linking convenience modules into shared libraries is allowed, - # but linking other static libraries is non-portable. - case " $dlpreconveniencelibs " in - *" $deplib "*) ;; - *) - valid_a_lib=false - case $deplibs_check_method in - match_pattern*) - set dummy $deplibs_check_method; shift - match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` - if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ - | $EGREP "$match_pattern_regex" > /dev/null; then - valid_a_lib=: - fi - ;; - pass_all) - valid_a_lib=: - ;; - esac - if $valid_a_lib; then - echo - $ECHO "*** Warning: Linking the shared library $output against the" - $ECHO "*** static library $deplib is not portable!" - deplibs="$deplib $deplibs" - else - echo - $ECHO "*** Warning: Trying to link with static lib archive $deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because the file extensions .$libext of this argument makes me believe" - echo "*** that it is just a static archive that I should not use here." - fi - ;; - esac - continue - ;; - prog) - if test link != "$pass"; then - deplibs="$deplib $deplibs" - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - continue - ;; - esac # linkmode - ;; # *.$libext - *.lo | *.$objext) - if test conv = "$pass"; then - deplibs="$deplib $deplibs" - elif test prog = "$linkmode"; then - if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then - # If there is no dlopen support or we're linking statically, - # we need to preload. - func_append newdlprefiles " $deplib" - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - func_append newdlfiles " $deplib" - fi - fi - continue - ;; - %DEPLIBS%) - alldeplibs=: - continue - ;; - esac # case $deplib - - $found || test -f "$lib" \ - || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'" - - # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$lib" \ - || func_fatal_error "'$lib' is not a valid libtool archive" - - func_dirname "$lib" "" "." - ladir=$func_dirname_result - - dlname= - dlopen= - dlpreopen= - libdir= - library_names= - old_library= - inherited_linker_flags= - # If the library was installed with an old release of libtool, - # it will not redefine variables installed, or shouldnotlink - installed=yes - shouldnotlink=no - avoidtemprpath= - - - # Read the .la file - func_source "$lib" - - # Convert "-framework foo" to "foo.ltframework" - if test -n "$inherited_linker_flags"; then - tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` - for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do - case " $new_inherited_linker_flags " in - *" $tmp_inherited_linker_flag "*) ;; - *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; - esac - done - fi - dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - if test lib,link = "$linkmode,$pass" || - test prog,scan = "$linkmode,$pass" || - { test prog != "$linkmode" && test lib != "$linkmode"; }; then - test -n "$dlopen" && func_append dlfiles " $dlopen" - test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" - fi - - if test conv = "$pass"; then - # Only check for convenience libraries - deplibs="$lib $deplibs" - if test -z "$libdir"; then - if test -z "$old_library"; then - func_fatal_error "cannot find name of link library for '$lib'" - fi - # It is a libtool convenience library, so add in its objects. - func_append convenience " $ladir/$objdir/$old_library" - func_append old_convenience " $ladir/$objdir/$old_library" - elif test prog != "$linkmode" && test lib != "$linkmode"; then - func_fatal_error "'$lib' is not a convenience library" - fi - tmp_libs= - for deplib in $dependency_libs; do - deplibs="$deplib $deplibs" - if $opt_preserve_dup_deps; then - case "$tmp_libs " in - *" $deplib "*) func_append specialdeplibs " $deplib" ;; - esac - fi - func_append tmp_libs " $deplib" - done - continue - fi # $pass = conv - - - # Get the name of the library we link against. - linklib= - if test -n "$old_library" && - { test yes = "$prefer_static_libs" || - test built,no = "$prefer_static_libs,$installed"; }; then - linklib=$old_library - else - for l in $old_library $library_names; do - linklib=$l - done - fi - if test -z "$linklib"; then - func_fatal_error "cannot find name of link library for '$lib'" - fi - - # This library was specified with -dlopen. - if test dlopen = "$pass"; then - test -z "$libdir" \ - && func_fatal_error "cannot -dlopen a convenience library: '$lib'" - if test -z "$dlname" || - test yes != "$dlopen_support" || - test no = "$build_libtool_libs" - then - # If there is no dlname, no dlopen support or we're linking - # statically, we need to preload. We also need to preload any - # dependent libraries so libltdl's deplib preloader doesn't - # bomb out in the load deplibs phase. - func_append dlprefiles " $lib $dependency_libs" - else - func_append newdlfiles " $lib" - fi - continue - fi # $pass = dlopen - - # We need an absolute path. - case $ladir in - [\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;; - *) - abs_ladir=`cd "$ladir" && pwd` - if test -z "$abs_ladir"; then - func_warning "cannot determine absolute directory name of '$ladir'" - func_warning "passing it literally to the linker, although it might fail" - abs_ladir=$ladir - fi - ;; - esac - func_basename "$lib" - laname=$func_basename_result - - # Find the relevant object directory and library name. - if test yes = "$installed"; then - if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then - func_warning "library '$lib' was moved." - dir=$ladir - absdir=$abs_ladir - libdir=$abs_ladir - else - dir=$lt_sysroot$libdir - absdir=$lt_sysroot$libdir - fi - test yes = "$hardcode_automatic" && avoidtemprpath=yes - else - if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then - dir=$ladir - absdir=$abs_ladir - # Remove this search path later - func_append notinst_path " $abs_ladir" - else - dir=$ladir/$objdir - absdir=$abs_ladir/$objdir - # Remove this search path later - func_append notinst_path " $abs_ladir" - fi - fi # $installed = yes - func_stripname 'lib' '.la' "$laname" - name=$func_stripname_result - - # This library was specified with -dlpreopen. - if test dlpreopen = "$pass"; then - if test -z "$libdir" && test prog = "$linkmode"; then - func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'" - fi - case $host in - # special handling for platforms with PE-DLLs. - *cygwin* | *mingw* | *cegcc* ) - # Linker will automatically link against shared library if both - # static and shared are present. Therefore, ensure we extract - # symbols from the import library if a shared library is present - # (otherwise, the dlopen module name will be incorrect). We do - # this by putting the import library name into $newdlprefiles. - # We recover the dlopen module name by 'saving' the la file - # name in a special purpose variable, and (later) extracting the - # dlname from the la file. - if test -n "$dlname"; then - func_tr_sh "$dir/$linklib" - eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" - func_append newdlprefiles " $dir/$linklib" - else - func_append newdlprefiles " $dir/$old_library" - # Keep a list of preopened convenience libraries to check - # that they are being used correctly in the link pass. - test -z "$libdir" && \ - func_append dlpreconveniencelibs " $dir/$old_library" - fi - ;; - * ) - # Prefer using a static library (so that no silly _DYNAMIC symbols - # are required to link). - if test -n "$old_library"; then - func_append newdlprefiles " $dir/$old_library" - # Keep a list of preopened convenience libraries to check - # that they are being used correctly in the link pass. - test -z "$libdir" && \ - func_append dlpreconveniencelibs " $dir/$old_library" - # Otherwise, use the dlname, so that lt_dlopen finds it. - elif test -n "$dlname"; then - func_append newdlprefiles " $dir/$dlname" - else - func_append newdlprefiles " $dir/$linklib" - fi - ;; - esac - fi # $pass = dlpreopen - - if test -z "$libdir"; then - # Link the convenience library - if test lib = "$linkmode"; then - deplibs="$dir/$old_library $deplibs" - elif test prog,link = "$linkmode,$pass"; then - compile_deplibs="$dir/$old_library $compile_deplibs" - finalize_deplibs="$dir/$old_library $finalize_deplibs" - else - deplibs="$lib $deplibs" # used for prog,scan pass - fi - continue - fi - - - if test prog = "$linkmode" && test link != "$pass"; then - func_append newlib_search_path " $ladir" - deplibs="$lib $deplibs" - - linkalldeplibs=false - if test no != "$link_all_deplibs" || test -z "$library_names" || - test no = "$build_libtool_libs"; then - linkalldeplibs=: - fi - - tmp_libs= - for deplib in $dependency_libs; do - case $deplib in - -L*) func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - func_append newlib_search_path " $func_resolve_sysroot_result" - ;; - esac - # Need to link against all dependency_libs? - if $linkalldeplibs; then - deplibs="$deplib $deplibs" - else - # Need to hardcode shared library paths - # or/and link against static libraries - newdependency_libs="$deplib $newdependency_libs" - fi - if $opt_preserve_dup_deps; then - case "$tmp_libs " in - *" $deplib "*) func_append specialdeplibs " $deplib" ;; - esac - fi - func_append tmp_libs " $deplib" - done # for deplib - continue - fi # $linkmode = prog... - - if test prog,link = "$linkmode,$pass"; then - if test -n "$library_names" && - { { test no = "$prefer_static_libs" || - test built,yes = "$prefer_static_libs,$installed"; } || - test -z "$old_library"; }; then - # We need to hardcode the library path - if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then - # Make sure the rpath contains only unique directories. - case $temp_rpath: in - *"$absdir:"*) ;; - *) func_append temp_rpath "$absdir:" ;; - esac - fi - - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) func_append compile_rpath " $absdir" ;; - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; - esac - ;; - esac - fi # $linkmode,$pass = prog,link... - - if $alldeplibs && - { test pass_all = "$deplibs_check_method" || - { test yes = "$build_libtool_libs" && - test -n "$library_names"; }; }; then - # We only need to search for static libraries - continue - fi - fi - - link_static=no # Whether the deplib will be linked statically - use_static_libs=$prefer_static_libs - if test built = "$use_static_libs" && test yes = "$installed"; then - use_static_libs=no - fi - if test -n "$library_names" && - { test no = "$use_static_libs" || test -z "$old_library"; }; then - case $host in - *cygwin* | *mingw* | *cegcc* | *os2*) - # No point in relinking DLLs because paths are not encoded - func_append notinst_deplibs " $lib" - need_relink=no - ;; - *) - if test no = "$installed"; then - func_append notinst_deplibs " $lib" - need_relink=yes - fi - ;; - esac - # This is a shared library - - # Warn about portability, can't link against -module's on some - # systems (darwin). Don't bleat about dlopened modules though! - dlopenmodule= - for dlpremoduletest in $dlprefiles; do - if test "X$dlpremoduletest" = "X$lib"; then - dlopenmodule=$dlpremoduletest - break - fi - done - if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then - echo - if test prog = "$linkmode"; then - $ECHO "*** Warning: Linking the executable $output against the loadable module" - else - $ECHO "*** Warning: Linking the shared library $output against the loadable module" - fi - $ECHO "*** $linklib is not portable!" - fi - if test lib = "$linkmode" && - test yes = "$hardcode_into_libs"; then - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) func_append compile_rpath " $absdir" ;; - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; - esac - ;; - esac - fi - - if test -n "$old_archive_from_expsyms_cmds"; then - # figure out the soname - set dummy $library_names - shift - realname=$1 - shift - libname=`eval "\\$ECHO \"$libname_spec\""` - # use dlname if we got it. it's perfectly good, no? - if test -n "$dlname"; then - soname=$dlname - elif test -n "$soname_spec"; then - # bleh windows - case $host in - *cygwin* | mingw* | *cegcc* | *os2*) - func_arith $current - $age - major=$func_arith_result - versuffix=-$major - ;; - esac - eval soname=\"$soname_spec\" - else - soname=$realname - fi - - # Make a new name for the extract_expsyms_cmds to use - soroot=$soname - func_basename "$soroot" - soname=$func_basename_result - func_stripname 'lib' '.dll' "$soname" - newlib=libimp-$func_stripname_result.a - - # If the library has no export list, then create one now - if test -f "$output_objdir/$soname-def"; then : - else - func_verbose "extracting exported symbol list from '$soname'" - func_execute_cmds "$extract_expsyms_cmds" 'exit $?' - fi - - # Create $newlib - if test -f "$output_objdir/$newlib"; then :; else - func_verbose "generating import library for '$soname'" - func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' - fi - # make sure the library variables are pointing to the new library - dir=$output_objdir - linklib=$newlib - fi # test -n "$old_archive_from_expsyms_cmds" - - if test prog = "$linkmode" || test relink != "$opt_mode"; then - add_shlibpath= - add_dir= - add= - lib_linked=yes - case $hardcode_action in - immediate | unsupported) - if test no = "$hardcode_direct"; then - add=$dir/$linklib - case $host in - *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;; - *-*-sysv4*uw2*) add_dir=-L$dir ;; - *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ - *-*-unixware7*) add_dir=-L$dir ;; - *-*-darwin* ) - # if the lib is a (non-dlopened) module then we cannot - # link against it, someone is ignoring the earlier warnings - if /usr/bin/file -L $add 2> /dev/null | - $GREP ": [^:]* bundle" >/dev/null; then - if test "X$dlopenmodule" != "X$lib"; then - $ECHO "*** Warning: lib $linklib is a module, not a shared library" - if test -z "$old_library"; then - echo - echo "*** And there doesn't seem to be a static archive available" - echo "*** The link will probably fail, sorry" - else - add=$dir/$old_library - fi - elif test -n "$old_library"; then - add=$dir/$old_library - fi - fi - esac - elif test no = "$hardcode_minus_L"; then - case $host in - *-*-sunos*) add_shlibpath=$dir ;; - esac - add_dir=-L$dir - add=-l$name - elif test no = "$hardcode_shlibpath_var"; then - add_shlibpath=$dir - add=-l$name - else - lib_linked=no - fi - ;; - relink) - if test yes = "$hardcode_direct" && - test no = "$hardcode_direct_absolute"; then - add=$dir/$linklib - elif test yes = "$hardcode_minus_L"; then - add_dir=-L$absdir - # Try looking first in the location we're being installed to. - if test -n "$inst_prefix_dir"; then - case $libdir in - [\\/]*) - func_append add_dir " -L$inst_prefix_dir$libdir" - ;; - esac - fi - add=-l$name - elif test yes = "$hardcode_shlibpath_var"; then - add_shlibpath=$dir - add=-l$name - else - lib_linked=no - fi - ;; - *) lib_linked=no ;; - esac - - if test yes != "$lib_linked"; then - func_fatal_configuration "unsupported hardcode properties" - fi - - if test -n "$add_shlibpath"; then - case :$compile_shlibpath: in - *":$add_shlibpath:"*) ;; - *) func_append compile_shlibpath "$add_shlibpath:" ;; - esac - fi - if test prog = "$linkmode"; then - test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" - test -n "$add" && compile_deplibs="$add $compile_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - if test yes != "$hardcode_direct" && - test yes != "$hardcode_minus_L" && - test yes = "$hardcode_shlibpath_var"; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) func_append finalize_shlibpath "$libdir:" ;; - esac - fi - fi - fi - - if test prog = "$linkmode" || test relink = "$opt_mode"; then - add_shlibpath= - add_dir= - add= - # Finalize command for both is simple: just hardcode it. - if test yes = "$hardcode_direct" && - test no = "$hardcode_direct_absolute"; then - add=$libdir/$linklib - elif test yes = "$hardcode_minus_L"; then - add_dir=-L$libdir - add=-l$name - elif test yes = "$hardcode_shlibpath_var"; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) func_append finalize_shlibpath "$libdir:" ;; - esac - add=-l$name - elif test yes = "$hardcode_automatic"; then - if test -n "$inst_prefix_dir" && - test -f "$inst_prefix_dir$libdir/$linklib"; then - add=$inst_prefix_dir$libdir/$linklib - else - add=$libdir/$linklib - fi - else - # We cannot seem to hardcode it, guess we'll fake it. - add_dir=-L$libdir - # Try looking first in the location we're being installed to. - if test -n "$inst_prefix_dir"; then - case $libdir in - [\\/]*) - func_append add_dir " -L$inst_prefix_dir$libdir" - ;; - esac - fi - add=-l$name - fi - - if test prog = "$linkmode"; then - test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" - test -n "$add" && finalize_deplibs="$add $finalize_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - fi - fi - elif test prog = "$linkmode"; then - # Here we assume that one of hardcode_direct or hardcode_minus_L - # is not unsupported. This is valid on all known static and - # shared platforms. - if test unsupported != "$hardcode_direct"; then - test -n "$old_library" && linklib=$old_library - compile_deplibs="$dir/$linklib $compile_deplibs" - finalize_deplibs="$dir/$linklib $finalize_deplibs" - else - compile_deplibs="-l$name -L$dir $compile_deplibs" - finalize_deplibs="-l$name -L$dir $finalize_deplibs" - fi - elif test yes = "$build_libtool_libs"; then - # Not a shared library - if test pass_all != "$deplibs_check_method"; then - # We're trying link a shared library against a static one - # but the system doesn't support it. - - # Just print a warning and add the library to dependency_libs so - # that the program can be linked against the static library. - echo - $ECHO "*** Warning: This system cannot link to static lib archive $lib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." - if test yes = "$module"; then - echo "*** But as you try to build a module library, libtool will still create " - echo "*** a static module, that should work as long as the dlopening application" - echo "*** is linked with the -dlopen flag to resolve symbols at runtime." - if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using 'nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** 'nm' from GNU binutils and a full rebuild may help." - fi - if test no = "$build_old_libs"; then - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - fi - else - deplibs="$dir/$old_library $deplibs" - link_static=yes - fi - fi # link shared/static library? - - if test lib = "$linkmode"; then - if test -n "$dependency_libs" && - { test yes != "$hardcode_into_libs" || - test yes = "$build_old_libs" || - test yes = "$link_static"; }; then - # Extract -R from dependency_libs - temp_deplibs= - for libdir in $dependency_libs; do - case $libdir in - -R*) func_stripname '-R' '' "$libdir" - temp_xrpath=$func_stripname_result - case " $xrpath " in - *" $temp_xrpath "*) ;; - *) func_append xrpath " $temp_xrpath";; - esac;; - *) func_append temp_deplibs " $libdir";; - esac - done - dependency_libs=$temp_deplibs - fi - - func_append newlib_search_path " $absdir" - # Link against this library - test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs" - # ... and its dependency_libs - tmp_libs= - for deplib in $dependency_libs; do - newdependency_libs="$deplib $newdependency_libs" - case $deplib in - -L*) func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result";; - *) func_resolve_sysroot "$deplib" ;; - esac - if $opt_preserve_dup_deps; then - case "$tmp_libs " in - *" $func_resolve_sysroot_result "*) - func_append specialdeplibs " $func_resolve_sysroot_result" ;; - esac - fi - func_append tmp_libs " $func_resolve_sysroot_result" - done - - if test no != "$link_all_deplibs"; then - # Add the search paths of all dependency libraries - for deplib in $dependency_libs; do - path= - case $deplib in - -L*) path=$deplib ;; - *.la) - func_resolve_sysroot "$deplib" - deplib=$func_resolve_sysroot_result - func_dirname "$deplib" "" "." - dir=$func_dirname_result - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - func_warning "cannot determine absolute directory name of '$dir'" - absdir=$dir - fi - ;; - esac - if $GREP "^installed=no" $deplib > /dev/null; then - case $host in - *-*-darwin*) - depdepl= - eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` - if test -n "$deplibrary_names"; then - for tmp in $deplibrary_names; do - depdepl=$tmp - done - if test -f "$absdir/$objdir/$depdepl"; then - depdepl=$absdir/$objdir/$depdepl - darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` - if test -z "$darwin_install_name"; then - darwin_install_name=`$OTOOL64 -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` - fi - func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl" - func_append linker_flags " -dylib_file $darwin_install_name:$depdepl" - path= - fi - fi - ;; - *) - path=-L$absdir/$objdir - ;; - esac - else - eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - test -z "$libdir" && \ - func_fatal_error "'$deplib' is not a valid libtool archive" - test "$absdir" != "$libdir" && \ - func_warning "'$deplib' seems to be moved" - - path=-L$absdir - fi - ;; - esac - case " $deplibs " in - *" $path "*) ;; - *) deplibs="$path $deplibs" ;; - esac - done - fi # link_all_deplibs != no - fi # linkmode = lib - done # for deplib in $libs - if test link = "$pass"; then - if test prog = "$linkmode"; then - compile_deplibs="$new_inherited_linker_flags $compile_deplibs" - finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" - else - compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - fi - fi - dependency_libs=$newdependency_libs - if test dlpreopen = "$pass"; then - # Link the dlpreopened libraries before other libraries - for deplib in $save_deplibs; do - deplibs="$deplib $deplibs" - done - fi - if test dlopen != "$pass"; then - test conv = "$pass" || { - # Make sure lib_search_path contains only unique directories. - lib_search_path= - for dir in $newlib_search_path; do - case "$lib_search_path " in - *" $dir "*) ;; - *) func_append lib_search_path " $dir" ;; - esac - done - newlib_search_path= - } - - if test prog,link = "$linkmode,$pass"; then - vars="compile_deplibs finalize_deplibs" - else - vars=deplibs - fi - for var in $vars dependency_libs; do - # Add libraries to $var in reverse order - eval tmp_libs=\"\$$var\" - new_libs= - for deplib in $tmp_libs; do - # FIXME: Pedantically, this is the right thing to do, so - # that some nasty dependency loop isn't accidentally - # broken: - #new_libs="$deplib $new_libs" - # Pragmatically, this seems to cause very few problems in - # practice: - case $deplib in - -L*) new_libs="$deplib $new_libs" ;; - -R*) ;; - *) - # And here is the reason: when a library appears more - # than once as an explicit dependence of a library, or - # is implicitly linked in more than once by the - # compiler, it is considered special, and multiple - # occurrences thereof are not removed. Compare this - # with having the same library being listed as a - # dependency of multiple other libraries: in this case, - # we know (pedantically, we assume) the library does not - # need to be listed more than once, so we keep only the - # last copy. This is not always right, but it is rare - # enough that we require users that really mean to play - # such unportable linking tricks to link the library - # using -Wl,-lname, so that libtool does not consider it - # for duplicate removal. - case " $specialdeplibs " in - *" $deplib "*) new_libs="$deplib $new_libs" ;; - *) - case " $new_libs " in - *" $deplib "*) ;; - *) new_libs="$deplib $new_libs" ;; - esac - ;; - esac - ;; - esac - done - tmp_libs= - for deplib in $new_libs; do - case $deplib in - -L*) - case " $tmp_libs " in - *" $deplib "*) ;; - *) func_append tmp_libs " $deplib" ;; - esac - ;; - *) func_append tmp_libs " $deplib" ;; - esac - done - eval $var=\"$tmp_libs\" - done # for var - fi - - # Add Sun CC postdeps if required: - test CXX = "$tagname" && { - case $host_os in - linux*) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C++ 5.9 - func_suncc_cstd_abi - - if test no != "$suncc_use_cstd_abi"; then - func_append postdeps ' -library=Cstd -library=Crun' - fi - ;; - esac - ;; - - solaris*) - func_cc_basename "$CC" - case $func_cc_basename_result in - CC* | sunCC*) - func_suncc_cstd_abi - - if test no != "$suncc_use_cstd_abi"; then - func_append postdeps ' -library=Cstd -library=Crun' - fi - ;; - esac - ;; - esac - } - - # Last step: remove runtime libs from dependency_libs - # (they stay in deplibs) - tmp_libs= - for i in $dependency_libs; do - case " $predeps $postdeps $compiler_lib_search_path " in - *" $i "*) - i= - ;; - esac - if test -n "$i"; then - func_append tmp_libs " $i" - fi - done - dependency_libs=$tmp_libs - done # for pass - if test prog = "$linkmode"; then - dlfiles=$newdlfiles - fi - if test prog = "$linkmode" || test lib = "$linkmode"; then - dlprefiles=$newdlprefiles - fi - - case $linkmode in - oldlib) - if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then - func_warning "'-dlopen' is ignored for archives" - fi - - case " $deplibs" in - *\ -l* | *\ -L*) - func_warning "'-l' and '-L' are ignored for archives" ;; - esac - - test -n "$rpath" && \ - func_warning "'-rpath' is ignored for archives" - - test -n "$xrpath" && \ - func_warning "'-R' is ignored for archives" - - test -n "$vinfo" && \ - func_warning "'-version-info/-version-number' is ignored for archives" - - test -n "$release" && \ - func_warning "'-release' is ignored for archives" - - test -n "$export_symbols$export_symbols_regex" && \ - func_warning "'-export-symbols' is ignored for archives" - - # Now set the variables for building old libraries. - build_libtool_libs=no - oldlibs=$output - func_append objs "$old_deplibs" - ;; - - lib) - # Make sure we only generate libraries of the form 'libNAME.la'. - case $outputname in - lib*) - func_stripname 'lib' '.la' "$outputname" - name=$func_stripname_result - eval shared_ext=\"$shrext_cmds\" - eval libname=\"$libname_spec\" - ;; - *) - test no = "$module" \ - && func_fatal_help "libtool library '$output' must begin with 'lib'" - - if test no != "$need_lib_prefix"; then - # Add the "lib" prefix for modules if required - func_stripname '' '.la' "$outputname" - name=$func_stripname_result - eval shared_ext=\"$shrext_cmds\" - eval libname=\"$libname_spec\" - else - func_stripname '' '.la' "$outputname" - libname=$func_stripname_result - fi - ;; - esac - - if test -n "$objs"; then - if test pass_all != "$deplibs_check_method"; then - func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs" - else - echo - $ECHO "*** Warning: Linking the shared library $output against the non-libtool" - $ECHO "*** objects $objs is not portable!" - func_append libobjs " $objs" - fi - fi - - test no = "$dlself" \ - || func_warning "'-dlopen self' is ignored for libtool libraries" - - set dummy $rpath - shift - test 1 -lt "$#" \ - && func_warning "ignoring multiple '-rpath's for a libtool library" - - install_libdir=$1 - - oldlibs= - if test -z "$rpath"; then - if test yes = "$build_libtool_libs"; then - # Building a libtool convenience library. - # Some compilers have problems with a '.al' extension so - # convenience libraries should have the same extension an - # archive normally would. - oldlibs="$output_objdir/$libname.$libext $oldlibs" - build_libtool_libs=convenience - build_old_libs=yes - fi - - test -n "$vinfo" && \ - func_warning "'-version-info/-version-number' is ignored for convenience libraries" - - test -n "$release" && \ - func_warning "'-release' is ignored for convenience libraries" - else - - # Parse the version information argument. - save_ifs=$IFS; IFS=: - set dummy $vinfo 0 0 0 - shift - IFS=$save_ifs - - test -n "$7" && \ - func_fatal_help "too many parameters to '-version-info'" - - # convert absolute version numbers to libtool ages - # this retains compatibility with .la files and attempts - # to make the code below a bit more comprehensible - - case $vinfo_number in - yes) - number_major=$1 - number_minor=$2 - number_revision=$3 - # - # There are really only two kinds -- those that - # use the current revision as the major version - # and those that subtract age and use age as - # a minor version. But, then there is irix - # that has an extra 1 added just for fun - # - case $version_type in - # correct linux to gnu/linux during the next big refactor - darwin|freebsd-elf|linux|osf|windows|none) - func_arith $number_major + $number_minor - current=$func_arith_result - age=$number_minor - revision=$number_revision - ;; - freebsd-aout|qnx|sunos) - current=$number_major - revision=$number_minor - age=0 - ;; - irix|nonstopux) - func_arith $number_major + $number_minor - current=$func_arith_result - age=$number_minor - revision=$number_minor - lt_irix_increment=no - ;; - esac - ;; - no) - current=$1 - revision=$2 - age=$3 - ;; - esac - - # Check that each of the things are valid numbers. - case $current in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - func_error "CURRENT '$current' must be a nonnegative integer" - func_fatal_error "'$vinfo' is not valid version information" - ;; - esac - - case $revision in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - func_error "REVISION '$revision' must be a nonnegative integer" - func_fatal_error "'$vinfo' is not valid version information" - ;; - esac - - case $age in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - func_error "AGE '$age' must be a nonnegative integer" - func_fatal_error "'$vinfo' is not valid version information" - ;; - esac - - if test "$age" -gt "$current"; then - func_error "AGE '$age' is greater than the current interface number '$current'" - func_fatal_error "'$vinfo' is not valid version information" - fi - - # Calculate the version variables. - major= - versuffix= - verstring= - case $version_type in - none) ;; - - darwin) - # Like Linux, but with the current version available in - # verstring for coding it into the library header - func_arith $current - $age - major=.$func_arith_result - versuffix=$major.$age.$revision - # Darwin ld doesn't like 0 for these options... - func_arith $current + 1 - minor_current=$func_arith_result - xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision" - verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" - # On Darwin other compilers - case $CC in - nagfor*) - verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision" - ;; - *) - verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" - ;; - esac - ;; - - freebsd-aout) - major=.$current - versuffix=.$current.$revision - ;; - - freebsd-elf) - func_arith $current - $age - major=.$func_arith_result - versuffix=$major.$age.$revision - ;; - - irix | nonstopux) - if test no = "$lt_irix_increment"; then - func_arith $current - $age - else - func_arith $current - $age + 1 - fi - major=$func_arith_result - - case $version_type in - nonstopux) verstring_prefix=nonstopux ;; - *) verstring_prefix=sgi ;; - esac - verstring=$verstring_prefix$major.$revision - - # Add in all the interfaces that we are compatible with. - loop=$revision - while test 0 -ne "$loop"; do - func_arith $revision - $loop - iface=$func_arith_result - func_arith $loop - 1 - loop=$func_arith_result - verstring=$verstring_prefix$major.$iface:$verstring - done - - # Before this point, $major must not contain '.'. - major=.$major - versuffix=$major.$revision - ;; - - linux) # correct to gnu/linux during the next big refactor - func_arith $current - $age - major=.$func_arith_result - versuffix=$major.$age.$revision - ;; - - osf) - func_arith $current - $age - major=.$func_arith_result - versuffix=.$current.$age.$revision - verstring=$current.$age.$revision - - # Add in all the interfaces that we are compatible with. - loop=$age - while test 0 -ne "$loop"; do - func_arith $current - $loop - iface=$func_arith_result - func_arith $loop - 1 - loop=$func_arith_result - verstring=$verstring:$iface.0 - done - - # Make executables depend on our current version. - func_append verstring ":$current.0" - ;; - - qnx) - major=.$current - versuffix=.$current - ;; - - sco) - major=.$current - versuffix=.$current - ;; - - sunos) - major=.$current - versuffix=.$current.$revision - ;; - - windows) - # Use '-' rather than '.', since we only want one - # extension on DOS 8.3 file systems. - func_arith $current - $age - major=$func_arith_result - versuffix=-$major - ;; - - *) - func_fatal_configuration "unknown library version type '$version_type'" - ;; - esac - - # Clear the version info if we defaulted, and they specified a release. - if test -z "$vinfo" && test -n "$release"; then - major= - case $version_type in - darwin) - # we can't check for "0.0" in archive_cmds due to quoting - # problems, so we reset it completely - verstring= - ;; - *) - verstring=0.0 - ;; - esac - if test no = "$need_version"; then - versuffix= - else - versuffix=.0.0 - fi - fi - - # Remove version info from name if versioning should be avoided - if test yes,no = "$avoid_version,$need_version"; then - major= - versuffix= - verstring= - fi - - # Check to see if the archive will have undefined symbols. - if test yes = "$allow_undefined"; then - if test unsupported = "$allow_undefined_flag"; then - if test yes = "$build_old_libs"; then - func_warning "undefined symbols not allowed in $host shared libraries; building static only" - build_libtool_libs=no - else - func_fatal_error "can't build $host shared library unless -no-undefined is specified" - fi - fi - else - # Don't allow undefined symbols. - allow_undefined_flag=$no_undefined_flag - fi - - fi - - func_generate_dlsyms "$libname" "$libname" : - func_append libobjs " $symfileobj" - test " " = "$libobjs" && libobjs= - - if test relink != "$opt_mode"; then - # Remove our outputs, but don't remove object files since they - # may have been created when compiling PIC objects. - removelist= - tempremovelist=`$ECHO "$output_objdir/*"` - for p in $tempremovelist; do - case $p in - *.$objext | *.gcno) - ;; - $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*) - if test -n "$precious_files_regex"; then - if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 - then - continue - fi - fi - func_append removelist " $p" - ;; - *) ;; - esac - done - test -n "$removelist" && \ - func_show_eval "${RM}r \$removelist" - fi - - # Now set the variables for building old libraries. - if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then - func_append oldlibs " $output_objdir/$libname.$libext" - - # Transform .lo files to .o files. - oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP` - fi - - # Eliminate all temporary directories. - #for path in $notinst_path; do - # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` - # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` - # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` - #done - - if test -n "$xrpath"; then - # If the user specified any rpath flags, then add them. - temp_xrpath= - for libdir in $xrpath; do - func_replace_sysroot "$libdir" - func_append temp_xrpath " -R$func_replace_sysroot_result" - case "$finalize_rpath " in - *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; - esac - done - if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then - dependency_libs="$temp_xrpath $dependency_libs" - fi - fi - - # Make sure dlfiles contains only unique files that won't be dlpreopened - old_dlfiles=$dlfiles - dlfiles= - for lib in $old_dlfiles; do - case " $dlprefiles $dlfiles " in - *" $lib "*) ;; - *) func_append dlfiles " $lib" ;; - esac - done - - # Make sure dlprefiles contains only unique files - old_dlprefiles=$dlprefiles - dlprefiles= - for lib in $old_dlprefiles; do - case "$dlprefiles " in - *" $lib "*) ;; - *) func_append dlprefiles " $lib" ;; - esac - done - - if test yes = "$build_libtool_libs"; then - if test -n "$rpath"; then - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) - # these systems don't actually have a c library (as such)! - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C library is in the System framework - func_append deplibs " System.ltframework" - ;; - *-*-netbsd*) - # Don't link with libc until the a.out ld.so is fixed. - ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) - # Do not include libc due to us having libc/libc_r. - ;; - *-*-sco3.2v5* | *-*-sco5v6*) - # Causes problems with __ctype - ;; - *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) - # Compiler inserts libc in the correct place for threads to work - ;; - *) - # Add libc to deplibs on all other systems if necessary. - if test yes = "$build_libtool_need_lc"; then - func_append deplibs " -lc" - fi - ;; - esac - fi - - # Transform deplibs into only deplibs that can be linked in shared. - name_save=$name - libname_save=$libname - release_save=$release - versuffix_save=$versuffix - major_save=$major - # I'm not sure if I'm treating the release correctly. I think - # release should show up in the -l (ie -lgmp5) so we don't want to - # add it in twice. Is that correct? - release= - versuffix= - major= - newdeplibs= - droppeddeps=no - case $deplibs_check_method in - pass_all) - # Don't check for shared/static. Everything works. - # This might be a little naive. We might want to check - # whether the library exists or not. But this is on - # osf3 & osf4 and I'm not really sure... Just - # implementing what was already the behavior. - newdeplibs=$deplibs - ;; - test_compile) - # This code stresses the "libraries are programs" paradigm to its - # limits. Maybe even breaks it. We compile a program, linking it - # against the deplibs as a proxy for the library. Then we can check - # whether they linked in statically or dynamically with ldd. - $opt_dry_run || $RM conftest.c - cat > conftest.c </dev/null` - $nocaseglob - else - potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` - fi - for potent_lib in $potential_libs; do - # Follow soft links. - if ls -lLd "$potent_lib" 2>/dev/null | - $GREP " -> " >/dev/null; then - continue - fi - # The statement above tries to avoid entering an - # endless loop below, in case of cyclic links. - # We might still enter an endless loop, since a link - # loop can be closed while we follow links, - # but so what? - potlib=$potent_lib - while test -h "$potlib" 2>/dev/null; do - potliblink=`ls -ld $potlib | $SED 's/.* -> //'` - case $potliblink in - [\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;; - *) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";; - esac - done - if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | - $SED -e 10q | - $EGREP "$file_magic_regex" > /dev/null; then - func_append newdeplibs " $a_deplib" - a_deplib= - break 2 - fi - done - done - fi - if test -n "$a_deplib"; then - droppeddeps=yes - echo - $ECHO "*** Warning: linker path does not have real file for library $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib"; then - $ECHO "*** with $libname but no candidates were found. (...for file magic test)" - else - $ECHO "*** with $libname and none of the candidates passed a file format test" - $ECHO "*** using a file magic. Last file checked: $potlib" - fi - fi - ;; - *) - # Add a -L argument. - func_append newdeplibs " $a_deplib" - ;; - esac - done # Gone through all deplibs. - ;; - match_pattern*) - set dummy $deplibs_check_method; shift - match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` - for a_deplib in $deplibs; do - case $a_deplib in - -l*) - func_stripname -l '' "$a_deplib" - name=$func_stripname_result - if test yes = "$allow_libtool_libs_with_static_runtimes"; then - case " $predeps $postdeps " in - *" $a_deplib "*) - func_append newdeplibs " $a_deplib" - a_deplib= - ;; - esac - fi - if test -n "$a_deplib"; then - libname=`eval "\\$ECHO \"$libname_spec\""` - for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` - for potent_lib in $potential_libs; do - potlib=$potent_lib # see symlink-check above in file_magic test - if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ - $EGREP "$match_pattern_regex" > /dev/null; then - func_append newdeplibs " $a_deplib" - a_deplib= - break 2 - fi - done - done - fi - if test -n "$a_deplib"; then - droppeddeps=yes - echo - $ECHO "*** Warning: linker path does not have real file for library $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib"; then - $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" - else - $ECHO "*** with $libname and none of the candidates passed a file format test" - $ECHO "*** using a regex pattern. Last file checked: $potlib" - fi - fi - ;; - *) - # Add a -L argument. - func_append newdeplibs " $a_deplib" - ;; - esac - done # Gone through all deplibs. - ;; - none | unknown | *) - newdeplibs= - tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` - if test yes = "$allow_libtool_libs_with_static_runtimes"; then - for i in $predeps $postdeps; do - # can't use Xsed below, because $i might contain '/' - tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"` - done - fi - case $tmp_deplibs in - *[!\ \ ]*) - echo - if test none = "$deplibs_check_method"; then - echo "*** Warning: inter-library dependencies are not supported in this platform." - else - echo "*** Warning: inter-library dependencies are not known to be supported." - fi - echo "*** All declared inter-library dependencies are being dropped." - droppeddeps=yes - ;; - esac - ;; - esac - versuffix=$versuffix_save - major=$major_save - release=$release_save - libname=$libname_save - name=$name_save - - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library with the System framework - newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` - ;; - esac - - if test yes = "$droppeddeps"; then - if test yes = "$module"; then - echo - echo "*** Warning: libtool could not satisfy all declared inter-library" - $ECHO "*** dependencies of module $libname. Therefore, libtool will create" - echo "*** a static module, that should work as long as the dlopening" - echo "*** application is linked with the -dlopen flag." - if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using 'nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** 'nm' from GNU binutils and a full rebuild may help." - fi - if test no = "$build_old_libs"; then - oldlibs=$output_objdir/$libname.$libext - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - else - echo "*** The inter-library dependencies that have been dropped here will be" - echo "*** automatically added whenever a program is linked with this library" - echo "*** or is declared to -dlopen it." - - if test no = "$allow_undefined"; then - echo - echo "*** Since this library must not contain undefined symbols," - echo "*** because either the platform does not support them or" - echo "*** it was explicitly requested with -no-undefined," - echo "*** libtool will only create a static version of it." - if test no = "$build_old_libs"; then - oldlibs=$output_objdir/$libname.$libext - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - fi - fi - fi - # Done checking deplibs! - deplibs=$newdeplibs - fi - # Time to change all our "foo.ltframework" stuff back to "-framework foo" - case $host in - *-*-darwin*) - newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - ;; - esac - - # move library search paths that coincide with paths to not yet - # installed libraries to the beginning of the library search list - new_libs= - for path in $notinst_path; do - case " $new_libs " in - *" -L$path/$objdir "*) ;; - *) - case " $deplibs " in - *" -L$path/$objdir "*) - func_append new_libs " -L$path/$objdir" ;; - esac - ;; - esac - done - for deplib in $deplibs; do - case $deplib in - -L*) - case " $new_libs " in - *" $deplib "*) ;; - *) func_append new_libs " $deplib" ;; - esac - ;; - *) func_append new_libs " $deplib" ;; - esac - done - deplibs=$new_libs - - # All the library-specific variables (install_libdir is set above). - library_names= - old_library= - dlname= - - # Test again, we may have decided not to build it any more - if test yes = "$build_libtool_libs"; then - # Remove $wl instances when linking with ld. - # FIXME: should test the right _cmds variable. - case $archive_cmds in - *\$LD\ *) wl= ;; - esac - if test yes = "$hardcode_into_libs"; then - # Hardcode the library paths - hardcode_libdirs= - dep_rpath= - rpath=$finalize_rpath - test relink = "$opt_mode" || rpath=$compile_rpath$rpath - for libdir in $rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - func_replace_sysroot "$libdir" - libdir=$func_replace_sysroot_result - if test -z "$hardcode_libdirs"; then - hardcode_libdirs=$libdir - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - func_append dep_rpath " $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) func_append perm_rpath " $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir=$hardcode_libdirs - eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" - fi - if test -n "$runpath_var" && test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - func_append rpath "$dir:" - done - eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" - fi - test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" - fi - - shlibpath=$finalize_shlibpath - test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath - if test -n "$shlibpath"; then - eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" - fi - - # Get the real and link names of the library. - eval shared_ext=\"$shrext_cmds\" - eval library_names=\"$library_names_spec\" - set dummy $library_names - shift - realname=$1 - shift - - if test -n "$soname_spec"; then - eval soname=\"$soname_spec\" - else - soname=$realname - fi - if test -z "$dlname"; then - dlname=$soname - fi - - lib=$output_objdir/$realname - linknames= - for link - do - func_append linknames " $link" - done - - # Use standard objects if they are pic - test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` - test "X$libobjs" = "X " && libobjs= - - delfiles= - if test -n "$export_symbols" && test -n "$include_expsyms"; then - $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" - export_symbols=$output_objdir/$libname.uexp - func_append delfiles " $export_symbols" - fi - - orig_export_symbols= - case $host_os in - cygwin* | mingw* | cegcc*) - if test -n "$export_symbols" && test -z "$export_symbols_regex"; then - # exporting using user supplied symfile - func_dll_def_p "$export_symbols" || { - # and it's NOT already a .def file. Must figure out - # which of the given symbols are data symbols and tag - # them as such. So, trigger use of export_symbols_cmds. - # export_symbols gets reassigned inside the "prepare - # the list of exported symbols" if statement, so the - # include_expsyms logic still works. - orig_export_symbols=$export_symbols - export_symbols= - always_export_symbols=yes - } - fi - ;; - esac - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then - func_verbose "generating symbol list for '$libname.la'" - export_symbols=$output_objdir/$libname.exp - $opt_dry_run || $RM $export_symbols - cmds=$export_symbols_cmds - save_ifs=$IFS; IFS='~' - for cmd1 in $cmds; do - IFS=$save_ifs - # Take the normal branch if the nm_file_list_spec branch - # doesn't work or if tool conversion is not needed. - case $nm_file_list_spec~$to_tool_file_cmd in - *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) - try_normal_branch=yes - eval cmd=\"$cmd1\" - func_len " $cmd" - len=$func_len_result - ;; - *) - try_normal_branch=no - ;; - esac - if test yes = "$try_normal_branch" \ - && { test "$len" -lt "$max_cmd_len" \ - || test "$max_cmd_len" -le -1; } - then - func_show_eval "$cmd" 'exit $?' - skipped_export=false - elif test -n "$nm_file_list_spec"; then - func_basename "$output" - output_la=$func_basename_result - save_libobjs=$libobjs - save_output=$output - output=$output_objdir/$output_la.nm - func_to_tool_file "$output" - libobjs=$nm_file_list_spec$func_to_tool_file_result - func_append delfiles " $output" - func_verbose "creating $NM input file list: $output" - for obj in $save_libobjs; do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" - done > "$output" - eval cmd=\"$cmd1\" - func_show_eval "$cmd" 'exit $?' - output=$save_output - libobjs=$save_libobjs - skipped_export=false - else - # The command line is too long to execute in one step. - func_verbose "using reloadable object file for export list..." - skipped_export=: - # Break out early, otherwise skipped_export may be - # set to false by a later but shorter cmd. - break - fi - done - IFS=$save_ifs - if test -n "$export_symbols_regex" && test : != "$skipped_export"; then - func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - func_show_eval '$MV "${export_symbols}T" "$export_symbols"' - fi - fi - fi - - if test -n "$export_symbols" && test -n "$include_expsyms"; then - tmp_export_symbols=$export_symbols - test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols - $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' - fi - - if test : != "$skipped_export" && test -n "$orig_export_symbols"; then - # The given exports_symbols file has to be filtered, so filter it. - func_verbose "filter symbol list for '$libname.la' to tag DATA exports" - # FIXME: $output_objdir/$libname.filter potentially contains lots of - # 's' commands, which not all seds can handle. GNU sed should be fine - # though. Also, the filter scales superlinearly with the number of - # global variables. join(1) would be nice here, but unfortunately - # isn't a blessed tool. - $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter - func_append delfiles " $export_symbols $output_objdir/$libname.filter" - export_symbols=$output_objdir/$libname.def - $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols - fi - - tmp_deplibs= - for test_deplib in $deplibs; do - case " $convenience " in - *" $test_deplib "*) ;; - *) - func_append tmp_deplibs " $test_deplib" - ;; - esac - done - deplibs=$tmp_deplibs - - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec" && - test yes = "$compiler_needs_object" && - test -z "$libobjs"; then - # extract the archives, so we have objects to list. - # TODO: could optimize this to just extract one archive. - whole_archive_flag_spec= - fi - if test -n "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - test "X$libobjs" = "X " && libobjs= - else - gentop=$output_objdir/${outputname}x - func_append generated " $gentop" - - func_extract_archives $gentop $convenience - func_append libobjs " $func_extract_archives_result" - test "X$libobjs" = "X " && libobjs= - fi - fi - - if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then - eval flag=\"$thread_safe_flag_spec\" - func_append linker_flags " $flag" - fi - - # Make a backup of the uninstalled library when relinking - if test relink = "$opt_mode"; then - $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? - fi - - # Do each of the archive commands. - if test yes = "$module" && test -n "$module_cmds"; then - if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then - eval test_cmds=\"$module_expsym_cmds\" - cmds=$module_expsym_cmds - else - eval test_cmds=\"$module_cmds\" - cmds=$module_cmds - fi - else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval test_cmds=\"$archive_expsym_cmds\" - cmds=$archive_expsym_cmds - else - eval test_cmds=\"$archive_cmds\" - cmds=$archive_cmds - fi - fi - - if test : != "$skipped_export" && - func_len " $test_cmds" && - len=$func_len_result && - test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then - : - else - # The command line is too long to link in one step, link piecewise - # or, if using GNU ld and skipped_export is not :, use a linker - # script. - - # Save the value of $output and $libobjs because we want to - # use them later. If we have whole_archive_flag_spec, we - # want to use save_libobjs as it was before - # whole_archive_flag_spec was expanded, because we can't - # assume the linker understands whole_archive_flag_spec. - # This may have to be revisited, in case too many - # convenience libraries get linked in and end up exceeding - # the spec. - if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - fi - save_output=$output - func_basename "$output" - output_la=$func_basename_result - - # Clear the reloadable object creation command queue and - # initialize k to one. - test_cmds= - concat_cmds= - objlist= - last_robj= - k=1 - - if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then - output=$output_objdir/$output_la.lnkscript - func_verbose "creating GNU ld script: $output" - echo 'INPUT (' > $output - for obj in $save_libobjs - do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" >> $output - done - echo ')' >> $output - func_append delfiles " $output" - func_to_tool_file "$output" - output=$func_to_tool_file_result - elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then - output=$output_objdir/$output_la.lnk - func_verbose "creating linker input file list: $output" - : > $output - set x $save_libobjs - shift - firstobj= - if test yes = "$compiler_needs_object"; then - firstobj="$1 " - shift - fi - for obj - do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" >> $output - done - func_append delfiles " $output" - func_to_tool_file "$output" - output=$firstobj\"$file_list_spec$func_to_tool_file_result\" - else - if test -n "$save_libobjs"; then - func_verbose "creating reloadable object files..." - output=$output_objdir/$output_la-$k.$objext - eval test_cmds=\"$reload_cmds\" - func_len " $test_cmds" - len0=$func_len_result - len=$len0 - - # Loop over the list of objects to be linked. - for obj in $save_libobjs - do - func_len " $obj" - func_arith $len + $func_len_result - len=$func_arith_result - if test -z "$objlist" || - test "$len" -lt "$max_cmd_len"; then - func_append objlist " $obj" - else - # The command $test_cmds is almost too long, add a - # command to the queue. - if test 1 -eq "$k"; then - # The first file doesn't have a previous command to add. - reload_objs=$objlist - eval concat_cmds=\"$reload_cmds\" - else - # All subsequent reloadable object files will link in - # the last one created. - reload_objs="$objlist $last_robj" - eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" - fi - last_robj=$output_objdir/$output_la-$k.$objext - func_arith $k + 1 - k=$func_arith_result - output=$output_objdir/$output_la-$k.$objext - objlist=" $obj" - func_len " $last_robj" - func_arith $len0 + $func_len_result - len=$func_arith_result - fi - done - # Handle the remaining objects by creating one last - # reloadable object file. All subsequent reloadable object - # files will link in the last one created. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - reload_objs="$objlist $last_robj" - eval concat_cmds=\"\$concat_cmds$reload_cmds\" - if test -n "$last_robj"; then - eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" - fi - func_append delfiles " $output" - - else - output= - fi - - ${skipped_export-false} && { - func_verbose "generating symbol list for '$libname.la'" - export_symbols=$output_objdir/$libname.exp - $opt_dry_run || $RM $export_symbols - libobjs=$output - # Append the command to create the export file. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" - if test -n "$last_robj"; then - eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" - fi - } - - test -n "$save_libobjs" && - func_verbose "creating a temporary reloadable object file: $output" - - # Loop through the commands generated above and execute them. - save_ifs=$IFS; IFS='~' - for cmd in $concat_cmds; do - IFS=$save_ifs - $opt_quiet || { - func_quote_for_expand "$cmd" - eval "func_echo $func_quote_for_expand_result" - } - $opt_dry_run || eval "$cmd" || { - lt_exit=$? - - # Restore the uninstalled library and exit - if test relink = "$opt_mode"; then - ( cd "$output_objdir" && \ - $RM "${realname}T" && \ - $MV "${realname}U" "$realname" ) - fi - - exit $lt_exit - } - done - IFS=$save_ifs - - if test -n "$export_symbols_regex" && ${skipped_export-false}; then - func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - func_show_eval '$MV "${export_symbols}T" "$export_symbols"' - fi - fi - - ${skipped_export-false} && { - if test -n "$export_symbols" && test -n "$include_expsyms"; then - tmp_export_symbols=$export_symbols - test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols - $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' - fi - - if test -n "$orig_export_symbols"; then - # The given exports_symbols file has to be filtered, so filter it. - func_verbose "filter symbol list for '$libname.la' to tag DATA exports" - # FIXME: $output_objdir/$libname.filter potentially contains lots of - # 's' commands, which not all seds can handle. GNU sed should be fine - # though. Also, the filter scales superlinearly with the number of - # global variables. join(1) would be nice here, but unfortunately - # isn't a blessed tool. - $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter - func_append delfiles " $export_symbols $output_objdir/$libname.filter" - export_symbols=$output_objdir/$libname.def - $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols - fi - } - - libobjs=$output - # Restore the value of output. - output=$save_output - - if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - test "X$libobjs" = "X " && libobjs= - fi - # Expand the library linking commands again to reset the - # value of $libobjs for piecewise linking. - - # Do each of the archive commands. - if test yes = "$module" && test -n "$module_cmds"; then - if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then - cmds=$module_expsym_cmds - else - cmds=$module_cmds - fi - else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - cmds=$archive_expsym_cmds - else - cmds=$archive_cmds - fi - fi - fi - - if test -n "$delfiles"; then - # Append the command to remove temporary files to $cmds. - eval cmds=\"\$cmds~\$RM $delfiles\" - fi - - # Add any objects from preloaded convenience libraries - if test -n "$dlprefiles"; then - gentop=$output_objdir/${outputname}x - func_append generated " $gentop" - - func_extract_archives $gentop $dlprefiles - func_append libobjs " $func_extract_archives_result" - test "X$libobjs" = "X " && libobjs= - fi - - save_ifs=$IFS; IFS='~' - for cmd in $cmds; do - IFS=$sp$nl - eval cmd=\"$cmd\" - IFS=$save_ifs - $opt_quiet || { - func_quote_for_expand "$cmd" - eval "func_echo $func_quote_for_expand_result" - } - $opt_dry_run || eval "$cmd" || { - lt_exit=$? - - # Restore the uninstalled library and exit - if test relink = "$opt_mode"; then - ( cd "$output_objdir" && \ - $RM "${realname}T" && \ - $MV "${realname}U" "$realname" ) - fi - - exit $lt_exit - } - done - IFS=$save_ifs - - # Restore the uninstalled library and exit - if test relink = "$opt_mode"; then - $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? - - if test -n "$convenience"; then - if test -z "$whole_archive_flag_spec"; then - func_show_eval '${RM}r "$gentop"' - fi - fi - - exit $EXIT_SUCCESS - fi - - # Create links to the real library. - for linkname in $linknames; do - if test "$realname" != "$linkname"; then - func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' - fi - done - - # If -module or -export-dynamic was specified, set the dlname. - if test yes = "$module" || test yes = "$export_dynamic"; then - # On all known operating systems, these are identical. - dlname=$soname - fi - fi - ;; - - obj) - if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then - func_warning "'-dlopen' is ignored for objects" - fi - - case " $deplibs" in - *\ -l* | *\ -L*) - func_warning "'-l' and '-L' are ignored for objects" ;; - esac - - test -n "$rpath" && \ - func_warning "'-rpath' is ignored for objects" - - test -n "$xrpath" && \ - func_warning "'-R' is ignored for objects" - - test -n "$vinfo" && \ - func_warning "'-version-info' is ignored for objects" - - test -n "$release" && \ - func_warning "'-release' is ignored for objects" - - case $output in - *.lo) - test -n "$objs$old_deplibs" && \ - func_fatal_error "cannot build library object '$output' from non-libtool objects" - - libobj=$output - func_lo2o "$libobj" - obj=$func_lo2o_result - ;; - *) - libobj= - obj=$output - ;; - esac - - # Delete the old objects. - $opt_dry_run || $RM $obj $libobj - - # Objects from convenience libraries. This assumes - # single-version convenience libraries. Whenever we create - # different ones for PIC/non-PIC, this we'll have to duplicate - # the extraction. - reload_conv_objs= - gentop= - # if reload_cmds runs $LD directly, get rid of -Wl from - # whole_archive_flag_spec and hope we can get by with turning comma - # into space. - case $reload_cmds in - *\$LD[\ \$]*) wl= ;; - esac - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec"; then - eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" - test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` - reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags - else - gentop=$output_objdir/${obj}x - func_append generated " $gentop" - - func_extract_archives $gentop $convenience - reload_conv_objs="$reload_objs $func_extract_archives_result" - fi - fi - - # If we're not building shared, we need to use non_pic_objs - test yes = "$build_libtool_libs" || libobjs=$non_pic_objects - - # Create the old-style object. - reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs - - output=$obj - func_execute_cmds "$reload_cmds" 'exit $?' - - # Exit if we aren't doing a library object file. - if test -z "$libobj"; then - if test -n "$gentop"; then - func_show_eval '${RM}r "$gentop"' - fi - - exit $EXIT_SUCCESS - fi - - test yes = "$build_libtool_libs" || { - if test -n "$gentop"; then - func_show_eval '${RM}r "$gentop"' - fi - - # Create an invalid libtool object if no PIC, so that we don't - # accidentally link it into a program. - # $show "echo timestamp > $libobj" - # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? - exit $EXIT_SUCCESS - } - - if test -n "$pic_flag" || test default != "$pic_mode"; then - # Only do commands if we really have different PIC objects. - reload_objs="$libobjs $reload_conv_objs" - output=$libobj - func_execute_cmds "$reload_cmds" 'exit $?' - fi - - if test -n "$gentop"; then - func_show_eval '${RM}r "$gentop"' - fi - - exit $EXIT_SUCCESS - ;; - - prog) - case $host in - *cygwin*) func_stripname '' '.exe' "$output" - output=$func_stripname_result.exe;; - esac - test -n "$vinfo" && \ - func_warning "'-version-info' is ignored for programs" - - test -n "$release" && \ - func_warning "'-release' is ignored for programs" - - $preload \ - && test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \ - && func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support." - - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library is the System framework - compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` - finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` - ;; - esac - - case $host in - *-*-darwin*) - # Don't allow lazy linking, it breaks C++ global constructors - # But is supposedly fixed on 10.4 or later (yay!). - if test CXX = "$tagname"; then - case ${MACOSX_DEPLOYMENT_TARGET-10.0} in - 10.[0123]) - func_append compile_command " $wl-bind_at_load" - func_append finalize_command " $wl-bind_at_load" - ;; - esac - fi - # Time to change all our "foo.ltframework" stuff back to "-framework foo" - compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - ;; - esac - - - # move library search paths that coincide with paths to not yet - # installed libraries to the beginning of the library search list - new_libs= - for path in $notinst_path; do - case " $new_libs " in - *" -L$path/$objdir "*) ;; - *) - case " $compile_deplibs " in - *" -L$path/$objdir "*) - func_append new_libs " -L$path/$objdir" ;; - esac - ;; - esac - done - for deplib in $compile_deplibs; do - case $deplib in - -L*) - case " $new_libs " in - *" $deplib "*) ;; - *) func_append new_libs " $deplib" ;; - esac - ;; - *) func_append new_libs " $deplib" ;; - esac - done - compile_deplibs=$new_libs - - - func_append compile_command " $compile_deplibs" - func_append finalize_command " $finalize_deplibs" - - if test -n "$rpath$xrpath"; then - # If the user specified any rpath flags, then add them. - for libdir in $rpath $xrpath; do - # This is the magic to use -rpath. - case "$finalize_rpath " in - *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; - esac - done - fi - - # Now hardcode the library paths - rpath= - hardcode_libdirs= - for libdir in $compile_rpath $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs=$libdir - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - func_append rpath " $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) func_append perm_rpath " $libdir" ;; - esac - fi - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) - testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'` - case :$dllsearchpath: in - *":$libdir:"*) ;; - ::) dllsearchpath=$libdir;; - *) func_append dllsearchpath ":$libdir";; - esac - case :$dllsearchpath: in - *":$testbindir:"*) ;; - ::) dllsearchpath=$testbindir;; - *) func_append dllsearchpath ":$testbindir";; - esac - ;; - esac - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir=$hardcode_libdirs - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - compile_rpath=$rpath - - rpath= - hardcode_libdirs= - for libdir in $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs=$libdir - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - func_append rpath " $flag" - fi - elif test -n "$runpath_var"; then - case "$finalize_perm_rpath " in - *" $libdir "*) ;; - *) func_append finalize_perm_rpath " $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir=$hardcode_libdirs - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - finalize_rpath=$rpath - - if test -n "$libobjs" && test yes = "$build_old_libs"; then - # Transform all the library objects into standard objects. - compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` - finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` - fi - - func_generate_dlsyms "$outputname" "@PROGRAM@" false - - # template prelinking step - if test -n "$prelink_cmds"; then - func_execute_cmds "$prelink_cmds" 'exit $?' - fi - - wrappers_required=: - case $host in - *cegcc* | *mingw32ce*) - # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. - wrappers_required=false - ;; - *cygwin* | *mingw* ) - test yes = "$build_libtool_libs" || wrappers_required=false - ;; - *) - if test no = "$need_relink" || test yes != "$build_libtool_libs"; then - wrappers_required=false - fi - ;; - esac - $wrappers_required || { - # Replace the output file specification. - compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` - link_command=$compile_command$compile_rpath - - # We have no uninstalled library dependencies, so finalize right now. - exit_status=0 - func_show_eval "$link_command" 'exit_status=$?' - - if test -n "$postlink_cmds"; then - func_to_tool_file "$output" - postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` - func_execute_cmds "$postlink_cmds" 'exit $?' - fi - - # Delete the generated files. - if test -f "$output_objdir/${outputname}S.$objext"; then - func_show_eval '$RM "$output_objdir/${outputname}S.$objext"' - fi - - exit $exit_status - } - - if test -n "$compile_shlibpath$finalize_shlibpath"; then - compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" - fi - if test -n "$finalize_shlibpath"; then - finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" - fi - - compile_var= - finalize_var= - if test -n "$runpath_var"; then - if test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - func_append rpath "$dir:" - done - compile_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - if test -n "$finalize_perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $finalize_perm_rpath; do - func_append rpath "$dir:" - done - finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - fi - - if test yes = "$no_install"; then - # We don't need to create a wrapper script. - link_command=$compile_var$compile_command$compile_rpath - # Replace the output file specification. - link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` - # Delete the old output file. - $opt_dry_run || $RM $output - # Link the executable and exit - func_show_eval "$link_command" 'exit $?' - - if test -n "$postlink_cmds"; then - func_to_tool_file "$output" - postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` - func_execute_cmds "$postlink_cmds" 'exit $?' - fi - - exit $EXIT_SUCCESS - fi - - case $hardcode_action,$fast_install in - relink,*) - # Fast installation is not supported - link_command=$compile_var$compile_command$compile_rpath - relink_command=$finalize_var$finalize_command$finalize_rpath - - func_warning "this platform does not like uninstalled shared libraries" - func_warning "'$output' will be relinked during installation" - ;; - *,yes) - link_command=$finalize_var$compile_command$finalize_rpath - relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` - ;; - *,no) - link_command=$compile_var$compile_command$compile_rpath - relink_command=$finalize_var$finalize_command$finalize_rpath - ;; - *,needless) - link_command=$finalize_var$compile_command$finalize_rpath - relink_command= - ;; - esac - - # Replace the output file specification. - link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` - - # Delete the old output files. - $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname - - func_show_eval "$link_command" 'exit $?' - - if test -n "$postlink_cmds"; then - func_to_tool_file "$output_objdir/$outputname" - postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` - func_execute_cmds "$postlink_cmds" 'exit $?' - fi - - # Now create the wrapper script. - func_verbose "creating $output" - - # Quote the relink command for shipping. - if test -n "$relink_command"; then - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" - else - func_quote_for_eval "$var_value" - relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" - fi - done - relink_command="(cd `pwd`; $relink_command)" - relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` - fi - - # Only actually do things if not in dry run mode. - $opt_dry_run || { - # win32 will think the script is a binary if it has - # a .exe suffix, so we strip it off here. - case $output in - *.exe) func_stripname '' '.exe' "$output" - output=$func_stripname_result ;; - esac - # test for cygwin because mv fails w/o .exe extensions - case $host in - *cygwin*) - exeext=.exe - func_stripname '' '.exe' "$outputname" - outputname=$func_stripname_result ;; - *) exeext= ;; - esac - case $host in - *cygwin* | *mingw* ) - func_dirname_and_basename "$output" "" "." - output_name=$func_basename_result - output_path=$func_dirname_result - cwrappersource=$output_path/$objdir/lt-$output_name.c - cwrapper=$output_path/$output_name.exe - $RM $cwrappersource $cwrapper - trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 - - func_emit_cwrapperexe_src > $cwrappersource - - # The wrapper executable is built using the $host compiler, - # because it contains $host paths and files. If cross- - # compiling, it, like the target executable, must be - # executed on the $host or under an emulation environment. - $opt_dry_run || { - $LTCC $LTCFLAGS -o $cwrapper $cwrappersource - $STRIP $cwrapper - } - - # Now, create the wrapper script for func_source use: - func_ltwrapper_scriptname $cwrapper - $RM $func_ltwrapper_scriptname_result - trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 - $opt_dry_run || { - # note: this script will not be executed, so do not chmod. - if test "x$build" = "x$host"; then - $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result - else - func_emit_wrapper no > $func_ltwrapper_scriptname_result - fi - } - ;; - * ) - $RM $output - trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 - - func_emit_wrapper no > $output - chmod +x $output - ;; - esac - } - exit $EXIT_SUCCESS - ;; - esac - - # See if we need to build an old-fashioned archive. - for oldlib in $oldlibs; do - - case $build_libtool_libs in - convenience) - oldobjs="$libobjs_save $symfileobj" - addlibs=$convenience - build_libtool_libs=no - ;; - module) - oldobjs=$libobjs_save - addlibs=$old_convenience - build_libtool_libs=no - ;; - *) - oldobjs="$old_deplibs $non_pic_objects" - $preload && test -f "$symfileobj" \ - && func_append oldobjs " $symfileobj" - addlibs=$old_convenience - ;; - esac - - if test -n "$addlibs"; then - gentop=$output_objdir/${outputname}x - func_append generated " $gentop" - - func_extract_archives $gentop $addlibs - func_append oldobjs " $func_extract_archives_result" - fi - - # Do each command in the archive commands. - if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then - cmds=$old_archive_from_new_cmds - else - - # Add any objects from preloaded convenience libraries - if test -n "$dlprefiles"; then - gentop=$output_objdir/${outputname}x - func_append generated " $gentop" - - func_extract_archives $gentop $dlprefiles - func_append oldobjs " $func_extract_archives_result" - fi - - # POSIX demands no paths to be encoded in archives. We have - # to avoid creating archives with duplicate basenames if we - # might have to extract them afterwards, e.g., when creating a - # static archive out of a convenience library, or when linking - # the entirety of a libtool archive into another (currently - # not supported by libtool). - if (for obj in $oldobjs - do - func_basename "$obj" - $ECHO "$func_basename_result" - done | sort | sort -uc >/dev/null 2>&1); then - : - else - echo "copying selected object files to avoid basename conflicts..." - gentop=$output_objdir/${outputname}x - func_append generated " $gentop" - func_mkdir_p "$gentop" - save_oldobjs=$oldobjs - oldobjs= - counter=1 - for obj in $save_oldobjs - do - func_basename "$obj" - objbase=$func_basename_result - case " $oldobjs " in - " ") oldobjs=$obj ;; - *[\ /]"$objbase "*) - while :; do - # Make sure we don't pick an alternate name that also - # overlaps. - newobj=lt$counter-$objbase - func_arith $counter + 1 - counter=$func_arith_result - case " $oldobjs " in - *[\ /]"$newobj "*) ;; - *) if test ! -f "$gentop/$newobj"; then break; fi ;; - esac - done - func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" - func_append oldobjs " $gentop/$newobj" - ;; - *) func_append oldobjs " $obj" ;; - esac - done - fi - func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 - tool_oldlib=$func_to_tool_file_result - eval cmds=\"$old_archive_cmds\" - - func_len " $cmds" - len=$func_len_result - if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then - cmds=$old_archive_cmds - elif test -n "$archiver_list_spec"; then - func_verbose "using command file archive linking..." - for obj in $oldobjs - do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" - done > $output_objdir/$libname.libcmd - func_to_tool_file "$output_objdir/$libname.libcmd" - oldobjs=" $archiver_list_spec$func_to_tool_file_result" - cmds=$old_archive_cmds - else - # the command line is too long to link in one step, link in parts - func_verbose "using piecewise archive linking..." - save_RANLIB=$RANLIB - RANLIB=: - objlist= - concat_cmds= - save_oldobjs=$oldobjs - oldobjs= - # Is there a better way of finding the last object in the list? - for obj in $save_oldobjs - do - last_oldobj=$obj - done - eval test_cmds=\"$old_archive_cmds\" - func_len " $test_cmds" - len0=$func_len_result - len=$len0 - for obj in $save_oldobjs - do - func_len " $obj" - func_arith $len + $func_len_result - len=$func_arith_result - func_append objlist " $obj" - if test "$len" -lt "$max_cmd_len"; then - : - else - # the above command should be used before it gets too long - oldobjs=$objlist - if test "$obj" = "$last_oldobj"; then - RANLIB=$save_RANLIB - fi - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\$concat_cmds$old_archive_cmds\" - objlist= - len=$len0 - fi - done - RANLIB=$save_RANLIB - oldobjs=$objlist - if test -z "$oldobjs"; then - eval cmds=\"\$concat_cmds\" - else - eval cmds=\"\$concat_cmds~\$old_archive_cmds\" - fi - fi - fi - func_execute_cmds "$cmds" 'exit $?' - done - - test -n "$generated" && \ - func_show_eval "${RM}r$generated" - - # Now create the libtool archive. - case $output in - *.la) - old_library= - test yes = "$build_old_libs" && old_library=$libname.$libext - func_verbose "creating $output" - - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" - else - func_quote_for_eval "$var_value" - relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" - fi - done - # Quote the link command for shipping. - relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" - relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` - if test yes = "$hardcode_automatic"; then - relink_command= - fi - - # Only create the output if not a dry run. - $opt_dry_run || { - for installed in no yes; do - if test yes = "$installed"; then - if test -z "$install_libdir"; then - break - fi - output=$output_objdir/${outputname}i - # Replace all uninstalled libtool libraries with the installed ones - newdependency_libs= - for deplib in $dependency_libs; do - case $deplib in - *.la) - func_basename "$deplib" - name=$func_basename_result - func_resolve_sysroot "$deplib" - eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` - test -z "$libdir" && \ - func_fatal_error "'$deplib' is not a valid libtool archive" - func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" - ;; - -L*) - func_stripname -L '' "$deplib" - func_replace_sysroot "$func_stripname_result" - func_append newdependency_libs " -L$func_replace_sysroot_result" - ;; - -R*) - func_stripname -R '' "$deplib" - func_replace_sysroot "$func_stripname_result" - func_append newdependency_libs " -R$func_replace_sysroot_result" - ;; - *) func_append newdependency_libs " $deplib" ;; - esac - done - dependency_libs=$newdependency_libs - newdlfiles= - - for lib in $dlfiles; do - case $lib in - *.la) - func_basename "$lib" - name=$func_basename_result - eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - test -z "$libdir" && \ - func_fatal_error "'$lib' is not a valid libtool archive" - func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" - ;; - *) func_append newdlfiles " $lib" ;; - esac - done - dlfiles=$newdlfiles - newdlprefiles= - for lib in $dlprefiles; do - case $lib in - *.la) - # Only pass preopened files to the pseudo-archive (for - # eventual linking with the app. that links it) if we - # didn't already link the preopened objects directly into - # the library: - func_basename "$lib" - name=$func_basename_result - eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - test -z "$libdir" && \ - func_fatal_error "'$lib' is not a valid libtool archive" - func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" - ;; - esac - done - dlprefiles=$newdlprefiles - else - newdlfiles= - for lib in $dlfiles; do - case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;; - *) abs=`pwd`"/$lib" ;; - esac - func_append newdlfiles " $abs" - done - dlfiles=$newdlfiles - newdlprefiles= - for lib in $dlprefiles; do - case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;; - *) abs=`pwd`"/$lib" ;; - esac - func_append newdlprefiles " $abs" - done - dlprefiles=$newdlprefiles - fi - $RM $output - # place dlname in correct position for cygwin - # In fact, it would be nice if we could use this code for all target - # systems that can't hard-code library paths into their executables - # and that have no shared library path variable independent of PATH, - # but it turns out we can't easily determine that from inspecting - # libtool variables, so we have to hard-code the OSs to which it - # applies here; at the moment, that means platforms that use the PE - # object format with DLL files. See the long comment at the top of - # tests/bindir.at for full details. - tdlname=$dlname - case $host,$output,$installed,$module,$dlname in - *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) - # If a -bindir argument was supplied, place the dll there. - if test -n "$bindir"; then - func_relative_path "$install_libdir" "$bindir" - tdlname=$func_relative_path_result/$dlname - else - # Otherwise fall back on heuristic. - tdlname=../bin/$dlname - fi - ;; - esac - $ECHO > $output "\ -# $outputname - a libtool library file -# Generated by $PROGRAM (GNU $PACKAGE) $VERSION -# -# Please DO NOT delete this file! -# It is necessary for linking the library. - -# The name that we can dlopen(3). -dlname='$tdlname' - -# Names of this library. -library_names='$library_names' - -# The name of the static archive. -old_library='$old_library' - -# Linker flags that cannot go in dependency_libs. -inherited_linker_flags='$new_inherited_linker_flags' - -# Libraries that this one depends upon. -dependency_libs='$dependency_libs' - -# Names of additional weak libraries provided by this library -weak_library_names='$weak_libs' - -# Version information for $libname. -current=$current -age=$age -revision=$revision - -# Is this an already installed library? -installed=$installed - -# Should we warn about portability when linking against -modules? -shouldnotlink=$module - -# Files to dlopen/dlpreopen -dlopen='$dlfiles' -dlpreopen='$dlprefiles' - -# Directory that this library needs to be installed in: -libdir='$install_libdir'" - if test no,yes = "$installed,$need_relink"; then - $ECHO >> $output "\ -relink_command=\"$relink_command\"" - fi - done - } - - # Do a symbolic link so that the libtool archive can be found in - # LD_LIBRARY_PATH before the program is installed. - func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' - ;; - esac - exit $EXIT_SUCCESS -} - -if test link = "$opt_mode" || test relink = "$opt_mode"; then - func_mode_link ${1+"$@"} -fi - - -# func_mode_uninstall arg... -func_mode_uninstall () -{ - $debug_cmd - - RM=$nonopt - files= - rmforce=false - exit_status=0 - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic=$magic - - for arg - do - case $arg in - -f) func_append RM " $arg"; rmforce=: ;; - -*) func_append RM " $arg" ;; - *) func_append files " $arg" ;; - esac - done - - test -z "$RM" && \ - func_fatal_help "you must specify an RM program" - - rmdirs= - - for file in $files; do - func_dirname "$file" "" "." - dir=$func_dirname_result - if test . = "$dir"; then - odir=$objdir - else - odir=$dir/$objdir - fi - func_basename "$file" - name=$func_basename_result - test uninstall = "$opt_mode" && odir=$dir - - # Remember odir for removal later, being careful to avoid duplicates - if test clean = "$opt_mode"; then - case " $rmdirs " in - *" $odir "*) ;; - *) func_append rmdirs " $odir" ;; - esac - fi - - # Don't error if the file doesn't exist and rm -f was used. - if { test -L "$file"; } >/dev/null 2>&1 || - { test -h "$file"; } >/dev/null 2>&1 || - test -f "$file"; then - : - elif test -d "$file"; then - exit_status=1 - continue - elif $rmforce; then - continue - fi - - rmfiles=$file - - case $name in - *.la) - # Possibly a libtool archive, so verify it. - if func_lalib_p "$file"; then - func_source $dir/$name - - # Delete the libtool libraries and symlinks. - for n in $library_names; do - func_append rmfiles " $odir/$n" - done - test -n "$old_library" && func_append rmfiles " $odir/$old_library" - - case $opt_mode in - clean) - case " $library_names " in - *" $dlname "*) ;; - *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; - esac - test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" - ;; - uninstall) - if test -n "$library_names"; then - # Do each command in the postuninstall commands. - func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1' - fi - - if test -n "$old_library"; then - # Do each command in the old_postuninstall commands. - func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1' - fi - # FIXME: should reinstall the best remaining shared library. - ;; - esac - fi - ;; - - *.lo) - # Possibly a libtool object, so verify it. - if func_lalib_p "$file"; then - - # Read the .lo file - func_source $dir/$name - - # Add PIC object to the list of files to remove. - if test -n "$pic_object" && test none != "$pic_object"; then - func_append rmfiles " $dir/$pic_object" - fi - - # Add non-PIC object to the list of files to remove. - if test -n "$non_pic_object" && test none != "$non_pic_object"; then - func_append rmfiles " $dir/$non_pic_object" - fi - fi - ;; - - *) - if test clean = "$opt_mode"; then - noexename=$name - case $file in - *.exe) - func_stripname '' '.exe' "$file" - file=$func_stripname_result - func_stripname '' '.exe' "$name" - noexename=$func_stripname_result - # $file with .exe has already been added to rmfiles, - # add $file without .exe - func_append rmfiles " $file" - ;; - esac - # Do a test to see if this is a libtool program. - if func_ltwrapper_p "$file"; then - if func_ltwrapper_executable_p "$file"; then - func_ltwrapper_scriptname "$file" - relink_command= - func_source $func_ltwrapper_scriptname_result - func_append rmfiles " $func_ltwrapper_scriptname_result" - else - relink_command= - func_source $dir/$noexename - fi - - # note $name still contains .exe if it was in $file originally - # as does the version of $file that was added into $rmfiles - func_append rmfiles " $odir/$name $odir/${name}S.$objext" - if test yes = "$fast_install" && test -n "$relink_command"; then - func_append rmfiles " $odir/lt-$name" - fi - if test "X$noexename" != "X$name"; then - func_append rmfiles " $odir/lt-$noexename.c" - fi - fi - fi - ;; - esac - func_show_eval "$RM $rmfiles" 'exit_status=1' - done - - # Try to remove the $objdir's in the directories where we deleted files - for dir in $rmdirs; do - if test -d "$dir"; then - func_show_eval "rmdir $dir >/dev/null 2>&1" - fi - done - - exit $exit_status -} - -if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then - func_mode_uninstall ${1+"$@"} -fi - -test -z "$opt_mode" && { - help=$generic_help - func_fatal_help "you must specify a MODE" -} - -test -z "$exec_cmd" && \ - func_fatal_help "invalid operation mode '$opt_mode'" - -if test -n "$exec_cmd"; then - eval exec "$exec_cmd" - exit $EXIT_FAILURE -fi - -exit $exit_status - - -# The TAGs below are defined such that we never get into a situation -# where we disable both kinds of libraries. Given conflicting -# choices, we go for a static library, that is the most portable, -# since we can't tell whether shared libraries were disabled because -# the user asked for that or because the platform doesn't support -# them. This is particularly important on AIX, because we don't -# support having both static and shared libraries enabled at the same -# time on that platform, so we default to a shared-only configuration. -# If a disable-shared tag is given, we'll fallback to a static-only -# configuration. But we'll never go from static-only to shared-only. - -# ### BEGIN LIBTOOL TAG CONFIG: disable-shared -build_libtool_libs=no -build_old_libs=yes -# ### END LIBTOOL TAG CONFIG: disable-shared - -# ### BEGIN LIBTOOL TAG CONFIG: disable-static -build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` -# ### END LIBTOOL TAG CONFIG: disable-static - -# Local Variables: -# mode:shell-script -# sh-indentation:2 -# End: diff --git a/bin/objectdir.pl b/bin/objectdir.pl deleted file mode 100644 index 2c18e21b2..000000000 --- a/bin/objectdir.pl +++ /dev/null @@ -1,167 +0,0 @@ -# Emacs should use -*- Perl -*- mode. - -while ($arg = shift) { - if ($arg eq "-x") { - $excluded[$#excluded+1] = shift; - } - else { - $srcdir = $arg; - } -} - -($mydev,$myino,$mymode,$mynlink,$myuid,$mygid,$myrdev,$mysize, - $myatime,$mymtime,$myctime,$myblksize,$myblocks) - = stat("."); - -if (substr($srcdir,0,1) eq "/") { - $topdir = ""; -} -else { - $topdir = "."; -} - -$stubhead = "# Generated by objectdir.pl -- edit at own risk.\n"; - - -if (-d "$srcdir/src") { - local($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size, - $atime,$mtime,$ctime,$blksize,$blocks) - = stat("$srcdir/src"); - mkdir ("src", $mode); -} -else { - die "couldn't find source distribution"; -} -if (-d "$srcdir/src/bin") { - local($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size, - $atime,$mtime,$ctime,$blksize,$blocks) - = stat("$srcdir/src/bin"); - mkdir ("src/bin", $mode); -} -else { - die "couldn't find source distribution"; -} -if (-d "$srcdir/src/lib") { - local($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size, - $atime,$mtime,$ctime,$blksize,$blocks) - = stat("$srcdir/src/lib"); - mkdir ("src/lib", $mode); -} -else { - die "couldn't find source distribution"; -} - -open(MAKEDIRLIST,">Makedirlist"); -open(INCDIRLIST,">src/libintdirlist.h"); - -&dodir("$srcdir",".",$topdir); - -close(MAKEDIRLIST); -close(INCDIRLIST); - -exit; - -sub dodir { - local($dir,$objdir,$topdir) = @_; - local($file); - local(@files); - - #print "In directory $dir\n"; - - opendir(DIR, $dir) || (warn "Can't open $dir: $!\n", return); - @files = readdir(DIR); - closedir(DIR); - - foreach $file (@files) { - if ($file eq "." || $file eq ".." || $file eq "CVS") { - next; - } - - local($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size, - $atime,$mtime,$ctime,$blksize,$blocks) - = stat("$dir/$file"); - - if ($dev == $mydev && $ino == $myino) { next; } - - if (-d "$dir/$file") { - mkdir ("$objdir/$file", $mode); - local($nexttop); - if ($topdir eq ".") { - $nexttop = "../"; - } - elsif ($topdir eq "" ) { - $nexttop = ""; - } - else { - $nexttop = "$topdir../"; - } - &dodir("$dir/$file", "$objdir/$file", $nexttop); - } - elsif ("$file" eq "Makefile" && isobjectdirmake("$dir/$file")) { - #print "Found $dir/Makefile\n"; - local($nextdir); - &domake("$topdir$dir", "$objdir/$file"); - &doconfigfiles("$objdir"); - } - } -} - -sub isobjectdirmake { - local($file) = shift; - open(MAKEFILE,"<$file"); - while () { - if (/SRCDIR/) { - return 1; - } - } - return 0; -} - -sub doconfigfiles { - local($dir) = @_; - $dir =~ s/\.//g; - $dir =~ s/\//_/g; - $dir = uc($dir); - $dir =~ s/^_//; - if ($dir ne "" && ! &excluded($dir)) { - printf MAKEDIRLIST "HAVE_LIBINT_%s=yes\n", $dir; - printf INCDIRLIST "#define HAVE_LIBINT_%s 1\n", $dir; - } -} - -sub domake { - local($topdir, $stubmake) = @_; - - if (-f $stubmake) { - open(STUBMAKE,"<$stubmake"); - local($line) = scalar(); - close(STUBMAKE); - if ($line eq $stubhead) { - print "Overwriting " - } - else { - print "Skipping $stubmake\n"; - return; - } - } - else { - print "Writing "; - } - print "$stubmake\n"; - - open(STUBMAKE,">$stubmake"); - print STUBMAKE "$stubhead"; - print STUBMAKE "SRCDIR = $topdir\n"; - print STUBMAKE "VPATH = \$(SRCDIR)\n"; - print STUBMAKE "include \$(SRCDIR)/Makefile\n"; - close(STUBMAKE); -} - -sub excluded { - my $dir = shift; - my $i; - foreach $i (0..($#excluded)) { - if ($dir eq $excluded[$i]) { return 1; } - } - return 0; -} diff --git a/bin/update_libtool.sh b/bin/update_libtool.sh deleted file mode 100755 index 007151d43..000000000 --- a/bin/update_libtool.sh +++ /dev/null @@ -1,8 +0,0 @@ -#!/bin/sh - -glibtoolize -v --copy --force - -curl 'http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD' > bin/config.guess -curl 'http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD' > bin/config.sub - - diff --git a/cmake/libint2-config.cmake.in b/cmake/libint2-config.cmake.in new file mode 100644 index 000000000..ff419a6f2 --- /dev/null +++ b/cmake/libint2-config.cmake.in @@ -0,0 +1,262 @@ +# libint2-config.cmake +# -------------------- +# +# Libint2 cmake module. +# This module sets the following variables in your project: +# +# :: +# +# Libint2_FOUND - true if Libint2 and all required components found on the system +# Libint2_VERSION - Libint2 version in format Major.Minor.Release +# Libint2_EXT_VERSION - Libint2 version including the (optional) buildid, such as beta.3 +# Libint2_MAX_AM_ERI - maximum angular momentum level of Libint2 libraries +# +# +# Available components: +# +# :: +# +# shared - search for only shared library +# static - search for only static library +# +# onebody_dD_lL - search for library including 1-body integrals with derivative order D (D=0..4) and max angular momentum up to L (L=2..10) +# eri_cC_dD_lL - search for library including 2-body integrals with C (C=2,3,4) centers, derivative order D (D=0..4), and max angular momentum up to L (L=2..10) +# g12_dD-lL - search for library including F12 integrals with Gaussian factors with derivative order D and max angular momentum up to L +# g12dkh_dD-lL - search for library including F12 integrals with Gaussian factors and DKH with derivative order D and max angular momentum up to L (NYI) +# +# impure_sh - search for library that doesn't assume 2- and 3-center integrals involve pure solid harmonics +# +# sph cart shell_set used_by +# -------- -------- --------- ------- +# sss - search for standard + standard + standard = mpqc4 +# sso - search for + orca +# sis - search for + intv3 + standard = mpqc3 +# sio - search for + orca +# sgs - search for + gamess + standard = gamess +# sgo - search for + orca +# sos - search for + orca + standard +# soo - search for + orca = orca +# sbs - search for + bagel + standard = bagel +# sbo - search for + orca +# gss - search for gaussian + standard + standard = psi4 (v1.4, v1.5) +# gso - search for + orca +# gis - search for + intv3 + standard +# gio - search for + orca +# ggs - search for + gamess + standard +# ggo - search for + orca +# gos - search for + orca + standard +# goo - search for + orca +# gbs - search for + bagel + standard +# gbo - search for + orca +# +# C - search for at least Libint2::int2 target +# CXX_ho - search for at least Libint2::cxx target +# CXX - search for at least Libint2::int2-cxx target +# Fortran - search for at least libint_f target (NYI) +# +# +# Exported targets: +# +# :: +# +# If Libint2 is found and no language components are requested, this module +# defines at least the following :prop_tgt:`IMPORTED` target. :: +# +# Libint2::int2 - library with C API +# +# If Libint2 is found, depending on components requested, available +# dependencies, and fullness of the installation, this module defines up to the +# following :prop_tgt:`IMPORTED` targets. :: +# +# Libint2::int2 - library with C API +# Libint2::cxx - Libint2::int2 plus interface to header-only C++11 API +# Libint2::int2-cxx - Libint2::int2 plus compiled C++11 API +# Libint2::fortran (NYI) +# +# +# Suggested usage: +# +# :: +# +# find_package(Libint2) +# find_package(Libint2 2.7.1 CONFIG REQUIRED COMPONENTS shared sss eri_c4_d0_l5 eri_c4_d1_l4) +# +# +# The following variables can be set to guide the search for this package: +# +# :: +# +# Libint2_DIR - CMake variable, set to directory containing this Config file +# CMAKE_PREFIX_PATH - CMake variable, set to root directory of this package +# CMAKE_DISABLE_FIND_PACKAGE_Libint2 - CMake variable, disables +# find_package(Libint2) when not REQUIRED, perhaps to force internal build + +@PACKAGE_INIT@ + +set(pnv libint2) # projectnameversion +set(L2 Libint2) # NameSpace + +set(Libint2_EXT_VERSION "@LIBINT_EXT_VERSION@") + +# make detectable the various cmake modules exported alongside +# * prepend to trump any pre-target FindEigen3.cmake modules lying around +list(PREPEND CMAKE_MODULE_PATH ${CMAKE_CURRENT_LIST_DIR}) + +# check library style component +if(@BUILD_SHARED_LIBS@) # BUILD_SHARED_LIBS + set(${L2}_shared_FOUND 1) +endif() +if(@BUILD_STATIC_LIBS@) # BUILD_STATIC_LIBS + set(${L2}_static_FOUND 1) +endif() +list(FIND ${L2}_FIND_COMPONENTS "shared" _seek_shared) +list(FIND ${L2}_FIND_COMPONENTS "static" _seek_static) + +# check library language component +include(CMakeFindDependencyMacro) + +set(${L2}_C_FOUND 1) +list(FIND ${L2}_FIND_COMPONENTS "C" _seek_C) +if(@REQUIRE_CXX_API@) # REQUIRE_CXX_API + if(NOT TARGET Eigen3::Eigen) + find_dependency(Eigen3 REQUIRED) + endif() + + if (@LIBINT_HAS_SYSTEM_BOOST_PREPROCESSOR_VARIADICS@) + # Boost headers _not_ unpacked to within `include/libint2/` + if (NOT TARGET Boost::headers) + find_dependency(Boost 1.57 REQUIRED) + endif() + else() + if(NOT CMAKE_REQUIRED_QUIET) + message(STATUS "Boost detected. satisfied by headers bundled with ${L2} distribution") + endif() + endif() + + set(${L2}_CXX_ho_FOUND 1) + + if(@REQUIRE_CXX_API_COMPILED@) # REQUIRE_CXX_API_COMPILED + set(${L2}_CXX_FOUND 1) + endif() +endif() +list(FIND ${L2}_FIND_COMPONENTS "CXX_ho" _seek_CXX_ho) +list(FIND ${L2}_FIND_COMPONENTS "CXX" _seek_CXX) +if(@ENABLE_FORTRAN@) # ENABLE_FORTRAN + set(${L2}_Fortran_FOUND 1) +endif() +list(FIND ${L2}_FIND_COMPONENTS "Fortran" _seek_Fortran) + +# check AM & derivative component +set(${L2}_MAX_AM_ERI @Libint2_MAX_AM_ERI@) +foreach(_eri @Libint2_ERI_COMPONENTS@) + set(${L2}_${_eri}_FOUND 1) +endforeach() + +# check pure restriction component +if((@ERI3_PURE_SH@ EQUAL 0) AND (@ERI2_PURE_SH@ EQUAL 0)) # ERI3/ERI2_PURE_SH + set(${L2}_impure_sh_FOUND 1) +endif() +list(FIND ${L2}_FIND_COMPONENTS "impure_sh" _seek_impure_sh) + +# check orderings component: LIBINT_SHGSHELL_ORDERING, LIBINT_CGSHELL_ORDERING, LIBINT_SHELL_SET +if ((@LIBINT_SHGSHELL_ORDERING@ EQUAL 1) AND (@LIBINT_CGSHELL_ORDERING@ EQUAL 1) AND (@LIBINT_SHELL_SET@ EQUAL 1)) + set(_ordering "sss") +elseif((@LIBINT_SHGSHELL_ORDERING@ EQUAL 1) AND (@LIBINT_CGSHELL_ORDERING@ EQUAL 1) AND (@LIBINT_SHELL_SET@ EQUAL 2)) + set(_ordering "sso") +elseif((@LIBINT_SHGSHELL_ORDERING@ EQUAL 1) AND (@LIBINT_CGSHELL_ORDERING@ EQUAL 2) AND (@LIBINT_SHELL_SET@ EQUAL 1)) + set(_ordering "sis") +elseif((@LIBINT_SHGSHELL_ORDERING@ EQUAL 1) AND (@LIBINT_CGSHELL_ORDERING@ EQUAL 2) AND (@LIBINT_SHELL_SET@ EQUAL 2)) + set(_ordering "sio") +elseif((@LIBINT_SHGSHELL_ORDERING@ EQUAL 1) AND (@LIBINT_CGSHELL_ORDERING@ EQUAL 3) AND (@LIBINT_SHELL_SET@ EQUAL 1)) + set(_ordering "sgs") +elseif((@LIBINT_SHGSHELL_ORDERING@ EQUAL 1) AND (@LIBINT_CGSHELL_ORDERING@ EQUAL 3) AND (@LIBINT_SHELL_SET@ EQUAL 2)) + set(_ordering "sgo") +elseif((@LIBINT_SHGSHELL_ORDERING@ EQUAL 1) AND (@LIBINT_CGSHELL_ORDERING@ EQUAL 4) AND (@LIBINT_SHELL_SET@ EQUAL 1)) + set(_ordering "sos") +elseif((@LIBINT_SHGSHELL_ORDERING@ EQUAL 1) AND (@LIBINT_CGSHELL_ORDERING@ EQUAL 4) AND (@LIBINT_SHELL_SET@ EQUAL 2)) + set(_ordering "soo") +elseif((@LIBINT_SHGSHELL_ORDERING@ EQUAL 1) AND (@LIBINT_CGSHELL_ORDERING@ EQUAL 5) AND (@LIBINT_SHELL_SET@ EQUAL 1)) + set(_ordering "sbs") +elseif((@LIBINT_SHGSHELL_ORDERING@ EQUAL 1) AND (@LIBINT_CGSHELL_ORDERING@ EQUAL 5) AND (@LIBINT_SHELL_SET@ EQUAL 2)) + set(_ordering "sbo") +elseif((@LIBINT_SHGSHELL_ORDERING@ EQUAL 2) AND (@LIBINT_CGSHELL_ORDERING@ EQUAL 1) AND (@LIBINT_SHELL_SET@ EQUAL 1)) + set(_ordering "gss") +elseif((@LIBINT_SHGSHELL_ORDERING@ EQUAL 2) AND (@LIBINT_CGSHELL_ORDERING@ EQUAL 1) AND (@LIBINT_SHELL_SET@ EQUAL 2)) + set(_ordering "gso") +elseif((@LIBINT_SHGSHELL_ORDERING@ EQUAL 2) AND (@LIBINT_CGSHELL_ORDERING@ EQUAL 2) AND (@LIBINT_SHELL_SET@ EQUAL 1)) + set(_ordering "gis") +elseif((@LIBINT_SHGSHELL_ORDERING@ EQUAL 2) AND (@LIBINT_CGSHELL_ORDERING@ EQUAL 2) AND (@LIBINT_SHELL_SET@ EQUAL 2)) + set(_ordering "gio") +elseif((@LIBINT_SHGSHELL_ORDERING@ EQUAL 2) AND (@LIBINT_CGSHELL_ORDERING@ EQUAL 3) AND (@LIBINT_SHELL_SET@ EQUAL 1)) + set(_ordering "ggs") +elseif((@LIBINT_SHGSHELL_ORDERING@ EQUAL 2) AND (@LIBINT_CGSHELL_ORDERING@ EQUAL 3) AND (@LIBINT_SHELL_SET@ EQUAL 2)) + set(_ordering "ggo") +elseif((@LIBINT_SHGSHELL_ORDERING@ EQUAL 2) AND (@LIBINT_CGSHELL_ORDERING@ EQUAL 4) AND (@LIBINT_SHELL_SET@ EQUAL 1)) + set(_ordering "gos") +elseif((@LIBINT_SHGSHELL_ORDERING@ EQUAL 2) AND (@LIBINT_CGSHELL_ORDERING@ EQUAL 4) AND (@LIBINT_SHELL_SET@ EQUAL 2)) + set(_ordering "goo") +elseif((@LIBINT_SHGSHELL_ORDERING@ EQUAL 2) AND (@LIBINT_CGSHELL_ORDERING@ EQUAL 5) AND (@LIBINT_SHELL_SET@ EQUAL 1)) + set(_ordering "gbs") +elseif((@LIBINT_SHGSHELL_ORDERING@ EQUAL 2) AND (@LIBINT_CGSHELL_ORDERING@ EQUAL 5) AND (@LIBINT_SHELL_SET@ EQUAL 2)) + set(_ordering "gbo") +else() + message(STATUS "${L2}Config: indeterminate orderings") +endif() +set(${L2}_${_ordering}_FOUND 1) + + +# thanks, https://stackoverflow.com/a/9328525 +function(dump_cmake_variables) + get_cmake_property(_variableNames VARIABLES) + list (SORT _variableNames) + set(founds "") + foreach (_variableName ${_variableNames}) + if (ARGV0) + unset(MATCHED) + string(REGEX MATCH ${ARGV0} MATCHED ${_variableName}) + if (NOT MATCHED) + continue() + endif() + if (NOT ${${_variableName}}) + continue() + endif() + endif() + list(APPEND found ${CMAKE_MATCH_1}) + endforeach() + message(STATUS "${ARGV1}${found}") +endfunction() + + +if(NOT CMAKE_REQUIRED_QUIET) + list(SORT ${L2}_FIND_COMPONENTS COMPARE STRING) + message(STATUS "${L2}Config components requested: ${${L2}_FIND_COMPONENTS}") + dump_cmake_variables("^Libint2_([A-Za-z0-9_]+)_FOUND$" "${L2}Config components found: ") +endif() + +check_required_components(${L2}) + +#----------------------------------------------------------------------------- +# Don't include targets if this file is being picked up by another +# project which has already built this as a subproject +#----------------------------------------------------------------------------- +if(NOT TARGET ${L2}::int2) + if(_seek_static GREATER -1) + include("${CMAKE_CURRENT_LIST_DIR}/${pnv}-targets-static.cmake") + elseif(_seek_shared GREATER -1) + include("${CMAKE_CURRENT_LIST_DIR}/${pnv}-targets-shared.cmake") + elseif(@BUILD_SHARED_LIBS@) # BUILD_SHARED_LIBS + include("${CMAKE_CURRENT_LIST_DIR}/${pnv}-targets-shared.cmake") + elseif(@BUILD_STATIC_LIBS@) # BUILD_STATIC_LIBS + include("${CMAKE_CURRENT_LIST_DIR}/${pnv}-targets-static.cmake") + endif() + + get_property(_loc TARGET ${L2}::int2 PROPERTY LOCATION) + get_property(_ill TARGET ${L2}::int2 PROPERTY INTERFACE_LINK_LIBRARIES) + get_property(_id TARGET ${L2}::int2 PROPERTY INCLUDE_DIRECTORIES) + get_property(_iid TARGET ${L2}::int2 PROPERTY INTERFACE_INCLUDE_DIRECTORIES) + message(DEBUG "Libint2::int2") + message(DEBUG "loc ${_loc}") + message(DEBUG "ill ${_ill}") + message(DEBUG "id ${_id}") + message(DEBUG "iid ${_iid}") +endif() diff --git a/cmake/libint2.pc.cmake.in b/cmake/libint2.pc.cmake.in new file mode 100644 index 000000000..63c260348 --- /dev/null +++ b/cmake/libint2.pc.cmake.in @@ -0,0 +1,10 @@ +prefix=@CMAKE_INSTALL_PREFIX@ +exec_prefix=@CMAKE_INSTALL_PREFIX@ +libdir=@libdir_for_pc_file@ +includedir=@includedir_for_pc_file@ + +Name: libint2 +Description: a library for the evaluation of molecular integrals of many-body operators over Gaussian functions +Version: @PROJECT_VERSION@ +Libs: -L${libdir} -lint2 +Cflags: -I${includedir} -I${includedir}/libint2 diff --git a/export/cmake/modules/AddCustomTargetSubproject.cmake b/cmake/modules/AddCustomTargetSubproject.cmake similarity index 100% rename from export/cmake/modules/AddCustomTargetSubproject.cmake rename to cmake/modules/AddCustomTargetSubproject.cmake diff --git a/cmake/modules/FindEigen3.cmake b/cmake/modules/FindEigen3.cmake new file mode 100644 index 000000000..2a9c9357b --- /dev/null +++ b/cmake/modules/FindEigen3.cmake @@ -0,0 +1,134 @@ +# FindEigen3.cmake +# ---------------- +# +# Eigen3 cmake module to wrap Eigen3 suitable for Libint2. Copied from Eigen v3.4.0 source and modified as follows: +# * Added `NO_CMAKE_PACKAGE_REGISTRY` to `find_package(Eigen3 ...)` to avoid issues with wiped build +# directory when looking for installed eigen. Eigen3 registers its *build* tree with the user package registry. +# * Added `LIBINT_LOCAL_Eigen3_FIND` block to forcibly load hard-coded Eigen3 location detected during Libint2 library build. +# * Move default Eigen3_FIND_VERSION_* from 2.91.0 to 3.0.0 so that it doesn't reject Eigen v3 installations. +# +# - Try to find Eigen3 lib +# +# This module supports requiring a minimum version, e.g. you can do +# find_package(Eigen3 3.1.2) +# to require version 3.1.2 or newer of Eigen3. +# +# Once done this will define +# +# EIGEN3_FOUND - system has eigen lib with correct version +# EIGEN3_INCLUDE_DIR - the eigen include directory +# EIGEN3_VERSION - eigen version +# +# and the following imported target: +# +# Eigen3::Eigen - The header-only Eigen library +# +# This module reads hints about search locations from +# the following environment variables: +# +# EIGEN3_ROOT +# EIGEN3_ROOT_DIR + +# Copyright (c) 2006, 2007 Montel Laurent, +# Copyright (c) 2008, 2009 Gael Guennebaud, +# Copyright (c) 2009 Benoit Jacob +# Redistribution and use is allowed according to the terms of the 2-clause BSD license. + +if(NOT Eigen3_FIND_VERSION) + if(NOT Eigen3_FIND_VERSION_MAJOR) + set(Eigen3_FIND_VERSION_MAJOR 3) + endif() + if(NOT Eigen3_FIND_VERSION_MINOR) + set(Eigen3_FIND_VERSION_MINOR 0) + endif() + if(NOT Eigen3_FIND_VERSION_PATCH) + set(Eigen3_FIND_VERSION_PATCH 0) + endif() + + set(Eigen3_FIND_VERSION "${Eigen3_FIND_VERSION_MAJOR}.${Eigen3_FIND_VERSION_MINOR}.${Eigen3_FIND_VERSION_PATCH}") +endif() + +macro(_eigen3_check_version) + file(READ "${EIGEN3_INCLUDE_DIR}/Eigen/src/Core/util/Macros.h" _eigen3_version_header) + + string(REGEX MATCH "define[ \t]+EIGEN_WORLD_VERSION[ \t]+([0-9]+)" _eigen3_world_version_match "${_eigen3_version_header}") + set(EIGEN3_WORLD_VERSION "${CMAKE_MATCH_1}") + string(REGEX MATCH "define[ \t]+EIGEN_MAJOR_VERSION[ \t]+([0-9]+)" _eigen3_major_version_match "${_eigen3_version_header}") + set(EIGEN3_MAJOR_VERSION "${CMAKE_MATCH_1}") + string(REGEX MATCH "define[ \t]+EIGEN_MINOR_VERSION[ \t]+([0-9]+)" _eigen3_minor_version_match "${_eigen3_version_header}") + set(EIGEN3_MINOR_VERSION "${CMAKE_MATCH_1}") + + set(EIGEN3_VERSION ${EIGEN3_WORLD_VERSION}.${EIGEN3_MAJOR_VERSION}.${EIGEN3_MINOR_VERSION}) + if(${EIGEN3_VERSION} VERSION_LESS ${Eigen3_FIND_VERSION}) + set(EIGEN3_VERSION_OK FALSE) + else() + set(EIGEN3_VERSION_OK TRUE) + endif() + + if(NOT EIGEN3_VERSION_OK) + + message(STATUS "Eigen3 version ${EIGEN3_VERSION} found in ${EIGEN3_INCLUDE_DIR}, " + "but at least version ${Eigen3_FIND_VERSION} is required") + endif() +endmacro() + +if (LIBINT_LOCAL_Eigen3_FIND) + include("${CMAKE_CURRENT_LIST_DIR}/libint2-targets-eigen3.cmake") + + if (TARGET Libint2::Eigen) + get_property(_EIGEN3_INCLUDE_DIRS TARGET Libint2::Eigen PROPERTY INTERFACE_INCLUDE_DIRECTORIES) + list(GET _EIGEN3_INCLUDE_DIRS 0 EIGEN3_INCLUDE_DIR) + + _eigen3_check_version() + set(EIGEN3_FOUND ${EIGEN3_VERSION_OK}) + set(Eigen3_FOUND ${EIGEN3_VERSION_OK}) + + add_library(Eigen3::Eigen ALIAS Libint2::Eigen) + else() + message(STATUS "Eigen3 exact installation detected/used by Libint library build requested " + "from ${CMAKE_CURRENT_LIST_DIR}/libint2-targets-eigen3.cmake but failed.") + endif() + +elseif (EIGEN3_INCLUDE_DIR) + + # in cache already + _eigen3_check_version() + set(EIGEN3_FOUND ${EIGEN3_VERSION_OK}) + set(Eigen3_FOUND ${EIGEN3_VERSION_OK}) + +else () + + # search first if an Eigen3Config.cmake is available in the system, + # if successful this would set EIGEN3_INCLUDE_DIR and the rest of + # the script will work as usual + find_package(Eigen3 ${Eigen3_FIND_VERSION} NO_MODULE QUIET NO_CMAKE_PACKAGE_REGISTRY) + + if(NOT EIGEN3_INCLUDE_DIR) + find_path(EIGEN3_INCLUDE_DIR NAMES signature_of_eigen3_matrix_library + HINTS + ENV EIGEN3_ROOT + ENV EIGEN3_ROOT_DIR + PATHS + ${CMAKE_INSTALL_PREFIX}/include + ${KDE4_INCLUDE_DIR} + PATH_SUFFIXES eigen3 eigen + ) + endif() + + if(EIGEN3_INCLUDE_DIR) + _eigen3_check_version() + endif() + + include(FindPackageHandleStandardArgs) + find_package_handle_standard_args(Eigen3 DEFAULT_MSG EIGEN3_INCLUDE_DIR EIGEN3_VERSION_OK) + + mark_as_advanced(EIGEN3_INCLUDE_DIR) + +endif() + +if(EIGEN3_FOUND AND NOT TARGET Eigen3::Eigen) + add_library(Eigen3::Eigen INTERFACE IMPORTED) + set_target_properties(Eigen3::Eigen PROPERTIES + INTERFACE_INCLUDE_DIRECTORIES "${EIGEN3_INCLUDE_DIR}") +endif() + diff --git a/cmake/modules/FindMultiprecision.cmake b/cmake/modules/FindMultiprecision.cmake new file mode 100644 index 000000000..d7c2e98c9 --- /dev/null +++ b/cmake/modules/FindMultiprecision.cmake @@ -0,0 +1,346 @@ +# FindMultiprecision.cmake +# ------------------------ +# +# GMP, MPIR, MPFR CMake module. +# +# Built upon FindMPFR.cmake by +# Copyright (c) 2006, 2007 Montel Laurent, +# Copyright (c) 2008, 2009 Gael Guennebaud, +# Copyright (c) 2010 Jitse Niesen, +# Copyright (c) 2015 Jack Poulson, +# Redistribution and use is allowed according to the terms of the BSD license. +# +# +## This module supports requiring a minimum version, e.g. you can do +## find_package(MPFR 2.3.0) +## to require version 2.3.0 to newer of MPFR. +## +# This module sets the following variables in your project: +# +# :: +# +# Multiprecision_FOUND - true if all required components of MPFR found on the system with correct version +# MPFR_VERSION - MPFR version if mpfr library detected +# +# +# Available components: +# +# :: +# +# gmp - search for at least Multiprecision::gmp target +# gmpxx - search for at least Multiprecision::gmpxx target +# mpfr - search for at least Multiprecision::mpfr target +# +# +# Exported targets: +# +# :: +# +# If no components are requested, this module defines at least the following +# :prop_tgt:`IMPORTED` target. :: +# +# Multiprecision::gmp - gmp.h and GMP library +# +# Depending on components requested, this module defines up to the following +# :prop_tgt:`IMPORTED` targets. :: +# +# Multiprecision::gmp - gmp.h and C GMP library +# Multiprecision::mpfr - mpfr.h and MPFR library (needs Multiprecision::gmp) +# Multiprecision::gmpxx - gmpxx.h and C++ GMP library (needs Multiprecision::gmp) +# +# +# Suggested usage: +# +# :: +# +# find_package(Multiprecision) +# find_package(Multiprecision 4.0.0 REQUIRED COMPONENTS mpfr) +# +# +# The following variables can be set to guide the search for this package: +# +# :: +# +## Libint2_DIR - CMake variable, set to directory containing this Config file +# CMAKE_PREFIX_PATH - CMake variable, set to root directory of this package +## PATH - environment variable, set to bin directory of this package +## CMAKE_DISABLE_FIND_PACKAGE_Libint2 - CMake variable, disables +## find_package(Libint2) when not REQUIRED, perhaps to force internal build + +# if no components given, act like a FindGMP +list(LENGTH Multiprecision_FIND_COMPONENTS _lcomp) +if (_lcomp EQUAL 0) + list(APPEND Multiprecision_FIND_COMPONENTS gmp) +endif() + +#message("prefix: ${CMAKE_FIND_LIBRARY_PREFIXES}") +#message("suffix: ${CMAKE_FIND_LIBRARY_SUFFIXES}") +if(WIN32) + list(INSERT CMAKE_FIND_LIBRARY_SUFFIXES 0 ".dll") +endif() +#message("suffix: ${CMAKE_FIND_LIBRARY_SUFFIXES}") +#message("root: ${Multiprecision_ROOT}") + +find_path( + MPFR_INCLUDE + NAMES + mpfr.h + PATHS + $ENV{GMPDIR} + $ENV{MPFRDIR} + ${INCLUDE_INSTALL_DIR} + #NO_SYSTEM_ENVIRONMENT_PATH + #NO_CMAKE_SYSTEM_PATH + ) + +# Set MPFR_FIND_VERSION to 1.0.0 if no minimum version is specified +if(NOT MPFR_FIND_VERSION) + if(NOT MPFR_FIND_VERSION_MAJOR) + set(MPFR_FIND_VERSION_MAJOR 1) + endif() + if(NOT MPFR_FIND_VERSION_MINOR) + set(MPFR_FIND_VERSION_MINOR 0) + endif() + if(NOT MPFR_FIND_VERSION_PATCH) + set(MPFR_FIND_VERSION_PATCH 0) + endif() + set(MPFR_FIND_VERSION + "${MPFR_FIND_VERSION_MAJOR}.${MPFR_FIND_VERSION_MINOR}.${MPFR_FIND_VERSION_PATCH}") +endif() + +if(MPFR_INCLUDE) + # Query MPFR_VERSION + file(READ "${MPFR_INCLUDE}/mpfr.h" _mpfr_version_header) + + string(REGEX MATCH "define[ \t]+MPFR_VERSION_MAJOR[ \t]+([0-9]+)" + _mpfr_major_version_match "${_mpfr_version_header}") + set(MPFR_MAJOR_VERSION "${CMAKE_MATCH_1}") + string(REGEX MATCH "define[ \t]+MPFR_VERSION_MINOR[ \t]+([0-9]+)" + _mpfr_minor_version_match "${_mpfr_version_header}") + set(MPFR_MINOR_VERSION "${CMAKE_MATCH_1}") + string(REGEX MATCH "define[ \t]+MPFR_VERSION_PATCHLEVEL[ \t]+([0-9]+)" + _mpfr_patchlevel_version_match "${_mpfr_version_header}") + set(MPFR_PATCHLEVEL_VERSION "${CMAKE_MATCH_1}") + + set(MPFR_VERSION + ${MPFR_MAJOR_VERSION}.${MPFR_MINOR_VERSION}.${MPFR_PATCHLEVEL_VERSION}) + + # Check whether found version exceeds minimum required + if(${MPFR_VERSION} VERSION_LESS ${MPFR_FIND_VERSION}) + set(MPFR_VERSION_OK FALSE) + message(STATUS "MPFR version ${MPFR_VERSION} found in ${MPFR_INCLUDE}, " + "but at least version ${MPFR_FIND_VERSION} is required") + else() + set(MPFR_VERSION_OK TRUE) + endif() +endif() + +# todo Multiprecision/MPFR version + +find_library( + MPFR_LIBRARY + NAMES + mpfr + PATHS + $ENV{GMPDIR} + $ENV{MPFRDIR} + ${LIB_INSTALL_DIR} + PATH_SUFFIXES + bin + ${MPFR_ROOT}/bin + ) + +find_path( + GMP_INCLUDE + NAMES + gmp.h + PATHS + $ENV{GMPDIR} + $ENV{MPFRDIR} + ${INCLUDE_INSTALL_DIR} + #NO_SYSTEM_ENVIRONMENT_PATH + #NO_CMAKE_SYSTEM_PATH + ) + +find_library( + GMP_LIBRARY + NAMES + gmp + PATHS + $ENV{GMPDIR} + $ENV{MPFRDIR} + ${LIB_INSTALL_DIR} + PATH_SUFFIXES + bin + ${MPFR_ROOT}/bin + ) + +find_path( + GMPXX_INCLUDE + NAMES + gmpxx.h + PATHS + $ENV{GMPDIR} + $ENV{MPFRDIR} + ${INCLUDE_INSTALL_DIR} + #NO_SYSTEM_ENVIRONMENT_PATH + #NO_CMAKE_SYSTEM_PATH + ) + +find_library( + GMPXX_LIBRARY + NAMES + gmpxx + gmp # gmp.dll on Win c-f conda package contains cxx (actually a copy of mpir, a drop-in replacement for gmp) + PATHS + $ENV{GMPDIR} + $ENV{MPFRDIR} + ${LIB_INSTALL_DIR} + PATH_SUFFIXES + bin + ${MPFR_ROOT}/bin + ) + +#message("GMP ${GMP_INCLUDE} ${GMP_LIBRARY}") +#message("GMPXX ${GMPXX_INCLUDE} ${GMPXX_LIBRARY}") +#message("MPFR ${MPFR_INCLUDE} ${MPFR_LIBRARY}") +if (GMP_INCLUDE AND GMP_LIBRARY) + set(Multiprecision_gmp_FOUND 1) # Multiprecision::gmp + + if (MPFR_INCLUDE AND MPFR_LIBRARY AND MPFR_VERSION_OK) + set(Multiprecision_mpfr_FOUND 1) # Multiprecision::mpfr + endif() + + if (GMPXX_INCLUDE AND GMPXX_LIBRARY) + set(Multiprecision_gmpxx_FOUND 1) # Multiprecision::gmpxx + endif() +endif() + +# thanks, https://stackoverflow.com/a/9328525 +function(dump_cmake_variables) + get_cmake_property(_variableNames VARIABLES) + list (SORT _variableNames) + set(founds "") + foreach (_variableName ${_variableNames}) + if (ARGV0) + unset(MATCHED) + string(REGEX MATCH ${ARGV0} MATCHED ${_variableName}) + if (NOT MATCHED) + continue() + endif() + if (NOT ${${_variableName}}) + continue() + endif() + endif() + list(APPEND founds ${CMAKE_MATCH_1}) + endforeach() + message(STATUS "${ARGV1}${founds}") +endfunction() + +macro(check_required_components _NAME) + foreach(comp ${${_NAME}_FIND_COMPONENTS}) + if(NOT ${_NAME}_${comp}_FOUND) + if(${_NAME}_FIND_REQUIRED_${comp}) + set(${_NAME}_FOUND FALSE) + endif() + endif() + endforeach() +endmacro() + + +if(NOT CMAKE_REQUIRED_QUIET) + message(STATUS "FindMultiprecision components requested: ${Multiprecision_FIND_COMPONENTS}") + dump_cmake_variables("^Multiprecision_([A-Za-z0-9_]+)_FOUND$" "FindMultiprecision components found: ") +endif() + +set(Multiprecision_FOUND 1) +check_required_components(Multiprecision) +find_package_handle_standard_args( + Multiprecision + REQUIRED_VARS # can be removed upon CMake 3.18 + GMP_LIBRARY + GMP_INCLUDE + Multiprecision_FOUND + VERSION_VAR MPFR_VERSION + HANDLE_COMPONENTS + ) + + +if(WIN32) + string( REPLACE ".lib" ".dll" GMP_LIBRARY_DLL "${GMP_LIBRARY}" ) + string( REPLACE ".lib" ".dll" GMPXX_LIBRARY_DLL "${GMPXX_LIBRARY}" ) + string( REPLACE ".lib" ".dll" MPFR_LIBRARY_DLL "${MPFR_LIBRARY}" ) +endif() + +# now that `find_package(Multiprecision COMPONENTS ...)` will succeed, create targets +if ((Multiprecision_gmp_FOUND EQUAL 1) AND NOT TARGET Multiprecision::gmp) + if (EXISTS "${GMP_LIBRARY_DLL}") + add_library(Multiprecision::gmp SHARED IMPORTED) + set_target_properties( + Multiprecision::gmp + PROPERTIES + IMPORTED_LOCATION "${GMP_LIBRARY_DLL}" + IMPORTED_IMPLIB "${GMP_LIBRARY}" + INTERFACE_INCLUDE_DIRECTORIES "${GMP_INCLUDE}" + IMPORTED_LINK_INTERFACE_LANGUAGES "C" + ) + else() + add_library(Multiprecision::gmp UNKNOWN IMPORTED) + set_target_properties( + Multiprecision::gmp + PROPERTIES + IMPORTED_LOCATION "${GMP_LIBRARY}" + INTERFACE_INCLUDE_DIRECTORIES "${GMP_INCLUDE}" + IMPORTED_LINK_INTERFACE_LANGUAGES "C" + ) + endif() +endif() + +if ((Multiprecision_mpfr_FOUND EQUAL 1) AND NOT TARGET Multiprecision::mpfr) + if (EXISTS "${MPFR_LIBRARY_DLL}") + add_library(Multiprecision::mpfr SHARED IMPORTED) + set_target_properties( + Multiprecision::mpfr + PROPERTIES + IMPORTED_LOCATION "${MPFR_LIBRARY_DLL}" + IMPORTED_IMPLIB "${MPFR_LIBRARY}" + INTERFACE_INCLUDE_DIRECTORIES "${MPFR_INCLUDE}" + INTERFACE_LINK_LIBRARIES Multiprecision::gmp + ) + else() + add_library(Multiprecision::mpfr UNKNOWN IMPORTED) + set_target_properties( + Multiprecision::mpfr + PROPERTIES + IMPORTED_LOCATION "${MPFR_LIBRARY}" + INTERFACE_INCLUDE_DIRECTORIES "${MPFR_INCLUDE}" + INTERFACE_LINK_LIBRARIES Multiprecision::gmp + ) + endif() +endif() + +if ((Multiprecision_gmpxx_FOUND EQUAL 1) AND NOT TARGET Multiprecision::gmpxx) + if (EXISTS "${GMPXX_LIBRARY_DLL}") + add_library(Multiprecision::gmpxx SHARED IMPORTED) + set_target_properties( + Multiprecision::gmp + PROPERTIES + IMPORTED_LOCATION "${GMPXX_LIBRARY_DLL}" + IMPORTED_IMPLIB "${GMPXX_LIBRARY}" + INTERFACE_INCLUDE_DIRECTORIES "${GMPXX_INCLUDE}" + IMPORTED_LINK_INTERFACE_LANGUAGES "CXX" + INTERFACE_LINK_LIBRARIES Multiprecision::gmp + ) + else() + add_library(Multiprecision::gmpxx UNKNOWN IMPORTED) + set_target_properties( + Multiprecision::gmpxx + PROPERTIES + IMPORTED_LOCATION "${GMPXX_LIBRARY}" + INTERFACE_INCLUDE_DIRECTORIES "${GMPXX_INCLUDE}" + IMPORTED_LINK_INTERFACE_LANGUAGES "CXX" + INTERFACE_LINK_LIBRARIES Multiprecision::gmp + ) + endif() +endif() + diff --git a/cmake/modules/JoinPaths.cmake b/cmake/modules/JoinPaths.cmake new file mode 100644 index 000000000..c68d91b84 --- /dev/null +++ b/cmake/modules/JoinPaths.cmake @@ -0,0 +1,23 @@ +# This module provides function for joining paths +# known from most languages +# +# SPDX-License-Identifier: (MIT OR CC0-1.0) +# Copyright 2020 Jan Tojnar +# https://github.com/jtojnar/cmake-snips +# +# Modelled after Python’s os.path.join +# https://docs.python.org/3.7/library/os.path.html#os.path.join +# Windows not supported +function(join_paths joined_path first_path_segment) + set(temp_path "${first_path_segment}") + foreach(current_segment IN LISTS ARGN) + if(NOT ("${current_segment}" STREQUAL "")) + if(IS_ABSOLUTE "${current_segment}") + set(temp_path "${current_segment}") + else() + set(temp_path "${temp_path}/${current_segment}") + endif() + endif() + endforeach() + set(${joined_path} "${temp_path}" PARENT_SCOPE) +endfunction() diff --git a/cmake/modules/autocmake_safeguards.cmake b/cmake/modules/autocmake_safeguards.cmake new file mode 100644 index 000000000..7c0a2a9fd --- /dev/null +++ b/cmake/modules/autocmake_safeguards.cmake @@ -0,0 +1,26 @@ +# Downloaded from +# https://github.com/coderefinery/autocmake/blob/master/modules/safeguards.cmake +# * changed text of in-source message + +#.rst: +# +# Provides safeguards against in-source builds and bad build types. +# +# Variables used:: +# +# PROJECT_SOURCE_DIR +# PROJECT_BINARY_DIR +# CMAKE_BUILD_TYPE + +if(${PROJECT_SOURCE_DIR} STREQUAL ${PROJECT_BINARY_DIR}) + message(FATAL_ERROR "In-source builds not allowed. Please run CMake from top directory and specify a build directory (e.g., cmake -H. -Bbuild).") +endif() + +string(TOLOWER "${CMAKE_BUILD_TYPE}" cmake_build_type_tolower) +string(TOUPPER "${CMAKE_BUILD_TYPE}" cmake_build_type_toupper) + +if(NOT cmake_build_type_tolower STREQUAL "debug" AND + NOT cmake_build_type_tolower STREQUAL "release" AND + NOT cmake_build_type_tolower STREQUAL "relwithdebinfo") + message(FATAL_ERROR "Unknown build type \"${CMAKE_BUILD_TYPE}\". Allowed values are Debug, Release, RelWithDebInfo (case-insensitive).") +endif() diff --git a/cmake/modules/int_am.cmake b/cmake/modules/int_am.cmake new file mode 100644 index 000000000..f4b15a6e4 --- /dev/null +++ b/cmake/modules/int_am.cmake @@ -0,0 +1,363 @@ +# handle the defaulting and setting of the following variables +# * ENABLE_[ONEBODY|ERI2|ERI3|ERI|G12|G12DKH] +# * [LIBINT|ONEBODY|ERI2|ERI3|ERI|G12|G12DKH]_[MAX|OPT]_AM[|_LIST] +# * LIBINT_ONEBODY_DERIV +# * LIBINT_SUPPORTS_ONEBODY +# * SUPPORT_T1G12 + +# _candidate variables not needed for config.h but are used to figure +# out the AM levels at the CMake level so that +# libint2-config.cmake components may be defined and client codes can +# require the detected library include gradient integrals at least AM=5 with +# `find_package(Libint2 COMPONENTS eri_c4_d1_l5)` + + +macro(numerical_max_of_list ansvar liste) + set(_max "-100") + foreach(_i ${liste}) + if (${_i} GREATER _max) + set(_max "${_i}") + endif() + endforeach() + set(${ansvar} "${_max}") +endmacro() + + +message(STATUS "Processing integrals classes ...") + +# <<< overall derivatives level >>> + +set(_glob_classes_derivs ${ENABLE_ONEBODY};${ENABLE_ERI};${ENABLE_ERI3};${ENABLE_ERI2};${ENABLE_G12};${ENABLE_G12DKH}) +numerical_max_of_list(_max_deriv "${_glob_classes_derivs}") +message(STATUS "Preparing highest derivative level ${_max_deriv}") + +# <<< overall max_am defaults >>> + +list(LENGTH WITH_MAX_AM _ntokens_maxam) +if (_ntokens_maxam GREATER 1) + math(EXPR _ntokens_xptd_max_deriv "${_max_deriv} + 1") + if (NOT _ntokens_xptd_max_deriv EQUAL _ntokens_maxam) + message(FATAL_ERROR "Invalid value for WITH_MAX_AM (${WITH_MAX_AM}). Highest ENABLE_ derivative (${_max_deriv}) requires list length ${_ntokens_xptd_max_deriv}, not ${_ntokens_maxam}.") + endif() + + numerical_max_of_list(_max_am "${WITH_MAX_AM}") + list(JOIN WITH_MAX_AM "," _sam) + set(LIBINT_MAX_AM_LIST ${_sam}) + set(LIBINT_MAX_AM ${_max_am}) # only overall LIBINT, not specific integrals classes, sets both MAX_AM & MAX_AM_LIST + set(_max_LIBINT_MAX_AM ${LIBINT_MAX_AM}) +else() + set(LIBINT_MAX_AM_LIST "") + set(LIBINT_MAX_AM ${WITH_MAX_AM}) +endif() + +foreach(_d RANGE 0 ${_max_deriv}) + if (${_d} LESS _ntokens_maxam) + list(GET WITH_MAX_AM ${_d} _candidate0_d${_d}) + else() + set(_candidate0_d${_d} "-1") + endif() + message(VERBOSE "setting _candidate0_d${_d}=${_candidate0_d${_d}}") +endforeach() + +if (LIBINT_MAX_AM GREATER_EQUAL 8) + message(FATAL_ERROR "LIBINT_MAX_AM=${LIBINT_MAX_AM} is greater than 8. Are you sure you know what you are doing?") +elseif (LIBINT_MAX_AM LESS_EQUAL 0) + message(FATAL_ERROR "Invalid value for LIBINT_MAX_AM (${LIBINT_MAX_AM}).") +endif() + +message(STATUS "Preparing generic LIBINT_MAX_AM_LIST ${LIBINT_MAX_AM_LIST} and LIBINT_MAX_AM ${LIBINT_MAX_AM} for integrals class defaults.") + +# <<< overall opt_am defaults >>> + +list(LENGTH WITH_OPT_AM _ntokens_optam) +if (NOT WITH_OPT_AM EQUAL -1) + if (NOT _ntokens_optam EQUAL _ntokens_maxam) + # discard two cases: scalar opt and list max -and- list opt and scalar max + message(FATAL_ERROR "Invalid format for WITH_OPT_AM (${WITH_OPT_AM}). Use the same format and length like `N` or `N0;N1;N2` as WITH_MAX_AM (${WITH_MAX_AM}).") + endif() +endif() +if (_ntokens_optam GREATER 1) + # list opt and list max: use list opt validating aginst max + set(_processed_OPT_AM_LIST ) + math(EXPR _range_limit "${_ntokens_maxam} - 1") + foreach(_d RANGE ${_range_limit}) + list(GET WITH_MAX_AM ${_d} _max_am) + list(GET WITH_OPT_AM ${_d} _opt_am) + if (_opt_am LESS_EQUAL _max_am) + list(APPEND _processed_OPT_AM_LIST ${_opt_am}) + else() + list(APPEND _processed_OPT_AM_LIST ${_max_am}) + endif() + endforeach() + + list(JOIN _processed_OPT_AM_LIST "," LIBINT_OPT_AM_LIST) + numerical_max_of_list(LIBINT_OPT_AM "${_processed_OPT_AM_LIST}") +else() + if(WITH_OPT_AM EQUAL -1) + if (_ntokens_maxam GREATER 1) + # no opt and list max: default list opt from max + set(_processed_OPT_AM_LIST ) + math(EXPR _range_limit "${_ntokens_maxam} - 1") + foreach(_d RANGE ${_range_limit}) + list(GET WITH_MAX_AM ${_d} _max_am) + math(EXPR _opt_am "${_max_am}/2 + 1") + list(APPEND _processed_OPT_AM_LIST ${_opt_am}) + endforeach() + + list(JOIN _processed_OPT_AM_LIST "," LIBINT_OPT_AM_LIST) + numerical_max_of_list(LIBINT_OPT_AM "${_processed_OPT_AM_LIST}") + else() + # no opt and scalar max: default scalar opt from max + set(LIBINT_OPT_AM_LIST "") + math(EXPR LIBINT_OPT_AM "${LIBINT_MAX_AM}/2 + 1") + endif() + else() + # scalar opt and scalar max: use scalar opt validating aginst max + set(LIBINT_OPT_AM_LIST "") + set(LIBINT_OPT_AM ${WITH_OPT_AM}) + + if (LIBINT_OPT_AM GREATER LIBINT_MAX_AM) + set(LIBINT_OPT_AM ${LIBINT_MAX_AM}) + endif() + endif() +endif() + +message(STATUS "Preparing generic LIBINT_OPT_AM_LIST ${LIBINT_OPT_AM_LIST} and LIBINT_OPT_AM ${LIBINT_OPT_AM} for integrals class defaults.") + +# <<< Macro >>> + +macro(process_integrals_class class) + + list(LENGTH ENABLE_${class} _ntokens) + if (NOT _ntokens EQUAL 1) + message(FATAL_ERROR "Invalid value for ENABLE_${class} (${ENABLE_${class}}). Use scalar of maximum derivative level, not list.") + endif() + + if (ENABLE_${class} GREATER_EQUAL 0) + set(INCLUDE_${class} ${ENABLE_${class}}) + + foreach(_d RANGE 0 ${_max_deriv}) + if (${_d} LESS_EQUAL ${INCLUDE_${class}}) + set(_candidate0_${class}_d${_d} ${_candidate0_d${_d}}) + message(VERBOSE "setting _candidate0_${class}_d${_d}=${_candidate0_${class}_d${_d}}") + endif() + endforeach() + + set(LIBINT_SUPPORTS_${class} yes) + set(LIBINT_${class}_DERIV ${INCLUDE_${class}}) + message(STATUS "Enabling integrals class ${class} to derivative ${INCLUDE_${class}}") + else() + set(INCLUDE_${class} "-1") + set(${class}_MAX_AM "") + set(${class}_MAX_AM_LIST "") + message(STATUS "Disabling integrals class ${class}") + endif() + + if (ENABLE_${class} GREATER_EQUAL 0) + list(LENGTH WITH_${class}_MAX_AM _ntokens) + if (_ntokens GREATER 1) + math(EXPR _ntokens_xptd_max_deriv "${INCLUDE_${class}} + 1") + if (NOT _ntokens_xptd_max_deriv EQUAL _ntokens) + message(FATAL_ERROR "Invalid value for WITH_${class}_MAX_AM (${WITH_${class}_MAX_AM}). ENABLE_${class} derivative (${INCLUDE_${class}}) requires list length ${_ntokens_xptd_max_deriv}, not ${_ntokens}.") + endif() + + foreach(_d RANGE ${INCLUDE_${class}}) + list(GET WITH_${class}_MAX_AM ${_d} _candidate_${class}_d${_d}) + message(VERBOSE "setting _candidate_${class}_d${_d}=${_candidate_${class}_d${_d}}") + + if (_candidate_${class}_d${_d} GREATER LIBINT_MAX_AM) + message(FATAL_ERROR "Invalid value for WITH_${class}_MAX_AM derivative element ${_d} (${_candidate_${class}_d${_d}} > ${LIBINT_MAX_AM}).") + # note this check is necessary but insufficient since per-d max may be available from LIBINT_MAX_AM_LIST. + # suggest requiring all WITH_*_AM options to be either `N` or `N0;N1;N2` format for cleaner validation. + elseif (_candidate_${class}_d${_d} LESS_EQUAL 0) + message(FATAL_ERROR "Invalid value for WITH_${class}_MAX_AM derivative element ${_d} (${_candidate_${class}_d${_d}} <= 0).") + endif() + endforeach() + + list(JOIN WITH_${class}_MAX_AM "," ${class}_MAX_AM_LIST) + set(${class}_MAX_AM "") + else() + set(${class}_MAX_AM_LIST "") + if (WITH_${class}_MAX_AM EQUAL -1) + foreach(_d RANGE ${INCLUDE_${class}}) + if (${_candidate0_${class}_d${_d}} EQUAL -1) + set(_candidate_${class}_d${_d} ${_candidate0_${class}_d0}) + else() + set(_candidate_${class}_d${_d} ${_candidate0_${class}_d${_d}}) + endif() + message(VERBOSE "setting _candidate_${class}_d${_d}=${_candidate_${class}_d${_d}}") + endforeach() + + set(${class}_MAX_AM "") + # note: could set class_MAX_AM/LIST from default (in configure.ac, looks like at least scalar var set) + # but philosophy is to set user-only intent and leave further defaulting to compiled code. wrong? + else() + set(${class}_MAX_AM ${WITH_${class}_MAX_AM}) + + foreach(_d RANGE ${INCLUDE_${class}}) + set(_candidate_${class}_d${_d} ${${class}_MAX_AM}) + message(VERBOSE "setting _candidate_${class}_d${_d}=${_candidate_${class}_d${_d}}") + endforeach() + + if (${class}_MAX_AM GREATER_EQUAL 8) + message(FATAL_ERROR "Value for ${class}_MAX_AM too high (${${class}_MAX_AM} >= 8). Are you sure you know what you are doing?") + elseif (${class}_MAX_AM LESS_EQUAL 0) + message(FATAL_ERROR "Invalid value for ${class}_MAX_AM (${${class}_MAX_AM} <= 0).") + endif() + endif() + endif() + if (LIBINT_MAX_AM_LIST) + set(_msg ${LIBINT_MAX_AM_LIST}) + else() + set(_msg ${LIBINT_MAX_AM}) + endif() + message(STATUS "Enabling integrals class ${class} to max AM ${${class}_MAX_AM}${${class}_MAX_AM_LIST} (else ${_msg})") + + list(LENGTH WITH_${class}_OPT_AM _ntokens) + if (_ntokens GREATER 1) + if (NOT _ntokens_xptd_max_deriv EQUAL _ntokens) + message(FATAL_ERROR "Invalid value for WITH_${class}_OPT_AM (${WITH_${class}_OPT_AM}). ENABLE_${class} derivative (${INCLUDE_${class}}) requires list length ${_ntokens_xptd_max_deriv}, not ${_ntokens}.") + endif() + + list(JOIN WITH_${class}_OPT_AM "," ${class}_OPT_AM_LIST) + set(${class}_OPT_AM "") + else() + set(${class}_OPT_AM_LIST "") + if (WITH_${class}_OPT_AM EQUAL -1) + set(${class}_OPT_AM "") + else() + set(${class}_OPT_AM ${WITH_${class}_OPT_AM}) + endif() + endif() + if (LIBINT_OPT_AM_LIST) + set(_msg ${LIBINT_OPT_AM_LIST}) + else() + set(_msg ${LIBINT_OPT_AM}) + endif() + message(STATUS "Enabling integrals class ${class} to opt AM ${${class}_OPT_AM}${${class}_OPT_AM_LIST} (else ${_msg})") + endif() +endmacro() + + +macro(process_integrals_class_alt class) + + list(LENGTH ENABLE_${class} _ntokens) + if (NOT _ntokens EQUAL 1) + message(FATAL_ERROR "Invalid value for ENABLE_${class} (${ENABLE_${class}}). Use scalar of maximum derivative level, not list.") + endif() + + if (ENABLE_${class} GREATER_EQUAL 0) + set(INCLUDE_${class} ${ENABLE_${class}}) + + foreach(_d RANGE 0 ${_max_deriv}) + if (${_d} LESS_EQUAL ${INCLUDE_${class}}) + # no per-d defaults. use energy + set(_candidate0_${class}_d${_d} ${_candidate0_d0}) + message(VERBOSE "setting _candidate0_${class}_d${_d}=${_candidate0_${class}_d${_d}}") + endif() + endforeach() + + set(LIBINT_SUPPORTS_${class} yes) + set(LIBINT_${class}_DERIV ${INCLUDE_${class}}) + message(STATUS "Enabling integrals class ${class} to derivative ${INCLUDE_${class}}") + else() + set(INCLUDE_${class} "-1") + set(${class}_MAX_AM "") + message(STATUS "Disabling integrals class ${class}") + endif() + + if (ENABLE_${class} GREATER_EQUAL 0) + list(LENGTH WITH_${class}_MAX_AM _ntokens) + if (_ntokens GREATER 1) + message(FATAL_ERROR "Invalid value for WITH_${class}_MAX_AM (${WITH_${class}_MAX_AM}). ENABLE_${class} derivative supports only scalar, not list length ${_ntokens}.") + + else() + if (WITH_${class}_MAX_AM EQUAL -1) + foreach(_d RANGE ${INCLUDE_${class}}) + set(_candidate_${class}_d${_d} ${_candidate0_${class}_d0}) + message(VERBOSE "setting _candidate_${class}_d${_d}=${_candidate_${class}_d0}") + endforeach() + + set(_${class}_MAX_AM_pre "") + set(${class}_MAX_AM ${_candidate0_${class}_d0}) + # note: unlike usual classes, C++ code seems to want class_MAX_AM set explicitly to config.h + else() + set(_${class}_MAX_AM_pre ${WITH_${class}_MAX_AM}) + set(${class}_MAX_AM ${WITH_${class}_MAX_AM}) + + foreach(_d RANGE ${INCLUDE_${class}}) + set(_candidate_${class}_d${_d} ${${class}_MAX_AM}) + message(VERBOSE "setting _candidate_${class}_d${_d}=${_candidate_${class}_d${_d}}") + endforeach() + + if (${class}_MAX_AM GREATER_EQUAL 8) + message(FATAL_ERROR "Value for ${class}_MAX_AM too high (${${class}_MAX_AM} >= 8). Are you sure you know what you are doing?") + elseif (${class}_MAX_AM LESS_EQUAL 0) + message(FATAL_ERROR "Invalid value for ${class}_MAX_AM (${${class}_MAX_AM} <= 0).") + endif() + endif() + endif() + message(STATUS "Enabling integrals class ${class} to max AM ${_${class}_MAX_AM_pre} (else ${LIBINT_MAX_AM})") + + list(LENGTH WITH_${class}_OPT_AM _ntokens) + if (_ntokens GREATER 1) + message(FATAL_ERROR "Invalid value for WITH_${class}_OPT_AM (${WITH_${class}_OPT_AM}). ENABLE_${class} derivative supports only scalar, not list length ${_ntokens}.") + + else() + if (WITH_${class}_OPT_AM EQUAL -1) + set(_${class}_OPT_AM_pre "") + set(${class}_OPT_AM ${LIBINT_OPT_AM}) + # note: unlike usual classes, C++ code seems to want class_MAX_AM set explicitly + else() + set(_${class}_OPT_AM_pre ${WITH_${class}_OPT_AM}) + set(${class}_OPT_AM ${WITH_${class}_OPT_AM}) + endif() + endif() + message(STATUS "Enabling integrals class ${class} to opt AM ${_${class}_OPT_AM_pre} (else ${LIBINT_OPT_AM})") + endif() +endmacro() + + +process_integrals_class(ONEBODY) +process_integrals_class(ERI) +process_integrals_class(ERI3) +process_integrals_class(ERI2) +# unlike above, these classes (1) don't do AM_LIST and (2) require value in config.h if enabled +process_integrals_class_alt(G12) +process_integrals_class_alt(G12DKH) + +if (ENABLE_G12 GREATER_EQUAL 0) + set(SUPPORT_T1G12 ${ENABLE_T1G12_SUPPORT}) +else() + set(SUPPORT_T1G12 OFF) +endif() + + +# form list of active class + deriv + max_am strings to use in libint2-config.cmake +set(Libint2_ERI_COMPONENTS "") +foreach(_cls ERI;ERI3;ERI2;ONEBODY;G12;G12DKH) + if (_cls STREQUAL "ERI") + set(_lbl "eri_c4") + elseif (_cls STREQUAL "ERI3") + set(_lbl "eri_c3") + elseif (_cls STREQUAL "ERI2") + set(_lbl "eri_c2") + elseif (_cls STREQUAL "ONEBODY") + set(_lbl "onebody") + elseif (_cls STREQUAL "G12") + set(_lbl "g12") + elseif (_cls STREQUAL "G12DKH") + set(_lbl "g12dkh") + endif() + + if (INCLUDE_${_cls} GREATER -1) + foreach (_d RANGE 0 ${INCLUDE_${_cls}}) + foreach(_l RANGE 2 ${_candidate_${_cls}_d${_d}}) + list(APPEND Libint2_ERI_COMPONENTS "${_lbl}_d${_d}_l${_l}") + message(VERBOSE "setting component ${_lbl}_d${_d}_l${_l}") + endforeach() + endforeach() + endif() +endforeach() +message(STATUS "Library will satisfy ERI AM components: ${Libint2_ERI_COMPONENTS}") + diff --git a/cmake/modules/int_computed.cmake.in b/cmake/modules/int_computed.cmake.in new file mode 100644 index 000000000..c59492914 --- /dev/null +++ b/cmake/modules/int_computed.cmake.in @@ -0,0 +1,46 @@ +# This file communicates top-level CMake configuration results to +# export stage (in a very minor way that could be worked around) and to +# library stage (in a major way). If the superbuild was run continuously +# (generator->export->library), these would be more properly passed +# through the ExternalProject_Add commands. However, since library is +# commonly built separately from tarball, this file is better storage. + +# <<< Build Version >>> + +set(LIBINT_MAJOR_VERSION "@LIBINT_MAJOR_VERSION@") +set(LIBINT_MINOR_VERSION "@LIBINT_MINOR_VERSION@") +set(LIBINT_MICRO_VERSION "@LIBINT_MICRO_VERSION@") +set(LIBINT_VERSION ${LIBINT_MAJOR_VERSION}.${LIBINT_MINOR_VERSION}.${LIBINT_MICRO_VERSION}) + + +# <<< Dev Version >>> + +set(LIBINT_BUILDID "@LIBINT_BUILDID@") +set(LIBINT_EXT_VERSION "@LIBINT_EXT_VERSION@") +message(STATUS "Version: Full ${LIBINT_EXT_VERSION} Numeric ${LIBINT_VERSION}") + + +# <<< ABI Version >>> + +set(LIBINT_CURRENT_SOVERSION "@LIBINT_CURRENT_SOVERSION@") +set(LIBINT_REVISION_SOVERSION "@LIBINT_REVISION_SOVERSION@") +set(LIBINT_AGE_SOVERSION "@LIBINT_AGE_SOVERSION@") + +set(LIBINT_SOVERSION ${LIBINT_CURRENT_SOVERSION}:${LIBINT_REVISION_SOVERSION}:${LIBINT_AGE_SOVERSION}) +math(EXPR LIBINT_MAJOR_SOVERSION "${LIBINT_CURRENT_SOVERSION} - ${LIBINT_AGE_SOVERSION}") +message(STATUS "SO Version: Full ${LIBINT_SOVERSION} Major ${LIBINT_MAJOR_SOVERSION}") + + +# <<< Fixed Orderings >>> + +set(LIBINT2_CARTGAUSS_ORDERING "@LIBINT2_CARTGAUSS_ORDERING@") +set(LIBINT2_SHELL_SET "@LIBINT2_SHELL_SET@") +set(ERI3_PURE_SH "@ERI3_PURE_SH@") +set(ERI2_PURE_SH "@ERI2_PURE_SH@") + + +# <<< AM Components >>> + +set(Libint2_ERI_COMPONENTS "@Libint2_ERI_COMPONENTS@") # for CMake config file +set(Libint2_MAX_AM_ERI "@_candidate_ERI_d0@") # for CMake config file +set(Libint2_ERI_MAX_AM "@_candidate_ERI_d0@") # for features file diff --git a/cmake/modules/int_orderings.cmake b/cmake/modules/int_orderings.cmake new file mode 100644 index 000000000..e7df4675f --- /dev/null +++ b/cmake/modules/int_orderings.cmake @@ -0,0 +1,55 @@ +# handle the setting of the following variables +# * LIBINT_SHGSHELL_ORDERING* +# * LIBINT_CGSHELL_ORDERING* +# * LIBINT_SHELL_SET* + + +# <<< solid harmonic Gaussian orderings >>> + +set(LIBINT_SHGSHELL_ORDERING_STANDARD 1) +set(LIBINT_SHGSHELL_ORDERING_GAUSSIAN 2) + +if (LIBINT2_SHGAUSS_ORDERING STREQUAL "standard") + set(LIBINT_SHGSHELL_ORDERING ${LIBINT_SHGSHELL_ORDERING_STANDARD}) +elseif (LIBINT2_SHGAUSS_ORDERING STREQUAL "gaussian") + set(LIBINT_SHGSHELL_ORDERING ${LIBINT_SHGSHELL_ORDERING_GAUSSIAN}) +else() + message(FATAL_ERROR "Invalid value for LIBINT2_SHGAUSS_ORDERING (${LIBINT2_SHGAUSS_ORDERING})") +endif() + + +# <<< Cartesian Gaussian orderings >>> + +set(LIBINT_CGSHELL_ORDERING_STANDARD 1) +set(LIBINT_CGSHELL_ORDERING_INTV3 2) +set(LIBINT_CGSHELL_ORDERING_GAMESS 3) +set(LIBINT_CGSHELL_ORDERING_ORCA 4) +set(LIBINT_CGSHELL_ORDERING_BAGEL 5) + +if (LIBINT2_CARTGAUSS_ORDERING STREQUAL "standard") + set(LIBINT_CGSHELL_ORDERING ${LIBINT_CGSHELL_ORDERING_STANDARD}) +elseif (LIBINT2_CARTGAUSS_ORDERING STREQUAL "intv3") + set(LIBINT_CGSHELL_ORDERING ${LIBINT_CGSHELL_ORDERING_INTV3}) +elseif (LIBINT2_CARTGAUSS_ORDERING STREQUAL "gamess") + set(LIBINT_CGSHELL_ORDERING ${LIBINT_CGSHELL_ORDERING_GAMESS}) +elseif (LIBINT2_CARTGAUSS_ORDERING STREQUAL "orca") + set(LIBINT_CGSHELL_ORDERING ${LIBINT_CGSHELL_ORDERING_ORCA}) +elseif (LIBINT2_CARTGAUSS_ORDERING STREQUAL "bagel") + set(LIBINT_CGSHELL_ORDERING ${LIBINT_CGSHELL_ORDERING_BAGEL}) +else() + message(FATAL_ERROR "Invalid value for LIBINT2_CARTGAUSS_ORDERING (${LIBINT2_CARTGAUSS_ORDERING})") +endif() + + +# <<< shell subset orderings >>> + +set(LIBINT_SHELL_SET_STANDARD 1) +set(LIBINT_SHELL_SET_ORCA 2) + +if (LIBINT2_SHELL_SET STREQUAL "standard") + set(LIBINT_SHELL_SET ${LIBINT_SHELL_SET_STANDARD}) +elseif (LIBINT2_SHELL_SET STREQUAL "orca") + set(LIBINT_SHELL_SET ${LIBINT_SHELL_SET_ORCA}) +else() + message(FATAL_ERROR "Invalid value for LIBINT2_SHELL_SET (${LIBINT2_SHELL_SET})") +endif() diff --git a/cmake/modules/int_versions.cmake b/cmake/modules/int_versions.cmake new file mode 100644 index 000000000..68fb1c421 --- /dev/null +++ b/cmake/modules/int_versions.cmake @@ -0,0 +1,38 @@ +# top-level CMakeLists.txt has defined: +# * PROJECT_VERSION_{MAJOR|MINOR|PATCH} through `project(... VERSION)` +# * LIBINT_BUILDID +# * LIBINT_SOVERSION + +# note that 3rd version integer is PATCH in CMake and MICRO in Libint + + +# <<< Build Version >>> + +set(LIBINT_MAJOR_VERSION ${PROJECT_VERSION_MAJOR}) +set(LIBINT_MINOR_VERSION ${PROJECT_VERSION_MINOR}) +set(LIBINT_MICRO_VERSION ${PROJECT_VERSION_PATCH}) + +set(LIBINT_VERSION ${LIBINT_MAJOR_VERSION}.${LIBINT_MINOR_VERSION}.${LIBINT_MICRO_VERSION}) + + +# <<< Dev Version >>> + +if (LIBINT_BUILDID) + set(LIBINT_EXT_VERSION ${LIBINT_VERSION}-${LIBINT_BUILDID}) +else() + set(LIBINT_EXT_VERSION ${LIBINT_VERSION}) +endif() + +message(STATUS "Version: Full ${LIBINT_EXT_VERSION} Numeric ${LIBINT_VERSION}") + + +# <<< ABI Version >>> + +string(REPLACE ":" ";" LIBINT_SOVERSION_LIST ${LIBINT_SOVERSION}) + +list(GET LIBINT_SOVERSION_LIST 0 LIBINT_CURRENT_SOVERSION) +list(GET LIBINT_SOVERSION_LIST 1 LIBINT_REVISION_SOVERSION) +list(GET LIBINT_SOVERSION_LIST 2 LIBINT_AGE_SOVERSION) + +math(EXPR LIBINT_MAJOR_SOVERSION "${LIBINT_CURRENT_SOVERSION} - ${LIBINT_AGE_SOVERSION}") +message(STATUS "SO Version: Full ${LIBINT_SOVERSION} Major ${LIBINT_MAJOR_SOVERSION}") diff --git a/cmake/modules/options.cmake b/cmake/modules/options.cmake new file mode 100644 index 000000000..921dc7371 --- /dev/null +++ b/cmake/modules/options.cmake @@ -0,0 +1,187 @@ +### based on https://github.com/psi4/psi4/blob/master/cmake/psi4OptionsTools.cmake + +#Macro for printing an option in a consistent manner +# +#Syntax: print_option(