diff --git a/docs/_static/get-started/ESP32-S3-EYE_3dpcase_btm.STL b/docs/_static/get-started/ESP32-S3-EYE_3dpcase_btm.STL new file mode 100644 index 00000000..034483ed Binary files /dev/null and b/docs/_static/get-started/ESP32-S3-EYE_3dpcase_btm.STL differ diff --git a/docs/_static/get-started/ESP32-S3-EYE_3dpcase_top.STL b/docs/_static/get-started/ESP32-S3-EYE_3dpcase_top.STL new file mode 100644 index 00000000..d55df089 Binary files /dev/null and b/docs/_static/get-started/ESP32-S3-EYE_3dpcase_top.STL differ diff --git a/docs/_static/get-started/S3-eye_banner_photo.png b/docs/_static/get-started/S3-eye_banner_photo.png new file mode 100644 index 00000000..9ef3d3b4 Binary files /dev/null and b/docs/_static/get-started/S3-eye_banner_photo.png differ diff --git a/docs/en/get-started/ESP32-S3-EYE_Getting_Started_Guide.md b/docs/en/get-started/ESP32-S3-EYE_Getting_Started_Guide.md index 5d0db214..69b7d929 100644 --- a/docs/en/get-started/ESP32-S3-EYE_Getting_Started_Guide.md +++ b/docs/en/get-started/ESP32-S3-EYE_Getting_Started_Guide.md @@ -28,6 +28,7 @@ - [5.2. Schematic](#52-schematic) - [5.3. PCB Layout](#53-pcb-layout) - [5.4. Dimensions](#54-dimensions) + - [5.5. 3D Printed Case](#55-3d-printed-case) This user guide will help you get started with ESP32-S3-EYE v2.2 and will also provide more in-depth information. @@ -223,6 +224,7 @@ This section provides instructions on how to do hardware/software setup and flas - 1 x MicroSD card - 1 x Li-ion battery +- 1 x [3D Printed case](#55-3d-printed-case) > **Notice** > @@ -339,4 +341,19 @@ In case this issue occurs, you need to: - [ESP32-S3-EYE-MB v2.1 Main Board Back Dimensions Source File](https://dl.espressif.com/dl/schematics/DXF_ESP32-S3-EYE_MB_Bottom_V2.1_20211111.dxf) (DXF) - You can view it with [Autodesk Viewer](https://viewer.autodesk.com/) online - [ESP32-S3-EYE-SUB Sub Board Dimensions Source File](https://dl.espressif.com/dl/schematics/DXF_ESP32-S3-EYE_SUB_V1.1_20211111.dxf) (DXF) - You can view it with [Autodesk Viewer](https://viewer.autodesk.com/) online +## 5.5. 3D Printed Case + +The following 3D model is a two-part case you can 3D print for your ESP32-S3-EYE. Do note that with all 3D Printed products, there will be a variance in tolerance and fitting. Your success may vary. + +- [ESP32-S3-EYE Top Case](../../_static/get-started/ESP32-S3-EYE_3dpcase_top.STL) +- [ESP32-S3-EYE Bottom Case](../../_static/get-started/ESP32-S3-EYE_3dpcase_btm.STL) + +