From 48ff3be20af8036b7e2bf8844cc37f6598fc06cf Mon Sep 17 00:00:00 2001 From: tankaijie Date: Mon, 20 May 2024 13:59:55 +0800 Subject: [PATCH] Fixed typos and added url --- docs/en/get-started/ESP32-S3-EYE_Getting_Started_Guide.md | 7 ++----- .../get-started/ESP32-S3-EYE_Getting_Started_Guide.md | 5 ++--- 2 files changed, 4 insertions(+), 8 deletions(-) diff --git a/docs/en/get-started/ESP32-S3-EYE_Getting_Started_Guide.md b/docs/en/get-started/ESP32-S3-EYE_Getting_Started_Guide.md index 4b78f1b..69b7d92 100644 --- a/docs/en/get-started/ESP32-S3-EYE_Getting_Started_Guide.md +++ b/docs/en/get-started/ESP32-S3-EYE_Getting_Started_Guide.md @@ -28,7 +28,7 @@ - [5.2. Schematic](#52-schematic) - [5.3. PCB Layout](#53-pcb-layout) - [5.4. Dimensions](#54-dimensions) - - [5.5 3D Printed Case](#55-3d-printed-case) + - [5.5. 3D Printed Case](#55-3d-printed-case) This user guide will help you get started with ESP32-S3-EYE v2.2 and will also provide more in-depth information. @@ -352,11 +352,8 @@ The following 3D model is a two-part case you can 3D print for your ESP32-S3-EYE |![ESP32-S3-EYE - Case 3D printed on BambuLab P1S](../../_static/get-started/S3-eye_banner_photo.png)| |:--:| -|ESP32-S3-EYE - Case 3D printed on BambuLab P1S| +|ESP32-S3-EYE - Case 3D printed on [BambuLab P1S](https://bambulab.com/en/p1)| - - - For further design documentation for the board, please contact us at [](sales@espressif.com). diff --git a/docs/zh_CN/get-started/ESP32-S3-EYE_Getting_Started_Guide.md b/docs/zh_CN/get-started/ESP32-S3-EYE_Getting_Started_Guide.md index 03ca6f1..347e696 100644 --- a/docs/zh_CN/get-started/ESP32-S3-EYE_Getting_Started_Guide.md +++ b/docs/zh_CN/get-started/ESP32-S3-EYE_Getting_Started_Guide.md @@ -28,7 +28,7 @@ - [5.2. 原理图](#52-原理图) - [5.3. PCB 布局图](#53-pcb-布局图) - [5.4. 尺寸图](#54-尺寸图) - - [5.5 3D打印外壳](#55-3D打印外壳) + - [5.5. 3D打印外壳](#55-3D打印外壳) 本指南将帮助您快速上手 ESP32-S3-EYE v2.2，并提供该款开发板的详细信息。 @@ -353,10 +353,9 @@ ESP32-S3-EYE 没有 USB 至 UART 桥接器，可能会出现已烧写的程序 |![ESP32-S3-EYE - 外壳 在拓竹P1S上3D打印](../../_static/get-started/S3-eye_banner_photo.png)| |:--:| -|ESP32-S3-EYE - 外壳 在拓竹P1S上3D打印| +|ESP32-S3-EYE - 外壳 在[拓竹P1S上3D打印](https://bambulab.cn/zh-cn/p1)| - 有关本开发板的更多设计文档，请联系我们的商务部门 [](sales@espressif.com)。